Black and white photograph of Ballarat SEC No. 21 decorated for the 1968 Myers Christmas Tram. Photographed at the depot by Bob Prentice, 16/11/1968. Tram has been decorated as a "show boat" with a paddle wheel, waves and the side windows covered to resemble port holes. Destination box has been covered with the words "To Myers". Tram has a roof advertisement "Myers for Everything under the tree". Theme: Santa's Showboat. Photographed with Lake Wendouree and the toilet block in the background. See Date advised by Alan Bradley, 15/3/03On rear in blue ink "No. 21 at Ballarat Depot / Saturday 16th November 1968 / Photo - Bob Prentice for T.M.S.V. archives" and in red felt tip pen in centre of photo "Page 1"trams, tramways, myers, decorated trams, depot, christmas trams, tram 21

Set of three newspaper clippings pasted onto a single sheet of paper with two Punch holes on the left hand side. First clipping from The Courier, Ballarat, 2/4/1971 with photo of tram 28 after is collision the previous day with a semi-trailer at the intersection of Princes and Victoria Streets. Gives names of the vehicle drivers and cost of the damage. Photo is of the tram returning to the depot under its own power. Tram passenger named as Margaret Foley, tram driven by James Mason and the truck driven by Gerald Winter of Gordon. See Reg Item 672.1 for a print of the Courier Photograph. Second is from The Courier, Ballarat, 15/4/1971 of the Brown Hill Progress Association chartering a tram to create interest in the project for the retention of Ballarat's trams. The tram was to leave Drummond and Sturt St. intersection the following Sunday at 1245. Item mentions the election of an interim executive and expression of interest of people outside the city. Third is from The Sun, Melbourne, 31/5/1971 about Ballarat 'tram-lovers' deciding to have a working tramway museum. Quotes Mr. Paul Nicholson, a member of the Ballarat Tramway Preservation Society. Notes that Museum will have eight trams using two miles of existing track around Lake Wendouree. Also notes that the SEC had received 88 applications for the 44 trams in both Ballarat and Bendigo.Image of the 3rd item added 28/3/2011 - see i1 and for the actual cutting i4. Original of newspaper of item 1 - also has items about the future of the railway workshops following a cost review and a story of page 1 of a submission to the Victorian Land Transport enquiry.In red ink on first cutting in top left hand corner "2/4/71" and in blue ink in top right hand corner on second cutting "15/4/71".trams, tramways, accidents, closure, charters, museum establishment

831.1 - Aluminium plate cut and stamped with the letters and words "467026 1 / BALLARAT TRAMWAY SO / BALLARAT VIC". Used by the BTPS/BTM in the ANZ Bankcard machine as the ID plate from the late 1970's to July 1998, when replaced by the Commonwealth Bank Machine. Plate salvaged for archive storage. Has two holes and cut outs for location onto machine. 831.2 - Plastic card -with words " ANZ BANK / MERCHANT SUMMARY CARD / CREDIT CARDS" and embossed onto cards is "561057 3011 467026 1 / BALLARAT TRAMWAY SOC / BALLARAT VIC". Words ANZ in the ANZ blue style of the time, rest black printing on white card. 831.3 - Envelope that contained item 831.2 - white envelope used by the BTPS at the time, mid 1970's with handwriting in black ink "Society Bank Card / For Claiming on / To be kept in safe at all times" Envelope has the words in green ink "BALLARAT TRAMWAY PREERVATION SOCIETY LIMITED / BOX 632, P.O., BALLARAT, VICTORIA, 3350 / A voluntary organisation operating the / BALLARAT TOURIST TRAWAY / Botanic Gardens, Ballarat". Envelope printed by Milldean Press.See 831.3tramways, trams, bankcard, btps, stationery, sales

Stamped enamelled round brass piece with a hole stamped at the top and ring placed through. Used as a SEC tramways employees pass. Has the SEC logo in the centre, organisational name (State Electricity Commission of Victoria) in white enamelled and outer ring the words "Electricity Supply Department, Provincial Tramways". This was in blue enamel. On rear stamped the number "127" Was issued to Mr. Adam Balloch, carpenter with the SEC depot. Had a piece at the top of the badge for the ring to pass through, but this has been damaged and transferred onto the badge proper.tramways, trams, employees pass, tickets, provincial tramways, badges

2225.1 Title sheet to the "Rolling stock roster" section of a scrap book titled "Ballarat Tramways", dated 1971. Lettered in blue ball point pen and underlined in red. 2225.2 - Section titled "Single Tramcar' (Single truck trams) and detailing the use, number and where the tram was taken to, or disposed to from Ballarat following closure. Lists 16 tramcars. Trams 31 and 32 were shown as SEC Creswick Road. 31 - later to (Kaniva > Haddon > USA). Lettered in blue ink or pencil with red lining. 32 - Maryborough, then to BTM Collection. 2225.3 - Section titled "Bogie Tramcar' and detailing the use, number and where the tram was taken to, or disposed to from Ballarat following closure. Lists 10 tramcars. Lettered in blue ink or pencil with red lining. Note a number of the bogie trams have since relocated since the list was prepared. All on a quarto size lined paper with 5 holes on the left side. From the scrap book containing a large group of newspaper cuttings from John Bainbridge, 7/4/02. Assumed prepared by John Bainbridge. scrap book, lists, rolling stock

Australian Tramway Employees Association (Tramways Union) badge. Badge made on a steel/ silver backing with words "Australian Tramway Employees Association" on outer edge of badge with a royal blue enamel background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. Has a steel ring through a hole in the top of the badge. On back of badge has stamped into the badge "V1 / 5947", possibly indicating state of Victoria and badge number. On the base of the badge has words "Wittenbach & Co. / STSIL" cast into the badge. See image files for front and back of badge. Not known when made or used.tramways, trams, unions, badges, atea, employees

One of a group of signs that were fitted into tramcars in Ballarat, giving instructions to passengers about prams, behaviour, smoking, fare payment, talking to the motorman, instructions or information to drivers etc. Yields information about the sign manufacture, demonstrates the type of signs provided in tramcars.Enamel sign, blue capital letters and lines on white background, titled "Smoking on Rear Platform Only". One of a number similar signs donated to the Ballarat Tramway Preservation Society by the SEC following closure of the Ballarat Tramways system in 1971. Sign has a black enamel backing, with marks from the enamelling process. Removed from trams by the BTPS when smoking deemed unhealthy or came from SEC stores. Sign has two central screw holes at either end. .1 - as for above, but black capital letters - added 31/12/2010.trams, tramways, signs, smoking, tramcars

Yields information about the track maintenance activities of the track gang in Ballarat, the work they did, notes, names and other information.Collins Australian Diary, No. 324 printed by Collins Bros, dark blue card covers, sewn sections with ruled sheets providing a diary for 1971, one week per double page. Has "useful information" sheets at from the diary. Used by the SEC Ballarat track gang to record their daily work, leave, welding, track cleaning, truck driver etc. Names of gang often mentioned in the diary undertaking specific jobs and when on leave. Last day work recorded - 24/9/1072. Loose contents Inside front cover Workshop requisition to fill pot holes and note re rail requirements for Daylesford and Hamilton. Clip to page with metal paper clip. 29/8/1971 - note re account numbers and on rear of a pink requisition form - work list for gang. 12/9/1971 - Workshop Requisition form - green dated 6/5/1971 Inside rear cover Circular for a Male Cleaner in Traralgon Workshop Requisition for work at the Zone substation - Ballarat South Circular to authorised drivers re used of defective vehicles. Has W. Vermeend name typed in top left hand corner. SEC Long Service Regulations circular - has name D.Wiseman handwritten in top right hand corner. 5 sheets of blue carbon paper.tram, trams, sec, ballarat, depot, trackwork

3054 - Printed form titled "Daily Traffic Revenue Statement" of the SEC, Electricity Supply Department, Provincial Tramways, on off white heavy duty paper. Gives value of tickets up to 15c, , scholar and parcel tickets, special trams, value of tickets issues, cash paid in by conductor, value of tickets collected, surplus or deficiency and hospital vouchers and Outfit number of either side of the form. Has space for branch, as at date, with signatures of Compiler. Form has number TRM 583-1 (OP109) , with two large holes on left hand side for holding or filing into accounts books. Form ruled in blue ink horizontally and red ink vertically with some horizontal lines. A similar form, printed only in black, without the holes also donated by Peter Watt. Has fare values up to 18c. Layout of form identical. This form has been imaged (i2) and passed onto to Bendigo Tramways.trams, tramways, tickets, accounting, conductors

Has a strong association with John Prisk, ESCo tram driver of the 1910's and demonstrates the importance of being a union member at the time and the badge provided by the unionAustralian Tramway Employees Association (Tramways Union) badge. Badge made on a brass or metal backing with a gold (9ct) plating with words "Australian Tramway Employees Association" on outer edge of badge with a royal blue enamel background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. Has a steel ring through a hole in the top of the badge. On back of badge has stamped into the badge "John Prisk / Member / Since 1912". On the base of the badge has words "APFX 9ct" stamped into the bottom of the badge. See image files for front and back of badge. See worksheets in Reg. Item 3140 for details about Jack and his SEC driving career.tramways, trams, sec, drivers, esco, unions, badges, aeta, employees

Pre printed clothing issue docket or form on light weight card for issuing of uniform to tram crews. Form printed for the TB, Form No. 3/516C. Overstamped "SEC" in large red print. Issued to D Chambers, No. 9 of Ballarat, for a tunic. Has Purchase Order numbers and other information written on the document. Issued c 1970? Has a number of staple holes through the card. Colour copy made for display cabinet - 20-07-2011.On rear in blue ink "Barbara"tram, trams, mmtb, clothing, uniforms, sec

Demonstrates uniform cap manufacture for possibility a SEC Inspector.A used - SEC? Inspectors/Conductors cap - black cloth exterior, with a blue band on the edge red cotton interior lining, brown leather internal hat band, black plastic peak on the outside, green fabric on the inside. Note no holes in the side of the cap for the SEC cap band, but there are two holes in the top peak for a number or a badge. May not be an SEC cap, but the black decorative binding is the same as in the SEC Inspectors cap. There is the remnants of a manufacturers stamp on the inside red lining. tramways, trams, ballarat, uniforms, cap, inspectors

The cardigans were knitted by Gavan Deppeler's Grandmother for her husband in the 1930's. They were a farming family.Two hand knitted striped cardigans (2441.1, 2441.2). 1930's. One is dark green and grey stripes, The other is pale blue and grey stripes. Each is a slightly different pattern of narrow stripes with V- neckline and grey buttons down front. They have been well worn with some wear and holes.farming history, cardigans, hand made

A rectangular metal sign painted dark blue with white writing and a white line around the edge which has a quarter circle indentation on each corner. The writing is all in capital letters and states DO NOT SPIT ON FOOTPATHS PENALTY £5. the reverse of the sign is identical. The sign is 30.5 centimetres long and 15.5 centimetres wide. It has a four centimetre by 15,5 centimetre piece at right angles on the end which has three holes in it for mounting. signs, public health

A wad punch is a tool to punch circular holes in soft material.\.Four wad punches made from metal. Two are probably hand made and two machine made. One is painted blue. wad punch, tools

Two glass tubes and a vulcanite pipe possibly part of an enema kit. Also included a thin oval shaped plastic band with a hole in the middle. These items are inside an Ingram's perfex enema box. The box is blue with white writing. Aileen and John Ellison Collection.medical, enema

Roselia Isabell Welch was an actress born 16 November 1838, probably in England. Father John Murrell Welch, mother Angela Towsey. Dress has been worn by her descendants.|This decorative day dress was worn by Roselia Welch to the 1872 Melbourne Cup. Roselia made her Cup Day dress by hand - she may have used a published dress pattern but her skill as a needlewoman is evident as the entire surface is decorated with narrow hand beaded black braid applied in a fern-like motif over the blue cotton fabric of the dress creating a lace-like effect.Dress worn by Roselia Isabel Welch to the 1872 Melbourne Cup. White lining inside dress, blue lining inside train. V neck, front hook and eye opening. Handmade hook holes down centre front. Set in sleeves with black piped armhole seams. Fitted bodice with black piped seams Flat front skirt, full bustle area at back with centre back opening. Floor length train. Blue printed label on lining of centre back panel, right side. Upper case letters 'SUP' visible. Brown tape at waist with hook. Two pairs of tapes either side of back opening for bustle. Black lace around neck, sleeve, train and back opening edges. Black cotton loop in centre of train. Inset pockets right side at hip level and very small one left side at waist level. Entire surface of dress decorated with black braid hand stitched in a fern-like pattern.

The Kew Historical Society’s collection includes a wide range of leisure objects. Many of the items are European-made, generally of British origin, however there are a number that were made for the Australian market by Australian manufacturers. There were clearly a huge range of toys produced for the Australian and International children’s market in the Nineteenth and Twentieth centuries. The examples of toys in the collection include examples of alphabet toys, arcade toys, baby toys, construction toys, dolls, doll accessories, educational toys, soft toys, tin toys, toy animals, toy blocks, toy machines, toy typewriters, etc. Red Plastic Magic Ball with a hole on one side to conceal the hidden piece of blue fabric.magic ball, illusional tricks

In 1984 the Scottish the Scottish Australian Heritage Council held a national competition to design an Australian tartan. The winner, Melbourne architect John Reid, designed a tartan using the colours of the Australian landscape: ochre, terracotta, black, white and cobalt blue. These were superimposed on the pattern of the Macquarie tartan sett, appropriately, as Lachlan Macquarie was the first Scottish and civil governer of the of Australia, from 1810 to 1821. In 1996 a vest was designed and made using the Australian tartan, as a uniform for the National Wool Museum's honorary staff. Name tags are inserted into the upper left button hole.National Wool Museum vest worn by honorary staff.SMALLtextile design, national wool museum, tartan

Physician blankets were manufactured by Collins Bros Pty Ltd, established 1874.Fourteen page booklet with blue printed text held with one staple at the binding. Front and back cover has blue, pink and yellow graphics and text, including a lamb wearing a stethoscope. There is a hole punched in the top left corner. Printed: THE CARE OF A / "Physician" / Chill Proof / BLANKET / YOURS, FOR LASTING SERVICE AND SATISFACTIONblankets, physician, collins bros mill pty ltd, manufacturing, geelong, wool, advertising

Also known as Peg solitaire or Brainvita, this one player game was a favourite in the court of Louis XIV. This board is based on the English design with peg holes in the shape of a cross. European boards are circular with peg holes placed to the edge. Regardless of shape, the game is played the same. Pegs are placed in the board, leaving an empty spot in the middle. Using this space, a player must move any peg left, right, up or down over an adjacent peg, thereby landing in the space and removing the peg that has been passed over. Pegs are progressively moved (and removed) from the board until the single remaining peg is placed in central spot initially left vacant. RNIB Catalogue no: 9197. 1 wooden board in blue box 32 black pegs, 1 green peg and 1 printed/Braille booklet. recreation, games

Female white Port Fairy Bowl's Hat with navy band and silver and blue badge.Headband - Navy blue with 4 air holes and "Port Fairy" embroidered in white Badge - LBA VICTORIA with foliagejanwilley, bowls, port fairy, bowling club

Mr. John Rossiter is the Minister of Health of Victoria. The RDNS Sisters are wearing their uniforms of grey dresses, red cardigans and grey peaked hats. The RDNS badge on their hats are made of metal with a royal blue circle containing the letters "Royal District Nursing Service". The inner section is divided in three parts; the upper and lower sections are silver and the centre section has the capital letters RDNS written in royal blue across it.Black and white photograph showing seven Royal District Nursing (RDNS) Sisters, four only partially seen, walking along a footpath with Mr. John Rossiter. Mr. Rossiter, who is in the centre of the photograph and group, has balding dark hair and is wearing a white shirt, striped tie, and a dark striped suit with a white flower in the button hole on his left lapel; a corner of a white handkerchief is seen in the left pocket of his jacket. The full view of three RDNS Sisters can be seen wearing their uniforms of a grey frock and dark cardigan and grey peaked hats with a round badge in the centre. In the background are some cars on the road, lamp posts and some trees. A white fence and a brick house with a tiled pitched roof is seen in the right hand side background.Photographers stamp. Quote No. KG 48royal district nursing service, rdns, rdns uniform, mr john rossiter

Light blue woollen beret with black synthetic binding around rim, attached to black cotton lining. United Nations badge is attached to front of beret in gold and white enamel, held in place with pin; badge depicts the globe surrounded by branches of an olive tree. Interior lining has diamond-shaped manufacturer's label stitched on. Beret has two black eyelet holes on wearers' right side. Interior label reads "HILLS/NEW-ZEALAND/made/PURE WOOL/BERET HOOD/UNITED NATIONS/PROPERTY/7 5/8"united nations, peacekeeping, blue berets, uniform, interwar

This style of collar has a long history in the Royal Australian Navy, descending from the uniform style of the 19th century Royal Navy.Rectangular shaped collar with three white parallel lines running the border of the collar. Collar is light navy on top and striped white and blue on interior. Collar is held in place with nine buttons on the jumper, there are nine corresponding machine-stitched button holes on the collar. Handwritten on the interior at the back of the neck and on the edge of the square collar is "D. KRUEGER" On interior label on right side, "A.G.C.F./SIZE. 3/8406.66.078.0013/R.A.N./MADE IN/AUSTRALIA"royal australian navy, uniform, marine, australian defence apparel, ratings, collar

This belt was manufactured for military service. It is presumably a World War Two era article of Army uniform.This Army belt was presumably made and used during the World War Two era and therefore has historic value. Brown leather belt with a brass buckle. The belt has twelve holes in two rows at one end for fastening into the buckle. The very tip narrows to a point. There is light brown stitching along the edges of the belt. There are two brass studs which hold the leather in a loop of the other end. There is an additional piece of leather fixed to this looped edge for holding the other end in place. The buckle is made of a silver coloured brass and has two rods which pass through two of the twelve holes for fastening. The buckle also exhibits blue/green copper corrosion in several areas. belt, war, uniform, army, royal australian army, world war two, ww2, wwii, second world war

They are part of a vintage three piece condiment set which has a Guernsey coat of arms insignia badge attached to the mustard pot not pictured here. See entry 3531. The salt and pepper shakers and mustard pot were used in the 1900's. It was originally owned by Edward Lloyd Mauger.A pair of vintage small chrome plated salt and pepper shakers with a basket weave outer container and a cobalt blue glass insert to hold either the salt or pepper. They have domed screw top lids and a hole in each silver base. They are part of a three piece condiment set - see entry 3531 for the mustard pot.'Cromplate' on the base of the mustard pot.tableware, salt and pepper shakers, food containers, condiment sets

The Salt Box was used to store salt for cooking purposes.An early 20th century German white wall mount enamel tin wall Salt Box with a dark blue lined trim around the edges and shaped top at the back. It has a wooden lift up lid, a hole for mounting it on a wall as well as 'Salt' inscribed on the front in elaborate black lettering. 'Salt' is printed on the front in elaborate letteringfood containers, salt boxes, cooking equipment