Chris Bailey’s father loaned this bell to Newcomb High School for the first two years until a PA system was installed. It came from his father’s boat in the Middle East. Chris was a Form 1 student in 1969. The bell is now kept at Chris’ home, 4 Yvonne Street, Belmont, 3216. Metal Bell

Copy of a document from an original source, typed, outlining the use and methods of checking weekly tickets on the Bendigo tramway system. Dated 21/4/1927. Included is a typed copy of Public Notice providing fares and the number of daily trips on the Golden Square and Lake Weeroona line, dated Feb. 1927.Yields information about the use of Weekly tickets on the Bendigo tramways in 1927.Single sheet of blue foolscap paper, typed - copy of report regarding the use of Weekly tickets on Bendigo Tramways 1927.trams, tramcars, weekly tickets, tickets, bendigo

Reproduction of the front page of The Courier, 24/11/1955 about the State Government defeat of a motion in the Legislative Assembly of a motion to rescind a SEC Notice to close the Geelong tram system. The State Opposition leader, Mr John Cain (Senior) warned that the SEC intended to abolish trams in both Ballarat and Bendigo.Yields information about the SECV notice to closure the Geelong system in 1955.Copy of a celebratory part of The Courier Ballarat - A3 sheet featuring big events that the paper covered, such as the Declaration of the 2nd World War.trams, tramways, geelong, closure, parliament, john cain, secv

Used by The Metropolitan Transport Authority (The Met) to provide a system of weekly tickets across all Melbourne travel zones, used in the early 1980s. These could be used on all transport forms - trains, trams, and buses. Would be date stamped on the left hand side to show validity. Conditions of use printed on rear. Show one of many types of Travelcards used in Melbourne when the metropolitan ticketing system was brought under one body - The Met.Set of three light card printed tickets - Ticket - Travel Card - Weekly Zone1 Nos. 287144 and 145 Zones 1 and 2 - Nos. - 878511 and 512 Zones 1, 2 and 3 - Nos. - 769646 and 647public transport, tickets, travel cards, the met, zones, weekly tickets, travelcard

This wooden board, which was used to make the system portable, served as a firm base needed to sustain puncture pressure when transcribing. The metal hinge held paper on the board, and a row of holes either side of the board held a frame in place, thereby ensuring that the lines of Braille were straight across the page.1 wooden back board with metal hingeRVIB logo and name attached to board, partially hidden by hingebraille equipment, royal victorian institute for the blind

Standard issue item as used by Australian servicemen during the conflict in Vietnam. A plotting board is a mechanical device used as part of a firing control system to track the observed course of a target, project its future position, and derive the azimuth (or direction) and range needed to direct the fire of the guns of a battery to hit that target.White plastic base. A circle marked with grid lines is printed on the base and a vernier for finding azimuth deflections in along top edge. Rotating disc pivots at the centre atop the disc with distances measured radially form 0 at the centre to 3400 metres around the rim range form 0-6400 metres. A scale pivoted at the centre assists in reading distances.Nth and Sth top and bottom on rotating disc. East and West in centre distances in black on outer of disc. Distances in green on inner North, South, East, West. Varn W left bottom of disc. varn E on right bottom of disc.plotting board, m16

Memo dated 31/7/1956, to Acting Engineer and Manager from the SECV Secretary with a copy to Manager Ballarat Branch regarding possible compensation payments to the Councils if the Ballarat and Bendigo tramway systems were to close, based on losses, rates, and what was paid in Geelong. Notes the provision of bus stop shelters.Yields information about possible compensation to Councils in the event of a closure of the tramways.Memo - foolscap sheet - carbon copy with a date stamp and acknowledgement notes.Has a hand written notes - see image.secv, closure, bendigo, geelong, ballarat

Legacy hold an Anzac Commemoration Service for Students every year. For many years it was simultaneously broadcast on the ABC radio stations around the State for students that could not attend. This tape has not been played but presumably from the date it is a recording of the broadcast of the 1957 service.A record that the Anzac service for students was of significant importance that it was broadcast on the ABC.An audio recording on a clear plastic spool of an Annual Anzac Commemoration Service for Students in 1958 in a cardboard box with the Mastertape logo. Top of box. Mastertape, M.S.S. Recording company Ltd., in red print The master sound system in blue print. Poyle Farm, colnbrook, Bucks, England in blue print. Type PM15 Bottom Box, handwritten, black ink Anzac OBS COMTE. In blue ink, A.B.C. Broadcast April 24th 1957. In pencil, Simpson and the donkey. Spool M.S.S. side no1 no2. Tape, magneticanzac commemoration for students, wreath laying ceremony

This is a set of 16 photograph of the Royal Australian Survey Corps’ Johnson Ground Elevation Meter (JGEM) Survey Vehicle taken at the Army Survey Regiment, Fortuna, Bendigo. The JGEM vehicle was extensively used by RA Svy within Australia from the late 1960s. A limited number of Ground Elevation Meter (GEM) station wagon type vehicles were manufactured by General Motors Corporation (GMC) in the USA for the United States Geological Survey, Canada’s mapping agencies, RA Svy and National Mapping (Natmap). The GEM was a four-wheel drive, four-wheel steer vehicle. Four-wheel steering was necessary to avoid systematic errors caused by non-tracking of front and rear wheels on conventionally steered vehicles. The manufacturer substituted the rear axle with a front axle and connected them to form the four-wheel steering mechanism. The two Australian GEM vehicles, referred to as Johnson GEMs (JGEMs) were converted into right-hand drive. After delivery in 1964, acceptance Natmap and RA Svy testing and operator training was undertaken at the Army's School of Military Survey located at Balcombe, Victoria. A small fifth wheel was mounted on a cantilever arm suspension midway between the front and rear wheels on the right side of the vehicle. It was lowered to and raised from its operating position by use of a constant pressure air cylinder. A telescopic bar, suspended between the front and rear axles, provided the reference datum for the angle measurement. The wheel provided the velocity or distance signal through a pulse generator system. A sensitive pendulum mounted on this bar provided the angle measurement for each minute distance traversed. The JGEM contained electromechanical instruments used to determine relative elevations, by trigonometric principles, along a traversed path. These relative elevations were obtained through apparatus which measures the instantaneous angle of inclination of the road and the instantaneous velocity of the meter along such a path. Road routes over which the JGEM operated were planned so that each started and ended as near as practicable to an existing point of known elevation (formally referred to as a level traverse bench mark). The difference in height from the bench mark and the road surface alongside the JGEM’s fifth wheel was measured with a level and staff. Along each route, mapping control photo reference points where new elevation values were required were identified on aerial photographs. Under favourable conditions it was possible to survey as much as 160km in an ordinary working day. The first of RA Svy’s JGEM operations was undertaken in 1:250,000 scale map areas of Queensland. CPL John Hook was the JGEM’s main operator in the early 1970s undertaking operations covering 1:250,000 scale map blocks over northern Victoria and central NSW, each requiring 36 points (9 runs of photography and 4 points across. SPR Lyn Thompson and SPR Bob McDonagh teamed with CPL Hook on some of these JGEM operations. When RA Svy was integrated into the Royal Australian Engineers in 1996, the JGEM vehicle with the Survey Corps collection was donated to its museum. It is believed to be the last of the original manufactured fleet in existence. The JGEM has undergone extensive refurbishment to achieve roadworthiness and is currently housed at The Australian Army Museum of Military Engineering, Hoslworthy Barracks, NSW. It can be viewed by making an appointment with the museum’s curator.This is a set of 16 photograph of the Royal Australian Survey Corps’ Johnson Ground Elevation Meter (JGEM) Survey Vehicle taken at the Army Survey Regiment, Fortuna, Bendigo. The photographs were on 35mm slide film and were scanned at 96 dpi. They are part of the Army Survey Regiment’s Collection. .1) - Photo, colour, c1960s, Johnson Ground Elevation Meter (JGEM) Survey Vehicle .2) - Photo, colour, c1960s, JGEM instrumentation, on-board computer. .3) - Photo, colour, c1960s, JGEM instrumentation. .4) - Photo, colour, c1960s, JGEM instrumentation, on-board computer. .5) - Photo, colour, c1960s, JGEM tyre pressure controller .6) - Photo, colour, c1960s, JGEM rear doors, SGT Geoff Briggs. .7) - Photo, colour, c1960s, JGEM 5th wheel distance/angle measurement device in lowered position, SGT Geoff Briggs. .8) - Photo, colour, c1960s, JGEM 5th wheel distance/angle measurement device in lowered position. .9) & .10) - Photo, colour, c1960s, JGEM tyre pressure system, SGT Geoff Briggs. .11) - Photo, colour, c1960s, JGEM tyre pressure system. SGT Geoff Briggs. .12) - Photo, colour, c1960s, JGEM levelling scope, levelling staff, unidentified technicians. .13) & .14) - Photo, colour, c1960s, JGEM levelling scope, unidentified technician. .15) & .16) - Photo, colour, c1960s, probably survey operation adjusted height plotted on block base sheet. .1P to .16P - Some of the equipment is annotated on the frame of the 35mm slides.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, surveying

This is a photograph of Air Survey Squadron, one of the Army Survey Regiment’s four squadrons, taken at Fortuna, Bendigo, c1988. Air Survey Squadron’s main functions were aerotriangulation and digital photogrammetric extraction of 3D topographic features from aerial photography, using Wild B8s coupled to the AUTOMAP 2 computer system.This is a photograph of Air Survey Squadron at the Army Survey Regiment, Fortuna, Bendigo, c1988. The photograph was printed on photographic paper and is part of the Army Survey Regiment’s Collection. The photograph was scanned at 300 dpi. .1) - Photo, black & white, c1988: Back Row L to R: SPR Mark Linwood, SPR Trevor Roddam, SPR Noel Brinsmead, CPL Mark Lander, CPL Frank Downie, SPR Sandy Craig 3th Row L to R: SPR Steve Rundle, unidentified, Darren Wilkinson, CPL Dave Longbottom, SPR Max Watson, unidentified, SGT Paul Hopes, unidentified. 2nd Row L to R: SGT John ‘Shep’ Shepherd, SPR Paul Boulton, SPR Stuart Bowd, SPR Paula (Golding) Brinsmead, SPR Jo Otto, CPL Steve Coulson, SPR Steve Linane, CPL Chris ‘Charlie’ Brown. Front Row L to R: SSGT Bruce ‘Hap’ Hammond, WO2 Barry Lutwyche, LT Struan Robinson, SSM WO1 Alan Hancox, OC MAJ Peter Clark, LT Simon Buckpitt, WO2 Neil ‘Ned’ Kelly, SSGT Noel ‘Macca’ McNamara.No personnel are identifiedroyal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr, air survey

No. 40 prior to departure from Lydiard St North - Greg Triplett. The destination showing depot is incorrect - the tram ran through to Sebastopol. Two conductors are standing in the front of the tram, with many photos being taken at the time. Taken on the last day of operation of the SEC Ballarat tramway system - 19-9-1971. Yields information about the last day of operation of the Ballarat SEC tramways.Digital image - 120 negative tramways, tramcars, ballarat, last day, closure, lydiard st nth, tram 40

From a Melbourne Cable Car Trailer, built by the Melbourne Tramway and Omnibus Co. circa 1885. It is cast in 2 halves and then the 2 pieces forged together. It is a poor example due to a poor sand system employed. Lack of wear markings suggests this item had not been extensively used or subject to extensive wear.Example of cable car suspension componentsCast item, two halves welded together and painted.ballarat, ballarat tramways, cable car, horse tram

Annual report providing overview of activities and achievements including: profiles of various people who are clients, lobbying for an aids and equipment program for Seniors, adoption of an accessible voting system in Western Australia, becoming an authorised Apple reseller and the introduction of the three link logo to indicate the connection between clients, staff and other organisations.1 volume with illustrations providing overview of organisational achievementsvision australia, corporation records, andrew moffat, ron hooton, connor mcleod

It has been suggested that it is possibly part of the clockwork mechanism of the third order Fresnel lens, which was a component of the Chance Brothers lens system introduced to the lighthouse when the optics were upgraded in 1913, and subsequently removed in 1975. Further research may confirm its association with the lens and increase its heritage importance. The well-made brass fitting has second level significance as a possible former component of the clockwork mechanism manufactured by Chance Brothers in c.1912.Brass, round, knurled fitting.One end of the fitting has a cylindrical knob end with a smooth surface; the other has a broader cylindrical knob with a knurled surface to allow for gripping and turning.

A set of 8 tickets that were used on the St Kilda to Brighton Electric Street Railway for the various sections, from August 1921. Has the fares printed on them and the ticket numbers. See reference pages 117 to 118 for details and various figures for examples. The ticket with the blue stripe appears to be another or earlier system.Yields information about the paper tickets used from August 1921 on the St Kilda Brighton tramway until 1928Set of 8 paper tickets glue to a ruled sheet of foolscap paper. Has been stamped cancelled.tickets, vr, vr trams, victorian railways, st kilda brighton

Extract from the 1957? Tramway Conference of the two tramway systems - notes on Brinell hardness of brake shoes, rails and wheels, tyres on hand, tram 32 and second life tyres, brake adjustment and settings, slack adjusters, renewable cups and steam cleaner use. Date based on two references to 1957 in the sheet.Demonstrates minutes of the 1957 Tramway Conference.Typed foolscap page of a carbon copy document - page 2 - other pages missing.Has three sets of notes in ink written in.tramcars, tramways, bogie trams, pony axles, costs, tramcar maintenance, brake shoes, tram 32, brakes

Use to identify a tramway employee - a trackman - Track maintainer. Would have allowed free travel when on duty and to and from work. Used possibly from mid 1910's when the Board was formed until it was replaced by the MMTB in 1921 or when a different identification system was implemented. Made by Stokes and Sons Melbourne.Demonstrates the method of identifying cable tram employees. Round pressed brass badge with the words "Trackman" and number "240" pressed into the centre of the badge around the top half of the badge "All Lines" with small horizontal lines within the individual letters. Has the Tramways Board logo on the lower part of the badge. On the rear of the badge, two metal lugs have been soldered onto the badge and a single-piece leather strap with a buttonhole cut into it to enable it to be worn on a uniform. The leather strap appears to have been refitted at one stage - marks on rear from previous straps. Second copy No. "236" badges, tramways, trams, employee pass, tramway board, track cleaner, track maintenance

Drawing details brake rigging and dimensions for a Brill 22E truck. Dated 4/8/1947, prepared by the SEC Geelong branch, signed by H N Hornabrook 6/8/47 showing the layout and loads on each part of the brake system, drawing No. T1647. See item 9025 and 9857 for other versions.Yields information about the brake rigging for Brill 22E trams and demonstrates the activities of the SEC Geelong office.Drawing - blueprint, titled "Brake rigging dropped centre double bogie tram Brill maximum traction truck 22E, Trams Nos. 31,""D1775" in ink on top sheet right hand corner.brill 22e, drawings, brake rigging, geelong

2 page document, photocopied. Document details Geo Mackay's development of Annals of Bendigo, referring to Bendigo as part of Ravenswood Run. Mentions, Captain Charles Hutton who occupied Wild Duck and the McIvor Creeks and the Campaspe as far as Barnadown. Charles Sherrard ( Mt. Alexander North) Coliban system, Hallas' band later Northcote band and gold seeking and production. First Easter Fair in 1871 is discussed. Unknown author and no date. On top of first page late 1940's in pencil.bendigo, bendigo easter fair, easter fair society

Photocopy of photo showing four wheeled horse drawn vehicle with fringed canopy. Male driving. Large light on side of vehicle. Inscriptions written across top 'The last cab to run between Eaglehawk and Bendigo. On back in grey lead ' FJ Stephens, Cabman' The last horse drawn cab to ply between Bendigo and Eaglehawk. The introduction of the tramway system in 1900 saw a rapid decline in the need for horse cabs along the line. (Bendigo Historical Society Inc).place, transport, horse drawn vehicle

Typed letter to R. J. Bartle, Esq., from D. O'Connor, Engineer and ?, Chief Engineer, of the National Roads and Motorists Association (N.S.W.) dated November 8, 1936. Letter mentions four tests done in a car over a stretch of ground to measure fuel consumption. Tests were done with and without the device installed in the fuel system. Paper has printed letterhead and the names of the President, Vice-Presidents, Hon Treasurer, Council and Secretary with the AAA and NRMA emblems on the left side of the page.sciences, instruments - general, scalebuoy, bill ashman collection - correspondence, national roads & motorists' association (n.s.w.), n.r.m.a. house, australian automobile association, r j bartle esq, hon j c watson, hon g r w mcdonald, charles ludowici esq, alderman james mcmahon, j bryden brown esq, d m cooper esq, e h cowdery esq, c r davidson esq, hon j m dunningham mla, a m graham esq, a s lumby esq, rev father w nicol, dr harold norrie, dr f antill pockley, ald h l primrose mla, a e rudder esq, lt-col g c somerville cmg dso, major blair wark vc dso, g a l wilson mla, h i johnson fiis, d o'connor?

Plaque: ‘Hans W Egli/Ingenieur / Fabrikation von flechenmashinen [sic; ?] / Pat. O, Steiger / Zurich II / No 2566. Sole Agents for Australia / Peacock Bros./ Business Systems Company / 558 , 560, 562 Collins St., Melbourne / and at / Sydney, Adelaide, Perth’ Plaque: ‘Presented to . / Department of Information Science / Melbourne University / by the / Gas & Fuel Corporation of Victoria / This calculating machine was used by Engineers of the Metropolitan Gas Co and Gas & Fuel Corporation / from 1917 to 1970’

Photograph - black and white. Written on the back of the photo - Joseph Brady 1828 - 1908 Civil engineer who designed early Colilban system of waterworks. This photo was taken from a self portrait Frank Cusack of the Bendigo Advertiser had on loan from a Pru McKechnie of Huntly who was apparently a descendent of Joseph Brady. Frank Cusack had a 'diary' kept by Brady which had this painting in it plus numerous other paintings, etc. John Ashby R.W.C. (R. Water Commission) 10.4.87person, individual, joseph brady 1828-1908, john brady collection.

Yields information about the views of the Councils, and an editorial from the Council, SEC views.Foolscap sheet of plain paper, with rounded corners, with 2 newspaper cuttings, concerning the mooted closure of the Ballarat Tram system 6 Feb 1962. All from The Courier, unless noted otherwise. 1 - "Cities may join for best bargain on trams" - reporting on City Council meeting the previous evening - quotes Cr. Chisholm, Nicholson, Roff, Mills - all supportive of the trams. 2 - "Retaining the trams" - Editorial - notes that the decision is based on economics, public good and better than buses.closure, letter to the editor, editorial, sec, city of ballarat

Yields information about an heavy hail storm in event on the Friday afternoon before the closure of the Victoria St line and the depot appearance at the time.Set of three Black and White photographs of trams passing or at the depot after the big hail storm on Friday afternoon 21/8/1971. .1 - No. 27 in Wendouree Parade, west bound. .2 - No. 42 entering the depot - tram has the destination of Mt Pleasant and has a SEC Briquettes roof advert. .3 - Scrubber in the depot yard. Photo by Charles Camera, at the time of the first closure of the Ballarat system, 23/8/1971 when the Victoria St line closed. trams, tramways, depot, closure, wendouree parade, tram 27, tram 42, scrubber