Golf trophy awarded by the Thomastown Golf Club. Bob Jones was a foundation member of the Club and Secretary for many years.Thomastown Golf Club was a social club formed in 1976. This is part of the Robert (Bob) Jones collection of Club memorabilia.Golf trophy, plastic and timber. "Thomastown Golf Club. B Grade winner, R. Jones, Bacchus Marsh, 05/12/1982." engraved on plaque.thomastown golf club, golf trophies, bob jones, robert jones

This book was owned by the late Dr Elizabeth Kerr and was donated to the Museum by the executor of her estate, Margaret Cameron. It was produced by Patons and Baldwins and contains knitting patterns for baby clothes.Patons / KNITTING BOOK / no. R.2 / "HEATHER" / See page 16 / Your Favourite Reprints / 10 1/2d.knitting handicrafts - history, patons and baldwins (australia) ltd, knitting, handicrafts - history

This book was owned by the late Dr Elizabeth Kerr and was donated to the Museum by the executor of her estate, Margaret Cameron. It was produced by Patons and Baldwins and contains knitting patterns for mens garments.Patons / KNITTING BOOK / NO. R.3 / P&B / WOOLS / "HUGH," See page 2 / Revised / Edition / 1'9d.knitting handicrafts - history, patons and baldwins (australia) ltd, knitting, handicrafts - history

Typewritten letter and envelope relating to the deferment of Mr. Newell's National Service training. Letter dated 27th July 1957Text, letter: " COMMONWEALTH OF AUSTRALIA / DEPARTMENT OF LABOUR AND NATIONAL SERVICE / Mr. John R. Newell / LINTON POST OFFICE. "john newell, department of labour and national service, national service training

The early settlers of Victoria depended on horse drawn vehicles to farm, make roads and railways, deliver produce and transport people. Horse harnesses were an important requisite for all drivers and could be found wherever there were working horses. Horse Harnesses have played an essential role in different cultures throughout history. Simple, utilitarian horse harnesses made of leather straps and iron rings were being used in early China before AD 500 as well as ancient Greece and Rome, allowing horses to pull chariots and ploughs. The Greeks and Romans were the first to use a "horse collar" which distributed the weight of the harness evenly across the horse's chest rather than relying on a "throat harness" that could damage a horse's throat or choke them. During the medieval period, European horse harnesses became more elaborate and decorative. Variations of different horse harnesses were also found in Native American and Middle Eastern cultures. Horse Harnesses usually have four basic components which include - 1. Communication - the bridle, bit and reins allows the driver to communicate instructions and commands to the horse, guiding its movement and direction. 2. Draft - the collar, hame straps, hames, traces and chains enables the horse to draw and pull the load efficiently by distributing the weight and transferring the pulling force to the vehicle. 3. Stopping - the breeching band, pole straps and breast strap helps to control or stabilise the horse and vehicle when moving downhill or stopping. 4. Support - the back pad, backband, belly band and back saddle keep the harness in the correct position and proper alignment. This show harness was used by Mr. Andy Bourke when showing his Clydesdales at shows or demonstrations. Although a more modern example with decorative embellishments, it still has many essential components traditionally found in an everyday working horse harness. The original purpose of the "housen" for example, was to run rain or drizzle off the horse's neck when they had to work in wet conditions - it was laid flat for this purpose on the top of the collar. Nowadays it is purely for show and is often used to advertise a business or stud. Horse brasses and fly terrets were fastened to various parts of a horse's harness. In the early days they probably began as amulets to ward off evil and to bring good luck and continued to be used as a festive decoration. The heyday of horse brasses was between the years 1851 and 1900. Horse brasses are fastened to various parts of the harness with many of their designs being symbolic. The ornamentation on this harness (although not authentic horse brasses) are based on the horse brasses that were popular in the 19th century. This horse harness is a significant example of the equipment that was needed wherever heavy horses were being used - particularly in the early years of Victoria's settlement by white settlers. Harnesses such as this example were used with stage coaches, drays, farming equipment, delivery carts and personal transportation.A leather and metal horse harness used when showing a Clydesdale (or other breed of heavy horse). It is made up of a number of components. 1. Decorative leather cart saddle with two large cloth pads underneath (which have a scalloped leather and stud border), a raised leather pommel and a silver and red coloured metal back strap holder across the top. It has two symmetrical sets of ornamentation (silver hearts and circles) in the front and a wide strap or girth (with a maker's stamp reading "R. Mitchell Saddler") and buckle which attaches the saddle to the horse. 2. Pair of steel hames which are gently curved (to fit on a horse collar) and are topped with steel knobs. They have several steel rings and lugs (to hold straps and chains) and a "Made in England Warranted Steel" stamp. 3. Breeching harness which consists of a number of leather straps, chains and metal rings including a wide padded leather strap with a scalloped edge that sits on the back of the horse and a thick leather strap that goes around the hind quarters of a horse which is joined to the back strap with four shorter vertical straps and buckles. These straps feature silver and red patent leather trim and silver heart shaped ornamentation. The strap also features the maker's stamp of "R. Mitchell". 4. Decorative leather bridle with blinkers featuring the same silver and red patent leather trim on the cheek piece, brow band and throatlatch. It has a stainless steel "Liverpool Driving Bit" with a curb chain, a variety of decorative silver ornaments (rosettes, diamonds plus a heart and two circles) on each end of the forehead band, dropper and strap as well as a silver metal bell (sometimes known as a "fly terret" or "swinger") that sits on the headpiece of the bridle. 5. Leather "violin shaped" dropper (or hanger) with two silver rosette shaped ornaments and a stainless steel clip on the top 6. Stainless steel "Liverpool Driving Bit" with a straight mouthpiece which is ribbed on one side. It has three rein spots (spaces) and a curb chain. 7. Leather arch shaped "Housen" covered in black and red patent leather and decorated with silver studs (some spelling out F H) and bordered with a red fringe. It has a leather strap at the back and two leather loops on the front. 8. Leather padded backband (Australian style "Stallion Draught Roller") decorated with two groups of nine metal "horse brasses" or harness ornaments displaying horseshoe, starburst and horse head designs on blue, red and white striped webbing. The backband has three notched straps at each end, a buckle near the centre and the initial B stamped in two places underneath. 9. Bellyband made of leather and red, white and blue striped webbing. It has a set of three buckles at each end (which correspond with the notched straps of the backband). 10. Wide, thick leather strap which has a buckle and notches at each end. It also has the maker's stamp of "R. Mitchell Saddler". 11.One pair of long leather traces - each with a buckle and notched loop at one end, decorated with a small silver diamond shaped harness ornament. 12. Length of stainless steel heavy duty chain with two swivel connectors.Saddle - "R.MITCHELL / SADDLER" Hames - "MADE IN ENGLAND / WARRANTED / STEEL" "MADE IN ENGLAND / WARRANTED / unclear" Breeching Straps - "R. MITCHELL / MAKER / R. MITCHELL MAKER" Housen - "F H" Backband "B / B' Wide leather strap - "R. MITCHELL / SADDLER"flagstaff hill maritime museum and village, warrnambool, great ocean road, shipwreck coast, harness, horse harness, show harness, clydesdale horses, andy bourke, horse drawn cart, housen, bridle, hames, breeching straps, dropper, bit, liverpool bit, backband, harness ornamentation, bellyband, back saddle, fly terret

Denis Gibbons (1937 – 2011) Trained with the Australian Army, before travelling to Vietnam in January 1966, Denis stayed with the 1st Australian Task Force in Nui Dat working as a photographer. For almost five years Gibbons toured with nine Australian infantry battalions, posting compelling war images from within many combat zones before being flown out in late November 1970 after sustaining injuries. The images held within the National Vietnam Veterans Museum make up the Gibbons Collection. A black and white photograph of diggers from 1st Australian Task Force, Nui Dat, Phuoc Tuy Province, are briefed by the Provost Marshall on what is expected of them whilst on R & C leave in Vung Tau. The Military Police set the scene by giving the diggers their first beer freephotograph, 1 atf, nui dat, vung tau, military police, gibbons collection catalogue, r & c leave, phuoc tuy province, diggers, denis gibbons

Lieut Col R Gartside VD was killed in action at the Dardanelles,on Saturday 8th May 1915. This portrait was presented to the Harcourt State School byShire President, Mr E Pritchard After a lengthy career in the militia, Colonel Gartside served with distinction in the South African War, becoming known as the ‘Hero of Elands River’. He saw active service in WW2 and was killed leading a charge at Cape Hellas during the Gallipoli campaign. Sepia photograph, a portrait of a soldier in World War I uniform, wearing cap and medals

Letter headed "Tramway Board", office copy, dated 29/3/1917 - to Mr. W. R. Pollock, of Newcastle, offering a starting salary of six pounds per week.Demonstrates an employment letter.Carbon copy of a letter on blue quarto paper.Has "H. S. McComb" in pencil in the top left hand corner.trams, tramways, tramway board, cable trams, engineers, personnel

Reference book. Fawn card cover Sketches of various scenes in brown. the title also in brown. Sketches by John Glover (Local Artist).R A Blachfordstawell

The J. R. Watkins Co. opened its first overseas branch in Australia in 1935. The J. R. Watkins built a large factory at Highett on a six acres on the east side of Nepean Highway (no. 1123) in 1954. The J. R. Watkins company was founded in 1868 in Plainview, Minnesota USA, moving to Winona in 1885, by J. R. Watkins.Example of industry in the City of Moorabbin.Amber glass bottle with a metal screw on lid. A paper label is on the front of the bottle 'Watkins Polish" printed in yellow, black and white.PRINTED ON LABEL: 11 Fluid ounces - WATKINS POLISH - Gives a hard dry lustre excellent for Dusting For cleaning, dusting and polishing furniture, pianos, woodwork, linoleum, hardwood floors and all polished surfaces. Directions: If the article to be polished is dirty or gummy, clean it by washing with mild soap and warm water. Apply Watkins Polish with a damp, soft cloth (Dampened with water and wrung almost dry). The Polish may be poured on the damp cloth or on the surface to be polished. In either case rub it all with a dry cloth to obtain a high polish. When dusting, dampen the cloth with Watkins Polish - it keeps down the dust and gives a lustre which is neither greasy not gummy. The J. R. Watkins Co. Melbourne - Sydney - Adelaide - Kogarah EMBOSED ON BOTTLE: "The J.R.Watkins co. Made in Australia" the j. r. watkins co, highett, polish

A mustard plastic folder with four steel rings holding many white pages printed on one side only. Written by J. R. Anderson, Education Officer for the Soil Conservation Authority. Published Nov. 1979 The folder also includes 17 colored slides held at the front by a clear plastic pocket.soil conservation authority, upper kiewa valley, j. r. anderson, education for seniors

A. Dart Memorial Trophy (Stawell Gun Club) L to R Col Dooley St.Arnaud. Phil Scott Stawell. Cec Blackley Horsham. Mrs Maysie Dart presenting trophy in memory of her late Husband.stawell sport

List - 11 quarto ruled sheets, hand written, titled "R Series of Drawings - buses", listing in an alphabetical order of bus drawings, dates, sizes and title. Also has a listing by bus type. See also Reg Item List includes drawings up to 1971. Sheets numbered 201 to 211trams, tramways, drawings, preston workshops, buses

Lasercopy of engraving by R. Jenny 'Sandridge' - view from the bay, late 1800snatural environment, transport - shipping, r jenny - artist

Light blue card with blue print and handwriting. The warrant has both the Methodist Girls' Comradeship and Rays emblems on it."Mrs R Grose" "Chief Ray" "Shepparton Junior" "John W Goodluck" "30-3-63 21-9-63 CMR"methodist girls' comradeship rays' section, mrs r grose, john w goodluck chief director, methodist girls' comradeship shepparton junior rays

Stawell Historical Society Inc. Original Members. L To R Mrs Dawn Miller. Mrs H Croft. Mr Geoff Sudholz. Mr Allan Miller. Mrs Jean Hughes and Mr John Muller. 1981stawell

Reports - letter and documentation associated with the "Operation of Sydney R Class Tram No. 1808 - 12 October 2003" dated 6 Oct. 2003 signed by Kym Smith as Manager Bendigo Tramways. Comprises 22 A4 stapled pages, written as a Material Change document for safety purposes. Gives timetable and arrangements for proposed tour.trams, tramways, bendigo tramways, yarra trams, rail safety, special tours, sydney

A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. All we known about R Knight is that he was a tool maker and retailer that operated a business in England early to mid 18th century. There are many of his tools including decorative moulding planes of all sizes and designs for sale around the world and that his tools in particular moulding planes are well sought after by collectors of vintage tools.A vintage tool made by a known maker, this item was made commercially for firms and individuals that worked in wood and needed a tool that could produce a ornamental finish to timber. The tool was used before routers and spindle moulders came into use after World War ll, a time when to produce a decorative moulding for a piece of furniture, door trims etc or other items had to be accomplished using hand tools and in particular one of these types of planes. These profiled planes came in various shapes and sizes to achieve a decorative finish. A significant tool from the early to mid 18th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Tools that were themselves hand made shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to produce a decorative finish that was needed to be made for any timber item.Complex Moulding Plane Maker R Knight, Stamped T Whlele (owner) & No 5 opposite endflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, moulding plane, plane, j heath, ames

Black and white print of a W class tram body on dollies at the Holden Body Builders at Woodville Adelaide. Mr R E Jackman was the MMTB's Superintendent (Engineer) representing the Board in Adelaide for both the Holden contract and the contract with Perry Engineering for bogies or trucks for the W-class tram. Shows the tram basically complete on temporary dollies. See item 5554 for other digital images of the work.Yields information about the construction of new tramcars for the MMTB by HoldensBlack and white print with details on the rear.In red ink "Holdens Motor Body Builders", in black ink "14/3/24", in pencil "roof shows only partly painted" and the stamp of "R E Jackman"tramways, tramcars, w class, holden bodyworks, new tramcars, adelaide, construction

St Mary’s Ball 30th August, 1954. Crs Robert Horman, R Spencer and HE Parker. All material is from Gwen Horman’s three albums that she owned. Some photos have been taken by Peter Payens of Ringwood Studios, 36 Whitehorse Road, Ringwood, WU-7609, probably for the Ringwood mail newspaper.

Set of hand written notes recording date of sale of MMTB trams - R, U, S, P, W, G, H, J, and Q class and sometimes the sold location. Notebook - pocket size, wire spiral bound, listing trams sold by the MMTB up to the mid 1970's and similar for Ballarat and Geelong cars.trams, tramways, sale of trams, mmtb, notebooks, personal papers

These drawings have been produced by Ron Uebergang at the Warrnambool Technical School in 1919. Uebergang family members were pioneer settlers in the Warrnambool area in the early 1850s. Ronald John Uebergang (1903-1971) was born in Warrnambool to Ernest Uebergang and Mary Watson. Ron Uebergang lived at the family property, Hopkins Hill at Allansford and went to Allansford State School and Warrnambool Technical School. He was mechanically minded, a good photographer and fond of music and dancing. He married Myra Hall and was a dairy farmer at Hopkins Hill and later grazed beef cattle. Warrnambool Technical School was established in 1913, firstly at a Timor Street site and later at Caramut Road (today it is known as Brauer College). These drawing are of considerable interest as works produced by Ron Uebergang. Uebergang family members have been prominent in the Warrnambool-Allansford area since the pioneering days of the district. The drawings also are good examples of the type of work produced by Warrnambool Technical School students in its early years.These are two designs and drawings by Ron Uebergang produced at the Warrnambool Technical School in 1919. They are drawn on white card using black and red ink. The scale of the Flywheel is three inches to one foot and the Bevel Wheels are one-third full size. The drawings are edged with heavy black lines. The two sheets have the signature of Ron Uebergang. There are also four pages of handwritten notes on the Flywheel and Bevel Wheels.‘Designed by R. Uebergang’ ‘Drawn by R.Uebergang’ ‘Date 4/1/19’ (on Flywheel sheet) ‘Date 27/5/19’ (on Bevel Wheels sheet) warrnambool technical school, ronald uebergang, history of allansford

Previous owners: T. H. Smith, T. W. SmithNo. of volumes: 124 Volume range: 1865-2014 (2008-2014 included within Chancery parts) Probate & divorce: Vol. 1 (1865) - Vol. 3 (1875) Probate: Vol. 1 (1875) - Vol. 15 (1890), Vol. 1891-1971 Family: Vol. 1972-2007 Editors: Bulwer, J. R. (1865-1885) Stone, A. P. (1886-1894) Pollock, F. (1895-1936) Topham, A. F. (1936-1939) Williams, R. E. L. V. (1940) Sutton, R. (1941-1952) Colinvaux, R. P. (1953-1968) Lamb, J. F. (1969) Ellis, C. J. (1970-1995) Williams, R. (1996-2007)law reports: digests: etc -- great britain, probate law and practice -- great britain -- cases, divorce -- great britain -- cases, admiralty -- great britain -- cases

John Heath tool boxPlane Moulding type maker R Knight. Stamped T Wheeley & J Heath flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, plane moulding, t wheeley & j heath, r knight

This locker door was used by the Carlton Premiership player of 1968, 1970 and 1972, Robert Walls. Walls played 218 games for Carlton between 1967 and '78. The locker carries his name because he wore the No.42 into 100 senior games for the club - the minimum number of games required by a player to earn that honour. This item is one of the few of its type remaining with the club, and Robert Walls is an important figure in Carlton FC history as both Carlton Premiership player (1968, 1970 and 1972) and Senior Coach (1987). The locker room is considered the inner sanctum of the players, hence the significance.1.5m x 25m x 2.5cm steel louvred dark navy blue locker with white enamel No.42 and R. Walls, silver handle. At rear on left side below louvre, white powder coated, with inscription GOOD BOY BANGER! in fading black fineliner, and GOOD BOY POTS AND PANS!, plus various other markings. Slight rust. At rear on left side below louvre, white powder coated, with inscription GOOD BOY BANGER! in fading black fineliner, and GOOD BOY POTS AND PANS!, plus various other markings. locker, no.42, robert walls, carlton football club, robert heatley stand, locker room

Two service medals awarded to Lt Allan Robert Stewart VX114312 of 124 Aust. Special Hospital Unit. He was born on 29/5/1906 at Hamilton and enlisted at Ballarat. Military service records not available/examined.Two metal medals with ribbon above black engraved plaque mounted on timber framed red felt Plaque: VX 114312 Lt Allan R Stewart 124 Aust. Special Hospital Enlisted 23rd October 1942 Discharged 15th May 1946allan robert stewart, ww2, service medals, 124 aust. special hospital unit

This item is part of the Federation University Art Collection. The Art Collection features over 2000 works and was listed as a 'Ballarat Treasure' in 2007. If you can assist with information on this artist or artwork please use the comment link below.Signed "Cal R."art, artwork, horsham, horsham campus art collection

Glass bottleR. Harper & Co.bottles