Document - 1st page of a draft of a report on a visit by the Chief Engineer to Adelaide during April 1952. Looks at the issues facing Adelaide tramways, deficits, old tramcars, use of trolley buses, and his general impressions. Includes notes on the H class tramcars and their use, the worn nature of the track and the lack of continual improvement to the public transport system.Has a close association with the MMTB Chief Engineer Mr. EakinsTyped foolscap sheet with corrections or changes in blue ink.trams, tramways, chief engineer, adelaide

Photo shows one of the A class tramcars, No. 1, originally built for The Prahran & Malvern Tramway Company in 1910-11, then transported to the isolated Footscray System in 1923-24. Most were withdrawn between 1928 and 1931. Possibly at the Ballarat Rd terminus. Also shows the crew, Conductor and Driver in MMTB Uniforms. Collected by Keith Kings.Yields information about the original Melbourne A class trams and MMTB Uniforms.Black and White photograph of MMTB A Class Tram No 1. On rear in ink - "MMTB A - No. 1 terminus at Ballarat Road (?)" KS Kings Collection (about 1925), 1920s.tramways, trams, class, tram 1, pmtt, crews, uniforms

The photograph shows Geelong 7 as built, understood to be a test tram prior to the opening of the system. Photo taken in the then Corio Terrace, now Brougham Street Geelong 1912. Has a number of men on board the tram - depot workers for the photograph? See Item 4314 for another photo looking the other way and item 8612 for a framed version.Shows Geelong tram No. 7 as built.Black and White photograph with details on rearHas SEC Publicity photo stamp on the rear and number 9/274 and a pencil note "Corio Terrace before opening In March 1912"geelong, mesco, tram 7, corio terrace, opening, tramways

Work started on the Lauriston Reservoir in 1939 as part of the Coliban water system and was officially opened by Victorian Premier, Albert Dunstan in 1941. Capacity was increased in 1946 when steel spillway gates were added. Although these had been part of the original design they could not be added at the time of the building because of post-war steel shortages.Bendigo Advertiser ''The way we were'' from 2003. on tour: school of mines civil engineering students visit the construction site of the Lauriston Reservoir in 1940. Left to right: Les Nankervis, Ron Watts, instructor Syd Power, an unknown student and Cliff Binks. The clip is in a folder.newspaper, bendigo advertiser, the way we were

The Bird Mark 4 is an anaesthesia assistor or controller with pressure and volume controller to be driven by a respirator. Combination of Mark 4 with respirator makes an automatic anaesthesia respirator eliminating manual bagging. The machine can work through Boyle anaesthetic system. It is designed for both paediatric and adult application. (Drugs and Equipment in Anaesthesia Practice, Aruna Parameswari, 2019)Green metal box atop a clear plastic unit with a black bellows inside, which forms one part of the overall unit. The unit is attached to a pole, enabling height adjustment. The pole is, in turn, attached to a set of four castors [not original].White text on black stick on strip on top of metal box: DO NOT PULL APART / FOR USE IN THEATRE ONLY A series of instructions are printed in white text over the unit.anaesthesia assistor, anaesthesia controller, pressure controller, volume controller, paediatric, adult

In 1883, NSW did not yet have a fully implemented system of compulsory civil registration for births, deaths, and marriages. While births were being registered, the information and format of birth certificates would vary. The NSW Registry of Births, Deaths and Marriages was established in 1856, but it took some time to become fully operational and widely adopted. A Certificate of Entry in Register of Births, Entry No. 1883/80 of Hebe Hews Date of Birth 22nd April 1883, Birthplace Hay N.S.W. The certificate has a New South Wales coat of arms symbol at the top with No. 329728 on the right. Form No. 6A is on the top left. Details of the entry are written and signed by the District Registrar. A purple small stamp on the bottom left has New South Wales written above a crown symbol and Registrar of Births, Deaths, and Marriages below.The full details of the Name of the Entry are listed as above, '1883/80 Hebe Hews 22nd April 1883 Hay N.S.W.' The signature of the District Registrar is written in black ink.birth certificates, certificates, documents

Timetable - route 70 - Wattle Park - Princes Bridge, dated 22/2/1998, published by The Met, with Yarra Trams logo as well, and PTC name on the rear cover. Has a map of the route, forward by Geoff Lockwood Operations Supt of Camberwell depot, the Met Fare system, an advert for tram hire, timing points, and contact information.Demonstrates a timetable at the time of the formation of Yarra Trams when it was operated by The Met and the PTC.Timetable - printed, centre stapled, 24 pages.tramways, timetables, route 70, wattle park, the met, yarra trams

This photograph shows the interior of the Valley Worsted Mill in 1923. The mill was first established at this time, and the photo shows the interior after tooling up but prior to the mill actually commencing operation. This photo is one of 31 in total and shows several Noble combs. The donor worked at the Valley Mill for many years. This mill still exists in Swanston Street, Geelong and is now being used by Melba Industries (an Austrim-Nylex company) to produce Jumbuck Nylon wool packs. "These 12 machines ended their working life in 1981 when the mill switched from the Bradford system of wool combing to the Continental system, the reason being was that the cost of maintaining them became too high, also the replacement rectilinear combs production rate was far greater and achieved higher yields although it could be argued that the Noble combs quality was superior". - Greg AldridgeBlack and white image showing the interior of a textile mill with machinery. Slightly overexposed on the right side.valley worsted mill, combing, noble comb, geelong

The Recco system was developed in response to an avalanche tragedy in Are, Sweden in December 1973. The inventor and founder of RECCO, Magnus Granheed assisted in the rescue work. He was frustrated by the primitive methods for locating buried victims that existed at that time, by “probing” with ski poles and digging at random. Unfortunately two people were found deceased. created a passive reflector that could be carried by a skier at all times. After careful research and consultation with professional rescuers, the first prototype was finalised in the beginning of the 80s. In 1983, the company called RECCO was founded. Today the system consists of two parts: a reflector integrated into clothing, boots, helmets and body protection worn by skiers and riders and a detector used by organised rescue teams. These avalanche reflectors were given to participants at the 1987 Interski International Ski Institute Instructors' conference held in Banff, Canada.The invention of these reflectors was critical to increased safety for participants in outdoor activities including skiing at Falls Creek,Two Recco Reflectors which are worn on a skier's equipment or clothing. These strips contain a passive reflector which can be detected by searchers in an emergency situation.From left to right: INTERSKI Banff 1987 / RECCO Avalanche Radar Reflector / INTERSKI ARE 1991recco reflectors, recco system, avalanche rescue, magnus granheed

This Engine Room section of a ship's telegraph system was part of the equipment of the Ports and Harbour ship the SS Rip. The vessel serviced and maintained the lights and buoys at Port Phillip Bay and Queenscliffe. The SS Rip was possibly the former gunboat "Albert". The ship’s communication system that was used from the late 19th century to early-to-mid-20th-century is called an Engine Order Telegraph (E.O.T.) or ship’s telegraph. The system has two parts, the Bridge Section and the Engine Room Section. The Bridge Section is usually mounted on top of a pedestal, and the Engine Room Section is often attached to a vertical surface. The standard commands printed or stamped onto the dial are the directions of AHEAD and ASTERN, and the speeds of STOP, FULL, EASY, STD. BY. and FIN. ENG. The ship’s pilot on the Bridge of a vessel sends his Orders for speed and direction to the to the Engine Room with the E.O.T. He moves the lever or levers, depending on the number of engines the ship has, to change the indicator on the Bridge Section’s dial to point in the new direction and speed of travel. This change causes the Orders to be duplicated on the Engine Room Section’s dial and a bell to signal the change simultaneously. The engineer then adjusts the ship’s engines and steering equipment to follow the pilot’s Order. The manufacturer, Mulne Bros., was a copper and brass works at 166 Sussex Street Sydney, in December 1892, and previously from 1870 at 128 to 130 Sussex Street. The company made and sold a wide range of equipment including machinery and gauges for the Railways.The Engine Room section is significant for being part of the communications system on the ship SS Rip, owned by Melbourne's Ports & Harbours department and used to service and maintain the navigation signals of Port Phillip Bay and at Queenscliffe in the mid-20th century. The dial is an example of marine equipment made in Australia and used for the safety of Victorian vessels. It is also significant for being made by an early Australian manufacturer, Milne Brothers of Sydney.Engine Room Section of a ship’s telegraph or Engine Order Telegraph (E.O.T.). The round metal dial has inscriptions stamped around the edges. The inscriptions are nautical terms for direction and speed and include the maker’s details. The dial was made by Milne Bros. of Sydney. It was part of the equipment on the "SS Rip" in Victoria.Black paint around dial: "MILNE BROS. / MAKERS / SYDNEY" "FULL EASY STD. BY " "FIN ENG. EASY FULL" ""ASTERN" "STOP" "AHEAD"flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, marine technology, marine communications, engine order telegraph, e.o.t., ship’s telegraph, bridge section, engine room section, ship’s engine telegraph section, marine telegraph, milne bros., milne brothers, sydney, copper and brass works, ports & harbours ship, ss rip, gunboat albert, service ship, maintenance ship

Electric staff - Electric staff instruments The staff and ticket system was still too inflexible for busy lines, as it did not allow for the situation where the train intended to carry the actual token was cancelled or running very late. To provide for this, the electric train token system was developed. Each single-line section is provided with a pair of token instruments, one at the signal box at each end. A supply of identical tokens is stored in the instruments, which are connected by telegraph lines. A Staff can be removed from one instrument only if both signalmen co-operate in agreeing to the release. Once a Staff has been removed, another cannot be removed until the token which is "out" is replaced in either instrument. (There are variations on this sequence of events.) By this means, it can be ensured that at any one time, only one token is available to be issued to a driver. Staff belonging to adjacent sections have different configurations to prevent them being inserted into the wrong instrument. Nevertheless, in the Abermule train collision in 1921 and lax working procedures allowed the safeguards provided by the electric Staff system to be circumvented; a driver was handed a Staff for the wrong section, and without reading the information listed on the staff, proceeded on the mistaken belief that the Staff was correct. To prevent this, it became a requirement in the UK for the signals controlling entry to the single line section (starting or section signals) to be locked at danger unless a token has been released from the relevant Staff instrument. Historic - Victorian Railways Electric Staff Instrument Electric Staff Instrument made of Iron , Brass and Glasspuffing billy, electric staff instrument, victorian railways

The heavy twin tanks formerly contained vaporised kerosene which was used as a fuel to light the lantern. Kerosene became available in the 1860s as the oil industry in the United States developed, and vaporised kerosene soon became the most common system of illumination. The kerosene vapour lamp was perfected by Chance Bros. for burning the light in their renowned lenses. The system involved vaporising kerosene under pressure and mixing it with air and then burning the vapour to heat an incandescent mantle. The lamp had to be watched throughout the night in case a mantle broke, and the tanks needed to be maintained by hand-pumping each hour or so. Kerosene tanks like these were developed in the early twentieth century, and kerosene as a fuel was phased out by electricity, with the last kerosene system in Australia eventually replaced in 1985. The wick lamp in Gabo Island’s light was altered to a vaporised incandescent kerosene mantle burner in 1909. They would have been in use until 1935, when the light was electrified and the original first-order lens was replaced by a fourth-order lens. The Gabo Island tanks, which are presumed to be those used in the lighthouse between 1909 and 1935, are not attached to the optical apparatus and are no longer in the lighthouse. They are also missing the pressure gauges that were formerly attached to the top of each cylinder. Cape Schanck has a pair of unattached tanks, which are not historically associated with the lighthouse. Point Hicks has an iron stand that formerly supported its lighthouse oil tanks. Despite their lack of intactness, the Gabo Island tanks have first level contributory significance for their provenance to the lightstation and historic association with the lantern’s original Chance Brothers first order lens, which was removed in 1935Two large green cylinders standing in a metal frame. There is also a pumping mechanism attached to the stand with a wooden handle.

Report produced by 1 Fd Svy Sqn 13 May 1985 of Carto Hydra Phase 2. This project was undertaken using Department of Mapping and Surveying (DMS) Queensland source material and to test the Draft specifications for the Raster Scanning Sub-System at the Army Survey Regiment. This production Report has been compiled to give a full record of the task.photocopy of an A4 typed report produced by 1 Fd Svy Sqn royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt, asr, 1 fd svy sqn

The moulds were used to make casting moulds to manufacture spare parts for the high pressure valves in the main pipeline for the Otway Water Supply System. Used in conjunction with valve stem mould, Wf mould and high pressure scour valve mould (casting) water mains. It is unknown whether these moulds are originals from the 1930's or later copies.Used in the manufacture of spare parts for the Otway Water Supply pipeline Wooden casting moulds3" SCOUR VALVEpipelines, otways

Used an illustration in, "Green Grows Our Garden," A.P. Winzenried p103. Also enlargement B92.563. Note by T.H. Kneen 26 February 1992, "Oliver Frost and Thea Rimmer married later and became joint ? at the Ripponlea Gardens administered by the National Trust. Lex Hodge & Peter Trudgeon became teachers in the TAFE system in horticultural apprentice trade training."Black and white photograph. Enlargement of B91.137. 2 copies. Botany class using dissecting microscopes. Left to Right: Dian Durrant, Oliver Frost, Lex Hodge (standing), Peter Trudgeon, Thea Rimmer.On reverse stamp, "Photograph by Publicity Branch Victorian Department Of Agriculture Ref. No. c.1695K."botany class, dissecting microscopes, dian durrant, oliver frost, lex hodge, peter trudgeon, thea rimmer, green grows our garden, a.p. winzenried, ripponlea gardens, national trust, teachers, tafe, horticultural apprentice, publicity

WP Computer Systems Town Hall Hotel Main Street, Post Office, Stawell Mall Name of Stawell, Hardings, Anthony & Co, O Gilpin, Earles, RSL Stawell, Oban, Earle Family, Common School, 502, Hospital, Eventide, Stawell Brewery, Wadsworth, Shamrock Hotel, Bricklayer Arms, Court House, Shire Hall, News Office.Stawell Times News Colour Special feature November 11 1994 32 PagesThe Stawell Times News 125th Anniversary Stawellhistroy

Image of a Ballarat bogie car waiting at the City stop with the Boer War Memorial in front. Taken on the last day of operation of the SEC Ballarat tramway system - 19-9-1971. In the background is the National Mutual building, Golden Star Chinese Cafe, Georges Oyster / fish shop and Ballarat TV and Electrical store which looks a bit of wreck inside.Yields information about the last day of operation of the Ballarat SEC tramways.Digital image - 120 negative tramways, tramcars, ballarat, last day, closure, sturt st, boer war memorial

No 40 at Sebastopol terminus surrounded by crowd. Destination Special. The very last tram - Greg Triplett. The tram ran through to Hospital corner, where all the passenger had to get off and carried SEC staff through to the depot for the final northbound trip. Taken on the last day of operation of the SEC Ballarat tramway system - 19-9-1971. Yields information about the last day of operation of the Ballarat SEC tramways.Digital image - 120 negative tramways, tramcars, ballarat, last day, closure, tram 40, last tram, sebastopol

Tramcar record for SEC Ballarat No. 16, builder, system location, short history and work in Ballarat. Loose on the same folder was a typed sheet of paper dated 21-6-55, noting the SEC proposal for this tram, not intended to recondition it. See btm5526i1.jpg See Reg Item 5614 for a photo of the 21E truck after the body was sold and disposed of.Yields information about the history of individual tramcars in Ballarat.Handwritten note on foolscap lined sheet outlining the history of Ballarat Tramcar No. 16, who built for, date to Ballarat, painting and other changes to the tramcar as compiled by Wal Jack. Part of a series on each SEC Ballarat operated tramcar, except for the ESCo trams. Contained within Reg Item 5507 - Foolscap binder with green covers, black binding edge and metal clips. trams, tramways, ballarat, tramcars, tramcars of ballarat, tram 16

Form used to advise crews that they had been reported for a breach of Rule No. or Special Order No. etc. Has space for the date (1930s), Signature, date, time, and trip. Seeks the person's explanation which had to be in writing. Used post the SEC takeover of the Ballarat system. Headed the Electricity Supply Department of the SECV. See item 9123 for the subsequent form used.Demonstrates a form used to advise crews of a breach of the rules etc and seeking an explananation.Preprinted form - No TYE1-38, on plain off white paper.tramways, forms, sec, secv, rules, behaviour

Contains part of the negatives that the photographer took of Bendigo and its tramway system on a 1968 visit. For the actual prints see the Album 8637 and the digital images held in the Museum's photo collections files. Many of the photographs were used in Brian's book, "By Birney to Golden Square" Includes as well 12 photographs of track work on the Glenelg Adelaide tram line.Demonstrates the work of Brian Andrews.Negative folder - paper folder by R. Gunz (Photographic) Pty Ltd containing 6 strips of 35mm negatives in a plastic clear sleeve.Folder No. 61 - 35mm - SEC Bendigo and Glenelg - MTT Glenelg line 24-3-68 and 30-3-68trams, tramways, brian andrews, negatives, bendigo, glenelg

Contains part of the negatives that the photographer took of Bendigo and its tramway system on a 1968 visit. For the actual prints see the Album 8637 and the digital images held in the Museum's photo collections files. Many of the photographs were used in Brian's book, "By Birney to Golden Square" Includes as well 172 photographs of J and K class locomotives at the Ararat locomotive depot.Demonstrates the work of Brian Andrews.Negative folder - paper folder by R. Gunz (Photographic) Pty Ltd containing 6 strips of 35mm negatives in a plastic clear sleeve.Folder No. 64 - 35mm - SEC Bendigo 12-5-68 and VR Western line 11-5-1968trams, tramways, brian andrews, negatives, bendigo, ararat, steam locomotives, j class, k class

The document from August 1986 contains information that a Legatee can use to fulfil his role. The purpose is stated as "The purpose of this kit is to provide the means and explanations necessary for you to understand the contact system and the role each Legatee is to play." It has policy information and outlines aims and objectives. Also there are templates for letters that can be used in approaching recently bereaved widows.A record of the policies and procedures in place for many years to support the Legatees in their work.Black and white A4 photocopy x 33 pages of a kit for legatees to use published in 1986.policy, objectives, procedures

Provides the financial details and performance for the operator of the Melbourne cable system operator for 1896, the Melbourne Tramway and Omnibus Co (MTOCo). Extracted from a Melbourne newspaper for 11/8/1896. Notes the dividends, disputes over payment of rates, the death of A. W Robertson, one of the directors, costs, assets, and passengers. The report was presented by the Chairman, Mr. F B Clapp.Yields information the financial situation in 1896 for the Melbourne cable Tram operator, MTOCo.Typed document on a single sheet of blue paper - extract - from a Melbourne newspaper dated 11/8/1896tramways, trams, cable trams, mtoco, annual reports