Cololur photo of students Grade 1 - 2 S, 1996.education, primary, bendigo north primary school 1267.

Woollen jacket, Woollen trousers, Cotton Shirt. Jacket has stamped ... ' MADE IN / AUSTRALIA / 1954. Also 'COLLINGWOOD / TECHNICAL SCHOOL' at top of sleeves and 'AUSTRALIAN / CADET CORPS' fabric badge. Epaulettes on shoulders each with two symbols similar to Maltese Cross. Trousers have label 'CONWAY BROS. PTY. LTD. / ADELAIDE. 1968 / CLASS 8405-025-6190 / Y.F. PP2 / SIZE & WAIST 36 S / MATCHING JACKET 41 /42 S.collingwood technical school, school uniforms, australian cadet corps uniform, nmit

Notes on tools and machinery. Various page numbering indicates that these may have been distributed at intervals during the course.Original class notes from the 1920s.Black folder with Collingwood Technical School label on cover.Handwritten on front cover label: S.O.Tools / 1920's.collingwood technical school, cts, class notes, machinery, tools, nmit,

There are 32 boys and 16 girls in the class. Don Taggart, late president, is 3rd from the left in the front row.black and white post card fair conditionGrade 4B, Elwood Primary School. D.J.H Taggart, 58 Glenhuntly Road, Elwood 3184, Ph 531 6127. 1930's

The Q class were introduced as bogie flatwagons in the 1870's. Large Q wagons as shown were built to the 1920's In the early 1900's, some Q wagons were modified for Pintsch Gas traffic with a small pump motor cabin at one end and a tank for carrying the gas. Other conversions for traffic were as required. Examples were: sheet glass, skeletal underframes between workshops In 1926 the railways built two narrow gauge Garratt locomotives. As normal wagons were unsuitable for moving these locomotives a special skeletal wagon was built. The engines were split into units for transportation. It featured axle bearings and boxes from steam engines, had hinged buffers that could drop out of the way during loading/unloading. It also featured 'strap' rail along the deck. The wagon was Q 129. This wagon was also available for general narrow gauge rolling stock. Q wagons were numbered from 1 to 136. Service History: *Q 129.VA - 1/ 6/1926 NWS Built new H/brake & drop buffers. For traffic of Narrow Guage stock 31/ 1/1931 NWS Into Workshops - 16/ 6/1931 NWS Out of Workshops (50 days) 6/11/1931 NWS Into Workshops - 27/11/1931 NWS Out of Workshops (22 days) 24/ 8/1936 NWS Into Workshops - 10/ 9/1936 NWS Out of Workshops (18 days) 27/11/1936 NWS Into Workshops - 26/ 2/1937 NWS Out of Workshops (Light repairs) circa 1960 - Photograph SL20 p32, loaded with 7NA / /1975 - Photograph #393 / /1976 - Photograph #553, #554 19/ 3/1979 - Condemned - 10/ 4/1979 - Off Register - 10/ 4/1979 - Sold (to) ETR, Belgrave / /1989 EME Body [GRE]. [SXC]: 29/3/92, MEL127E5, Puffing Billy at station Historic - Victorian Railways - Transporter wagon used to carry and transfer 2' 6" Narrow gauge rolling stock over Victorian broad gauge (1,600 mm (5 ft 3 in) main lines to the narrow gauge lines. Q 129 was unique, it was built to transport narrow gauge locomotives. Transporter Wagon made of Steel and wrought Iron129Q129q, puffing billy, transporter wagon

Phoenix Foundry Plate - replica Made about 2010 cast off original from locomotive Y112 The Phoenix Foundry (1857-1906) fabricated iron and brass products - including engines and pumping gear for the mining industry, locomotives, steam rollers, water pipes, water gauges and diverse small items. Throughout its operation the business was located at premises on Armstrong Street, Ballarat . Background In 1852, at the age of thirty-three and after a year of operating his own engineering business at Williamstown, Lancashire-born blacksmith and engineer George Threlfall (1819-1897) arrived on the Sebastopol gold plain and immediately undertook blacksmith work repairing picks and tools for the miners. Little did he know that this fledgling business would be the genesis of the most iconic business of nineteenth-century Ballarat. At approximately thirty-nine years of age, English mechanical engineer Richard Carter (c1814-1883) came to Australia on board the Arrogant - arriving in Melbourne on 19 April 1853. He soon travelled to the Ballarat goldfields. Born in the year 1830 in Belfast (Ireland), mechanical engineer William Henry Shaw (1830-1896) arrived in Australia in October 1853. He worked briefly with George Threlfall at Sebastopol, then moved to Geelong to manage the small foundry of Frederick Moore. Twenty-four year old English-born iron moulder Robert Holden (c1831-?) left his home in Belfast (Ireland) in late 1854 and travelled from Liverpool to Melbourne on board the James Baines - arriving in February 1855. Afterwards he joined his brother-in-law William Henry Shaw in Ballarat. History Foundation to Incorporation In March 1857 George Threlfall joined in business with Richard Carter, William Henry Shaw and Robert Holden. They relocated Threlfall's successful engineering enterprise from Sebastopol to new premises in Armstrong Street, Ballarat. This business was then known variously as the Phoenix Iron Works Company, Phoenix Foundry or Messrs Carter and Co. By 15 April 1857 they were advertising that they were open for business as engineers, millwrights, boiler makers, smiths, iron founders and brass founders. In January 1858 George Threlfall left the partnership. Incorporation to 1889 1890 to Closing locomotive Y112 Builder: Phoenix Foundry, Ballarat Builder’s Number & Year: 238 of 1889 Designer: Kitson & Co Wheel Arrangement: 0-6-0 No. in class: 31 Entered Service: 24 July 1889 Taken off Register: 11 May 1961 The origins of the Victorian Railways Y-class lay with the decision by Kitson & Co, Leeds to place a 0-6-0 freight locomotive on display at the Centennial International Exhibition, Melbourne in 1888, together with a 2-4-2T suburban passenger locomotive. This marketing initiative proved successful as the Victorian Railways were clearly impressed with these machines, with both purchased after the exhibition and becoming the patterns for new standard locomotive types. Thirty examples of the 0-6-0 heavy freight design were ordered from the Phoenix Foundry, Ballarat, becoming the Y-class for main line heavy freight duties, while the 2-4-2T design became the E-class for Melbourne suburban passenger duties (represented by preserved locomotive E 236). The Y-class prove successful in service and accrued high mileages. They were inevitably superseded by more modern and powerful steam locomotives and a number cascaded into shunting and yard pilot duties, often with the addition of shunters steps along both locomotive and tender. Y 112 was one of the last in service when withdrawn in 1961. Fortunately it was saved for preservation and plinthed in central Ballarat, ostensibly in commemoration of Phoenix Foundry. I understand it is owned by the Sovereign Hill Museums Association. During the 1980’s, Y 112 was leased to Steamrail Victoria and restored to operation at an industrial site in Ballarat. Y 112 features an attractive lined apple green livery and has performed various rail tours around Victoria since restoration. It is normally based at the Steamrail depot in Ballarat East. Y 112 is the only 19th century design in operational condition in Victoria and as such is one of the oldest working steam locomotive in Victoria . Historic - Phoenix Foundry Plate - replica Made about 2010 cast off original from locomotive Y112Phoenix Foundry Plate Oval shaped plate with an image of a phoenix centered at the top with lettering surrounding it.Phoenix Foundry No 238 Ballarat Company Limited 1889.puffing billy, phoenix foundry, ballarat, locomotive y112, phoenix foundry plate - replica

2 NAL - Rinadeena - (Mt. Lyell) O 2; 2 NBL - 1st. class saloon car (20) NAL FIRST-CLASS SALOON CAR. Four saloon end-platform cars originally built during 1901–1902 by the Lancaster Railway Carriage and Wagon Company Ltd. for the 3'6" gauge Mt. Lyell Mining & Railway Company in Tasmania and classed O. Converted for use as second-class cars on the 2'6" gauge Puffing Billy Railway during 1965–1966, these cars were reclassified NBL and numbered 1–4. The L recognises their Mt. Lyell origin, No. 1 was kept for use as the Railway's VIP car and was reconditioned to a higher standard. No. 2 was similarly upgraded in 1985 for use on special occasions. In 1989 No. 3 was similarly reconditioned with No. 4 receiving similar treatment in 1995. These cars were re-classified NAL in recognition of their new first-class nature. The Mt Lyell Railway was closed in 1963 and subsequently dismantled, but fortunately several of the locomotives and carriages passed into preservation. Purchased by the Puffing Billy Preservation Society from the Mount Lyell Mining & Railway Company in the 1960's and converted to 2' 6" gauge. It has since given many years of service on the Puffing Billy Railway. TASMANIAN CARRIAGES & GUARDS VANS No. Builder Type Year built Ex. Location Note NAL 1 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Mt Lyell NAL 2 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Rinadeena NAL 3 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Teepookana NAL 4 Lancaster Railway Carriage and Wagon Co Saloon 1901 Mt Lyell Railway Named Dubbil BarrilThe Rinadeena is a stunning example of a classic narrow gauge 1st Class Saloon Carriage, used as a luxury edition to train travel in the late 1800s and the 2NAL within Puffing Billy's collection was purchased by the Puffing Billy Preservation Society in the 1960s, where it underwent restoration to become part of the railway's historic transport collection.A timber and iron saloon car - painted in crimson with a name plate 'Rinadeena' attached to the centre of the carriage and the words '2 NAL' painted in white directly below. The word 'FIRST' is painted in gold at both ends of the carriage. The car has nine windows on either side of the carriage and a wrought iron ballastrade upon entry at eiether end of the carriage as well as iron steps to ascend. Inside the carriage are 10 bench seats made of wood and leather and ten tables for dining. The windows are adorned with cream cloth fabric and above each bench are wrought iron luggae racks. The ceiling is covered in cloth and features two suspended ornate glass and metal light fixtures. A wooden door with two glass panels can be found at both ends of the carriage.2 NAL - Rinadeenarailway carriages, first class saloon, narrow gauge, rinadeena, mt lyell, transport, travel, leisure, luxury

1935 matriculation class. Taken outside the prefects pavilion. Back row: Hugh Vallance, Laurie Parker Centre row: Harry Hocking, Edmund Parsons, Eric McGrath, Keith Morna, Harry Spencer, Keith James, Bill S. Reynolds, Ronald Ross Front row: Jean Morris,Gwladys Murray, Thelma Hatch, Tassie Thomson, Margaret SmithBlack and white photograph mounted on board.williamstown high school, 1935, matriculation form

Mrs Mary Holden (1843 - 1930) was the mother of the Rev Albert Thomas Holden CBE V.D., B.A., D.D. Director of the Methodist Inland Missions, Chaplain-General of the A.I.F. and President-General of the Methodist Conference of Australasia. She was the mother-in-law of the Rev. Samuel HobanB & W composite photo of the Young Men's Class at Ashby Methodist Sunday School in Wellington Street, comprising 30 oval head and shoulders photos of the young men, and 1 rectangular head and shoulders photo of their teacher, Mrs T. Holden."Wellington Street Methodist Sunday School Young Men's Class. Presented to Mrs T. Holden as a slight token of esteem and respect from the members of her class. March 1908. P. Buchanan,N. Buchanan, L. Pash, T. Cortous, C. Walter, B. Palmer, S. Dorling, W. Hancock, N. Potter, E. Thomas, E. Potter, H. Reeves, R. McCann, H. Gallagher, P. Baxter, L. Viccars, F. Walker, F. Wynn, E. Whitton, J. Thomson, A. Sykes, W. Gallagher, G. Littleton, A. Wilson, N. Johnston, H. Viccars, H. Bell, C. Cortous, C. Bond, L. Muir, R. Thomson, H. Johnston.mary holden, rev albert thomas holden, rev samuel hoban, ashby methodist, sunday school

Note by T.H. Kneen 4 March 1992 , "Appears to be a class under instruction rather than a public pruning demonstration. Numbers are small and many are using secateurs. E.B. Littlejohn identifies the group as the Youth Employment Scheme which funded E.B.L.'s appointment to Burnley. "The Leader" ceased publication on 26 June 1957." Also see B91.168, B91.170. All the students are male. Black and white photograph. Groups of men pruning 2 fruit trees in the Orchard with the demonstrator standing on a ladder.pruning, secateurs, youth employment scheme, students outside class, male students, orchard, perc trevaskis

502 State School - Class Group c1930’sstawell education students

Sunshine High School existed in its own right from 1955 to 1991. During the early years the wearing of 'correct' uniforms was strictly enforced. Girls had to wear hats and boys had to wear caps as part of the uniform when outside the school grounds, or else they risked detention if caught without head wear by a Prefect. The boys therefore always had a rolled up cap in the back pocket to quickly slip on whenever there was danger of being nabbed by a Prefect. The girls had a winter uniform, which included thick beige stockings and a maroon blazer, and a summer frock in which they could be relatively cool during hot days. The boys had to wear their double breasted grey suits all year, with a jumper under the jacket in cold weather. The boys were supposedly being groomed as gentlemen, and so even during hot conditions were not allowed to remove their suit jackets in the class room. On about two very hot afternoons a year, the headmaster removed his jacket and so allowed the boys to do likewise. With single breasted suits becoming fashionable, it became difficult to find double breasted grey suits in the wide range of sizes required by students. In about late 1960 or early 1961 the uniform rules for boys were changed to enable them to wear single breasted grey suits. They still however were not allowed to remove their jackets in class on hot days. Over the years the rules for the wearing of uniforms were relaxed and in the late 1970's students were wearing either uniforms, or parts of uniforms, or their normal clothing. The wearing of uniforms at Sunshine High School eventually died out well before the School vacated the buildings on Ballarat Road, and amalgamated with other local secondary schools to form the Sunshine College.The three items of clothing, although not a complete uniform set, serve as a reminder of the summer and winter uniforms, as well as the colours, that were worn by the girls at Sunshine High School during the early years. The jumper is identical in appearance to that worn by the boys and so it is not difficult to imagine how a male Sunshine High School student would look like with a grey suit and that type of jumper.THREE ITEMS of girls uniform from the no longer existing SUNSHINE HIGH SCHOOL are individually displayed here. The items being: (1) Beige with maroon print cotton summer frock. (2) Maroon polyester/wool winter tunic. (3) Maroon V-necked wool/nylon jumper with light blue and gold coloured stripes around the cuffs and the neck.Ecole brand winter tunic. Buxwear brand summer frock of Style S289. M.G.Magree brand jumper.sunshine high school, uniform, frock, tunic, jumper, girls school uniform, maroon uniform

The Sunvale Primary School was situated on Neil Street, near Hertford Road, Sunshine, on the former Moons paddock. The school was officially opened on the 9th of October 1957 with an enrolment of 214 students. Most of the students were transferred from the overcrowded Sunshine, and Sunshine East Primary Schools. The acting head teacher and five temporary teachers came from the East Sunshine Primary School from which about 170 students also came. During the later years the school operated as part of a three campus primary school complex formed between Sunvale Primary School, Sunshine East Primary School, and Braybrook Primary School. After the modern Sunshine Harvester Primary School was built on the East Sunshine Primary School site, the students from the Braybrook and Sunvale schools were transferred there. Sunvale Primary School was closed on 9th September 2009.The magazine is a historical record of the initial 40 years of the school and of activities associated with the school. It contains the names of the Principals, from Mr. Bartels in 1957 to Mr. A. Dash in 1997, and also the names of Chairs of the School Council, from Mr. F. Sanford to Mr. T. Cuddy. It also features articles on the history of the school, the mothers club, the parents & friends members, special events & features, class & staff photographs, sport, and has a memories section. The special events & features section includes the school ball, camps, the Governor's visit in 1995, and Sunvale's famous Olympian staff member Pam Kilborn.Bright yellow covered 40 page book with green and white printing on the cover. A large emblem of the no longer existing SUNVALE PRIMARY SCHOOL is featured on the front cover, and a smaller version is on the back. The magazine is described as "A Scrap Book of Memories", and covers the years 1957 to 1997.SUNVALE Primary School S/PS HONOURS WITH HONOUR A Scrap Book of Memories 1957 - 1997sunvale, primary school, school magazine, scrap book of memories, moons paddock, 1957, 1997, bartels, dash, sanford, kilborn, cuddy

With more and more woolsheds being connected to power lines, the need for electric shearing gear markedly increased from the 1960s onwards. The greater economy made electric gear an attractive proposition to many graziers. Requiring only an electric shearing motor, for small and medium scale operations, electric shearing motors were a more economical way of shearing a wool clip. The other option for graziers was Overhead shearing gear, which also required an Engine to provide shared power to a row of shearing stations. Still working, this Sunbeam Electric Shearing Motor – Heavy Duty Model, features a slow speed motor totally enclosed for protection against dust and insects. The full bearing down tube is easily removed and stored to be out of the way when not in use (not pictured). Providing 0.5 hp, which is twice the power ever needed for shearing sheep, this buffer allows for fluctuations in voltages that can occur in rural districts. Inventor Frederick Wolseley made the world's first commercially successful power-shearing system in Australia in 1888. US company Cooper, which had been founded in 1843 as a maker of sheep dip, began selling Wolseley equipment in the USA in 1895. The Chicago Flexible Shaft Company successfully entered the power-shearing market a few years later and entered into a joint venture with Cooper. It set up a branch in Sydney and sold shearing sets, and engines to power them, into the Australian market. In 1921 the US parent company, realising it needed to make products whose sales were not as seasonal as those of shearing equipment, made its first household appliances and branded them Sunbeam. In 1933, changes in exchange rates and taxes led the company to manufacture engines and shearing equipment in Australia via subsidiary Cooper Engineering, which changed its name to Sunbeam in 1946. Although most Australians know of this company as a major manufacturer of household appliances, its rural division flourished and retained the Sunbeam name for shearing equipment even after it was taken over by New Zealand company Tru-Test in 2001. This 0.5 horsepower vertical brushed motor air-cooled engine was designed to drive a single shearing plant. From the central cylinder which features a yellow “Sunbeam” sticker, a grey 240v power lead can be found on the left-hand side. A blue capacitor is located next to this power lead. Below, two legs extend and meet to form a foot which is fastened to a wall. On the right-hand side of the engine, a specification plate is located on the central cylinder. A yellow directional arrow sticker is located on the rotating section of the engine below the specification plate (location for photography, this section is designed to rotate and hence this sticker is not fixed in this location). At the rear of the cylinder, a plastic cap with small air cut outs protects the air-cooled engine from contaminants. At the front of the engine, the location for securing the bearing down tube is located. On the right-hand side of the lock for the bearing down tube is the handle, to which a string is often attached for switching the motor on and off by a shearer bent at the waist (not pictured). Sticker. Gold writing. Front of shearing motor “Sunbeam” Plate. Inscribed. Side of shearing motor. “Sunbeam / SHEARING MOTOR / MADE IN AUSTRALIA / 0.5 H.P. / 220/240 V / 1 PHASE A.C. / 4.0 AMPS / 50 C/S. / CONT. RTG. / 1425 R.P.M. / CLASS A INSUL / NO. J244560 / TYPE: NSB5C2/49." sheep sheering, shearing equipment, sunbeam, electric shearing motor

Ford and McFarlane shearing handpiece c.1890. This shearing handpiece is from ‘Wellington Lodge” in Tailem Bend, South Australia. Wellington Lodge today is an Angus beef farm; however, the property has a long history which includes wool farming. Wellington Lodge has been in the McFarlane family since the 1840’s and was originally around 19000 acres. The donor, Brian Licence, assembled this handpiece out of spare parts he found while classing wool on the property in the 1960s. Brian showed the finished handpiece to the owners once his classing work was completed and was told he could keep the handpiece as a souvenir. Brian also classed wool at “Jockwar” and “Pleasant Park” in Penola for members of the McFarlane family during the 1960s. The handpiece is named after Ford, the name of the engineer who designed the handpiece and McFarlane, the owners of Wellington Lodge Station and employers of Ford. This handpiece was developed as a prototype for use on the property. The handpiece which is made of solid brass is in a “used condition” and has been patched with solder. The handpiece is stamped with the number 10. Internally, the handpiece is powered from a drive mechanism of compressed air, this compressed air was typically produced by burning mutton fat. The handpiece comes from the pre-electrical– steam engine era of shearing. Brass metal shearing handpiece. A three-pronged fitting to hold both the comb and the blade protrudes from one end. A cylindrical stem extends vertically from the other. This is likely where a connecting rod to the shearing plant would be found. Below this vertical stem, the handpiece has an additional threaded hose fitting. This is likely where compressed air was delivered into the handpiece. The inscriptions can be found on the rear, near the previously mentioned vertical stem. Around this stem is also where the repairs of solder can be found. These repairs are unique to this handpiece and are not common practise.Etched. Base of handle. “FORD & McFARLANE . SHEEP SHEARER . Etched. Base of handle. “10”sheep shearing, shearing equipment, ford & mcfarlane, wellington lodge, tailem bend, south australia, shearing handpiece, shearing

Photo depicts a final year woolclassing class from the Gordon Institute in Geelong. They have prepared a display re: woolclassing for the visit of the Prince of Wales to Geelong in 1920. They are on the top floor of the Dennys Lascelles woolstore. The donor's father, Mr Cyril Cameron, can be seen in the photo at sixth from the right. Cyril Cameron (known as 'Cam') came from the family property 'Burnside' near Glenthompson in the Western District. He joined Strachan & Co. as an office boy in Aug. 1914 and then joined the 8th Battalion, 1st AIF in January 1915. He returned to Australia in early 1920 and started work at Strachan's again. He did the wool classing course (one year, evening?) at the Gordon in 1920-21. He became Head Wool Valuer at Strachan's in 1938 and retired in 1970. His office at Strachan's was on the top floor, directly overlooking what is now the entrance to the National Wool Museum (formerly Dennys Lascelles woolstore). He died in 1983. Interestingly, within the photo, can be seen a poster on the wall advertising the RSS or Diggers' Mill. The mill opened in 1922 but had been advertising for investors since the end of the war.Photograph, Gordon Technical College wool classing course, 1920. Wool classing display for the visit of the Prince of Wales at the Dennys Lascelles wool store.GEOFFREY S. WOOD, PHOTO, GEELONG Dennys Lascelles Show Floor 1920 / Visit of Prince of Waleswoolclassing royal visits, gordon technical college - woolclassing department, cameron, mr cyril, dennys lascelles wool store, woolclassing, royal visits

Autobiography of Mavis Lucas Nee Pepperell. Ms Lucas grew up in Tunstall, now Nunawading and vividly describes her life from about 1920, growing up in a working class family on a flower farm, her career in a soft furnishing factory, social life based around her church, the depression, her Marriage in the 1930's and the changes during and after the war. She tells her story to 1954. Autobiography of Mavis Lucas Nee Pepperell. lucas, mavis, pepperell, wesley college junior school, tunstall, flower growing, pepperell family, blackburn primary school, no. 2923, mount pleasant methodist church, hawthorn, frank, ashburton, hartwell, julie, helen, yos, arie, heathmont post office and store

1888 school opened. 1890 children attend (50ft x 20ft room. 90 children, 3 teachers)1922 land purchased on Tirana St. site. 1930 brick building built for upper grades. 1950's timber rooms added, later burnt down. 1967 Junior classes to brick extension Tirana St. 2008 2 large learning spaces built.Sepia photograph of Mitcham school (Grade 7 and 8) taken outside in front of a plant covered wall. The photograph was taken in 1937. This is a class of 37 children. Teacher on the right.mitcham state school no 2094, class photo, 1937

Engraved wooden frame with sepia coloured photograph. H M A S Sydney was launched from Newcastle on Tyne on 22nd September 1934 in England. Sydney was commissioned into the Australian Navy in September 1935. H M A S Sydney was a modified "Leander" class Cruiser. Sydney was involved in offensive actions in the theatre of war. .

HMNZS was a Castle Class Anti - Submarine Minesweeper. Launched in October 1943 the ship was built from kauri timber on a steel frame. It was decommissioned in 1946 and later sold to the fishing industry.Ward room plaque to His Majesty"s New Zealand Ship Waikato.

Students identified. Keith Elliott, Fred Macfarlane, Geoff Sammons, Greg Amph;et, Ken Veale, Ray Keane, Greg Leonard, G Tepper, Cathy Arnold, R Cousland, S Murphy, D Haughton, Wendy Scurry, P Penry, John Holden, R Batchelor, R West, Greg McKiddin, J Stewart, Keith Watson.Blackburn South State School, class of 4A in 1957.blackburn south state school, #4035, 1957, grade 4a

Pupils identified. Greg Leonard, Geoff Sammons, Ken Veale, John Champion, G Tepper, John Holden, Greg McKibbin, L Wells, R Cousland, P Vallieu, Wendy Scurry, S Murphy, Cathy Arnold, P Penry, Billy Thompson, J Stewart, Keith Elliot, Keith Watson, Fred Macfarlane, R Batchelor, Blackburn South State School 1955. Class photo of 2A showing 49 students.blackburn south state school, 1955, class 2a