The chairs together with a large table originally were used by the Phillip Island Council for monthly shire meetings in the old shire hall in Thompson Avenue. When the new offices opened on the corner of Church Street & Thompson Avenue in 1978 modern furniture was installed. They were then donated to the Historical Society. Article and photo of Bev Forrest, Cherry McFee & Elaine Alexander sitting on the newly reupholstered antique chairs in the museum. museum chairs and table, chairs restoration, cherry mcfee, bev forrest, elaine alexander, phillip island & san remo advertiser, shire of phillip island

The high chair bought originally for the Garth boys Bernard and Phillip in the early 1930's. Then handed down to Mr and Mrs Bob Parker's children in the late 1940's.White painted, wooden child's high chair on four metal wheels. Turned wooden back rails, adjustable height, wooden lift-up tray.highchairs

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.

This President's chair was used by the Shire of Bulla Presidents/Mayors to sit in at Council meetings pre 1963 in the Sunbury Memorial Hall and possibly at the old Shire of Bulla Council offices in Bulla.Large brown upholstered wood frame President's chair. Small front turned legs. Small padded arm rests. High back padded with seven (7) buttons.A design carved into sides of front arm rests.sunbury, shire of bulla, shire presidents, memorial hall, george evans collection

This chair is believed to have come from the homestead of Dr. Daniel Curdie (1810-1884) who arrived in Australia in 1839. He established a property called Tandarook ten miles south of Camperdown. At first he combined farming with a medical practice as he was the only doctor in the coastal regions between Geelong and Portland. After 1850 he concentrated on farming and exploratory tours of the region. The chair may have been used for some or all of his ten children.This chair is of considerable significance firstly because of its rustic nature and age, being a hand made item and secondly because of its association with Dr. Daniel Curdie, one of the important pioneers of the Western District.This is a hand made wooden chair with two struts at the back and four struts supporting the legs. The seat is also wooden. Wooden pegs in some places have been replaced by screws.rustic furniture, childs highchair, dr. daniel curdie

Chair donated to Melbourne City Mission (probably in 1941) by Mrs RODDA of Williamstown and used at the Port Branch (Jubilee Hall) until its closure . From the 1950s it was used by Sister Norma BARNETT, who kept it until her death. It then went to her 'sister' Janne RAY, and on her death to Janne's daughter Tracey RAY. She donated this plus related items to PMHPS in 2017 (refer 1506 and 3906).01 - solid wooden chair with peaked/pointed shaped back. Arms have rounded ends. Upright section of chair has two indented pieces and a small 4 leaf shape under the top of the point with a small brass plaque attached under it. .02 - Cushion - velourOn plaque "Presented to the Port Melbourne Branch of the Melbourne City Mission in loving memory of my husband N.P.Rodda. Died 28th November 1941 at Williamstown. A life lived for others. Lead kindly light.religion - melbourne city mission, sister norma jean barnett, jubilee hall, tracey jane ray, janne ray

The photograph depicts a rocking chair, a kerosene lamp, a bottle holder, and two epergnes.The photograph contains historical and research significance of domestic life in Beechworth. Through the depiction of the historical rocking chair, the kerosene lamp, the bottle holder and the epergnes, the picture displays some of the everyday objects that would have been found within a Beechworth house. Although kerosene lamps and bottle holders are no longer in widespread use, this photograph not only acts as historical document and depiction of both, but it also displays the evolution of everyday tools. The interpretive capacity of the photograph extends its significance as it contains the potential to reveal information regarding the domestic life of Beechworth residents. Moreover, it also has protentional to demonstrate the shifting designs of rocking chairs, kerosene lamps, bottle holders and epergnes.Black and white rectangular photograph printed on paper.Reverse: BMM A03328/ 1997.3132/ 28 1/2 ems/ E32k491/ THE OVENS AND MURRAY ADVERTISERrocking chair, chair, lamp, kerosene lamp, bottle holder, burke museum, beechworth

The bosun’s chair is a typical piece of equipment included on board a vessel in the late 19th and early 20th century. The nautical word 'bosun' is an abbreviation of the word 'boatswain' who is the person responsible for the repair and maintenance of the vessel. It could be used when rigging the sails and for rescue at sea, along with a thick rope anchored on shore or a rope between ships. It could also be used to move passengers to and from a ship as well as cargo on, to and from the vessel. A bosun's chair is a simple piece of equipment made from a short plank of wood and a sturdy piece of rope. It looks a little like a child's swing but usually has a pulley system that allows the user to adjust the length of the hanging piece of rope, and in so-doing adjusts the height above the floor or ground or sea. In modern times a harness would also be worn by the bosun’s chair user for safety reasons. Bosun's chairs are also used by window cleaners, construction workers and painters. The bosun’s chair is sometimes just a short plank, or even a canvas sling. The bosun's chair is significant for its association with maritime equipment carried on board a vessel in the late 19th and early 20th century for maintenance and safety purposes. It was occasionally used to save lives. The bosun's chair is also significant as an early version of equipment still used today. Since its invention there have been many safety features added in certain industries such as window cleaning and painting.Bosuns chair; flat smooth rectangular piece of wood, with rope passing through two holes at each end of plank and looped together above plank to form a suspended seat swing. Loops a are joined with knot work and ends are spliced together under the seat.flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, bosun's chair, bosuns chair, boatswains chair, rigging, maritime equipment, bosun's seat, life saving, marine technology, ship rigging

A gentleman's chair, gent's chair or grandfather chair is a term usually applied in Australia to a deep upholstered Victorian easy chair, often button-backed and with upholstered arms. The chair generally stood on short cabriole legs and had a 'spoon' or a wide balloon back. The 'show wood', that is, the polished frame, was usually mahogany or walnut, although many examples in Australian red cedar have survived. There are Australian versions of the gentleman's chair, ladies chair and matching settees, usually made from cedar, and occasionally from blackwood. As cedar is a softer timber than walnut, mahogany and rosewood, from which the English versions were made, the carving is usually not as crisp as in the imported version. However the Australian blackwood gentleman's chair is often difficult to distinguish from a good quality English walnut example. The Edwardian form of the gentleman's chair is much squarer in outline, with short turned legs and the arms are often supported by spindles. There was sometimes a row of spindles, like a gallery, beneath the top rail. The chairs were frequently upholstered in leather.An item probably made in Australia during the latter half of the Victorian era and is significant as it was made in Australia at a time when furniture and many other household items were imported from either America or England.Cedar Gentleman's armchair, upholstered and buttoned in brown leather, scalloped and carved with Prince of Wales Feather on back, arms are scrolled and carved with Acanthus leaf design and finished on tulip turned legs with brass and porcelain castors. circa 1870 Australian made. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, furniture, chair, armchair

Red Cross Workers in Bentleigh are preparing stretchers and other convalescent aids for fighting men overseas. In the background wooden crutches are leaning against the shed wall and beach chairs are being repurposed in the front of the image.Black and white image of a group of eight men standing in front of a shed with several of the men wearing work aprons suggesting manual labour with crutches leaning against the shed and beach chairsHand written in red ink enclosed in a circle: A18 / 70%community, world war i, first world war, wwi, manual labour, repurposing, red cross, crutches, bentleigh

"Today the Chalet lounges and hallways are stocked with a number of disparate furnishings of unknown provenance - table and chair settings... many ranging in styles from Edwardian and Art Deco periods. While they may appear to be original to the rooms, the items are not evident in any of the historic photographs surveyed in the course of this report, so their historical association with the Chalet does not appear to be strong and enduring. Some... appear to be domestic furnishings rather than those of a 'resort house'.Six lounge / club chairs, covered in brown vinyl. They are solid and bulky and have square, short block-like feet of dark wood.

After WWII demand for wheelchairs increased. The original wheelchairs were driven by the patient's hands pushing the wheels. Later a motor was added. Then the motor and battery were built into the chair under the seat. This was followed by developments in ergonomics (comfort), controls, comfort and performance.See KVHS 1796, KVHS 1797Used by Wilma Davies, a Kiewa Valley resident, who suffered from polio from the early 1950s.2 large wheels - The outer wheel is steel and the inner is rubber with metal spokes attached. The foot plates are of ribbed steel. The ribbed seat is blue made of thick canvas as is the back of the chair. Some plastic has been glued on the back. The arm rests are also covered with old torn plastic. There is a metal stick on the side used to brake the chair by being pulled enabling it to touch the wheel and slow it down or stop it from turning."Sibbing / Melbourne" on the foot platespolio, wheelchair, pandemic

Radio Transcript - 11 Foolscap pages, undated, given a reference to the connection of the Commercial Road tram line following conversion of St Kilda Road cable tram lines - early 1926. Presented by The Chairman, Mr Cameron, giving a short history of trams in Melbourne, formation of the Board, lists other Board members, the General Scheme, Railway electrification, public transport in Melbourne, William St extension, replacement of the cable trams, methods of conversion, reference to the Tramway Trusts, Mr. Strickland, Mr. Murdoch, W. Strangward, tramcars, speed of trams, use of buses and finally fares. Has a reference to the forthcoming conversion of the Commercial Road and Malvern Road cable tramsHas green pencil in top left hand corner "Chair"trams, tramways, public transport, radio stations, cable trams, conversion, general scheme, personnel

Barber's chair with a detached board for children to sit on, to modify chair height.

These Office chairs were originally placed in the front Office of the Soldiers Memorial Institute in 1921funded by the "Australian Mining Comforts Fund" and remained in use till approx 2012 when the Office was renovated. After the renovations to SMI in 2016 -18 they were then placed in what is now called the "Building and RSL History Room".1) & .2) Captain style chairs, solid timber construction, curved arm rests and heavy back rest. .3) .4) Padded cushions of white colour, one is very old the other purchased about 2007 to match.Under both seats just readable, "Melbourne ------ Co PTY --2 Down St Collingwood - European labour only"brsl, smirsl, comforts

Low drawing room chair. Round seat. Tapestry Upholstering back simular to arm chair stawell

This photograph shows Royal District Nursing Service (RDNS) Sister Meissen observing Mrs Lata as she transferred from her wheelchair onto a shower chair in the bathroom at her home. Sr. Meissen is based at the RDNS Moorabbin Centre. Patients were taught, and then supervised, by RDNS visiting Sisters in the use of safe transferring techniques. From the founding of the Melbourne District Nursing Society (MDNS) in 1885, known as the Royal District Nursing Service (RDNS), from 1966, their Trained nurses cared for patients in their own homes who required to be taught safe transferring techniques, e.g. from bed to wheelchair or from chair to walking frame etc. Their family members also needed to learn safe transferring techniques to enable them to care for their loved ones. RDNS employed a Physiotherapist who taught staff the correct techniques, not only for safety of the patient, but to reduce physical strain on RDNS nursing staff and patient’s family members. Sisters carried out General Care to those patients unable to care to their own hygiene safely, and, working towards independence where possible, the Sisters taught them safe transferring techniques using equipment such rails, shower seats, and hand showers.On the right of this black and white photograph is Royal District Nursing Service (RDNS) Sister Meissen standing and observing Mrs. Lata in the bathroom of her home. Sr. Meissen has short dark hair; is wearing a white gown over her uniform and wears a grey peaked uniform hat. She has a towel draped over her left arm, and is smiling at Mrs. Lata who is on her left and is sitting on a shower chair. Mrs. Lata, who is wearing a light coloured nightgown with flower motifs, is smiling up at Sr. Meissen and has her right arm raised with her hand gripping a rope pulley. Part of a wheelchair with the left arm removed is seen in the foreground; the seat of the chair is in line with the seat of the shower chair. A hand shower, taps and glass screen can be seen in the background of the photograph.rdns, royal district nursing service, rdns uniform, patient care, moorabbin centre, sister m. meissen, mrs lata

Wooden Folding Chairstawell

Two Royal District Nursing Service (RDNS) Sisters are assisting a young male patient who has a movement disorder, to change position in his reclined chair.The Trained nurses (Nurses) of the Melbourne District Nursing Society (MDNS), later known as Royal District Nursing Service (RDNS), visited patients in their home and gave best practice care in many fields of nursing, and to people of many cultures, throughout its 130 years of expansion. Initial visits not only assessed the specific nursing situation but the situation as a whole. Their patients ranged in age from babes, children, adults to the elderly and referrals were taken from Hospitals, General Practitioners and allied Health facilities. Some of the care the Trained nurse (Sisters) provided is as follows: – Post-Natal care given to mother and babe, Wound Care following various types of surgery, accidents, burns, cancer, leg ulcers etc. Supervising and teaching Diabetic Care, including teaching and supervising people with Diabetes to administer their own Insulin, and administering Insulin to those unable to give their own injections. Administering other injections and setting up weekly medication boxes. The Sisters performed Catheterizations on adults suffering from conditions such as Quadriplegia, Paraplegia, Multiple Sclerosis (MS), Motor Neurone Disease (MND) and Guillan-Barre Syndrome, and when required at school on children for e.g. those with Spina Bifida. The Sisters visited those requiring Cystic Fibrosis support and care; those requiring Haemo-Oncology care, including visiting children at school; those requiring Home Enteral Feeding care, and those requiring IV therapy at home and home Dialysis. Palliative Care was given including pain relief with the use of syringe drivers, personal care as needed, and advice and support to both patient and family. The Sisters provided Stoma management to those needing Urostomy, Ileostomy and Colostomy care and those requiring Continence care. HIV/AIDS nursing care was provided; visits to Homeless Persons were made. Personal care was given to patients ranging in age and with varying mobility problems, such as those with MS, MND, Guillan-Barre Syndrome, Poliomyelitis, Quadriplegia, Paraplegia, Acquired Brain Injury, to those following a Cerebrovascular Accident (Stroke), those with severe Arthritis and those with a form of Dementia. When necessary the elderly were assisted with personal care and advice given on safety factors with the use of hand rails, bath or shower seats, and hand showers. Rehabilitation with an aim towards independence remained at the forefront of the Sister’s minds and when possible using aids and instruction on safe techniques enabled the person to become fully independent. All care included giving advice and support to the patient and their Carers. The Sisters liaised with the persons Doctor, Hospital and allied Health personal when necessary.A coloured photograph showing two Royal District Nursing (RDNS) Sisters with a young male patient who is lying in a reclined chair. The Sister standing on his left is smiling; she has short straight dark hair, and is wearing a RDNS light blue apron over her royal blue dress and darker blue long sleeve cardigan. The Sister on the right hand side of the patient's chair is laughing. She has blonde hair and is slightly bent over the chair as her left hand is supporting his left leg. She is wearing the RDNS summer uniform of the day - a white short sleeve blouse under a royal blue V neck tunic style frock. Her right arm is bent and resting on top of the patient's chair and pillow. The young man has short dark hair and is smiling and looking towards the left of the photograph. He is wearing a dark blue long sleeve top and his right arm is extended toward the Sister on the left hand side of the photograph. His legs are over his coverings with his left leg bent at the knee. He is wearing light coloured pants and has a pink and white striped slipper on his foot. His pillow is white, and coverings seen are blue and white check, white, and a pale pink sheepskin. A wood board wall is in the background. A vase of flowers are standing on the part of a round low table that can be seen in the right hand rear corner. A pale lilac wall can be seen on the right hand side. A small section of a dark patterned carpet can be seen.royal district nursing service, rdns, rdns uniform, rdns patient care

This chair belonged to Dr Zacharin from 1970 until he donated it to the College in 2009. Its origins prior to this time are uncertain.Gynaecological examination chair, metal painted white, with two detachable metal stirrups with a back panel, seat panel and leg panel. The leg panel can be adjusted upwards to make a table. The back panel has an upright and two reclining positions. The seat panel has a side mechanism that makes the panel tilt backwards, so that a patient can be positioned head downwards with legs upwardsobstetrics

Henry Sutton was born in Ballarat into the musical Sutton Family. He is known as an important Australian inventor. A young girl sits on a chairhenry sutton, glass plates, photography, girl

Wooden high chair on wheelsfurniture, domestic-nursery

Wooden chair with leather seat. Manufactured by F.J. Crabb Sturt St S. Melbourne European Labor Only ornate, decorative

In 1983 the Yarra Valley group purchased a wheel chair for Anne Smythe, a Junior Legatee, the donation was photographed by the Leader Newspaper group, so perhaps it was used in a promotional news story at the time. Was in an envelope marked P8 Junior Legatee photographs, including the text "Legatee Ravenscroft, Junior Legatee Smythe, Wheel chair".A record of the outcome of charitable donations and the positive impact on the life of a young Legatee.Black and white photo of a junior Legatee in a wheelchair, white paper label attached.Photo has Legacy P8 in blue pen and stamped Copyright Leader newspapers in red ink. Paper label says "Legatee Len Ravenscroft (President, Melbourne Legacy) and Legatee Ted Evans (President, Yarra Valley Group) present a Carter motorised wheelchair to Junior Legatee Anne Smythe. The chair, valued at over $3,500 was purchased by Yarra Valley Group of Melbourne Legacy. 1983" in black type. Back of photo is stamped Copyright of Leader Newspaper Group in red ink.junior legatee, fundraising, len ravenscroft

Maybe made during WW 2 when building materials were scarce particularly in country townsLight wooden chair made from wooden packing boxes. Stabilised with bars on the back of the chair and between the four legsUnderneath the seat can be seen impressions that were stamped on the box . The words “Starch” and “boxes” can be read