Showing 286 items
matching brass ring
-
Dandenong/Cranbourne RSL Sub Branch
Weapon - Shell Fuse Cap, Galt Manufacturing Company
Galt Mfg Co in Canada produced shell percussion caps for allied munitions during WWI. This cap would have been attached to the end of a shell and provided the ignition to cause the shell to explode. It has a small arrow in a circle on the base which indicates use in the Australian Military.This object can tell the story of allied war production, showing that it was produced in Canada and used in Australian munitions. Brass shell fuse, rounded pyramid in shape.m Has multiple sections and a ring of measurements around the circumference. Lighter coloured cap on the top. Has a number of holes on the surface.Underneath: Galt Around the cirumference: DC, and measurements 1-22 cmgalt, shell, percusssion, cap, munition, brass, manufacturing, war, wwi -
Dandenong/Cranbourne RSL Sub Branch
WWI Belt Buckle with Snake clasp ( Refer also 0539 & 0539B)
Brass belt buckle. Rectangular shaped ring to fit around belt with small circle eyelet fused on to hold a "S" shaped clasp.The Clasp is in the form of snake with a head of both ends. S shape clasp has some markings on it and head of snake at both ends. -
Dandenong/Cranbourne RSL Sub Branch
Safety Match Container
Brass container with flip up hinged lid to hold matches. Base has match striker lid has ring clip.Engraving on lid and half base diagonally. -
South Gippsland Shire Council
Plaque, SGSC - For Olympic Team Support 2000, 2000
Brass plaque mounted on wood board. Features Australian Crest above Olympic rings affixed to top with smaller plate affixed to bottom. The lower plate features raised text and engraving. -
Ballarat Tramway Museum
Badge - SEC pass, AMOR, Employees Pass badge No. 166, c1950?
Stamped enamelled round brass piece with a hole stamped at the top and ring placed through. Used as a SEC tramways employees pass. Has the SEC logo in the centre, organisational name (State Electricity Commission of Victoria) in white enamelled and outer ring the words "Electricity Supply Department, Provincial Tramways". This was in blue enamel. On rear stamped the number "166" and on base of badge letter "AMOR", assuming indicating who manufactured the badge. Is believed to be issued to Mr. Norm Pearson, Administrative Officer of the SEC. Does not appear to have had a piece at the top of the badge for the ring to pass through like Reg Item 852 did.tramways, trams, employees pass, tickets, provincial tramways, badges -
Ballarat Tramway Museum
Badge - SEC pass - set of 12, AMOR, c1940?
Set of 12 Stamped enamelled round brass pieces with a hole stamped at the top and ring placed through. Used as a SEC tramways employees pass for either all Provincial tramways, Geelong, Ballarat or Bendigo only. All badges have the SEC logo in the centre, organisational name (State Electricity Commission of Victoria) in white enamel and outer ring the words "Electricity Supply Department, Provincial Tramways", or "Electric Tramways Ballarat" or "Electric Tramways Bendigo" or "Electric Tramways Geelong". This is in blue enamel. On the rear are stamped numbers and manufacturers name - "AMOR MELB" or "STOKES & SONS MELBOURNE" in the bottom portion of the pass, except .9 which is "STOKES" only. Items .1 -> .12 individually tagged. 1941.1 - Geelong - No. 46 - Stokes - silver background, has been used - see image file btm1942i1 and for back btm1942i2. .2 - Bendigo - No. 51 - Stokes - has been used - partially worn, silver background. .3 - Ballarat - No. 55 - Stokes - may have been used, silver background, silver background. .4 - Ballarat - No. 100 - Stokes - has been used, red in shield very faded, silver background. .5 - Ballarat - No. 102 - Stokes - has been used, worn and chipped on blue enamel near top gold centre, brass back. .6 - Bendigo - No. 105 - Stokes - gold/brass back, may have been used, some wear on right side. .7 - Ballarat - No. 106 - Stokes - appears to have been used - dirt marks on rear and front of badge, brass/gold background. .8 - Bendigo - No. 106 - Stokes - appears not to have been used, brass/gold quite bright. .9 - Geelong - No. 111 - Stokes - appears to have been used, silver back - see image file btm1942i3. .10 - Bendigo - No. 123 - Stokes - may have been used - silver background. .11 - Provincial - No. 570 - AMOR MELB - has not been used brass/gold background. .12 - Provincial - No. 657 - AMOR MELB- has not been used, brass gold background.tramways, trams, employees pass, tickets, provincial tramways, badges -
Ballarat Tramway Museum
Badge - SEC pass, Employees Pass badge No. 127, c1950?
Stamped enamelled round brass piece with a hole stamped at the top and ring placed through. Used as a SEC tramways employees pass. Has the SEC logo in the centre, organisational name (State Electricity Commission of Victoria) in white enamelled and outer ring the words "Electricity Supply Department, Provincial Tramways". This was in blue enamel. On rear stamped the number "127" Was issued to Mr. Adam Balloch, carpenter with the SEC depot. Had a piece at the top of the badge for the ring to pass through, but this has been damaged and transferred onto the badge proper.tramways, trams, employees pass, tickets, provincial tramways, badges -
Ballarat Tramway Museum
Badge - ESCo 1908 pass, Stokes & Sons Melbourne, 1906
Yields information about a system of tram passes that were provided to the City of Ballarat Councillors in 1960 and has a strong association with the Councillors himself.Stamped brass badge or pass for free travel on the Ballarat Tramways for the year 1906. Stamped to give the words "Ballarat Electric Trams 1906" on the outer edge of the Badge and then stamped out to give the letters 'B E T" on the inside of the badge. On the top of the badge, a hole has been provided and a steel ring fitted. On the rear of the badge has the letters "CR. D. Hughes" stamped on the top of the badge and on the bottom the manufacturer's name "Stokes" in a reverse stamp. Indicates badge issued to Councillor D. Hughes for the year 1906. A similar badge was sold on ebay for $US 49.95 December 2007 - paperwork on file. Images on file - images i3 and i4. Was issued to Councillor C. R. Brokenshire. E-mail from Alan Bradley, re additional item 29/1/2012 - See Reg Item - The Electric Supply Co issued the passes to councillors of the City of Ballaarat for free tram rides. I don't know whether passes also went to Ballarat East and Sebastopol councillors as well. In Bill Scott's "Last tram at 11" on page 41 is a 1912 poem 'The councillor's farewell to his tramway pass". The ESCo tried a few economy measures at that time. Passes for councillors were withdrawn in 1912, as were free passes for employees "owing to our financial position". Employees were still allowed on free in uniform, but charged one-third of fare when off duty. In 1913 one-man operation came in." For another example see Reg item 5239. Related documents provides some information on the value of the items.tramways, trams, fares, badges, tickets, passes, esco -
Ballarat Tramway Museum
Badge - MMTB Inspector, Stokes & Sons Melbourne, 1940's?
Stamped metal uniform badge for MMTB Inspectors. Tramways Board logo at top of badge in silver finish, the words "INSPECTOR" and the scroll outline in brass or gold colour. The area where the inspector's number has been painted on is in brass/gold finish. The number "103" has been painted on in royal blue colour. The enamel finish within the scroll work also finished in royal blue. On rear badge in brass/gold finish, with word "STOKES" stamped into. Two metal rings have been soldered onto the rear of the badge and a spring steel clip provided to enable the badge to be clipped to a hat. Assumed was Les Denmead's badge when employed by the MMTB.tramways, trams, mmtb, inspectors, badges, uniforms -
Ballarat Tramway Museum
Badge - Union badge, APFX, late 1930's?
Has a strong association with John Prisk, ESCo tram driver of the 1910's and demonstrates the importance of being a union member at the time and the badge provided by the unionAustralian Tramway Employees Association (Tramways Union) badge. Badge made on a brass or metal backing with a gold (9ct) plating with words "Australian Tramway Employees Association" on outer edge of badge with a royal blue enamel background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. Has a steel ring through a hole in the top of the badge. On back of badge has stamped into the badge "John Prisk / Member / Since 1912". On the base of the badge has words "APFX 9ct" stamped into the bottom of the badge. See image files for front and back of badge. See worksheets in Reg. Item 3140 for details about Jack and his SEC driving career.tramways, trams, sec, drivers, esco, unions, badges, aeta, employees -
Ballarat Tramway Museum
Badge - ESCO Councillor, Stokes & Sons Melbourne, 1906
Yields information about a system of tram passes that were provided to the City of Ballarat Councillors in 1960 and has a strong association with the Councillors himself.Stamped brass badge or pass for free travel on the Ballarat Tramways for the year 1906. Stamped to give the words "Ballarat Electric Trams 1906" on the outer edge of the Badge and then stamped out to give the letters 'B E T" on the inside of the badge. On the top of the badge, a hole has been provided and a steel ring fitted. On the rear of the badge has the letters "CR. T. J. Hoare" stamped on the top of the badge and on the bottom the manufacturer's name "Stokes" in a reverse stamp. Indicates badge issued to the Councillor for the year 1906. For another example see Reg item 1948tramways, trams, fares, badges, tickets, passes, esco -
Bendigo Historical Society Inc.
Accessory - VICTORIAN RAILWAYS UNION BADGE
Brass & enamel badge for Victorian Railways Union, white enamelled centre with gold letters VRU surrounded by a dark blue ring with wording Victorian Railways Union, numbered on back 5408.Broo?an & Kingorganisation, union, transport -
Bendigo Historical Society Inc.
Accessory - VICTORIAN AMATEUR TURF CLUB BADGES, 1905 - 1908
Two brass & enamel VATC badges, 1 dated 1905 - 1906 with a dark blue outer ring in shape of a belt around a white centre with gold letters VATC, number on back 349, 1 with gold horse & jockey riding through a horse shoe on top of a shield off blue & white enamel with gold letters VATC, dated on back 1907 - 1908 & numbered 319.clubs and associations, sport -
Bendigo Historical Society Inc.
Accessory - RED CROSS BADGE
Red Cross pin badge, circular brass with dark blue outer ring with wording Australian Red Cross Society Victorian Division around a white centre with a red cross.organization, society, red cross -
Queenscliffe Maritime Museum
Clothing - Belt decoration
She was nearing the end of her voyage, close inshore off Cape Otway at Curdies Inlet (now called Schomberg Reef), east of Peterborough and 150 miles westward of Melbourne. When the wind suddenly dropped the ship drifted onto an uncharted reef and became stuck fast. There was no loss of life ans all the passengers, crew and mails were taken off by a passing coastal steamer, the Queen, out of Port Fairy the following morning. The passengers' luggage and some of the cargo was rescued, but the weather worsened and work was abandoned and cargo littered the beach. The wreck was sold for salvage to local merchants: two were drowned in attempts to reach her. It became a popular wreck site for diving and over 100 relics have been handed in. The bell of the ship is in the Warrnambool Museum, southern Victoria. Relics at Flagstaff Hill Maritime Museum include a cannon, a communion set, a brass candlestick, and a diamond ring.A diamond shaped brass belt decorationschomberg, salvage, peterborough -
Ballarat Tramway Museum
Badge - Employees Pass badge No. 225, AMOR, c1940
Used as a SEC tramways employees pass. Demonstrates the badge used by the SEC for free travel on the trams.Stamped enameled round brass piece with an area of solder on the rear indicating where a retaining ring had been placed after the original ring at the top has been broken off. Has the SEC logo in the centre, organisational name (State Electricity Commission of Victoria) in white enamelled and outer ring the words "Electricity Supply Department, Provincial Tramways". This was in blue enamel. On rear stamped the number "225" and on base of badge letter "AMOR", indicating who manufactured the badge.stamped number 225 and "AMOR"employees pass, tramways, sec, tickets, provincial tramways, badges, amor, btm -
Port Fairy Historical Society Museum and Archives
Functional object - cow tags, up to c.1960
A cow herdsman collected animals each morning and returned them each evening. They pastured on the common off Campbell St. Each cow had one of these numbers supplied by the Borough CouncilBrass tags for cows pastured on the common. No 15 heavier ring soldered around edge) 447 7 559. Numbers punched through brss platenos 15, 447, 559 PFBlocal history, rural industry, livestock, government local government council, cow, common -
Carlton Football Club
Hand Held Bell, Hand Held Bell with a small inscription on the inside
The bell was used for Trade Week to signify "time's up" at Optus Oval. Prior to this it was used to let Alan Espie's children on their Wandin property to come home.Why Al chimes in for Carlton Tony De Bolfo, Carlton Media Feb 20, 2014 11:05AM Alan Espie with the famous bell. (Photo: Carlton Football Club) Alan Espie with the famous bell. (Photo: Carlton Football Club) Related Etched into the rim of the bell Alan Espie has rung at every trade week gathering since 1994 is a touching quote attributed to his grandson. Dear Pa, May you always ring true blue, Love Harry Just thinking about that inscription often brings big Al to tears. The story of the Espie bell has its origins at the old family property at Wandin in the picturesque Yarra Valley, in the days when the Espies’ kids were at the neighboring creek fossicking for local platypus. “If they got too far away we’d ring an old cowbell,” Espie recalled, “and years later, my daughter Jo brought me this replacement bell from some second-hand naval place”. “Not long after Shane (O’Sullivan) asked me to officiate at trade week and that’s when the bell came into vogue.” A permanent fixture at trade week, Espie would ring the bell to signal the opening of trading when club recruiters gathered – initially within the confines of the Carlton Heroes Stand at Visy Park, more recently at Etihad Stadium. In those early days at Carlton he caused a stir as bell ringer, drawing curious responses from officiating journalists, recruiters and coaches alike. “I even remember (Kevin) Sheedy asking me if I was selling muffins,” he recalled. Then, when trade day was relocated to Etihad, Espie’s daughter thought it appropriate to get the bell inscribed. “Because the bell was leaving Carlton, Jo got it inscribed on my grandson’s behalf, because he was only four or five then. When I saw what was inscribed I was tearful,” Espie said. “The bell is very important to me, particularly at this time, because Jo is battling health problems at the moment, my grandson is autistic and she’s fought like hell to get him through.” Espie joined Carlton’s Under 19 committee on the eve of the senior Premiership season of 1979 and managed the club’s junior squads, the Bert Deacon Squad included. “I worked very closely with Geoff Southby, ‘Swan’ McKay and Trevor Keogh when they were coaching the Under 19s and I was recruiting as well,” he said. “In 1981 and ’82 I forward scouted for ‘Parko’ (David Parkin) and later on I did the same for ‘Wallsy’ (Robert Walls). After that I coordinated recruiting in central Victoria and it was nothing for me to do 25,000ks a year in my own car – and I loved every minute of it.” Espie’s passion for Carlton and empathy for its wartime players Bert Deacon, Ollie Grieve and Jack “Chooka” Howell can be sourced to his childhood years. His grandparents lived not far from the old ground on Wilson Street “and that’s how I got in for the ’45 Grand Final”. “My uncle, who had just got back from the war, grabbed a ladder from Wilson Street and set it up against the barbed wire fence at the ground. I climbed the ladder and caught my arm on the barbed wire, but I got over the top and saw the game while I straddled the fence,” Espie said. “What I saw was what you would today call ‘spotfires’ and I reckon it took football 20 years to get rid of it.” Today, Espie continues to ring in the yearly trade talk days at AFL headquarters (with the notable exception of 2012 when he was hospitalized), but he’s in no doubt as to where the bell belongs. “This bell has had nothing to do with Wandin but everything to do with Carlton - and with the 150th year of the club I think the bell stays here (at Visy Park). I still hope to ring the bell for the AFL this year, but at least I’ll know where it is,” Espie said. “I’ve told Jo about this and she tells me Harry’s rapt, because he’s a big Carlton supporter and he’s so happy his name is on the bell.”Wooden handle attached to a brass bell."Dear Pa, may you always ring true blue, Love Harry" -
Mont De Lancey
Cash Box, Milners
Belonged to Colonel Otter.Metal cash box with lid, and three compartments in a lift-out interior tray. Two compartments have lids with metal rings.On lid: "COLONEL OTTER" in gold lettering. On lock at top & on brass handle: "Milners Liverpool"boxes, strongboxes -
Mont De Lancey
Dinner gong, C 1890
From the home of the late Mr and Mrs W.J. Sebire, C1890Beaten brass dinner gong with silver trim on two supporting horns at side, mounted on a wooden base. Mallet is silver with hanging ring and leather surround on knob. Has a leather hanging strap.gongs, gong strikers -
The 5th/6th Battalion Royal Victoria Regiment Historical Collection
Weapon - Sword, Schintu Gunto New army pattern
Brown woven handle 250mm in length brass hand web protector with floral imprint damaged blade edge. Scabbard - metal & brown in color slightly curved. Belt metalic ring with copper end chape & mouth piece. regimental property, ww2, japanese sword, war in the pacific, ija -
Mont De Lancey
Functional object - Horse Bit, Unknown
A decorative ribbed brass horse bit or mullen which is part of a horse's tack with two looped ring attachments at each end. It fits inside the horse's mouth and gives the rider control of the horse's head.horse tack, horse accessories, bridle bits, horse riding equipment, bits -
Trafalgar Holden Museum
Functional object - Horse bit heavy snaffle, ca1910
Horse bit used on horse tackle during the 19th century manufactured and sold by Holden and FrostUsed on horse tackle 19th and 20th centuries Brass horse bit heavy snaffle, two T-bars joined in the middle with two rings attached on each barbit, equine, brass, snuffle -
Mont De Lancey
Functional object - Horse hames
Used on a farm in the late 19th or early 20th century.A pair of brass horse hames with a missing chain link at the top. Each has a hook attached with a metal ring at the end. It has four rings. It would have been attached to a horse collar and used to to distribute the load around a horse's neck and shoulders when pulling a wagon or plough. The collar often supports and pads a pair of curved metal or wooden pieces, called hames, to which the traces, which attach to the wagon or plough, of the harness are attached. The collar allows the horse to use its full strength when pulling. It was used in the late 19th or early 20th century.horses, horse accessories, harness, animal accessories, farm equipment, hames -
Mont De Lancey
Ammunition pouch
On loan from Eunice Russell née Gray. Used by Ebenezer Gray. Brown leather souvenir ammunition pouch. Turkish. Three compartments, with metal ring to attach to belt. Narrow belt strap. Has brass studs. Stitching on compartments.ammunition pouches, military equipment -
Mont De Lancey
Tape measure, J. Rabone & Sons
Tin tape measure in circular-shaped brass covering. Has a metal ring at the end. rusty. tape measures, measuring instruments -
Bendigo Military Museum
Badge - BADGES - RSL
RSL badges of two different sizes relating to Imperial League pre WW2.1. Badge - White shield with crown on top with No. 54 on a green background.. Inscription within a blue circle and inside on gold background are two armed soldiers standing at ready. Banner along bottom of shield with "Australia" written on it. Two rings on back with no pins to attach. 2. Badge - White shield with crown on top. Inscription within a blue circle and inside on gold background are two armed soldiers standing at ready. Banner along bottom of shield with "Australia" written on it. On back is a round brass plate with two clips on back.1. Inscribed "Imperial League - Returned Sailors, Soldiers. At bottom "Australia". On back No. B8396 and maker "W. Bishop" and "Copyright". 2. Same inscription as one. A no 54 in box on top.rsl badge, imprial league -
Melbourne Tram Museum
Functional object - Badge, Prahran & Malvern Tramway Trust (PMTT), 1910's
Cast hexagonal nickel plated brass or sterling silver badge with a single hole in the top, with words "Prahran Tramways Trust Malvern" on one side and on reverse "Officers No. Pass" with the number "6" stamped in. Fitted with a nickel plated ring. Raised edges with flat sides. Manufacturer unknown. In the lower edge of the reverse of the badge are the letters "STC.SN" stamped in. These are not present on the other two examples eg Reg Item 576. Has been mounted or enclosed within a coin collectors/sale cardboard folder with an embossed crown on the front. See Inscriptions.On card board enclosure in ink "Prahran Tram. Trust" and "Sterling Silver Pass" - "$15"trams, tramways, badges, officers, pmtt, passes -
Melbourne Tram Museum
Functional object - Correspondence Satchel, Melbourne & Metropolitan Tramways Board (MMTB), c1940?
Leather Correspondence Satchel with associated materials consisting of: .1 - Leather Correspondence satchel made from brown leather, sewn on the edges with two flaps that could be reversed with two metal plates riveted onto each flap giving the destination of the bag, two metal rings to enable the bag to be secured and a leather carry handle on one side riveted to the bag. Metal plates - brass - "Traffic Manager Head Office" and nickel plated "MMTB Hawthorn". 2 - Padlock and Key - Lockwood Australia brass with steel hasp engraved "MMTB Hawthorn", key stamped "Hawthorn 1220". Received with a brown string noted through the key - retained. 3 - Two steel metal pins used for securing larger correspondence satchel - see article written by Dean Gilbert about the correspondence procedures at MMTB Head Office in 1979 - htd3000i7 where the bag for "Northcote bus depot" (Northcote Bus Workshops) is shown in a photograph. 4 - Paper tag brown card with a reinforcing ring, print item "3/585", headed "Melb & Met Tramways Board", written to go "Essendon" in pencil and "Not Required at Essendon and bag returned". This item found inside the bag with a piece of light brown string. See image i8 Article by Dean Gilbert 2018 refers to procedures for the handling processes of these bags. Items packed within two cardboard folders.trams, tramways, mmtb, hawthorn depot, head office, traffic officers, mails, correspondence -
Melbourne Tram Museum
Functional object - Badge, Metropolitan Transit Authority (MTA), 1980's
Manufactured badge or employee pass - brass with nickel plate finish with a single hole in one side, engraved with the Metropolitan Transit Authority logo and the organisation name. A number has been stamped on the rear. Donor advised that these passes were issued to MTA Traffic Officers (see related documents). Pass numbers held: 47, 81, 98 and 182. No. 47 has a small metal key ring through badge as shown in the photograph. See also Reg Item 396 for another example.trams, tramways, tickets, mta, the met, badges, officers, passes