Showing 297 items
matching metal hats
-
Ringwood RSL Sub-Branch
Headgear Navy Slouch Hat, Feb.2010
Fur Felt Slouch Hat as issued to the Royal Australian Navy. Navy Blue Pugaree and blue metal badge with QE11 Crown.Akubra C.C. 21 JS February 2010 -
Numurkah & District Historical Society
Textile - Victorian Railway Guard Hat
Victorian Railway Guard Hat, Navy cloth with black face brim. Has black band around the base of the hat. Red interior lined Metal Badge Guard 401 -
Ambulance Victoria Museum
Badge, Hat, South Australian Ambulance Service, A.J.Parkes, unknown
Silver coloured metal badge with decoration on front surface in white, blue, green, yellow and red enamel. At back are two metal loops and separate metal pins for use in attaching the badge to a hat. ON FRONT;Image of a bird (Shrike) symbolising the South Australian Ambulance Service ON REAR " A. J Parkes" (Manufacturer)badge -
8th/13th Victorian Mounted Rifles Regimental Collection
Badge - Dancing devils
The 13th Light Horse Regiment considered themselves to be the 'Devil's Own' owing to their number 13 designation, consequently when in Egypt in 1915 they commissioned local metal workers to produce unofficial hat and lapel badges. The 13th Light Horse Regiment (AIF) was raised at Broadmeadows Victoria in March 1915. Following service at Gallipoli the regiment was broken up with squadrons going to France as Divisional Cavalry Squadrons of 2nd, 4th and 5th Divisions. The regiment was reformed as firstly 1st Anzac Corps Mounted Troops and later Australian Corps Mounted Troops. The regiment was raised as 13th Light Horse (Gippsland), a Citizen Forces unit. following WWI, and trained as a cavalry regiment till August 1940, when it converted from horse to mechanised initially as 13th Motor Regiment then 13th Armoured Regiment. It trained in Victoria and Queensland but as the Japanese threat to the mainland declined, it was disbanded in October 1943 with men going to other units. The 10th Light Horse was raised in 1903 from Victorian Mounted Rifles companies in Gippsland. In 1912 the regiment was renumbered 13th Light Horse. In 1920 the regiment had the territorial title Gippsland Light Horse added. The regiment was raised as 13th Light Horse (Gippsland), a Citizen Forces unit. In 1940 the regiment converted from horse to mechanised, initially as 13th Motor Regiment then 13th Armoured Regiment. It trained in Victoria and Queensland but as the Japanese threat to the mainland declined, was disbanded in October 1943 with men going to other units. Fabric covered board with Dancing Devil hat badge and two lapel badges attached, also a paper label. The attached label relates to a previous display when the badges were displayed alongside a uniform.world war one, wwi, 13th, light horse, badge, devil -
8th/13th Victorian Mounted Rifles Regimental Collection
Badge - 8/13 VMR badges
The 8th/13th Victorian Mounted Rifles was raised as a regiment of the Royal Australian Armoured Corps on 1 May 1948 with Headquarters in Melbourne and squadrons in Sale, Benalla/Wangaratta and Albury. In 1955 Regimental Headquarters moved to Wangaratta and a second squadron was located at Albury. The Sale squadron transferred to 4th/19th Prince of Wales’s Light Horse. In 1977 8/13 VMR Regiment was reduced to an independent squadron A Squadron 8th/13th Victorian Mounted Rifles and in 1991 was linked with 4th/19th Prince of Wales’s Light Horse forming the VMR Squadron of that regiment.Red fabric covered display board with 8/13 Victorian Mounted Rifles hat badge, two lapel badges and two metal shoulder titles. Item 2491 co-located is a similar object.badge, vmr, victorian -
8th/13th Victorian Mounted Rifles Regimental Collection
Badge - 1st Armoured Regiment badges
The 1st Armoured Regiment was raised on 7 July 1949, as part of the new Australian Regular Army. It served in Vietnam 1968-1971.Set of hat badge, two lapel badges and metal shoulder title of 1st Armoured Regiment displayed on fabric covered boardarmour, badge, vietnam -
8th/13th Victorian Mounted Rifles Regimental Collection
Decorative object - 8LH template
This object was originally made for and affixed to a memorial rock at Beersheba Barracks Sisley Avenue Wangaratta. When 8/13 Victorian Mounted Rifles departed Beersheba Barracks, the panel was removed with the intention of placing it in another location. This did not occur so the panel is held in the Heritage Collection.Two piece metal cutout of the 8th Light Horse hat badge.8th, light horse, wamgaratta, rock, beersheba -
8th/13th Victorian Mounted Rifles Regimental Collection
Badge - LH regimental badges
Five metal badges mounted on green fabric board : 2/14 Queensland Mounted Infantry (QMI) hat and lapel ; 1/15 Royal New South Wales Lancers (RNSWL) hat badge ; 12/16 Hunter River Lancers (HRL) hat and lapel.light horse, new south wales, lancers -
Wangaratta High School
WTS Sports Award, 1966
Cricket award in the form of a rectangular block of wood with a small metal badge with engraved text nailed into the side. Presented to MURRAY HILL 5 wkts-20 runs Inc Hat Trick W.T.S. v B.H.S 24.3.66 -
Southern Sherbrooke Historical Society Inc.
Photograph - Glen Park Homestead, Percy and Cissy Johns on verandah, early 1900s
B&W photo shows siblings Percy and Cissie (Minnie Agnes) Johns on the verandah of their home, Glen Park Farm, Selby. Percy looks in his early teens, making the photo around 1910 or later. He is wearing a long-sleeved pale shirt, long dark trousers tucked into knee-high boots, and possibly a dark hat. Cissie is wearing a pale, knee-length dress, dark stockings, and a pale, wide-brimmed hat. She is aged about 10. A medium sized dark dog sits at Percy's feet. The house is an L-shaped weatherboard with two gables at right-angles and a verandah with a bullnosed roof, ornate support posts, and a striped end piece from the roof. Wooden steps lead down from side. There is a large brick chimney where the two wings meet, and a metal water tank to the side. There are large trees, both in leaf and dead, plus some flowers near the verandah. -
Royal District Nursing Service (now known as Bolton Clarke)
Photograph - Photograph, black and white, c.1956
This photograph is taken in the bedroom of the man's home in the suburbs of Melbourne. It depicts one of the types of nursing care given by Melbourne District Nursing Society (MDNS) Sisters in the community. The Sister is visiting the man's home and is administering an injection which has been ordered by a doctor. Glass syringes were used by the Society until the mid 1960s and were re sterilized for future use. After this time plastic disposable syringes were used.The Trained nurses of the Melbourne District Nursing Society (MDNS), later known as Royal District Nursing Service (RDNS), visited patients in their home and gave best practice care in many fields of nursing and to people of many cultures throughout its 130 years of expansion. Initial visits not only assessed the specific nursing situation but the situation as a whole. Their patients ranged in age from babes, children, adults to the elderly and referrals were taken from Hospitals, General Practitioners and allied Health facilities. Some of the care provided was: – Post-Natal care given to mother and babe, Wound Care following various types of surgery, accidents, burns, cancer, leg ulcers etc. Supervising and teaching Diabetic Care, including teaching and supervising people with Diabetes to administer their own Insulin, and administering Insulin to those unable to give their own injections. Administering other injections and setting up weekly medication boxes. The Sisters performed Catheterizations on adults suffering from conditions such as Quadriplegia, Paraplegia, Multiple Sclerosis (MS), Motor Neurone Disease (MND) and Guillan-Barre Syndrome, and when required at school on children for e.g. those with Spina Bifida. The Sisters visited those requiring Cystic Fibrosis support and care; those requiring Haemo-Oncology care, including visiting children at school; those requiring Home Enteral Feeding care, and those requiring IV therapy at home and home Dialysis. Palliative Care was given including pain relief with the use of syringe drivers, personal care as needed, and advice and support to both patient and family. RDNS provided Stoma management to those needing Urostomy, Ileostomy and Colostomy care and those requiring Continence care. HIV/AIDS nursing care was provided; visits to Homeless Persons were made. Personal care was given to patients ranging in age and with varying mobility problems, such as those with MS, MND, Guillan-Barre Syndrome, Quadriplegia, Paraplegia, Acquired Brain Injury, following a Cerebrovascular Accident (Stroke), those with severe Arthritis and those with a form of Dementia. When necessary the elderly were assisted with personal care and advice given on safety factors with the use of hand rails, bath or shower seats, and hand showers. Rehabilitation with an aim towards independence remained at the forefront of the Sister’s minds and when possible using aids and instruction on safe techniques enabled the person to become fully independent. All care included giving advice and support to the patient and their Carers. The Sisters liaised with the persons Doctor, Hospital and allied Health personal when necessary.On the left of this black and white photograph, is a Melbourne District Nursing Society Sister who is standing side-on and leaning slightly forward as she administers an injection into the right upper arm of a gentleman to her right who is sitting up in bed resting against two white covered pillows. The male patient has short dark hair; is wearing glasses, and is looking up at the Sister. He is wearing a thick grey cardigan over a pale colour pyjama top which has dark piping; the lower part of his body is covered by a dark and light coloured check bed cover. The bed has a solid wooden headrest with a bed lamp attached to its upper right. The Sister who is wearing her uniform grey brimmed hat over her dark short hair, is wearing a white gown over her grey uniform, the collar of which is seen. Three fingers of her left hand are holding back the pushed up sleeve of the man's cardigan and she is holding a white swab between her thumb and first finger. She has a glass syringe resting in her right hand with her thumb and forefinger resting against the lower glass and metal section of the syringe; part of the metal needle is seen, the rest is inserted in the mans upper arm. On the far left of the photograph part of a dressing table mirror can be seen.' Rough Proof' Latrobe Studios Ref No. 59134-8melbourne district nursing service, mdns, royal district nursing service, rdns, rdns - injection -
Ballarat Tramway Museum
Uniform - Cap, Commonwealth Government Clothing Factories Melbourne, mid 1960's?
Demonstrates uniform cap manufacture. Appears to be unworn.SEC Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior with a plastic band at the front half of the cap terminating in two small SEC metal buttons on either side, black plastic peak. Sewn on the inside is a label "Commonwealth Government Clothing Factories Melbourne" and stamped "7". tramways, trams, uniforms, cap, buttons -
Ballarat Tramway Museum
Uniform - Cap, Commonwealth Government Clothing Factories Melbourne, 1960's
Demonstrates uniform cap manufacture, badge and has a strong association with a former Ballarat Driver - Norm HuntSEC Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior with a plastic band at the front half of the cap terminating in two small SEC metal buttons on either side, black plastic peak fitted with cap or badge No. 20, nickel plated silver, in the centre of the cap above the hat band. Sewn on the inside is a label "Commonwealth Government Clothing Factories Melbourne (very faded)" and stamped "6 3/4". See also Reg. Item 3044 for an ex Geelong cap. Stored with the cap are a copy of the SEC By-Law 1, August 1965 and the Federal Rules of the ATMOEA - 1969 and three SEC tickets.tramways, trams, uniforms, cap badge, cap -
Ballarat Tramway Museum
Badge - MMTB Inspector, Stokes & Sons Melbourne, 1940's?
Stamped metal uniform badge for MMTB Inspectors. Tramways Board logo at top of badge in silver finish, the words "INSPECTOR" and the scroll outline in brass or gold colour. The area where the inspector's number has been painted on is in brass/gold finish. The number "103" has been painted on in royal blue colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "STOKES" stamped into. Two metal rings have been soldered onto the rear of the badge and a spring steel clip provided to enable the badge to be clipped to a hat. Assumed was Les Denmead's badge when employed by the MMTB.tramways, trams, mmtb, inspectors, badges, uniforms -
Ballarat Tramway Museum
Uniform - Cap, Commonwealth Government Clothing Factory Melbourne, 1950's
3044.1 SEC (Geelong) Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior. Black plastic peak fitted with cap or with four holes for the employee badge number in the centre of the cap above the hat band. Sewn on the inside is a label "Commonwealth Government Clothing Factory Melbourne" and stamped "7 3/8". The plastic band at the front half of the cap terminating in two small SEC metal buttons on either side is not present. The holes for this are not visible - may not have been present on Geelong caps? 3044.2 - two small SEC Button badge - nickel plated silver with "Stokes" "Vic" stamped on rear. See also Reg. Item 2894 for a Ballarat Cap. On inside of leather hat band in ink "Mr. R. Evans" and "90 Albert St. West Geelong".tramways, trams, uniforms, cap badge, cap -
Ballarat Tramway Museum
Uniform - Cap, Commonwealth Government Clothing Factories Melbourne, early 1960's?
Demonstrates uniform cap manufacture. Appears to be unworn.SEC Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior with a plastic band at the front half of the cap terminating in two small SEC metal buttons on either side, black plastic peak. Sewn on the inside is a label "Commonwealth Government Clothing Factories Melbourne" and stamped "6 1/2". On the right hand side of the inside of the brown band, stamped in gold is the Australian Coat of Arms and the words "A quality product / made in Australia / by the Dept. of Supply". Appears never to have been used.tramways, trams, ballarat, uniforms, cap -
Ballarat Tramway Museum
Uniform - Cap, Commonwealth Government Clothing Factories Melbourne, mid 1960's
Demonstrates uniform cap manufacture for a SEC Inspector, shows the "braid" worn by inspectors and has a strong association with Theo Dunstan.SEC Inspectors/Conductors cap - black cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band with gold trimmings, on exterior with a plastic band at the front half of the cap terminating in two small SEC gold coloured metal buttons on either side, black plastic peak. Fitted with and "Inspector" cap badge - brass, has been polished with Brasso remains on interior of letters. Received from donor as three individual items - reassembled. Assumed made by the Commonwealth Government Clothing Factories Melbourne, as identical style to that of a crew cap.tramways, trams, ballarat, uniforms, cap, inspectors -
Ballarat Tramway Museum
Uniform - Cap, Commonwealth Government Clothing Factories Melbourne, early 1960's
Demonstrates uniform cap manufacture for a SEC Inspector and has a strong association with Theo Dunstan.A well used - SEC Inspectors/Conductors cap - black cloth exterior, grey cotton interior lining, brown leather internal hat band, on exterior with a plastic band at the front half of the cap terminating in two small SEC gold coloured metal buttons on either side, black plastic peak. Missing the Inspectors trip or "braid" Sewn to the inside top of the cap, a white label with red printing "Commonwealth Government Clothing Factories Melbourne" and stamped "6 5/8".tramways, trams, ballarat, uniforms, cap, inspectors -
Ballarat Tramway Museum
Uniform - Cap, Commonwealth Government Clothing Factories Melbourne, 1960's
Demonstrates uniform cap manufacture, badge and has a strong association with a former Ballarat Driver - Jock Menzies.SEC Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior with a plastic band at the front half of the cap terminating in two small SEC metal buttons on either side, black plastic peak fitted with cap or badge No. 60, nickel plated silver, in the centre of the cap above the hat band. Sewn on the inside is a label "Commonwealth Government Clothing Factories Melbourne" and stamped "6 3/8". See also Reg. Item 3044 for an ex Geelong cap.tramways, trams, uniforms, cap badge, cap -
Bendigo Historical Society Inc.
Photograph - HILDA HILL COLLECTION: BLACK AND WHITE PHOTOS, 1922
Series of Black & White Photos Total 5 of the Hill Family & Friends during leisure in 1922. Mollie dressed on black with white blouse astride a horse & Hilda wearing a tartan skirt with a white blouse, at the Durvol Property Kyneton Victoria Australia September 1922. Four young ladies all wearing a dark colour dress with white blouse, two are wearing dark hats and two white, sitting on a metal ended wooden slat seat, Castlemaine 1922.Nora Nellie Jonah sitting on a rocky outcrop, two wearing dark clothing with white blouses on in lighter colour wearing hat with white bands on crown. At Inglewood November 8th 1922, Six males al dressed in dark suits with white shirts and dark ties, also six ladies one in coloured dress others all in white one wearing a tartan like pattern skirt, one lady has dark hat another light coloured. Enjoying the Reservoir Inglewood 1922.Hilda Hill Perrsonal Collectionaustralia, history, post war life -
Scotch College Archives
Badge & hatband
The badge belonged to John Arnold Seitz who attended Scotch from 1914 until ?. The badge and hat band would have been attached to a staw boater worn by students to the Head of the River Boat Races. Oval shaped badge of gold coloured metal and enamel with crossed oars coming up from the a banner at the bottom of the badge. The oval is formed by a buckled belt of dark blue within this on dark red background is a seated scholar. A pin is on the back to Inscription on badge "DEO PATRIAE LITTERIS/ HEAD OF RIVER RACES". Verso STOKES & SONS MELB 811/?? (numbers are difficult to decipher)clothing, gold, 1914, badge, accesory, headware, scotchcollege, seitz john arnold, maroon, blue boat races, head of the river, crossed oars, hatband -
Ballarat Tramway Museum
Uniform - SEC uniform Hat, Commonwealth Government Clothing Factories Melbourne, 1960s
All tramway platform crew were issued with a cap and were expected to wear it at all times. Demonstrates uniform cap manufacture.SEC Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior with a plastic band at the front half of the cap terminating in two small SEC metal buttons on either side, black plastic beak. Sewn on the inside is a label "Commonwealth Government Clothing Factories Melbourne" and stamped "6 3/8".btm, ballarat tramway museum, conductors, conductors hat, uniforms, sec, conductors cap, motormen, drivers -
Bendigo Historical Society Inc.
Headwear - Brass Band Cap Plume
Eaglehawk Brass band was established in 1884. At Christmas 1885 the band appeared in their new uniforms of which this hat plume was a part. The uniform was made by Mr William Cameron, tailor. These were the first uniforms to be made locally in this district. The band wore them again at the Myers Flat Boxing Day Sports event.Borough Brass Band 1896. Red horse hair plume 20cm long attached to a four pronged metal holder with screw attachment. A photo of a band member holding a trombone. Written beneath the photo, "Borough Brass band 1896." Has a tag attached. On tag there is a name on the back H.J. G. Biggs Health Inspector.brass bands bendigo, cap plume, horse hair, brass band photo -
Tennis Australia
Racquet, Circa 1961
A Spalding, "Ashley Cooper" Anzac Model tennis racquet, featuring whipping around shoulders and shaft, leather perforated handle grip, and embroidered white butt cloth. Manufacturer's name across base of head; model name across throat. Graphic of kangaroo wearing a hat on throat. Wreathed 'S' trademark features on lower shaft and embroidered on butt cloth. Signed by Ashley Cooper on shaft (both sides). Leather butt wrap. Butt cloth stained with black ink writing, now illegible. Materials: Wood, Metal, Lacquer, Glue, Ink, Nylon, Paint, Adhesive tape, Leather, Cloth, Threadtennis -
Tennis Australia
Oil painting, Circa 1790
Painting: 'John Donnelly at 9 years old, Blackwater Town'. Inscribed on top panel of stretcher: 'JOHN DONNELLY AT 9 YEARS / OLD / BLACKWATER TOWN'. A full length portrait of a male child in dress coat, vest, breeches and buckled shoes holding a shuttlecock and early racquet (probably a battledore). Next to figure is a hat placed on a chair. Oil painting on canvas, stretched on wood frame, and fitted with a velvet mount and bevelled wood hanging frame. Scratched into stretcher: 'ETL79'. Adhesive stickers on stretcher state:'2#' and '407'. Materials: Wood, Metal, Oil paint/Pigment, Canvas/Cotton, Adhesive label, Velvettennis -
Tennis Australia
Print, 1885, Circa 1990
Reproduction of 1885 painting depicting a tennis match between a male player and a female wearing a white dress and straw hat with pink flower.. Both players using flat top racquets. Two spectators, one with parasol, at right. Artist signature reproduced lower right may read 'J.LARRY'. Materials: Paper, Ink, Glass, Cardboard, Glue, Wood, Metal, Adhesive labeltennis -
Tennis Australia
Print, Circa 1920
A colour print, from an original tinted black and white photograph, of a woman in a green overcoat, white dress and hat, holding a tennis racquet. Materials: Paper, Ink, Cardboard, Glass, Metaltennis -
Tennis Australia
Black and white photographic print, Circa 1885
Photograph of unknown woman standing in a garden wearing a straw boater hat, white blouse and skirt and cropped jacket, and holding a flat top racquet. This outfit is also an accessioned object in the collection: hat (2009.730) and clothing (2009.748). Materials: Paper, Photographic emulsion, Metal, Plastic, Glasstennis -
Tennis Australia
Hat pin, Circa 1900
... tennis racquets in silver at one end. Materials: Silver/Metal Hat ...A silver hat pin featuring two tennis racquets in silver at one end. Materials: Silver/Metaltennis -
Tennis Australia
Hat pin, Circa 1900
... /Metal Hat pin ...A silver hat pin featuring a tennis racquet and ball in silver at one end. Materials: Silver/Metaltennis