Showing 3474 items
matching biscuit-makers
-
Ballarat Tramway Museum
Document - Letter/s, Birmingham City Transport, Birmingham Fleet, 1947
Cover letter from Birmingham City transport to W.Jack, of 23/1/47, forwarding photos and duplicated lists of buses, trams and trolley buses on 2 separate sheets. 153.1 - Foolscap typed sheet - Birmingham City transport letterhead - signature and stamp of General Manager. An "Associated Photo Engravers Ltd" adhesive label with "Birmingham City Transport - Empire House" typed over has been stuck over letterhead. Size - 330H x 203W. 153.2 - Quarto size sheet - duplicated - list of US (Nos. Reg. Nos, maker (Chassis and engine), year of make and type -both sides - dated 5/11/1946. Size - 242H x 190W. 153.3 - Foolscap sheet duplicated list of tramcars - car numbers, number off, trucks, maker and type of motor, year of make and number withdrawn. Trolley buses - bus numbers, registration number, make. Typed and date in service. Dated 21/1/1947. Images of documents added 5/9/2013. Sticky label on letterheadtrams, tramways, birmingham, uk trams, buses and trolley buses -
Mission to Seafarers Victoria
Plaque - Wall Plaque, Lightkeepers of the Mission to Seamen, c.1950
Original owner Nora O’Connor the donor’s adopted aunt, migrated to Canada during WW2 and also worked as volunteer at the Vancouver Mission to Seamen where she met her husband Edward O’Connor who later migrated to Australia. NB Lightkeeper membership category across many of the Missions globally, was usually reserved for women busy as home-makers with children and also as a Junior membership category for children.The platter was accompanied by other materials from the Vancouver club of Senior Light keepers and together the material provides a parallel insight and reference to this group. It also provides a historical link within the worldwide network that is now recognised as the Mission to Seafarers. The Lightkeepers Auxiliary was also active with the Mission in Williamstown where they helped raised the funds to set up the new mission in the E,S & A Bank in 1943 which was furnished thanks to the High Commission of Canada.Circular , varnished wooden tray or plaque with beaded edge froming 'lip". Oval hand painted design of two flags on flag pole, one yellow hoist above blue flag with horizontal white stripe across centre, on a ground of turquoise green. U.C. Lettering in gilt around edge of design (see title). On verso, ink stamp plus an old hanging metal wire.indigo ink stamp : hand painted (1st word almost indecipherable)wooden platter, mission flags, nora o'connor, lightkeepers' auxiliary, lightkeeper, overseas missions, vancouver, canada, british columbia, mission to seamen -
Warrnambool and District Historical Society Inc.
Instrument - Musical Instrument, Violin and stand, Early 20th Century
This violin was made by Mr Edward Richter who lived in Warrnambool for 78 of his 85 years. he was born 10/03/1853 and was an expert model maker making models of ships. The Warrnambool Museum in 1937 held a model of the Cutty Sark which he had made from timber from the wreck of the Enterprise which was wrecked on Warrnambool beach. Violins were another of of his hobbies.This violin has a connection to Warrnambool through the maker who was a long time resident of the town. It belongs to an era when many people were interested in and turned their hand to making objects such as this.The body of the violin is stained brown in colour with black neck and bridge. The four strings are nylon. The pegs and scroll are timber of a finer grain than the front and back.The tailpiece and end button are black material. The bridge is missing. The stand is rectangular with violin shape cutout, painted in red with a ply backing. Small leather strap on one end. Six large and two small drilled holes around front section.Richter written in large letters on back of standwarrnambool, edward richter, handmade violin, richter warrnambool -
Warrnambool and District Historical Society Inc.
Functional object - Motor Cycle Lamp, Joseph Lucas Ltd, Birmingham, England, 1922
This lamp was produced in 1922 as a lighting mechanism for a motor cycle. It is a Lucas lamp, with the trade name 'Chieftain'. The firm of Joseph Lucas Industries was established in 1860 in England, initially making scoops, buckets and plant holders. In 1875 it began making lamps for ships and after 1902 lamps and other components for motorised vehicles. Today, after merging with a North American company, it is a maker of components for both the automotive and the aerospace industries. This item is retained as an example of motor cycle lighting that would have been used locally in the 1920s.This is a metal lamp with a round base, a cylindrical body and a rounded lighting mechanism enclosed in glass. There is a screw lid on top of the oil container, a mechanism for attaching the lamp to the vehicle and two small round glass buttons on either side of the lighting area. The lamp has traces of silver colouring but is very rusty. There is an old card containing some handwriting attached to the lamp.Lucas Chieftain 1922motor cycle lamps, joseph lucas ltd, vintage vehicle parts -
Warrnambool and District Historical Society Inc.
Child’s Coat, Ena Heazlewood, C 1945
This garment was donated by the daughter of Ena Heazlewood, the maker of the item. Mary Josephine (Ena) Todd was born in Warrnambool in 1920 and worked as a hairdresser at Josephine’s Salon in Warrnambool. In 1942 she married Jack Heazlewood, a stoker on the H.M.A.S. Sydney at the time. He was also born in Warrnambool. The couple later lived in Sydney. This coat was made by Ena Heazlewood and was worn by both her son, John and her daughter, JudithThis coat is of interest as one made by a former Warrnambool lady in the mid 20th century. It is also an example of the style of children’s clothing worn 70 years ago. This is a child’s coat, hand-sewn and made of white cotton (towelling or boucle type material). The coat is lined with white cotton material and has a pointed shirt collar with inset sleeves and flares out slightly from the chest area. The coat opens at the front and has two cream-coloured buttons and two button holes. There is some slight staining on the coat. vintage clothing, todd & heazlewood families, warrnambool -
City of Moorabbin Historical Society (Operating the Box Cottage Museum)
Personal Effects, pipe 'Butz-Choqin', c1900
Butz-Choquin is a French pipe maker founded in 1858 by tobacconist Jean-baptiste Choquin and Gustave Butz.The company was established in Metz; it remained there until 1951, when it was purchased by the Berrod-Regad company. It was then relocated to Saint-Claude, Jura. The company was acquired by Denis Blanc in 2006. Butz-Choquin's first pipe, the Choquin pipe, was a curved pipe with a flat-bottomed hearth, albatross bone, and silver rings.A 'Butz-Choqin' tobacco pipe with walnut wood stack-like bowl, horn stem and silver perforated lid. The octagonal base unscrews. Silver rings around the lid and join from bowl to stem BUTZ-CHOQIN / Made in France / N0.3 / VERCOURS / BC (engraved) smoking pipes, tobacco, butz-choqin company france, walnut wood, albatross bone, market gardeners, pioneers, early settlers, moorabbin, brighjton, bentleigh -
Royal Australian and New Zealand College of Obstetricians & Gynaecologists (RANZCOG)
Smith-Hodges style pessary associated with Dr Frank Forster
This is Albert Smith's modification of a Hodges pessary. Uterine and anal pessaries were in use from the early 1900s onwards. The shape and style of pessaries varied with the introduction of new O & G techniques, and the materials they were made from varied with the maker. The Hodges-Smith pessary was usually hand made and was in demand as an intra-uterine device in the 1960s. For the prevention of uterine or abdominal infection, this type of pessary was changed frequently.Small, irregular vulcanite/wire pessary, covered with red rubber. Inscribed "PATENT".pessary, intrauterine device -
Bayside Gallery - Bayside City Council Art & Heritage Collection
Painting - acrylic on canvas, Mike Green, Keefers, 1976
In the early 1900s, Melbourne builder Charles Keefer was hired by the Moorabbin Council to build the municipal baths at Beaumaris. In 1903, Keefer took over the Beaumaris Boat House and enlarged it to form Keefer's Boat Shed where day trippers and holiday makers could hire boats and venture out into the bay. Although rebuilt following the devastating storms in 1934, Keefer’s Boat Shed was completely destroyed by fire in 1984.Realismkeefer's, boatshed, bayside, coast, beaumaris, fence, water, bay, charles keefer, pier, mike green -
Wodonga & District Historical Society Inc
Functional object - Baby Max Camera, Tougodo, 1950s
The Baby-Max is a Japanese subminiature camera popular in the 1950s and 1960s. It was often sold in a pack containing the camera, case and boxes of Kikufilm Panchromatic, a film specialised for toy cameras. Each film took ten 14x14mm images on 17.5mm paper backed roll. It was manufactured by Tougodo, a Japanese camera maker, active from 1930 to the early 1960s. The film with this camera has an expiry date of November 1962.This item is significant due to its popularity in the 1950s and demonstration of the evolution of camera technology.The Baby-Max is a Japanese subminiature camera. It has an elongated body with polygonal ends. The viewfinder is integrated in the top casing. There is a knob on the photographer's right to roll the film and there is a small fake knob on the left. The back is hinged to the right and locked by a sliding bar on the left. It contains a single uncovered window in the middle. The lens has a fixed focus and aperture, and has no markings. There is a lever to operate the shutter. The case is of brown faux leather. It is accompanied by a box of KIKUFILM.Around the central lens: "BABY-MAX / MADE IN JAPAN"baby max camera, cameras, cameras 1950 -
Flagstaff Hill Maritime Museum and Village
Tool - Groove Plane, Prior to 1950
A moulding plane is a specialised plane used for making the complex shapes found in wooden mouldings that are used to decorate furniture or other wooden object. Traditionally, moulding planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding. The blade, or iron was likewise formed to the intended moulding profile and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding planes for the full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. The subject planes blade is designed to cut a groove and it's blade maker (M Gilmour) is not listed by collectors of vintage planes as a known plane makers of the 19th or 20th century.A vintage tool made by an unknown maker, this item was made commercially for firms and individuals who worked in wood and needed a tool that could produce an ornamental finish to timber. These profiled planes came in various shapes and sizes to achieve the required decorative finish. This item is a significant tool from the mid to late 19th century that today is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes were created on timber by the use of hand tools. Grooving PlaneM Gilmour stamped on bladewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, moulding plane, groove plane, joiners tools, hand plane, carpenters tools -
Flagstaff Hill Maritime Museum and Village
Tool - Joiner, Jack or Smoothing Plane, Akin & Son, 1900 to 1966
The subject item is a smoothing plane traditionally wood planes were blocks of wear resistant hardwood, often beech or maple, which were worked to the shape of the intended moulding or had a flat blade use for achieving a flat and smooth finish to timber. The blade, or iron was likewise formed to the intended moulding profile or for smoothing and secured in the body of the plane with a wooden wedge. A traditional cabinetmakers shop might have many, perhaps hundreds, of moulding and flat bladed planes for a full range of work to be performed. Large crown mouldings required planes of six or more inches in width, which demanded great strength to push and often had additional peg handles on the sides, allowing the craftsman's apprentice or other worker to pull the plane ahead of the master who guided it. The maker Atkin and Sons were a prolific Birmingham plane maker, active from 1863 to 1900 when they became Atkin and Sons Ltd and traded until 1966. Their trademark was actually "BENEFACTUM" which is Latin for "well made."A well-made tool from the early 20th century from a well-known company that ceased trading in Birmingham in 1966, today this tool from this company is quite rare and sought after by collectors. It gives us a snapshot of how furniture and other decorative finishes as well as smoothing timber projects were created by the use of hand tools. Tools that were themselves handmade shows the craftsmanship used during this time not only to make a tool such as the subject item but also the craftsmanship needed to finish timber.Jointer or Jack Plane with fishtail handle, Size of iron 2 1/2 inches wide, Stamped GN inside W made by Akins and Sons Birmingham UKflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, jointer plane, plane -
Ballarat Tramway Museum
Document - List, State Electricity Commission of Victoria (SECV), "Numbers and Particulars of Trams" - Ballarat, 28/9/1970
List titled "Numbers and Particulars of Trams", dated 28/9/1970, split into separate sheets for single truck and bogie trams which includes the Scrubber tram. Tram 20 has been deleted following its demolition on 17/9/1970 (see item 1088). Gives details of where purchased from, date of purchase, type, body builder, seating capacity, overall length, overall height, overall width, Lightning arrester, controller make and type, Truck Maker and type, type of truck, axle type, wheelbase, axle diameter, motors type and maker, Motor horsepower, Armature bearings, suspension bearings, gear teeth, Air compressor make and type, Brake Valves make and type, Governor make and type, Weight in tons. Has a list of abbreviations on the base of each sheet. See also 8721 and 8722 for other versions - different dates and 8690 for a Bendigo list. Note: Framed copies of both Ballarat and Bendigo are held in the depot. Yields information about the dimensions and equiipment on Ballarat Tramcars operated by the SEC.Typed List of tramcars and their details for Ballarat - carbon copy two double foolscap sheets.tramcars, ballarat, equipment, lists, data -
Flagstaff Hill Maritime Museum and Village
Domestic object - Food Safe, Willow Ware Pty Ltd, 1920-1950
Willow started business in 1887 as a metal working company based in Melbourne Australia, making tinned biscuit and tea canisters. The outbreak of the First World War saw their manufacturing change to making armaments and essential packaging for the war effort. In the early 1920’s, the Willow brand was established. Making tin plated canisters and baking pans with the well-known Willow pattern, imprinted on them. Some other items in production at this time include billies, boilers, basins and Coolgardie safes. In the late 1950’s, the company ventured into plastics production. Stepping away from its very successful tin plating industry of more than 50 years. In 1965, the company name changed to Willow Ware Pty Ltd, to be more closely linked to its Willow brand. Willow Ware is still in business today. A food safe known as a “Coolgardie” meat storage made by an emerging Australian company no longer in bushiness. This item gives a snapshot into early Australian manufacturing specifically aimed at the Australian market. Safe metal kitchen safe with two shelves, a hinged door and latch and a small swivel wire handle at the top. cream colour . "Made in Australia" "Willow" warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, willow ware, domestic item, coolgardie meat safe, meat safe, food safe, food preservation -
Flagstaff Hill Maritime Museum and Village
Domestic object - Food Safe, Willow Ware Pty Ltd, 1920s -1950
Willow started business in 1887 as a metal working company based in Melbourne Australia, making tinned biscuit and tea canisters. The outbreak of the First World War saw their manufacturing change to making armaments and essential packaging for the war effort. In the early 1920’s, the Willow brand was established. Making tin plated canisters and baking pans with the well-known Willow pattern, imprinted on them. Some other items in production at this time include billies, boilers, basins and Coolgardie safes. In the late 1950’s, the company ventured into plastics production. Stepping away from its very successful tin plating industry of more than 50 years. In 1965, the company name changed to Willow Ware Pty Ltd, to be more closely linked to its Willow brand. Willow Ware is still in business today. A food safe known as a “Coolgardie” meat storage made by an emerging Australian company no longer in bushiness. This item gives a snapshot into early Australian manufacturing specifically aimed at the Australian market.Safe metal kitchen food safe with 2 shelves, a hinged door and latch and a small swivel wire handle at the top. Painted light green, rusting.Willowwarrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, safe, food safe, meat safe, coolgardie safe, domestic object, kitchen object, willow ware, food preservation, kitchen safe -
Flagstaff Hill Maritime Museum and Village
Functional object - Crucible, The Patent Plumbago Crucible Company, circa 1878
This crucible was raised from the wreck of the LOCH ARD. It is one of six similar relics, in a range of sizes, now in the Flagstaff Hill collection. All bear markings to indicate their manufacture by the Morgan brothers of Battersea, trading as the Patent Plumbago Crucible Co. A crucible is a container used for purifying and melting metals so that they can be cast in a mould to a predetermined shape and use. They must withstand extremely high temperatures, abrupt cooling, and shed their contents with minimal adherence. The addition of graphite to the traditional firing clays greatly enhanced the durability of industrial crucibles in mid-Victorian Britain, a significant technological advance at a time of great activity and expansion in foundries and demand for refined metals. The Morgans first noticed the advantages of graphite crucibles at the Great Exhibition held in London in 1851. Initially they contracted to be sole selling agents for the American-made products of Joseph Dixon and Co. from New Jersey, but in 1856 they obtained that firm’s manufacturing rights and began producing their own graphite crucibles from the South London site. The Morgans imported crystalline graphite in 4-5 cwt casks from the British colony of Ceylon (now Sri Lanka) and mixed it with conventional English (Stourbridge) clays to be fired in kilns. Their products were purchased by the Royal Mints in London and India, and exported to official mints in France and Germany. They were successful exhibitors of their crucibles and furnaces at the London Exhibition held in 1861 (Class 1, Mining, quarrying, metallurgy and mineral products, Exhibit 265, Patent Plumbago Crucible Co). The range of sizes represented by the six crucibles retrieved from the LOCH ARD, suggest they may have been part of a sample shipment intended for similar promotion in the Australian colonies ― at Melbourne’s International Exhibition to be held in 1880. A summary of the LOCH ARD cargo manifest, by Don Charlwood in ‘Wrecks and Reputations’ does not mention any crucibles, implying that they were not part of a larger consignment of uniform items. A newspaper account of an 1864 tour of the Morgan brothers’ ‘Black Potteries’ at Battersea indicates: “All the pots were numbered according to their contents, each number standing for one kilogram, or a little over two pounds; a No. 2 crucible contains two kilogrammes; a No. 3, three kilogrammes, and so on.” These numbers are obscured by marine sediment on three of the crucibles in the Flagstaff Hill collection, but those legible on the remaining three are 5, 6, and 8. None of the six are of the same size from a visual appraisal. The shipwreck of the LOCH ARD is of State significance ― Victorian Heritage Register S417A No. 6 size Morgan’s graphite crucible (i.e. 6kgs capacity). The crucible rises in a slight curve from a smaller flat base up to a wider top with a (chipped) pouring lip. It was recovered from the wreck of the LOCH ARD. The artefact is largely accretion free despite its long period of submersion at the wreck site. It has a number of visible maker’s markings which identify the manufacturer and the smelting capacity of the pot. The graphite crucible is in fair and stable condition. The number “6” which is framed in a square. The letters “THE PATENT PLUMBAGO CRUCIBLE COMPANY” and “BATTERSEA WORKS COMPANY”. Below rim "... GNS"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, graphite crucible, plumbago crucible, morgan's crucible company, loch ard, crucible, fluxing pot -
Flagstaff Hill Maritime Museum and Village
Typewriter, Fox Typewriter Company, Model 24 started from 1906 on
Fox's model 24 began production in 1906.Typewriter, Fox Typewriter brand, black with gold and green fancy transfers on sides, maker's name across top. Four rows of keys with Capital shift, back spacer pre-set shift. Keys include letters fractions, numbers, symbols, plus red and black type. Spacer marked in imperial measure. Printer on machine "FOX TYPEWRITER CO, GRAND RAPIDS, MICH USA" and "THE FOX TYPEWRITER CO. NO. 24 GRAND RAPIDS, MICH. USA" Printer on machine "FOX TYPEWRITER CO, GRAND RAPIDS, MICH USA" and "THE FOX TYPEWRITER CO. NO. 24 GRAND RAPIDS, MICH. USA"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, typewriter, office equipment, commerce, business, fos typewriter company, fox model 24 typewriter -
Flagstaff Hill Maritime Museum and Village
Instrument - Letter Scale, 1920s to 1960s
This scale was owned by Dr Angus, whose training and experience included chemistry and pharmacy. This is a sliding balance scale. The object to be weighed, such as a letter or a dose of medicine, is placed on the square metal plate and the weight, the slider, is moved along the notched metal arm and adjusted until the arm is horizontal, then reading is recorded of the figure the pointer on the slider is positioned. This design of small is often referred to as a letter scale. This item was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969.The scale is significant as an example of 20th century measuring and weighing equipment. It is also important for its association with the W.R. Angus Collection, which is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being a historical example of medicine, administration, household equipment and clothing from the late 19th to the mid-20th centuries. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Scale; a small sliding balance letter scale. The scale has a flat metal platform and a toothed metal balance arm with cylindrical brass weight. These are attached to a decorative metal stand that is mounted onto a shaped lacquered black wooden base. The sliding weight causes the arm to pivot on the stand. The arm is marked into equal-length segments from 0 to 8. Each segment is marked into halves. There is no maker’s mark. The scale is part of the W.R. Angus Collection.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, dr w r angus, letter scale, postal scale, balance scale, single arm scale, chemist scale, pharmacy scale, office equipment, retail equipment, sales equipment, measuring instrument, weighing instrument, technical instrument, medications, w.r. angus collection -
Bendigo Historical Society Inc.
Photograph - T J ANDERSON, PRINTER & STATIONER, c1950
Sepia photo. T J Anderson Book Seller, Printer and Stationer, agent for M Weigels, cut paper patterns. Colonial Mutal Insurance. Australian Widows Fund Life Insurance. Andersons is in a section of a 2 story brick building, with verandah and balcony. There is a watch maker on the right hand side. 3 men and 1 lady are in front of the shop, on man is on the balcony. Markings/Inscriptions: John Lay, Eaglehawk. Hand written on back is: taken 1950.John Layorganization, business, t j anderson, john lay, eaglehawk -
Anglesea and District Historical Society
Cigarette Tin, Millhof Co Pty Ltd, Estimated date: 1920-1950
Small, very rusty cigarette tin would have held 20 De Reszke virginia cigarettes. The cigarettes were named after Jean De Reszke (1850-1925), a famous Polish opera singer and were advertised as "The Aristocrat of Cigarettes". Produced by J. Millhoff (a Russian cigarette maker living in London). A special blend of tobacco - that was believed not to damage the famous singer's voice. In gratitude Millhoff was allowed to sell the brand as "De Reszke" cigarettes.Top: De Reszke / VIRGINIA / The Aristocrat of / CIGARETTES. Two coats of arms - just visible on lid. Sides: 20 De Reszke 20 / De Reszke CORK / Godfrey Phillips (Aust) Pty. Ltd., Melbourne, Australia. MILLHOFF & C0 Pty Ltd. Printed inside: "Just as good and pure a cigarette as was especially made for and always smoked by that great singer Jean De Reszske". De RESZKE Virginia Picture of gentleman above (head and shoulders). smoking, de reszke, cigarettes, geoffrey phillips (aust) pty ltd, millhoff -
Bendigo Historical Society Inc.
Medal - BENDIGO EASTER FAIR MEDAL 1902, 1902
Bendigo Easter Fair medal 1902, 2 heart shaped medals, 1 gold in colour with ribbon of red and navy, medal with Scotch thistles in centre surrounded by wording Bendigo Easter Fair 1902, attached to a metal pinned clasp with words In Charitys Cause, marked on reverse Stokes & Sons. 1 silver (dirty) minus ribbon same design, same wording plus engraved on back B Clifford & makers mark Stokes St.Sil.Stokes & Sonsevent, easter fair, bendigo easter fair -
Tennis Australia
Racquet, Circa 1975
A Tenex 'Pro 700' metal tennis racquet with double shaft and metal bridge; round head with net made of nylon and red stringing. Tenex labels on black plastic shaft casing and labels on sides of shaft with model and maker names. Handle wrapped with tan leather grip tape. Plastic butt cap with adhesive label featuring graphic of net & ball and 'T' logo. Materials: Metal, Nylon, Adhesive tape, Leather, Plastic, Stringtennis -
Clayton RSL Sub Branch
Button, For Kith and Kin, 1915
Hyams, Frederick. Pte 17982 4th F.TroopWorld War I Red Cross fund-raising badge. According to contemporary newspaper articles the Commonwealth Button Fund issued buttons of this design for a Victorian Red Cross appeal in July 1915. All funds raised during the appeal were to be used for the support of the Australian Red Cross and the servicmen in their care. Between 300,000-400,000 of the buttons were distributed. Pezikian & Anderson (2017: 14) identify the badge's maker as the Victorian Christian Endeavour UnionCircular pressed metal badge with a plastic coated obverse, metal back and attached pin. In the centre of the obverse, a printed illustration of a Red Cross flag and printed text appears on a red ink background surrounded by a white border. The badge is discoloured. The metal back of the badge is soiled and tarnished. -
Bendigo Historical Society Inc.
Document - CONNELLY, TATCHELL, DUNLOP COLLECTION: LEGAL PAPERS, 1901 to 1903
Document. Various legal papers. 1 - 1902 - Bradford, E., re costs. 2 - 1901 - Gray W. B., re costs. 3 - 1901 - Bradford E., re costs. 4 - 1903 - Trustees of the Estate of Charlesworth Wm, deceased, re costs. 5 - 1902 - Meaney, J, costs re Sexton. 6 - 1901 Boxall E., Executrix of the Will of McLean Jno, late of High St Bendigo, cabinet maker, deceased, re costs.cottage, miners, connelly, tatchell & dunlop, bradford e., gray w. b., charlesworth wm., meaney j., sexton, boxall e., mclean jno. -
Warrnambool and District Historical Society Inc.
Functional object - Note book, Webb Bros, Early 20th century
This little slate notebook was given by Webb Brothers to their customers as an advertising tool. The Webb Brothers Company a large manufacturing firm in Lava Street, Warrnambool, making windmills, dairying utensils, steam boilers, and oil engines. They were also engineers, brassfounders and wholesale tinsmiths and plumbers. Motor car work became a speciality in the 1920s. In 1921 they opened a branch of their business in Melbourne (Bayswater) and the name of the firm became Presha Engineering Company. This notebook is of some interest as it was provided by Webb Brothers, an important company in Warrnambool in the late 19th and early 20th centuries. It is also an example of the advertising techniques used by business houses at that time and an interesting example of the use of a slate pencil and slate pages as a recording mechanism.This is a brown leather notebook with three pages of slate material making eight spaces for recording notes. Notes recorded in slate can be rubbed out and the space used again. The slate pencil container is on the side of the notebook but the pencil is missing. The cover is mottled with creamy-yellow lines. The pages are edged in red and there is scribble on some pages. Front page of notebook: ‘Before purchasing talk to Webb Bros. & Co., Windmill Makers, Engineers, Ironworkers etc. Lava Street, Warrnambool ‘Phone 27, Made in Germany’ Scribble on first page ‘Wanted known’ webb brothers, warrnambool, brassfounders -
Bendigo Military Museum
Uniform - UNIFORM, DISRUPTIVE PATTERN, NAVY, CTE Pty Ltd, 2010 - 2011
Naval Uniform - brand new. 1. Jacket - 75% cotton, 25% polyester fabric. Grey, dark grey and dark green disruptive pattern. Metal stud closures. Epaulettes - gold embroidered crown, crossed anchors and "AUSTRALIA" unit shoulder flashes - both embroidered with gold, white and red thread - R. three headed dog/ "HMAS CERBERUS" - ships badge. L. Australian Navy White Ensign. Chest patch - embroidered gold, red and white RAN Patch - Crown, Anchor and R.A.N. logo. 2. Trousers - 75% cotton, 25% polyester fabric, grey, dark grey and dark green disruptive pattern.Both - Maker's label - black print on white label "CTE PTY LTD/ JUNE 2010/2011" / "75% cotton 25% polyester/ FR treated". Then extensive information on laundering care of fabric. "MADE IN AUSTRALIA" .uniforms, dpnu, ran -
National Communication Museum
Instrument - Telephone, 1877
William Jackson Thomas is credited with making the first ever telephone call in Victoria. Thomas was a customs inspector at the Geelong Customs House and a keen amateur scientist, astronomer and woodworker. He experimented with electricity and induction to develop his own telephone soon after its invention by Alexander Graham Bell. He built most of the experimental telephone equipment himself – right down to the screws. According to the Geelong Advertiser, on 27 December 1877, Thomas held a telephone conversation with friends in a summer house 40 metres away.This instrument is of great historic significance as the instrument which made Australia's first telephone call in 1877, between two houses in Geelong. Although predated by Alexander Graham Bell's invention, this instrument is an example of Australian innovation and design; characteristic of Australian communications history. The instrument has excellent provenance, carrying a descriptive plaque about the use of the item. As an early prototype of a telephone, it is an incredibly rare example of communications technology.Stained wooden rectangular box containing mechanism with circular turned section at one end being the receiver and transmitter. There are 3 metal screws at the rear and a leather strap running from one of these to the transmitter/receiver. A label is on the base.On label: "First telephone made in / Victoria 1878 / Used experimentally between / Geelong and Ballarat and Geelong Queenscliff. / Maker WJ Thomas Esq. / Late H.M. Customs Geelong / Certified by A.C. Thomas For the above W.J.T."telephone, inventions -
Flagstaff Hill Maritime Museum and Village
Clothing - Baby Clothes, c. early 1900's
These handmade baby clothes are a fine example of home crafts, showing attention to detail. The original owner and maker of these handmade silk baby clothes is unknown. They were previously owned by the mother of the donor. Her name was Mary Patricia (Pat) Mulready 21.4.1934 – 4.2.2007 who was born, died and died Warrnambool. The clothes were possibly purchased from an opportunity shop as clothing for her daughter Eileen Mulready, 3.10.1968 - Jan 1991.Baby clothes, hand crocheted fine, fawn coloured silk thread. Set comprises booties (2) with button and small floral embroidery, round bib and round cap with chin tie.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, handcraft, baby clothes, crocheted baby clothes, home crafts, pat mulready -
Eltham District Historical Society Inc
Book, Bio Print, Connecting Threads & Thoughts produced by The Creating Spirit Group, 2014
This book collates the memories and stories behind the needlepoint kneelers from St Margaret's Anglican Church, Eltham and St Faith's Anglican Church, Montmorency. Contents include: The building of the two churches- how the kneelers were made - the stories of the kneeler makers - the kneelers (photographs and descriptions). The names of the creators of the kneelers include: Marjorie Taylor, Barbara Talbot, Molly Hennessey, Margaret and Ivy Reynolds, Jacquie Weekes and Ivian GilbertThis book is significant for the culmination of research on the contribution of women in particular to the life of the Anglican Church communities of Eltham and Montmorency in the 1980s.SoftcoverISBN 978066911076 [printed on sticker on title page] Presented on 30 March 2014 to: Eltham District Historical Society by the Creating Spirit group from St Margaret's Church Elthamst faiths anglican church, st margarets anglican church, kneelers, needlework, women, marjorie taylor, barbara talbot, molly hennessey, margaret reynolds, ivy reynolds, jacquie weekes, ivian gilbert -
Kew Historical Society Inc
Programme, Messrs Edward Cook & Co, Service of Prayer in this Time of National Crisis, 29 December 1915
Edward Cook & Co were soap makers and chemical manufacturers in Bow, London. The company registered its new name in 1898. It was later taken over by Unilever. The document, issued for use during the First World War for its employees is dated 29 December 1915. While days of prayer were traditionally conducted in parish churches, large companies also undertook to hold the services during World War 1. This work forms part of the collection assembled by the historian Dorothy Rogers, that was donated to the Kew Historical Society by her son John Rogers in 2015. The manuscripts, photographs, maps, and documents were sourced by her from both family and local collections or produced as references for her print publications. Many were directly used by Rogers in writing ‘Lovely Old Homes of Kew’ (1961) and 'A History of Kew' (1973), or the numerous articles on local history that she produced for suburban newspapers. Most of the photographs in the collection include detailed annotations in her hand. The Rogers Collection provides a comprehensive insight into the working habits of a historian in the 1960s and 1970s. Together it forms the largest privately-donated collection within the archives of the Kew Historical Society.Order of Service of Prayer held on 29 December 1915. The service included a Prayer for our Soldiers and Sailors and a Prayer for Victory and Peace. world war i, wwi, the great war, religious services, homefront, first world war, 1914-1918 -
Warrnambool and District Historical Society Inc.
Souvenir - Cup and Saucer Soldiers Memorial Warrnambool, 1940s
This is a Warrnambool souvenir item made about the 1940s. It features the Warrnambool War Memorial which is a Warrnambool landmark popular with the makers of souvenir items for sale to local residents and tourists to the city. The War Memorial was originally designed as a memorial to the local soldiers who enlisted and died during World War One. It was built in 1924 and first used for an official function in 1925. A World War Two memorial section added was added in the 1950s. These items are of interest as examples of the souvenirs made to sell to tourists sixty years ago. The items were made of good quality bone china. The Warrnambool War Memorial still features today on some items sold as souvenirs of the City.This is a white bone china cup and saucer set - a Warrnambool souvenir piece. It has a black and white image of the Warrnambool War Memorial on the side of the cup and on the base of the saucer. There is gilding on the edges of the cup and its handle and on the saucer. The base of both items has a British Crown symbol on it. Under the War Memorial images : ‘Soldiers Memorial, Warrnambool Vic.’ On the base of cup and the saucer: ‘Melba Bone China, Guaranteed Made in England’ warrnambool war memorial, warrnambool souvenir, warrnambool