Report - "W class Tram Modernisation" from the ttmrail webpage, 2 A4 sheets stapled in top left hand corner, details the changes - DC Traction chopper system, controllers, inverters, controls, drivers cabins, lighting and drivers and saloon heating systems.trams, tramways, ttm rail, braking, electrical equipment, electrical systems, electrical engineering, controllers, w class

Hall built July 1926, funded mainly by public donation, lighting was originally by kerosene lamps, later 'gloria lights', then a generator, until electricity connected in 1964.Colour photograph of the entry to the Nowa Nowa Community Hall, shows a timber dwelling with gable roof, weather shield over main door. Nowa Nowa Victoria.halls

Yields information the appearance and details about Bridge St shopping area late 1950's and the motor cars in the street at the time.Digital scan from the Ben Parle collection of SEC No.41 in bound in Bridge St, with the destination of Gardens via Drummond Nth. Photo 1950's or early 1960 prior to introduction of dash canopy lighting. Photo received with the Ben Parle slides 09/2004. trams, tramways, bridge st, tram 41

Yields information the appearance and details about No. 35 crossing the railway level crossing.Digital scan from the Ben Parle collection of SEC 35 crossing the railway level crossing, south bound with the destination of Sebastopol . Photo 1950's or early 1960 prior to introduction of dash canopy lighting. Photo received with the Ben Parle slides 09/2004. trams, tramways, lydiard st nth, level crossings, tram 35

Yields information the appearance and details about No. 38 and the intersection at Drummond St South and Sturt. St.Digital scan from the Ben Parle collection of SEC No. 38 turning from Sturt St into Drummond St South, with the destination of Sebastopol. Photo 1950's or early 1960 prior to introduction of dash canopy lighting. Photo received with the Ben Parle slides 09/2004. trams, tramways, sebastopol, drummond st sth, sturt st, tram 38

Bendigo Birneys 28 and 29 in Pall Mall at Charing Cross, no date. Safety zone for passengers has been provided and both trams have been fitted with dash canopy lighting and full striping. Both trams have 'Briquettes' roof advertisements. Early 1960'sniltramways, trams, bendigo, birney, charing cross, tram 28, tram 29

Photograph of SEC tram 17 in Wendoure Parade at depot junction. Tram has the destination of Victoria St. Photographer unknown, during 1950s before the fitting of dash canopy lighting.Yields information about tram 17 during the 1950s and Wendouree Parade.Black and white photograph, with adhesive remnants on the rear.trams, tramways, tram 17, depot junction, wendouree parade.

This item was used before the flexible sigmoidoscope (1996) and before the introduction of fibre optics late 1900s. The 1900s saw an incredible leap forward in the field of medical procedures. The ability to visually see what was happening within the human body (in real time) provided greater analysis about certain biological abnormalities during a greater time elapse than before. This procedure involved less trauma to the patient and greater flexibility to the Physician in treatment schemes. The rigid signoidscope, however provided the first visual of the colon in situ, but was highly invasive to the patient.This item was used in the Mount Beauty Hospital for qualified Physicians to use in their diagnostic evaluation of patients. This would not be an instrument used by a General Physician. This item is still a internal observatory method which may, in some instances, cause some minor complications. This item does point to the level of medical diagnostics, equivalent to those available in larger towns and cities, which brings this rural area (once considered to be an isolated region) to a higher level of medical care.This rigid 35 cm long sigmoidoscope (internal probe) is made of stainless steel outer hollowed rounded rod, which permits the use of both a fixed (very thin) lighting rod and two flexible cord lights access. Both the lighting rod and the flexible lights can be lowered within the main rod to allow the physician to see the colon at the bottom of the rod.These items are all contained within a specifically inlaid wooden box. The box has separate open compartments for the main instruments and a small lidded compartment containing replacement light bulbs. The hollowed tube permits the physician to visually observe the signoid (an S shaped part) of the colon.On the stainless steel main rod body are engraved the lengths of the body,in centimetres ,with numbers starting at the five centimeter mark and then every five centimetres up to the thirty centimetre mark. On the front inside rim of the box are two inlaid white plastic strips with black print, "ALLEN & HANBURYS Ltd" and the other "LONDON"medical diagnostics, sigmoidoscope examinations, medical examinations, hospital equipment

This lamp base would have had a glass chimney clipped to the burner. It is a portable kerosene lamp used in the 19th century and the early 20th century for household lighting before the advent of electricity.This item is retained for display purposes as an example of household lighting a hundred years ago.This is a clear glass lamp base with a metal burner attached to the top. The bottom of the base is hollow. The glass on the stem and bulb is patterned. A BLIXTENvintage household lighting, kerosene lamps

Hand-held kerosene lamps were introduced in the late 1800s for lighting homes prior to the introduction of electricity. This lamp was used in the Bridge Hotel during early European settlement and migration to the area.This lamp is the only example of domestic lighting within the collection. It belongs to the objects relating to the interpretation of Echuca's Bridge Hotel, built by European founder Henry Hopwood.Ornate pressed metal base (4 sided) with floral design. Featuring a ribbed blue glass fuel fount, a four-pronged metal carrier (that would hold a flat cotton wick) with small circular knob (a mechanism for adjusting the wick) and a bulbous clear glass chimney with decorative scalloped edge.lamp, glass, blue glass, kerosene, flat wick, 1800s

Lighting was by gas before electricity was installed in houses. Before the 1800s most homes, workplaces and streets were lit by candles or oil lamps.The cities had gas before the country areas.Gas lighting was available in the Kiewa Valley before electricity was installed.Early 20th century. Gas light used indoors and made of copper tubing, brass, and bakelite.gas lights, home lighting

This image was taken as a part of Paul Lambeth's photography class at the Ballarat School of Mines. Teh exercise including lighting and large camera format with the photographer taking a portrait with a piece of fruit or vegetable. Black and white photograph adhered to card depicting a young man holding a pumpkin.photograph, boy, pumpkin, paul lambeth, tafe

This pressed brass artefact is a highly decorative side bracket for distancing a gas lamp flame from the internal wall of a building. It is hollow and made of light gauge metal, with an innovative aesthetic design, but no internal piping to transport gas. It was recovered from the wreck of the LOCH ARD. There are similar artefacts in the Flagstaff Hill collection. The LOCH ARD left Gravesend (London) on 2 March 1878, bound for Melbourne, with a crew of 37, 17 passengers, and a diverse and valuable cargo of manufactured goods, luxury items, and refined metal. Some of the cargo was destined for display at Melbourne’s first International Exhibition in 1880. At 3 am, 1 June 1878, the ship was wrecked against the high limestone cliffs of Mutton Bird Island on Victoria’s south west coast near Port Campbell. Only two people survived the disaster — Tom Pearce, a male crew member, and Eva Carmichael, a female passenger. The cargo proved too difficult to salvage in the vessel’s exposed condition and was largely written off. The manifest of goods in the LOCH ARD’s holds included “Fittings gas (4 cases)”. The gas lighting of streets, public buildings, and the dwellings of wealthier private citizens was already well-advanced in the cities and major towns of the Australian colonies. In 1841 Sydney was the first to be gas-lit with 23 street lamps, 106 hotel lamps, and 200 private residences connected to the Darlinghurst “gasometer” by an underground network of metal pipes. “The dim days of oil and tallow are gone by!” pronounced one newspaper, flushed with civic pride. The 1850s Gold Rush promoted a similar attitude of confidence and affluence in the Colony of Victoria. In 1855 Melbourne was connected to its own system of subterranean gas pipes despite the same high rates of 25 shillings per 1000 cubic feet being charged, (reduced to 15 shillings in 1865 with cheaper sources of coal). By1858 Kyneton had its own gasworks to light the town (fuelled by eucalyptus leaves) and Geelong followed suit in 1860. Had the LOCH ARD reached its intended destination in 1878, it is probable that the 4 cases of brass gas light fittings on board would have found a ready market.The LOCH ARD shipwreck is of State significance — Victorian Heritage Register S417. The gas light bracket is an example of lamp fittings and plumbing from the late 19th century.A pressed brass lighting bracket recovered from the wreck of the LOCH ARD. It would be used for attaching, but simultaneously offsetting, a gas nozzle to a wall. Highly decorative in an unusually ‘modern’ or ‘art-deco’ style, with sweeping curves dissected by angular geometric pattern, and supporting a short, vertical bar with a gas nozzle on top. It is constructed of light gauge metal, with splitting along seams, and some delicate tracery is missing. Outer surface has been polished, removing sediment, but greenish oxidation remains in dents and joins. warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, gas lamps, gas lighting, gas works, brass fittings, gas pipes, loch ard, 1878 shipwreck, victorian affluence, colonial gas lighting

A Vesta case is a small, portable box / safe to carry matches and came into use around the 1830s and were produced extensively between 1890 and 1920. During this period, almost everyone carried strike anywhere matches, so they could light stoves, lanterns and other devices. Early matches were unreliable and prone to ignite from rubbing on one another or spontaneously. Accordingly, most people carried a match safe / box to house their matches. Wealthy people had match safes made of gold or silver, while common folk had ones made of tin or brass.c1860 A small tin Japanesque vesta case, with a roughened strike plate, to hold matches for lighting fires, lamps, cigarettes or pipes. The tin case has been embossed with a Japanese type bird design on the front and back and then coated with copper and brass to decorate and highlight different parts of the design.Embossed with a Japanese type bird design on the front and back . jewellery, personal effects, craftwork, vesta case, lights, candles, safety matches, moorabbin, brighton, bentleigh, cheltenham, early settlers, pioneers

Coleman Lamp Stove Co Ltd possibly making irons by arrangement with Coleman Lamp & Stove Co Ltd in Canada. Origin of these companies - started by William Coleman of Oklahoma and Kansas, USA. Iron has chrome plated sole - blue enamel body with white speckles and hemispherical tank (probably copper - has typical green verdigris appearance) for the lighting fluid that would have supplied the heat. The wooden handle is painted blue. Top screw is missing from the fuel tank.clothes iron

Francis Powell (1861-) and Francis Hanmer (1858-1925) founded Powell and Hanmer Ltd in the Summer of 1885 for the manufacturer of bike and carriage lamps. Their first advertisements began to appear in November of 1885. In 1890 they lodged a Patent for “velocipede” lamps to be used by lightweight wheeled vehicles propelled by a rider, such as a bike, tricycle and railroad handcar. In April of 1913, they were selling headlamps for cars and in 1914 built their second factory manufacturing dynamo lighting sets in Rocky Lane Birmingham, also for the production of dynamos for motor cars. Then in 1929 Powell and Hanmer Ltd, was acquired by the Lucas company which was at that time the main competitor for the manufacture of non-electrical equipment for cycles and motorcycles. When a director of Powell and Hanmer joined the board of Austin motor cars, Lucas feared that Austins might encourage Powell and Hanmer to start to produce electrical equipment for supply to the company and as a result this association might affect Lucas's business with other large vehicle manufacturers. As a result, Lucas made an offer to Powell & Hanmer and purchased the business for £500,000. Carbide lighting was used in rural and urban areas of Australia which were not served by electrification. Its use began shortly after 1900 in many countries and continued past the 1950s. Calcium carbide pellets were placed in a container outside the home, with water piped to the container and allowed to drip on the pellets releasing acetylene. This gas was piped to lighting fixtures inside the house, where it was burned, creating a very bright flame. Carbide lighting was inexpensive but was prone to gas leaks and explosions. Early models of the automobile, motorbike and bicycles used carbide lamps as headlamps. Acetylene gas, derived from carbide, enabled early automobiles to drive safely at night. Thick concave mirrors combined with magnifying lenses projected the acetylene flame light. These type of lights were used until reliable batteries and dynamos became available, and manufacturers switched to electric lights. Acetylene lamps were also used on riverboats for night navigation. The National Museum of Australia has a lamp made in about 1910 that was used onboard the PS Enterprise, an 1878 Australian paddle steamer, currently owned by the National Museum of Australia in Canberra. It is still operational, and one of the oldest working paddle steamers in the world, listed on the Australian Register of Historic Vehicles.Acetylene Carbide lamp, Model “Panther” distinct patterned side red and green lenses. These lamps were also known as acetylene gas lamps. They work off a chemical reaction between calcium carbide and water.Model 75flagstaff hill, warrnambool, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, carbide lamp, motor vehicle, bike lamp, lighting, vehicle lighting, powell, hanmer, acetylene gas lamp, early lighting

There is no known history attached to this item. Lamps such as this one were common household items in the 19th century and the first three decades of the 20th century until electrical lighting became common in most households. This item has no known local provenance but it is useful for display as an item that was common in households in the past. This item has a cast iron base in a pyramidal shape with the four sides having identical scrolls and star shapes. A piece of brass attaches the base to a violet-coloured bowl. The bowl contains a white wick. The brass wick holder has an external knob for regulating the light intensity. There is more brass between the bowl and the mantle which is made of plain glass. On the base of the lamp: ‘Rd. No. 207869’ history of warrnambool, social history, ruby glass kerosene lamp

There is no known history connected to this item. A spirit lamp was an essential household item in the 19th century and the first three decades of the 20th century until electric lighting became a common feature of most homes. This lamp has no particular significance and is suitable for display as an example of family life in the past.This is a spirit lamp with a milk glass base in two sections (two pedestals in rings). The bowl is made of green glass emulating the shape of the base. There is a brass section connecting the bowl to the wick holder with the wick exposed. There is a small knob or handle external to the bowl for controlling the wick’s use. The clear glass lamp mantle is slim-line bulbous shaped. history of warrnambool, social history, spirit lamp

An item of this type would have been used for lighting purposes by householders both within and around the house in the 19th and early 20th centuries. It may have originally been attached to a wall or ledge. This item has no known local provenance but is retained as an example of a lighting mechanism some 100 years ago.This is the main body of a kerosene lamp. It is made of metal and the base and back stand have been painted green. It has a mantle, an oil container and a round reflector plate (which has been originally painted silver). The glass bulb is missing.N (?) 23 Victorvintage lighting, kerosene lamps

A match holder was a common item 100 years ago and more, as it was used by those who smoked and was often kept on the person for this purpose or as a handy object for lighting lamps etc. It has no known provenance. This container is of minor interest as an example of a household item of the past and is kept for display purposes.This is a small silver-coloured metal container with a lift-up lid. The metal is pressed into an ornamental pattern. Inside the container is part of an old matchstick.Rd. 168192warrnambool history, household items

Candle stick holders were used to hold and display candles for light. They were used before commonly in domestic situations before lighting from kerosene, gas and electricity was freely available and affordable.This is an example of lighting used commonly before the late 19th century.Candle stick holder enamel grey speckled with dish base, side handle and fixture for holding candle.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, domestic lighting, candle, candlestick, candle holder, light

Research provided by Stuart Tompkins Studio, Box Hill, into alternatives for median strip street lighting to be used in Burke Road, Kew. The photographers identified variants in different suburbs appropriate to Kew's needs. The series from which the photograph is drawn provides a snapshot by a commercial photographic studio of each named vicinity in 1965 as well as providing examples of public works infrastructure being commissioned by local government in the 1960s. The photos originally formed part of the Engineering Department's files in the City of Kew before being donated to the kew Historical Society.Electricity Supply Poles, Warrigal Road, Holmesglen, 1965. Stuart Tompkins Studio provided this photograph for the Kew City Council. The photograph of Warrigal Road, north of Holmesglen looking north depicts wooden poles with bracket light fittings. These were the same as those proposed for Kew, except the lights and fittings were not to be 350 watt. Mercury lamps were preferred. [There are three copies of this photograph in the Collection.] Typed inscription on reverse: "Electricity Supply Poles. Photographed for Kew City Council 8/2/65. No.3 Warrigal Road - North of Holmesglen looking north. Wooden poles with bracket fittings same as those proposed for Kew except lights and fittings are not for 250 watt c. c. mercury lamps proposed. Wooden pole 3' up 11 3/4" dia." Studio stamp: "Stuart Tompkins Studio. 547 Station Street, Box Hill. WX1439."stuart tompkins studio, warrigal road (holmesglen) 1965, street lighting

Research provided by Stuart Tompkins Studio, Box Hill, into alternatives for median strip street lighting to be used in Burke Road, Kew. The photographers identified variants in different suburbs appropriate to Kew's needs. The series from which the photograph is drawn provides a snapshot by a commercial photographic studio of each named vicinity in 1965 as well as providing examples of public works infrastructure being commissioned by local government in the 1960s. The photos originally formed part of the Engineering Department's files in the City of Kew before being donated to the kew Historical Society.Electricity Supply Poles, Warrigal Road, Holmesglen, 1965. Stuart Tompkins Studio provided this photograph for the Kew City Council. The photograph of Warrigal Road, north of Holmesglen looking north depicts wooden poles with bracket light fittings. These were the same as those proposed for Kew, except the lights and fittings were not to be 350 watt. Mercury lamps were preferred. [There are three copies of this photograph in the Collection.] Typed inscription on reverse: "Electricity Supply Poles. Photographed for Kew City Council 8/2/65. No.3 Warrigal Road - North of Holmesglen looking north. Wooden poles with bracket fittings same as those proposed for Kew except lights and fittings are not for 250 watt c. c. mercury lamps proposed. Wooden pole 3' up 11 3/4" dia." Studio stamp: "Stuart Tompkins Studio. 547 Station Street, Box Hill. WX1439."stuart tompkins studio, warrigal road (holmesglen) 1965, street lighting

Research provided by Stuart Tompkins Studio, Box Hill, into alternatives for median strip street lighting to be used in Burke Road, Kew. The photographers identified variants in different suburbs appropriate to Kew's needs.The series from which the photograph is drawn provides a snapshot by a commercial photographic studio of each named vicinity in 1965 as well as providing examples of public works infrastructure being commissioned by local government in the 1960s. The photos originally formed part of the Engineering Department's files in the City of Kew before being donated to the kew Historical Society.Electricity Supply Poles, South Road, Moorabbin, 1965. Stuart Tompkins Studio provided this photograph for the Kew City Council. The photograph of South Road, Moorabbin, west of Jasper Road, looking east depicts steel poles with two lamps in a median strip and supply wires from pole to pole. The poles were described as 100′ apart. The notation on the rear of the photograph was that there were lamps along the median strip except at intersections. A wooden pole is recognised as supporting heavy supply lines across the road. The steel poles in the photograph were said to be between 3′ to 3.5′ whereas the wooden poles were three to 12.25″ in diameter. [There are three copies of this photograph in the Collection.] Typed inscription on reverse: "Electricity Supply Poles. Photographed for Kew City Council 8/2/65. No.2 South Road - Moorabbin, west of Jasper Road, looking east. Steel poles with two lamps in median strip and supply wires from pole to pole along median strip (poles only 100' apart). Lamps along median only except at intersections. Wooden pole supports heavy supply lines across the road. Wooden poles 3' up and 8 1/2" dia. Wooden poles 3' up and 12 1/2 dia." Studio stamp: "Stuart Tompkins Studio. 547 Station Street, Box Hill. WX1439."public infrastructure -- kew (vic.), city of kew - engineers department

Research provided by Stuart Tompkins Studio, Box Hill, into alternatives for median strip street lighting to be used in Burke Road, Kew. The photographers identified variants in different suburbs appropriate to Kew's needs.The series from which the photograph is drawn provides a snapshot by a commercial photographic studio of each named vicinity in 1965 as well as providing examples of public works infrastructure being commissioned by local government in the 1960s. The photos originally formed part of the Engineering Department's files in the City of Kew before being donated to the kew Historical Society.Electricity Supply Poles, South Road, Moorabbin, 1965. Stuart Tompkins Studio provided this photograph for the Kew City Council. The photograph of South Road, Moorabbin, west of Jasper Road, looking east depicts steel poles with two lamps in a median strip and supply wires from pole to pole. The poles were described as 100′ apart. The notation on the rear of the photograph was that there were lamps along the median strip except at intersections. A wooden pole is recognised as supporting heavy supply lines across the road. The steel poles in the photograph were said to be between 3′ to 3.5′ whereas the wooden poles were three to 12.25″ in diameter. [There are three copies of this photograph in the Collection.] Typed inscription on reverse: "Electricity Supply Poles. Photographed for Kew City Council 8/2/65. No.2 South Road - Moorabbin, west of Jasper Road, looking east. Steel poles with two lamps in median strip and supply wires from pole to pole along median strip (poles only 100' apart). Lamps along median only except at intersections. Wooden pole supports heavy supply lines across the road. Wooden poles 3' up and 8 1/2" dia. Wooden poles 3' up and 12 1/2 dia." Studio stamp: "Stuart Tompkins Studio. 547 Station Street, Box Hill. WX1439."city of kew -- engineers department, public infrastructure -- kew (vic.)

Research provided by Stuart Tompkins Studio, Box Hill, into alternatives for median strip street lighting to be used in Burke Road, Kew. The photographers identified variants in different suburbs appropriate to Kew's needs.The series from which the photograph is drawn provides a snapshot by a commercial photographic studio of each named vicinity in 1965 as well as providing examples of public works infrastructure being commissioned by local government in the 1960s. The photos originally formed part of the Engineering Department's files in the City of Kew before being donated to the kew Historical Society.Electricity Supply Poles, South Road, Moorabbin, 1965. Stuart Tompkins Studio provided this photograph for the Kew City Council. The photograph of South Road, Moorabbin, west of Jasper Road, looking east depicts steel poles with two lamps in a median strip and supply wires from pole to pole. The poles were described as 100′ apart. The notation on the rear of the photograph was that there were lamps along the median strip except at intersections. A wooden pole is recognised as supporting heavy supply lines across the road. The steel poles in the photograph were said to be between 3′ to 3.5′ whereas the wooden poles were three to 12.25″ in diameter. [There are three copies of this photograph in the Collection.] Typed inscription on reverse: "Electricity Supply Poles. Photographed for Kew City Council 8/2/65. No.2 South Road - Moorabbin, west of Jasper Road, looking east. Steel poles with two lamps in median strip and supply wires from pole to pole along median strip (poles only 100' apart). Lamps along median only except at intersections. Wooden pole supports heavy supply lines across the road. Wooden poles 3' up and 8 1/2" dia. Wooden poles 3' up and 12 1/2 dia." Studio stamp: "Stuart Tompkins Studio. 547 Station Street, Box Hill. WX1439."stuart tompkins studio, street lighting, south road (moorabin) 1965, public infrastructure -- city of kew, city of kew -- engineer's department

Research provided by Stuart Tompkins Studio, Box Hill, into alternatives for median strip street lighting to be used in Burke Road, Kew. The photographers identified variants in different suburbs appropriate to Kew's needs.The series from which the photograph is drawn provides a snapshot by a commercial photographic studio of each named vicinity in 1965 as well as providing examples of public works infrastructure being commissioned by local government in the 1960s. The photos originally formed part of the Engineering Department's files in the City of Kew before being donated to the kew Historical Society.Electricity Supply Poles, North Road, Ormond, 1965. Electricity supply poles photographed for the Kew City Council by Stuart Tompkins Studio. The photograph of North Road, Ormond west of Jasper Road, looking east depicts wooden poles carrying two lamps in a median strip and with two on each side alternately. It was noted that the supply wires were from one side only. The poles were described as 3′ above ground and 11.25″ in diameter. The plan was to use this approach for Burke Road, Kew. [There are three copies of this photograph in the Collection.] Typed inscription on reverse: "Electricity Supply Poles. Photographed for Kew City Council 8/2/65. No.1 North Road - Ormond, west of Jasper Road, looking east. Wooden poles carrying two lamps in median strip and two on each side alternately just as is proposed for Burke Road, Kew. Supply wires from one side only. Poles 3' above ground 11 1/4" dia." Studio stamp: "Stuart Tompkins Studio. 547 Station Street, Box Hill. WX1439."stuart tompkins studio, street lighting, south road (moorabin) 1965, public infrastructure -- city of kew, city of kew -- engineer's department

Research provided by Stuart Tompkins Studio, Box Hill, into alternatives for median strip street lighting to be used in Burke Road, Kew. The photographers identified variants in different suburbs appropriate to Kew's needs.The series from which the photograph is drawn provides a snapshot by a commercial photographic studio of each named vicinity in 1965 as well as providing examples of public works infrastructure being commissioned by local government in the 1960s. The photos originally formed part of the Engineering Department's files in the City of Kew before being donated to the kew Historical Society.Electricity Supply Poles, North Road, Ormond, 1965. Electricity supply poles photographed for the Kew City Council by Stuart Tompkins Studio. The photograph of North Road, Ormond west of Jasper Road, looking east depicts wooden poles carrying two lamps in a median strip and with two on each side alternately. It was noted that the supply wires were from one side only. The poles were described as 3′ above ground and 11.25″ in diameter. The plan was to use this approach for Burke Road, Kew. [There are three copies of this photograph in the Collection.] Typed inscription on reverse: "Electricity Supply Poles. Photographed for Kew City Council 8/2/65. No.1 North Road - Ormond, west of Jasper Road, looking east. Wooden poles carrying two lamps in median strip and two on each side alternately just as is proposed for Burke Road, Kew. Supply wires from one side only. Poles 3' above ground 11 1/4" dia." Studio stamp: "Stuart Tompkins Studio. 547 Station Street, Box Hill. WX1439."stuart tompkins studio, street lighting, south road (moorabin) 1965

Research provided by Stuart Tompkins Studio, Box Hill, into alternatives for median strip street lighting to be used in Burke Road, Kew. The photographers identified variants in different suburbs appropriate to Kew's needs.The series from which the photograph is drawn provides a snapshot by a commercial photographic studio of each named vicinity in 1965 as well as providing examples of public works infrastructure being commissioned by local government in the 1960s. The photos originally formed part of the Engineering Department's files in the City of Kew before being donated to the kew Historical Society.Electricity Supply Poles, North Road, Ormond, 1965. Electricity supply poles photographed for the Kew City Council by Stuart Tompkins Studio. The photograph of North Road, Ormond west of Jasper Road, looking east depicts wooden poles carrying two lamps in a median strip and with two on each side alternately. It was noted that the supply wires were from one side only. The poles were described as 3′ above ground and 11.25″ in diameter. The plan was to use this approach for Burke Road, Kew. [There are three copies of this photograph in the Collection.] Typed inscription on reverse: "Electricity Supply Poles. Photographed for Kew City Council 8/2/65. No.1 North Road - Ormond, west of Jasper Road, looking east. Wooden poles carrying two lamps in median strip and two on each side alternately just as is proposed for Burke Road, Kew. Supply wires from one side only. Poles 3' above ground 11 1/4" dia." Studio stamp: "Stuart Tompkins Studio. 547 Station Street, Box Hill. WX1439."stuart tompkins studio, street lighting, south road (moorabin) 1965

Research provided by Stuart Tompkins Studio, Box Hill, into alternatives for median strip street lighting to be used in Burke Road, Kew. The photographers identified variants in different suburbs appropriate to Kew's needs.The series from which the photograph is drawn provides a snapshot by a commercial photographic studio of each named vicinity in 1965 as well as providing examples of public works infrastructure being commissioned by local government in the 1960s. The photos originally formed part of the Engineering Department's files in the City of Kew before being donated to the kew Historical Society.Electricity Supply Poles, Burke Road, Kew, 1965. This photograph of Burke Road, Kew was taken just north of Kilby and Doncaster Roads looking north. Stuart Tompkins Studio provided the photograph for the Kew City Council. In the photograph are a number of electricity supply poles that have been erected in the median strip, in addition to some new poles on each footpath. The nearest wooden pole is stated to be 13.5″ in diameter. The electricity poles in Burke Road required Kew Council to investigate comparable designs in other Melbourne municipalities. [There are three copies of this photograph in the Collection.] Typed inscription on reverse: "Electricity Supply Poles. Photographed for Kew City Council 8/2/65. No.5 Burke Road - Kew, just north of Kilby and Doncaster Roads looking north. Some of seven poles already erected in median strip. Shows also some new poles erected on each footpath. Nearest wooden pole 13 1/2" dia." Studio stamp: "Stuart Tompkins Studio. 547 Station Street, Box Hill. WX1439."stuart tompkins studio, street lighting, south road (moorabin) 1965