This is a Camera Gun Recorder used in conjunction with a Gyro Gun Sight type 14A, G. G. S. Recorder Mk2 contained in a wooden box with hinged lid and retaining catch. The recorder consists of a metal enclosure with an electrical power supply cable fitted with a three pole female plug connector. A small access cover in the enclosure can be opened to replace the Recorder Magazine. There is a transparent aperture window on the underside of the enclosure.The recorder enclosure is inscribed with the Department of Defence mark and the following, "14A/3629, G.G.S., RECORDER, Mk2, 24V., XX 12012". There are small controls on the narrow side of the recorder which are marked "START, 0, 5, 10, 15, END" and "DULL, S.S. BRIGHT". The recorder magazine is inscribed with the Department of Defence mark and the following "14A/4008, G.G.S., RECORDER, MAGAZINE, MKII". raaf, royal australian air force, gun, fighter, photography, ww2, world war 2, camera, aircraft, bomber, aerial

Standard issue United States M1 pattern steel helmet, olive drab in colou, stretch cotton cargo type net, with fibreglass liner. On the inside of a strap in the liner '8415-153-6671' is printed in black ink. This number would appear to be the "Federal Stock Number (FSN)" which was used 1949 to 1975 when ti was replaced by "National Stock Number (NSN)' by additional of 00 after the first 4 numbers. this would indicate that it was made in USA. The chin strap and liner are both complete and fully operable. These helmets were first issued in 1941 to the United States Armed Forces. They were adopted after the Korean War by the Australian Defence Force. In the 1990s they were replaced by the Kevlar based Personnel Armour System-Ground Troop (PASGT) type helmet. However, as evidenced by this helmet, some M1 Steel helmets were not replaced in-service by the PASGT helmet and survived into the early 21st Century. Used by Royal Australian Army in Vietnam in areas where mines were significnat, such as Long Hai's mountains (together with US flak jackets), and also by Royal Australain Navy.An example of an Australian Army issue M1 steel battle helmet complete with fibreglass liner. This helmet type was issued to Australian defence personnel during the Vietnam conflict. The inner line has a transfer on the front " Australian Military Forces" with rising sun badge. The steel outer has an olive green elastic cover (similiar to cargo net) to hold camouflage material. The M1 is two "one-size-fits-all" helmets: an outer shell made of metal and a hard hat-type liner that is nestled inside the shell and contains the suspension system that would be adjusted to fit the wearer's head. Helmet covers and netting would be applied by covering the steel shell with the extra material tucked inside the shell and secured by inserting the liner. The helmet is 7 inches in height, width is 9.5 inches and length is 11 inches. The weight of a World War II era M1 is approximately 2.85 pounds including the liner and chinstrap. (From Wikipepedia) the inner line has a transfer on the front " Australian Military Forces" with rising sun badge.steel helmet

Used with dress uniform for ceremonious purposes.An example of the standard issue webbing belt used by Australian service personnel. The name "Bretterecker" and the number 360053, (possibly a post World War 2 service number) is written in black ink on the inside surface of the belt. The belt has been "blackened" for ceremonial use and has brass fittings, the 2 angled buckles normally located on the rear of the belt have been removed. The 1937 pattern equipment (also known as '37 webbing') was an item of military load-carrying equipment. Pattern 37 replaced the 1908 Pattern and 1925 Pattern—on which it was based—and was standard issue for British and Commonwealth troops from its introduction in 1937, throughout World War II, and in the post-war period until it was superseded by 58 pattern webbing. The design was confirmed on 8 June 1938 and wide-scale issue began in 1939. Towards the end of World War II, some 37 Webbing was produced in jungle green for troops fighting in the Pacific Theatre, although purpose-made 44 Pattern Webbing was then introduced for the humid jungle conditions, being lighter in weight, quicker drying, and rot-proofed.[ Although 44 Pattern continued in use with the British Army for jungle warfare in its various post-World War II colonial conflicts, it did not replace 37 Pattern in general service, which was in use up until the introduction of 58 Pattern. However, 37 Pattern was used for ceremonial purposes and still issued to Cadets in the 1990s. 1937 Pattern Webbing was made from cotton webbing, which was waterproofed and dyed before being woven. The fittings were made of stamped brass and it was produced by various manufacturers.Written in black ink on the inside "Bretterecker" and the number 360053, possibly a post World War 2 service number.webbing belt, dress webbing

A standard issue RAAF blue Other Ranks' woollen forage cap with oxidised brass RAAF badge on left hand side. The two buttons at the front are made of black plastic. The cap is lined with black cotton fabric. The crown opening has been sewn up with large black running stitches in heavy black thread. A rectangular shaped white cotton maker's label that bears various markings indicating size, year of manufacture, etc. is sewn inside the left hand side of the cap. A label attached inside the cap has the following: "V 330, 1944, MADE IN AUSTRALIA, SIZE 7" and the D^D marking with the letters "A F". The cap is also marked with the name "FRASER" and the service number "RAAF A36508"raaf, air force, australia, world war 2, ww2, airmen, aircrew, kings crown badge,

A set of two spent ammunition rounds complete with projectile, which are souvenirs of World War 1. These are from the 1 inch Nordenfelt machine gun, the projectiles are made from solid steel with a brass jacket, have an exposed steel tip and have a groove near the base. Both the brass cartridge case and the projectile are highly polished and have been chromed (?). These are examples of trench art having been engraved with floral patterns and the words "to Fred from NL". These items were owned by Frederic Harley MM, s/n 910, a WW1 Artillery Gunner in the 36th Australian Heavy Artillery Group who served in France. He enlisted in Frankston and lived in Frankston after returning to Australia. Further details of the Nordenfelt MG are available, refer AWM < http://www.awm.gov.au/collection/RELAWM10737.005/ >One of the cartridges has the following stamped on the base: "RɅL" or "R↑L", "1884" and "lV" image "DɅD" or "D↑D"

c World War IIA tinplated steel container originally used to transport and store loose black tea leaves. This container has a tight fitted lid. The container exterior is painted with a golden colour varnish. This container originally stored 6 pounds of loose tea leaves.Imperial Pure Tea 6 pounds net Packed by Henry Berry & Co (Australasia) Ltd Melbourne Australia Defence Wilson Bros Pty Ltd Melbtea, tin, henry berry

An Australian Army standard issue webbing pouch for carrying a pair of wire cutters. These were issued to infantrymen during World War 2 and worn on the standard webbing belt. Refer item 00385 and 00385.1

Spent ammunition casing from a World War 1 German 155mm field gun (maybe Naval?). This casing was manufactured in February 1916. This is an example of trench art having had an Australian Army 'rising sun' hat badge attached to the outside surface of the case.

Collection of printed documents (menus, etc.) originating from the Royal Australian Navy ship H. M. A. S. Manoora which was in service during World War 2. Refer items 00393.1, 00393.2, 00393.3 and 00393.4

Small statuette of a World War 1 ALH (Australian Light Horse) Officer presumably made of pewter, mounted on a marble base. The base has a small replica version of the Australian 'rising sun' badge, the badge is similar to the 'kings crown' version worn during World War 1.

Pocket book size with buff grey linen hardcover imprinted with black lettering. Example of the New Testament that was presented to members of the Victorian Contingent of the Australian Imperial Force during World War 1. The inside front cover has a label insert with a printed message "Printed by the British and Foreign Bible Society and signed Fred G Barley, Gen Sec. Melbourne 1916". The opening pages have a blue stamped imprint with the following inscription "Presbyterian Soldiers' Institute Royal Park Camp" in an oval shaped border. Book published by the British and Foreign Bible Society, 146 Queen Victoria Street, London. The front cover has the following inscription in black print, "NEW TESTAMENT".

1914-1918 Memorial Plaque In early 1920 it was announced that the next-of-kin of all Australian servicemen and women whose deaths were attributable to the First World War would receive a memorial plaque and scroll "as a solace for bereavement and as a memento". The memorial plaques were not uniquely Australian. In fact they were designed and produced in Britain and issued to commemorate all those who died as a result of war service from within the British Commonwealth. The idea for the plaques was originally conceived mid-way through the war. In 1917 a competition was announced to obtain a suitable design and 800 entries were eventually received. The winner, Mr. E. Carter Preston of Liverpool, England, was chosen in 1918. He was awarded a prize of 250 pounds. Mr Manning Pike directed the manufacture of the memorial plaques at the Memorial Plaque Factory set up at Acton, London. Some later plaques were also made at the Woolwich Arsenal. The cost of manufacturing so many plaques must have been considerable. Each plaque had the name of the soldier commemorated individually embossed (some were engraved) as part of the design. The full name was given without any indication of rank or honours to show the equality of sacrifice of all those who had lost their lives. The scroll designed to accompany the plaques was of thick paper, headed by the royal coat-of-arms, and bore the following message: "He whom this scroll commemorates was numbered among those who, at the call of King and Country, left all that was dear to them, endured hardness, faced danger, and finally passed out of the sight of men by the path of duty and self-sacrifice, giving up their own lives that others might live in freedom. Let those that come after see that his name is not forgotten". Underneath the message the serviceman or woman’s name, rank, honours and unit were written by hand in red ink. Because of the late arrival in Australia of the plaques many scrolls were sent out separately. A message from the King, "I join with my grateful people in sending you this memorial of a brave life given for others in the Great War", was included with the scroll. The first plaques were distributed in Australia in 1922. Each plaque was sent out from Base Records Office at Victoria Barracks in Melbourne by second-class mail. Approximately 60,000 plaques were issued in Australia. Families of deceased members of the Royal Australian Navy and the Australian Army Nursing Service also received plaques and scrolls First World War Memorial Plaque, bronze, in recognition of Private Sydney Frederick TURNER, from C Company, 9 Battalion who was KIA at Pozieres on 25 July, 1916. it is housed in a wooden surround with pattern embossed in the margins with a liking of the rising sun at the top. He is recorded on the Villers-Bretonneux Memorial and is listed with an Australian Red Cross Society Wounded and Missing Enquiry Bureau File, a copy of which is attached.Embossed around the edge of the plaque "HE DIED FOR FREEDOM AND HONOVR". The name of the serviceman is embossed on the plaque, right of centre, SYDNEY FREDERICK TURNER

Spare parts kit for the Lamps Signalling Daylight used by the Australian defence forces during World War 2. A small dark green painted metal container with a hinging lid which contains parts and instructions, including three spare lamp bulbs. Within the container there is a smaller tinplate container with a lid which has electrical contacts and connectors. Refer item 00417The container lid has the following inscription: "LAMPS SIGNALLING DAYLIGHT BOX SPARE PARTS MKII" and "PMG 1942"

The recipient of this medal is believed to be VX44669 Private James Robert Clancy of Thougla Upper which was in the Shire of Upper Murray. Private Clancy was born in Sandy Creek on 30 August 1903 enlisted in the Army on 8 July 1940 and was discharged on 8 March 1943. He served in the Signals Section of the 2nd Australian Anti-Aircraft Regiment.Municipalities in Australia recognised their residents who enlisted in World Wars by the issue of some form of recognition. This is a nice example of a medallic form of such recognition.A collection of items presented by the family of WWll Australian Army serviceman James Robert Clancy VX44669. Clancy was a signalman in the 2/2 Heavy Anti-Aircraft Regiment. Refer to items 00456.1, 00456.2, 00456.3 and 00456.4.

Small, packaged First Field Dressing issued to Australian and British service personnel during World War 1. The package is made of a tough, protective (waterproof?) fabric and comes complete with a safety pin for use as a bandage. These were carried by soldiers and used for initial treatment of wounds. This item has a printed label with instructions for use and was packaged by John Tye & Son, London in May (?) 1917.There is a label affixed to this item with the following inscription printed in black: "War Office", "Medical Division", "First Field Dressing", "JOHN TYE & SON, London, May (?) 1917"world war 1, ww1, dressing