The model of a landing craft that has spacious front area that holds a ship and the back area has a cube with text "Sydney". The whole model is in greenish grey colour and the boat inside is in grey with yeallow robes on deck.SYDNEYmodel - combat ship, hmas sydney, lcm 6 landing craft

A long ship that has number 931 onside at the front and stand on 4 legs base. It has one autocannon at the front and two at the back and two small boats on sides931 USS Forrest Shermanmodel boat, uss forrest sherman

The long ship has one third of its length made of controlling room in the middle. It has on autocannon at the front and a machine gun station at the back and text '84' on side.84 USS ASHEVILLE (PGM-84) VIETNAM 1967/72model boat, uss asheville

The model has yellow cream deck on grey body and red bottom. It stands on greay base with texts "U.S. BATTLESHIP BB-62 NEW JERSEY". The ship has 3 turrets, 2 at the front, 1 at the back and a helicopter standing at the end.U.S. BATTLESHIP BB-62 NEW JERSEY LENGTH OVERALL 270.5m BEAM 32.95m DRAUGHT 116m DISPLACEMENT STANDARD 45000H DISPLACEMENT MAXIMUM 59000H POWER 212000HP SPEED 33KTmodel - combat ship, uss new jersey, uss forrest sherman

The Lady Nelson was the first decked ship to enter Western Port in 1801 under the command of Lt James Grant. She returned later in the year under the command of Murray. She carried a gig and a smaller tender, of which this is a model.The model ship and tender are as exact replications of the actual ship and boats as is possible to obtain through research, basic hull plans available and interpretation by the model builder.Model Lady Nelson ship modeltender - smaller life boat. Wood, cardboard. Three bench seats and stern seating. Clinker built. 3 sets rowlocks, no oars.lady nelson, model boat, david lumsden, churchill island, western port, port phillip bay

The HMS Lady Nelson was commissioned in 1799 to survey the coast of Australia. The initial exploration of the Bass Strait by Commander James Grant has long been believed to be the marker of the discovery of Churchill Island by Europeans and there have been tales that Commander Grant was the first European to set foot on the Island. While there is little proof of this, the photograph still serves to contextualise this event and show what the Lady Nelson looked like.Black and white photograph showing a ship with pennants and no sails. Ship is on the land, displayed by the side of the road. There is a series of low slung buildings in the background. Through preliminary research, it appears this is a replica model of the HMS Lady Nelson built in 1986 that is located at the Lady Nelson Visitor and Discovery Centre in Mt Gambier.Catalogue number in pencil on reverse. 'HMS Nelson' written on reverse in penchurchill island, lady nelson, ship, photograph

Dr Bernie Dunn spotted a model of the merchant ship 'Ulimaroa' at Pollywoodside Museum after which he commissioned Ib Odfeldt, a Danish prize winning marine artist, to depict the vessel at sea.The painting was later gifted to ANZCA in 2006. John Traill, co-owner of Huddart Parker Ltd, named the ship in 1907 after his family home 'Ulimaroa' the building which was later purchased by the newly established ANZCA. The S S Ulimaroa was one of the popular ships in the Huddart Parker fleet that was in regular service between Australia and New Zealand from 1908 to 1934. This service was interrupted by WWI when it was commissioned by the NZ Government to carry troops. During the depression it was de-commissioned where it lay in Sydney Harbor until 1934 when it sailed under its own steam to Japan to be converted into scrap metal. Oil on board painting of the merchant ship S S Ulimaroa on the Derwent River, Hobart, with landscape in distance and small steam boat on of main ship. Set in a plain gold and black wooden frame.[on frame in white ink] HUDDART PARKER LTD. / 1908 1934 / S/S ULIMAROA [on reverse in black ink] THIS PAINTING WAS COMMISSIONED / BY DR BERNARD L. DUNN & WIFE JEAN. / FOR THE ANZ COLLEGE OF ANESTHETIST 2006 ("ULIMAROA" ST KILDA RD MELBOURNE ) / TITLE: ULIMAROA ON THE DERWENT RIVER, (TASMANIA) / ARTIST IB ODFELDT / MEDIUM: OIL ON BOARD 2006 / THE SMALL STEAMER IN THE BACKGROUND S/S WARRENTINA / 808 CYGNET COAST RD / PETCHEY'S BAY 7109 TAS. / RED STAMP dunn, bernard, ulimaroa, odfeldt, ib, parker, huddart, traill, john

Clarkat A Clarkat Aircraft Tug that has been converted to run on Rails, This Clarkat 'B' was one of 11 machines shipped on 13 April 1943 to the Lathrop Holding & Re-consignment Depot in Lathrop, California. and was used at Jack's Magazine, Maibyrnong, Victoria and later on at Coal Creek Historical Village, Gippsland, Victoria. Clarkat Tug Model C S/N Cx30F Made by Clark Tructractor Div of Clark Equipment Co Battle Creek Michigan U.S.A Serial No. CK 43 470 Code: Heavy Des.Pat. 116092 Historic - Industrial Narrow gauge railway equipment - Jack's Magazine, Maribyrnong, Victoria, Australia Clarkat Aircraft Tug that has been converted to run on Rails, made of steel Coal Creek Tug Clarkat Serial No. CK 43 470 Code: Heavy Des.Pat. 116092 clarkat, clarkat aircraft tug, puffing billy, jack's magazine

Made by unknown POW for a guard Cpl. McGlade probably in Camp 13.Model of white hulled, four masted sailing ship in a bottle.italian pow, ornaments, corporal mcglade, murchison camp 13, garrison guards

BIARRI had an annual day where an antique dealer valued items brought in by the public.Six colour photographs 7142 Models of Sailing Ships 7142-1 Two men seated holding an item. 7142-2 A man with magnifying glass examining a necklace with a woman standing. 7142-3 Two people a woman to the right with a man next to her. 7142-4 Seven people four seated on one side of a table, three standing on the other side.biarri

Colin Garth spoke to Rotary Club of Lakes Entrance about his plans- in March 1998, to build replica of S S GippslandColour photograph showing model of S S Gippsland at Lakes Entrance Rotary Club , Lakes Entrance, Victoriaships and shipping, waterways, topography

The Ferranti Sirius is an electronic second-generation transistor computer and is one of three remaining examples of this machine left in the world. It was an important addition to the computing facilities at Monash University in the early 1960s and provided access for computer programming and research for many early computer professionals, academics and teachers. The Ferranti Sirius computer was built in a period of rapid growth in computing technology. The first stored program computers appeared in the late 1940s and used individual designs with valve technology. By the mid-1950s valve technology was replaced by transistors and the first mass produced commercial computers became available. The Ferranti Sirius was announced in 1959 and offered a “small” academic computer. It was designed and built by the English company Ferranti Ltd and sold through a local office of the company in Melbourne. The Sirius was manufactured at the Ferranti Ltd.’s West Gorton, England factory from 1959 to 1963 and, in all, the company produced probably 22 installations although only 16 were actually recorded as sold; this included one at Ferranti’s Bureau in London and one at Ferranti’s Melbourne Bureau. Only 7 were exported and 4 of these 7 were located in Melbourne, Australia. All four were associated with computing at Monash University – the Sirius in the MMoCH collection was purchased by Monash University in 1962, a smaller Ferranti Sirius was used on the Caulfield campus (prior to amalgamation with Monash University) from 1963, the Ferranti company had its own Ferranti Sirius initially temporarily installed at Clayton campus in 1962 and then placed in their office in Queens Road, Melbourne. A fourth computer was purchased by ICIANZ (now Orica) in 1962 and was transferred to Clayton campus in 1967. Only two of these Melbourne examples have survived; one in the MMoCH collection and one at Museums Victoria. There is an example of the Ferranti Sirius in the Science Museum Group collection in the UK as well. The Ferranti Sirius in the MMoCH collection was the first computer purchased by Monash University and it was shipped to Australia to be installed by November 1962. The University had a similar model computer on loan from Ferranti Ltd during the first part of the year and it was returned to the office of the company in Queens Road, Melbourne once the University’s own machine was installed. The computer was placed on site at Clayton campus, Monash University. The computer operated from 1962 until 1972 when it was officially decommissioned. The Ferranti Sirius was sold to Mr Paul Stewart in late 1974 and removed from Monash University. Mr Stewart later donated the computer back to the University in 1988 and it was transferred to the collection of the Monash Museum of Computing History after 2001. The Ferranti Sirius is an electronic second-generation transistor computer and is one of three remaining examples of this machine left in the world. It was an important addition to the computing facilities at Monash University in the early 1960s and provided access for computer programming and research for many early computer professionals, academics and teachers. The Ferranti Sirius is of scientific (technological) significance as one of the early transistor digital computers that transitioned computing from first-generation valve computers to second generation commercial installations. This example of the Sirius is of historical significance in its role as a part of the Computer Centre, Clayton campus, Monash University which provided computing facilities in Melbourne in the early 1960s when there were few installations available for academic, administrative and commercial users. Staff and students were able to undertake investigative research and learn programming techniques. The Computer Centre encouraged the use of the computer across all disciplines and this provided the base to establish computer science as a subject offering and, later, a new department in the University. This growth in computer education eventually culminated in the establishment of the Faculty of Information Technology, Monash University. The Ferranti Sirius in the collection at Monash Museum of Computing History has a main unit with a CPU and memory combined with input/output equipment and one extra cabinet of memory. The Central Processing Unit is a floor-standing unit which contains the computer circuits, power supplies and has a decimal digit display panel and a normal clock. A moveable control panel is placed in front of the Unit (Currently set on a recreated desk/filing cabinet support in the display). The Sirius base unit uses acoustic delay line memory with 1000 word store. An additional 3000 word memory cabinet is set adjacent to the CPU and can be connected to increase the memory. The computer is supported by a range of input/output devices. There is a Ferranti Paper tape reader, located on desk in front of CPU. Red label on front “Ferranti tape reader. Type TR 5. Serial No. 477”. Adjacent to the CPU is a set of Simplified tape editing equipment in three pieces which includes a (1) Table unit with switches on front face. Metal tag on reverse reads “Creed & Co. Model No. S4060. Serial No. 1457. Original Customers Marking GRP7 V706”. The table has a numbered internal tag “Table Serial No. 198579. (2)Creed teletype set on table unit. Metal tag on reverse “Creed & Co. Model No. 75RPR K4M4. Serial No. 5897 Made in England”. (3)Creed paper tape reader set on table unit. This set of equipment could read paper tape and print it, or copy paper tape while allowing it to be edited, or allow a programmer or data preparation person to type and punch a new program or data. It has no electrical connection to the computer. Paper tapes were usually torn off and carried across to the computer. There is also another table unit with switches on front face and changeable setting switch on front right side which holds a Ferranti Westrex paper tape punch set. Label on reverse “Teletype Code BRPE11” This was the Computer’s only output device. BRPE-11 is a teletype model number.

SS Pioneer was a steam dredging ship which was in service with the Department of Ports & Harbours, Melbourne, Australia, from 1905 to 1950. The Pioneer (aka SS Pioneer) was a steel steam driven pump driven sand dredge. She was built in Glasgow, Scotland for the Victorian Dept of Board of Works in 1905. The Pioneer was scuttled on 9 March 1950.Half model of suction dredge Pioneer in glass display casemodel, sand dredger, ss pioneer, port of melbourne

The Australian pilot vessel and steam yacht Alvina had a long and varied career. It was built in the UK as a private yacht, 1891 and in 1903 came to Australia to commence in the pilot service at Port Phillip Heads. This model of the pilot ship is held by the nearby Queenscliff Maritime Museum in Victoria. In 1923 the larger Akuna took over from the Alvina, which then served as an excursion steamer and ferry in Westernport Bay for another 10 years when in 1933 it was replaced by an ex-Sydney vehicular ferry displaced by the new Harbour Bridge. Alvina was not scrapped until 1961. DSC_0046In 1901 the pilots took delivery of their first steam-powered pilot cutter, “Victoria”, 46 metres in length, built at Williamstown. “Victoria” was followed by “Alvina”, “Akuna”, “Akuna II” and in 1953, “Wyuna”, a twin-screw diesel electric pilot cutter 63 metres in length. “Wyuna” served until November 1979 and was then sold to the new Australian Maritime College at Launceston, Tasmania for use as a training ship.Model of the Pilot vessel 'Alvina in glass casepilot service, pilot vessel 'alvina', mr a g woodley

A portable radio receiver and VHF transmitter used by the Sea Pilot Service. An early model used from about 1956 for ship-to-ship and ship-to-shore communication during arrival and departure procedures.Used by the Port Phillip Pilot service in the 1950sMiniphone radio receiver / transmitter and carry bag MFD by Commonwealth Electronics Pty Ltd Type No 180TRN Serial No 184communication, radio receiver and transmitter

The first metal working machine used by David & James Thompson in 1878. Brought by ship by David Thompson who used it on the journey to make working models.The first machine used by David & James Thompson in their engineering section.Treadle lath for metal turning. Some brass accessories for metal working are laid out on a timber bench attached to the back of the lathe. Painted gunmetal grey and mounted on a black wooden platform for display purposes.Nonemachinery; tools; metalwork

Annual report on activities and financial performance of Kelaston, including the transition in funding model, launch of the Centenary Appeal to raise $1M to rebuild Kelaston, a staff team won the Ekiden Relay around Lake Wendouree, new service opened in Warracknabeal, long time committee member David Baird received an OAM, four residents enjoyed a holiday to Tye Estate at Romsey, two residents sailed on the tall ship 'Alma Doepel, two bantam hens and one rooster to the existing Cam and Sam cats as pet therapy, National Centre for Ageing and Sensory Loss chose Kelaston to be the location for it's training video, development of a attendant button when in the lounge of an evening when there is less staff, companion visiting program has begun, a Kelaston team won the Victorian A Grade Blind Bias Bowls in regional and state finals, and 'Keloca' Day centre in Avoca officially opened by Hon Rob Knowles, Minister for Aged care and Housing.1 printed volume with illustrationskelaston home (ballarat), association for the blind, corporation records

Made of canvas and bamboo slats with hemp ropes, adjustable canvas straps and metal buckles and rings, the rescue stretcher was used for carrying an injured person. According to the Powerhouse Museum, the stretcher and was ‘designed to support and carry an injured person in circumstances where the person has to be lifted vertically’. Known as the ‘Neil Robertson stretcher’, it was developed in the early 1900s by John Neil Robertson as a lightweight rescue device and was modelled on Japanese bamboo litters. An identical stretcher is held in Sydney’s Powerhouse Museum and is thought to date between c.1967 and 1999. The museum’s statement of significance for the unique stretcher elaborates on its cultural values: The canvas is wrapped around the patient and secured with strong canvas straps. A lifting rope is attached to a ring above the patient's head, while a guideline is tied near the ankles and used to stop the stretcher swaying as it is hoisted up. This style of stretcher was specifically designed for use on ships, where casualties might have to be lifted from engine-room spaces, holds and other compartments with access hatches too small for ordinary stretchers. The original name of the Neil Robertson stretcher was 'Hammock for hoisting wounded men from stokeholds and for use in ships whose ash hoists are 2 ft. 6 in. diameter'. Since those times the Neil Robertson stretcher has also been used in factories and mines and for other emergency rescue situations. It is still possible to buy this type of stretcher although the slats are now more likely to be made of wood. The example in the Powerhouse collection was amongst several items of obsolete first aid and rescue equipment donated by the electricity generation company Delta Electricity. It would have been used - or at least been on stand-by - at the company's Munmorah Power Station or the associated coal mine on the Central Coast of New South Wales. Industrial sites and mines are extremely dangerous work places. Throughout the 20th century to the present there has been a drive, especially in developed countries like Australia, to improve workplace safety. Measures taken to reduce injuries and deaths have included safer industrial equipment, safer work practices, staff training, and the ready availability of accident and emergency equipment.It was also used throughout WWI and WWII. There are two other examples of the stretcher are known in Parks Victoria heritage collections. Canvas and bamboo stretcher with straps and buckles. Hemp ropes are attached to the stretcher.

Model of HMS Kashmir built by Shipwright Charles Axiak. He originally trained and worked in British dockyards during WW2. Emigrated to Australia in 1955 and finished working in Williamstown dockyards building the River Class Destroyers K Class Destroyers built in UK in 1930's.1. Model of K-class Destroyer UK. Grey in colour above water line and brown below water line with black stripe dividing. Model has complete details of deck, guns and screws. 2. Wooden stand tailor made to hold the model of the ship. Brown in colour with long flat board. Small individual pieces of wood glued to the top to form the cradle for the boat. Also 4 felt footings at bottom of cradle.G.12 painted on side.ships model, hms kashmir

History of the PribislawThe two timbers on display are salvaged from the wreck of the ship 'Pribislaw' which transported the Ziebell family and the other Westgarthtown settlers from Germany to Australia. The model of the 'Pribislaw' was handmade by Geoffrey Borrack, a Ziebell family descendantFree-standing display board containing diorama in centre of shipwrecked Pribislaw. Information given of the ship itself. Attached to the bottom are 2 wooden sections of the Pribislaw ship with brass nails. Wooden sections have been fitted to a wood stand for display purposes.As per photomaritime technology, ship relics, information, board, drawings, documents, pribislaw, 1849, 1850, german migration, ship

The wooden pattern is part of a set that are stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century. Pattern; rectangular wooden block made from laminated sections of wood painted black. A half-cylinder shape was carved into the long side, and a dowel shape was placed at the lower side. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912

The wooden pattern is part of a set that are stored in a strong wooden crate. It was used at Briggs’ Brass Foundry for making sand casts. The traditional craft of sand casting is over 2000 years old. The handcrafted process produces brass and copper alloy goods that are well suited to marine use; bells, boat hooks, cowls, propellers, handles, lids, rowlocks, hooks, letters, bolts, rail holders, brackets, deck plates, flanges, rudder guides, portholes and covers. Briggs’ Bronze mixture is a copper-based alloy made from local ingots of copper, tin, zinc and lead in carefully measured quantities. The finished product is non-ferrous and can last indefinitely. The crate of patterns was donated by the Briggs family in the early years of Flagstaff Hill, along with other related items such as brassware, tools and machinery. The donated items were displayed in a simulated Brass Foundry in the Village along with other working crafts, trades and services found in a Maritime town. The items were on show from the completion of the building in 1986 until 1994 when the building was repurposed. The patterns represent the trades of foundering and metalwork, both supporting maritime industries such as shipwrights and boatbuilders. Farmers, manufacturers and other local industries also needed the castings made by foundries. The Brass Foundry included a historic Cornish chimney set up as a working model, to tell the story of smelted metal heated in furnaces then be poured into the sand moulds. This chimney was made from specially curved bricks and is now about two-thirds of its full height when originally located at the Grassmere Cheese factory. The craft of sand-casting from carved wooden patterns to create metal is an example of skills from the past that are still used today. The foundry pattern set is significant for its association with brass foundries locally and generally in coastal areas of Victoria. Marine industries such as ship and boat building rely on good quality castings for their machinery, equipment and fittings. Briggs Brass was especially formulated using non-ferrous metals to ensure their longevity. The patterns are associated with the long-running firm Briggs Brass Foundry that specialised in cast goods for the marine industry, ready to supply the needs for once-off or mass-produced items. Their products would have been fitted to sail and steam vessels along coastal Victoria including Warrnambool. Briggs Marine was also a bell-founder specialist and is also associated with the Schomberg Bell at Flagstaff Hill, having restored it to is former state as a fine example of the bell from a luxury migrant vessel from the mid-19th century. Pattern; pair of U-shaped carved blocks, unpainted. The blocks have opposing metal pins and holes to hold them together. One block has a disc shape carved into the base. The pattern is part of a set of foundry patterns from Briggs Brass Foundry.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, briggs' bronze, traditional method, trade, sand cast, cast, brass alloy, copper alloy, pattern, mould, foundry, brass foundry, metal foundry, casting, sand mould, sand casting, marine equipment, marine tools, marine fittings, copper tin zinc lead, non-ferrous, non-corrosive, brassware, metalware, foundering, metalwork, maritime, bell founders, ship chandlers, marine products, biggs, briggs family, herbert harrison briggs, h h briggs, george edward briggs, cyril falkiner mckinnon briggs, cyril briggs, briggs & son brass foundry, h h briggs & sons foundry, briggs marine, alliance casting & engineering solutions, grassmere cheese factory, cornish chimney, curved bricks, collingwood, moorabbin, collingwood foundry, moorabbin foundry, 1912