Showing 322 items
matching floral pattern
-
Slovenian Association Melbourne
drawing - pattern, Marcela Bole drawing-pattern, 1925
... Drawing of a pattern for a nighty with floral decoration Ghezzo ...Young girls attending convent school were taught sewing and decorating the garmentsDrawing of a pattern for a nighty with floral decorationGhezzo, Gec M. and measurementssewing pattern, nighty, floral decoration, marcela bole -
Anglesea and District Historical Society
Sugar Shovel, Estimated date: c 1890
Nevada silver (electroplated nickel silver) sugar shovel by Daniel & Arter Ltd. Fiddleback pattern. Shovel shaped bowl with etched floral design.nevada silver, daniel & arter ltd, sugar shovel -
Anglesea and District Historical Society
Newspaper Holder, Uranium Glass, Unknown - Estimated date 1930's?
Pale yellow-green, uranium glass object was used as a newspaper holder. The rolled newspaper was inserted through the hole in the middle. The glass has been pressed with geometrical patterns.Green-yellow frosted glass with floral design etchings.newspapers, glass, uranium glass, depression glass, vaseline glass -
Tennis Australia
Racquet, Circa 1975
A Davis "Duke" tennis racquet, with aluminium and fibreglass overlays, and leather handle grip with patterned perforations. Davis logo and model name features across base of head and throat. They are surrounded by illustrations of male tennis players amongst ornate floral designs along the shoulders and the shaft. TAD "Kings of the Court" trademark features on lower shaft on reverse. Davis coat-of-arms "Duce virtute comite fortuna" trademark features on lower shaft on obverse. TAD trademark features on rubber butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Leather, Adhesive tape, Rubber, Fibreglasstennis -
Tennis Australia
Racquet, Circa 1975
A Davis TAD tennis racquet, ribbon whipping around shoulders, fibreglass overlays along the throat and shoulders, and leather handle grip with patterned perforations. Davis logo and model name features across base of head and throat. They are surrounded by ornate floral designs along the shoulders and throat. TAD "Kings of the Court" trademark features on lower shaft on reverse. Davis coat-of-arms "Duce virtute comite fortuna" trademark features on lower shaft on obverse. TAD trademark features on rubber butt cap. Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Leather, Adhesive tape, Rubber, Fibreglass, Painttennis -
Tennis Australia
Racquet, Packing cover, Circa 1975
A Davis Lady Elite tennis racquet, with fibreglass overlays along the shoulders and shaft, and leather handle grip with patterned perforations. Davis logo and model name features across base of head and throat. They are surrounded by ornate floral designs along the shoulders. 'D' and 'TAD' trademarks feature along shaft, with further floral motifs in between. TAD "Kings of the Court" trademark features on lower shaft on obverse. Davis coat-of-arms "Duce virtute comite fortuna" trademark features on lower shaft on reverse. TAD trademark features on rubber butt cap. Racquet is accompanied by original presentation cover. Inscription, in part: TAD/DAVIS/TENNIS RACKETS/AUTHORIZED DEALER/.../DISTRIBUTED BY/VICTOR SPORTS, INCORPORATED/... Materials: Wood, Nylon, Ink, Glue, Lacquer, Metal, Leather, Adhesive tape, Rubber, Fibreglass, Painttennis -
Kew Historical Society Inc
Book, Thames & Hudson, Textile Designs: 200 years of patterns for printed fabrics arranged by motif, colour, period and design / [by] Meller & Elffers, 2018
Newly available in paperback, this volume remains unsurpassed as the biggest and most lavish survey of printed textiles ever published. Textile Designs presents a comprehensive selection of the colourful patterned fabrics used for clothing and interior decoration over the last 200 years. Here are the bright and hugely enjoyable materials of everyday life - the printed calicos and cottons, the flowered cretonnes and chintzes, the polka-dot silks and foulards. These are presented by motif and pattern under flye separate headings: Floral, Geometric, Conversational, Ethnic, and Art Movements and Period Styles, and illustrated in nearly 2,000 colour reproductions. Textile Designs is not only indispensable to professionals in the fashion and decoration fields everywhere, but will also be an inspiration to designers in the graphic and visual arts, a reference book for collectors and a delight for aesthetes everywhere.464 p. : col. ill. ; 30 cm. Published London : Thames and Hudson, 2002.non-fictionNewly available in paperback, this volume remains unsurpassed as the biggest and most lavish survey of printed textiles ever published. Textile Designs presents a comprehensive selection of the colourful patterned fabrics used for clothing and interior decoration over the last 200 years. Here are the bright and hugely enjoyable materials of everyday life - the printed calicos and cottons, the flowered cretonnes and chintzes, the polka-dot silks and foulards. These are presented by motif and pattern under flye separate headings: Floral, Geometric, Conversational, Ethnic, and Art Movements and Period Styles, and illustrated in nearly 2,000 colour reproductions. Textile Designs is not only indispensable to professionals in the fashion and decoration fields everywhere, but will also be an inspiration to designers in the graphic and visual arts, a reference book for collectors and a delight for aesthetes everywhere.textiles - history, textile design -- themes -
Tatura Irrigation & Wartime Camps Museum
Clothing - Ladies Night Gown, 1940's
Ladies nightgown made at Camp 3, Tatura from re-made men's pyjamas, with the addition of floral material and bows as a feminine toughPale blue and white striped cotton nightgown, long sleeves, bodice of red and blue patterned material with ties attached either sidenight gown, hoefer family, camp 3, ww2 camp 3, costume, female night attire -
Benalla Art Gallery
Ceramic, ROYAL CROWN DERBY, Pair of urns, 1889
Established: Derby, Derbyshire, England in 1750 by Andrew PlancheVictorianLedger Bequest, 1993Urns in traditional Royal Crown Derby pattern of blues, flowers and gilded decoration.Verso: A: "ROYAL CROWN DERBY" above ROYAL CROWN DERBY maker's mark right of hole in centre; "ENGLAND" vertical to right of maker's mark in red underglaze; "1134/2553" in orange underglaze above maker's mark. B: "ROYAL CROWN DERBY" above ROYAL CROWN DERBY maker's mark right of hole in centre; "ENGLAND" vertical to right ofmaker's mark in red underglaze; "1134/2553" in orange underglaze above maker's mark. "B" in orange underglaze to the far left of makers mark.ceramic, urns, decorated, gilded, floral, royal crown derby -
National Wool Museum
Uniform - 1992 Barcelona Olympic Games Women's Official Occasions Floral Print Gilet Shirt, Wendy Powitt, c. 1992
About the 1992 Barcelona Olympic Games donor Doug Pleasance wrote- During the 1980s the Australian wool industry was at its most prosperous times with record numbers of sheep producing wool receiving ever increasing values due to the success of the Reserve Price Scheme, and the overall guidance of the Australian Wool Corporation (AWC). As a humble technician, my role was a low profile newly created position of Controller, Technical Marketing, where wool was to be marketed on its technical properties, as distinct from the Product Marketing Group which exploited the traditional high profile approach of marketing wool's superior fashion attributes. The Woolmark was the tool central to this approach. The 1992 Barcelona Olympic Games saw an evolutionary change in designer selection. A Declaration of Interest Form was communicated to over forty potential designers. The task and especially tight timelines that were involved deterred many aspirants, however, there remained eight designers with the potential we were seeking. These eight designers were paid $3,000 per submission and the winning designer, Wendy Powitt, was paid $15,000. For the first time the judging panel included two athletes, one male swimmer and one female basketballer, their influence was pivotal. The ensemble consisted of three elements- 1. The Official Uniform which was used for travel and all official functions. This included: a tailored blazer and trouser/skirt (all water repellent) by Fletcher Jones, pure wool olive-green faille fabric by Foster Valley, cotton PE formal shirt by Pelaco, pure wool knitwear by Spangaro, printed wool tie by TD Noone, wool nylon socks by Holeproof and footwear by Hush Puppy. 2. Opening Ceremony Uniform a lightweight wool fabric printed with floral designs that had been inspired by the work of Australian artist Margaret Preston. This included: Lightweight W/PE shorts by Fletcher Jones in Foster Valley Fabric, socks by Holeproof and footwear by Hush Puppy. 3. Village Clothing was designed to be highly visible garments to make it easy to spot the Aussie and helped to contribute to good team spirit. This included: A pure wool shirt featuring blocks of contrasting colours, and a newly developed stretch 50:50 wool/cotton fabric by Bradmill was made into shorts and jeans by Fletcher Jones.The shirt is sleeveless and in majority cream coloured. Around the hem, buttons and across the front of the shoulders is an appliqued floral design of Australian flowers and leaves inspired by the designs of artist Margaret Preston. The appliqued pattern continues around the bottom hem but not over the shoulders of the shirt.1992 barcelona olympics, sport, athletes, fashion, design, artwork, drawing, uniform -
National Wool Museum
Artwork, other - Sketch
Sketch from which carpet manufacturing pattern is graphed out, prior to preparation of Jacquard card. Genoese (Axminster) 4/4226. Three sketches, gouache, two long and one short designs. The two long sketches are pasted at one end onto backing paper, which contain inscriptions. Floral design in blues, pink, mauves, white, grey and greens.Genoese 4/4226 AL Ingramweaving, carpet, ingram, a l -
Stawell Historical Society Inc
Photograph, Hand coloured photograph of woman in Gold Frame and domed glass
Gray FamilyHand Coloured photograph in gold frame and domed glass. Woman with short curled brown hair parted to right and European complexion. Pale blue eyes. White blouse has collar with floral attachment. Blue jacket with white pattern. Collar attachment. Studio portrait background. Flower is identical to young mans collar attachment in accompanying photo. Related to Deep Lead and Cray family.Frame has gilded floral painted red and blue at top, bottom and two sides. Glass is convex. Has gilded boss between florals. -
Kew Historical Society Inc
Clothing - Protective Wear, Apron, 1950s
One of a collection of fourteen items of protective wear and household textiles donated by Lisa Sylvan, a long-term resident of Kew, Five of the items are homemade aprons made and worn by her mother. Of the seven pinafores, three identical but differently sized pinafores were made in her parents' factory, while the other three are handmade. The handmade aprons and pinafores are representative samples of women's work, possibly from published patterns, using fabrics originally deigned for dresses. Typically, contrasting fabrics and colours were selected to provide visual interest. The donation also includes a hand embroidered linen supper cloth and a commercially produced 'birds of Australia' printed table cloth. Most of the collection derives from the 1950s.Although not uncommon, hand-made protective clothing in the form of aprons and pinafores often represents samples and styles of 'women's work' using remnant fabrics often designed for other purposes. While generally utilitarian, women found means of gracing these items by the use brightly coloured fabric or patterns, the positioning of pockets and the use of contrasting fabrics to provide visual interest.Multicoloured cotton apron using a fabric design employing floral emblems and figurative detail. The apron is hemmed with a pleated fabric of a different colouraprons, protective clothing, handmade clothing, costume accessories, lisa sylvan -
Kew Historical Society Inc
Clothing - Pink Thai Silk Coat Dress, Dominex, 1960s
The Fashion & Design collection of the Kew Historical Society includes examples of women’s, men’s, children’s and infants’ clothing from the 18th, 19th and 20th centuries. Items in the collection were largely produced for, or purchased by women in Melbourne, and includes examples of outerwear, protective wear, nightwear, underwear and costume accessories. This coat dress is one of a number of items donated to the Fashion Collection by Dione McIntyre.The McIntyre Collection of clothing and clothing accessories forms one of the largest single donations to our Fashion & Design collection. It includes clothing and clothing accessories worn by four women in the Cohen and McIntyre families across three generations. The items worn by Melbourne architect, and Kew resident, Dione McIntyre date from the 1960s and 1970s, and include evening wear, day wear, hats and shoes. As Dione McIntyre often accompanied her husband, fellow architect Peter McIntyre, to formal events, there are a number of pieces of evening wear among the items. The McIntyre Collection also includes items worn by women of an earlier generation: by Lilian Cohen, Dione McIntyre's mother, and by her mother-in-law, the wife of the architect Robert McIntyre. At the other end of the chronological spectrum are a number of outfits belonging to, worn and donated by Annie McIntyre. These include outfits created by notable late 20th century Australian and/or international fashion designers. The McIntyre Collection is significant historically and artistically as it includes examples of design that demonstrate changing tastes in fashion over an 80-year period. The collection is also significant in that it includes the work of a large number of Melbourne designers from the 1960s to the 1990s. Three quarter length hot pink Thai silk coat dress. The pattern of the fabric includes and abstract floral design encased in borders of flowersLabel: Dominexdominex, women's clothing, australian fashion - 1960s, coat dresses, mcintyre collection -
Kew Historical Society Inc
Clothing - Silk Georgette, Floral Chiffon & Velvet Dress, c. 1926-28
An item forming part of a collection of costumes, photographs and documents relating to the Weir family who lived in a mansion, originally named Illapa, at 84 Princess Street, Kew, from c.1917 to 1950. This historically significant collection includes items relating to both George Weir (1866-1937), his wife Edith Mary Weir (1867-1948) and their children. George Weir attained national prominence in the mining industry, becoming General Manager of the North Broken Hill Silver Mining Company in 1903 (later renamed North Broken Hill Mining Company 1905-12, and North Broken Hill Ltd 1912-1988), and subsequently President of the Mine Owners Association. He was to remain General Manager of North Broken Hill Ltd until his retirement in 1926.This garment is part of a collection of women’s clothing, owned and worn by Edith Mary Weir (nee Betteridge) - born in Clare, South Australia 1867, died Kew 1948 - and also by her daughter. The garments date from the 1880s to the 1930s. The collection includes day dresses, evening dresses, evening coats, capes, and undergarments. As the wife and daughter of a mine manager, the collection includes representative examples of clothing worn by upper middle class Australian women in domestic circumstances, and at social and civic events. A number of the costumes from the 1920s to the 1930s are of a particularly fine quality, being both rare, representative and intact examples of Australian fashion of the period. The garments in the Weir Collection were donated to the Kew Historical Society by a granddaughter of Edith Weir in 2017.Cocktail dress of an overall muted pink colour, with an outer layer of multi-coloured pink silk georgette patterned all over with small flowers. Below the waist the georgette is formed into separate hemmed floating panels. Pink velvet is used on the square neckline and on the cuffs of the sleeves. The same velvet fabric is used in the separate pink velvet headband with feathers. edith mary weir (nee betteridge), illapa -- 84 princess street -- kew (vic.), women's clothing, weir collection, dresses, fashion -- 1920s -
Flagstaff Hill Maritime Museum and Village
Ceramic - Chamber Pot, 1912
In the 19th and early 20th centuries, J. & G. Meakin were important, large-scale producers of good quality, ironstone tableware (‘White Granite’ ware) that met a ready market in the United States, South America, Australia, and other traditional British markets. By the 1890s the company was one of the world’s largest earthenware manufacturers. Although export teaware and tableware was the factory’s staple commodity, Meakin also manufactured toilet ware, kitchen ware and a wide range of fancy earthenware. The company was amongst the first British pottery firms to experiment with modernist designs associated with the art deco period. The Moderne' range was introduced in 1929 consisting of an angular shape decorated design with geometric patterns and often highlighted with silver or gold. This range remained in production through the 1930s. Post 1945 the company introduced the streamlined Studio shape (1953) and Horizon shape (1955) both heavily influenced by the Russell Wright ‘American Modern’ tableware. In 1964 a new Studio shape was released with tall streamlined coffee pots used as the background for many contemporary patterns now associated with the 1950s and 1960s. Designs by Jessie Tate and Eve Midwinter, some originally found on Midwinter shapes, also appear on 1970s Studio ware. The Studio range was one of Meakin’s most successful and continued in production until the late-1970s. The enormous range of floral, geometric, and abstract designs make Studio Ware collectible in its own right. In the 1970s and 1980s as part of the Wedgwood Group Meakin produced contemporary products under the ‘Bull in a China Shop’ and ‘Creative Tableware’ names. ‘Sol’ (c.1912-1963), ‘Studio’ (1953 on) and ‘Royal Staffordshire’ (post 1968) were important J. & G. Meakin Ltd trade names. Meakin marks are numerous, but all include the J. & G. Meakin name. The significance of this item and pottery generally is that often earthenware is portrayed as being a landmark in the evolution of humanity. This is because these items are the few things from the past that have survived in a tangible form. Pottery is an important functional part of society and it has a critical role to play as it helps archaeologists to date other artefacts of the same time period. Also, the decorations on pottery have told much about the beliefs, lifestyles and lives of the people who bought them and used them. In other words it gives us today a snapshot of society from the past and how people used these items in their daily lives, their likes as well as societal and design trends. Earthenware white glazed ironstoneJ & G Meakin Hanley England stamped to base, with white flora designwarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, pottery, earthenware, iron stone, alfred meakin, james meakin, george meakin, earthenware manufactures, chamber pot -
Flagstaff Hill Maritime Museum and Village
Ceremonial object - Ciborium and Lid, Before 1855
Ciborium is the ancient Greek word for the cup-shaped seed vessel of the Egyptian water lily "nelumbium speciosum" and came to describe a drinking cup made from that seed casing. These vessels were particularly common in ancient Egypt and the Greek East. The word "'ciborium'" was also used in classical Latin to describe such cups. In medieval Latin, and in English, "Ciborium" more commonly refers to a covered container used in Roman Catholic, Anglican, Lutheran and related churches to store the consecrated hosts of the sacrament of Holy Communion. It resembles the shape of a chalice but its bowl is more round than conical and takes its name from its cover, surmounted by a cross or other sacred design. This ciborium is part of a Communion Set that was recovered from the wreck of the Schomberg in 1975 after 120 years in the sea. Five years later during the cleaning of the ciborium, a diamond ring was found secreted in the underside of the ciborium's lid. This ring has since come to be called the Schomberg Diamond and is also on display as part of the Flagstaff Hill Museums Schomberg collection. In 1975, divers from Flagstaff Hill (Peter Ronald, former Director of Flagstaff Hill, Colin Goodall and Gary Hayden), found an ornate communion set at the Schomberg wreck site. The set comprised a jug, the ciborium, a chalice and a plate. The ciborium remained untouched for a number of years before restoration began and the marine growth was removed. In 1980 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery at Flagstaff Hill. The collection also holds ship fittings and equipment, personal effects, a lithograph, tickets as well as photographs from the Schomberg. ABOUT THE SCHOMBERG (October 6 to December 27, 1855)- When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Baine’s Black Ball Line had commissioned her for their fleet of passenger liners. The Aberdeen builders designed her to sail faster than the clippers designed the three-masted wooden clipper ship to be fast. The timber used for the diagonal planking was British oak with layers of Scottish larch. This luxury emigrant vessel was designed for superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first-class passengers. The master for Schomberg’s maiden voyage was Captain ‘Bully’ Forbes. He drunkenly predicted at her launch that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons of cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The poor winds slowed Schomberg’s sail across the equator. She was 78 days out of Liverpool when she ran aground on a sand spit near Peterborough, Victoria, on 27 December; the sand spit and currents were not marked on Forbes’s map. The ship’s Chief Officer spotted the coastal steamer SS Queen at dawn and sent a signal. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers safely disembarked.This ciborium is significant as an example of an item in common use in the mid-19th century that is still in use today. It is also important for it relationship with the famous Schomberg Diamond that was discovered by accident, hidden inside it. The ciborium is particularly significant in that along with other items from the wreck helped in part to have the legislation changed to protect shipwrecks, with far tighter controls being employed to oversee the salvaging of wreck sites around our coast. This salvaged item forms part of the Schomberg collection at Flagstaff Hill maritime museum. The collection as a whole is of historical and archaeological significance at a State level. Flagstaff Hill’s collection of artefacts from the Schomberg is also significant for its association with the Victorian Heritage Registered Schomberg shipwreck (VHR S 612). The collection is of additional significance because of the relationship between the objects salvaged, as together they help us to interpret the story of the Schomberg. The collection as a whole is historically significant for representing aspects of Victoria's maritime history and its potential to interpret social and historical themes from society at the time of the wreck.Silver engraved Ciborium or chalice with lid, part of the five-piece Communion Set. The chalice is a round cup with a long stem and a floral-shaped base with embossed decoration. It has a matching round lid that comes to a rounded apex on top. Engravings on chalice feature flowers and a Fleur-de-lis pattern.flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, schomberg, 1855, clipper ship, james baines & co, black ball line, luxury ship, emigrant ship, captain forbes, bully forbes, ss queen, peterborough shipwreck, communion set, religious service, communion service, ceremonial service, mass, ciborium, chalice, schomberg diamond -
Flagstaff Hill Maritime Museum and Village
Leisure object - Doll's blanket, Gladys Angus, wife of Dr. W.R. Angus, 1930s
This doll's blanket was beautifully handmade by Gladys Angus, wife of Dr Angus. Gladys made it for her daughter’s doll, which was also donated along with its pram and a silk doll's dress. It is part of the W.R. Angus collection, donated by the family of Dr W R Angus, surgeon and oculist. The W R Angus Collection spans from 1885 to the mid-1900s and includes historical medical and surgical equipment and instruments from the doctors Edward and Thomas Ryan of Nhill, Victoria. Dr Angus married Gladys in 1927 at Ballarat, the nearest big city to Nhill where he began as a Medical Assistant. He was also Acting House surgeon at the Nhill hospital where their two daughters were born. He and his family moved to Warrnambool in 1939, where Dr Angus operated his own medical practice. He later added the part-time Port Medical Officer responsibility and was the last person appointed to that position. Dr Angus and his wife were very involved in the local community, including the early planning stages of the new Flagstaff Hill, where they contributed to the layout of the gardens. Dr Angus passed away in March 1970.This doll's blanket is connected to the history of Warrnambool, as it was owned by the daughter of Dr W. R. Angus and his wife Gladys. It is part of the W.R. Angus Collection, which is important for still being located at the site connected to Doctor Angus, Warrnambool’s last Port Medical Officer. Dr Angus and his wife brought their young family to Warrnambool in 1939 and he remained a resident until his death in 1970. Early in his profession in the town of Nhill, Dr Angus assisted Dr Tom Ryan in his pioneering use of X-rays and in ocular surgery, and Dr Angus later inherited these items. The W.R. Angus Collection includes these medical instruments and other related equipment and is culturally and historically significant as an example of the medical practice of the late 19th to the mid-20th century. Additional items in the collection relate to Dr Angus’ service in the Flying Doctor Service and the Army. The doll's blanket is also significant as an example of handcrafting in the early 20th century and represents toys made for and used by children in the Warrnambool community.The doll’s blanket is rectangular in shape. It has been hand-knitted in a decorative pattern using cream wool, and then embroidered with floral motifs. The blanket is lined with a hand-knitted blue rectangle. Gladys Angus made the blanket for her daughter’s doll. It is part of the W.R. Angus Collection.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, dr w r angus, dr roy angus, dr ryan, warrnambool oculist, port medical officer, mira hospital nhill, toy, nhill hospital, doll, silk doll's dress, gladys angus, embroidery, doll's blanket, handmade doll's blanket, knitted blanket, w.r. angus collection -
Flagstaff Hill Maritime Museum and Village
Equipment - Dentist Drill, Late 19th century
The design of this and other similar treadle powered dental engine (or dentist drill) was in common use by dentists from the 1870’s into the 1920's. When electricity became accessible to most communities the electrically powered dental engines began to take over from the treadle power. Over the ages teeth were extracted using picks and scissors and other gouging instruments. Bow drills, hand drills and even a "bur thimble" drill were later used to prepare cavities for filling. Some drills were made bendable by attaching flexible shanks between the metal bur and the handle, giving access to the teeth at the back of the mouth. Other mechanical devices were introduced along the way, such as clockwork drills, but they were hard to handle and inefficient. Over the centuries “dentistry has been performed by priests, monks and other healers. This was followed by barbers; the barber’s chair may well have been the precursor to the dental chair. “(SA Medical Heritage Society Inc.) In 1871 James Morrison patented the first commercially manufactured 'foot treadle dental engine', the first practica dental engine although others had been introduced as early as 1790 (by John Greenwood). Handmade steel burs or drills were introduced for dental handpieces, taking advantage of the significant increase in the speed of the drill. In 1891 the first machine-made steel burs were in use. The treadle drill reduced the time to prepare a cavity from hours to less than ten minutes. In 1876 the Samuel S. White Catalogue of Dentist Instruments listed a 12 ½ inch wheel diameter dental engine, with 14 bright steel parts, for sale at US $55 In today’s market, this is the equivalent to US $1200 approx. The specifications of that dental engine are very similar to the this one in our Flagstaff Hill Maritime Village’s collection. It is interesting to note that workings of a similar treadle dentist drill were used and modified to power a treadle spinning wheel of one of the volunteer spinners at Flagstaff Hill Maritime Village. The foot treadle dental engine was a milestone in dental history. “Historic importance of treadle powered machines; they made use of human power in an optimal way” (Lowtech Magazine “Short history of early pedal powered machines”) The invention of a machine to speed up the process of excavation of a tooth lead to the invention of new burs and drills for the handpieces, improving speed and the surgical process of dentistry. They were the fore-runner of today’s electrically powered dental engines. This treadle-powered dentist drill, or dentist engine, is made of iron and steel and provides power for a mechanical dental hand-piece that would be fitted with a dental tool. The drill has a three footed cast iron base, one foot being longer than the other two. A vertical C shaped frame is joined into the centre of the base, holding an axle that has a driving-wheel (or flywheel) and connecting to a crank. A slender, shoulder height post, made from telescoping pipes, joins into the top of this frame and is height adjusted by a hand tightened screw with a round knob. On the post just above the frame is a short metal, horizontal bar (to hold the hand-piece when it is not in use). A narrow tubular arm is attached to the top of the stand at a right angle and can move up and down. At the end of the arm is a firmly fixed, flexible rubber hose protected for a short distance by a sheath of thin metal. At the end of the hose there is a fitting where the drill’s hand-piece would be attached; a small, silver coloured alligator clip is also at the end. A treadle, or foot pedal, is hinged to the heel to the long foot of the base, and joined at the toe to the crank that turns the driving-wheel. There is a spring under the toe of the treadle. The metal driving-wheel has a wide rim. Touching the inside of the rim are four tubular rings that bulge towards the outside of the driving-wheel, away from the pole, and all meet at the hub of the axle. The axle is bulbous between the inside of the driving-wheel and the frame then passes through the frame and is attached on the other side. The driving-wheel has a groove around which a belt would sit. The belt would also fit around a pulley on the arm, at the top of the post. The pulley is joined to a rod inside the arm and this spins the drill's hand-piece and dental tool holder. The two shorter feet of the base are made from a long metal bar that has been curved outwards, and its centre is bolted to the base of the pole. Under the ends of the curved legs of the base are wedge shaped feet. The driving-wheel is decorated in light coloured paint on both sides, each side having three sets of floral decals evenly spaced around them, and each about a sixth of the wheel's circumference. Similar decoration is along the sides of the frame. The foot pedal has decorative cutout patterns in the centre of the foot and at the toe. On the long foot of the stand is some lettering with a fine, light coloured border around it. The lettering is hard to read, being a dark colour and flaking off. There are also remnants of fine, light coloured flourishes. The foot pedal has lettering of the maker’s trade mark cast into the metal at the ball of the foot. Lettering on the base is peeling and difficult to read. The foot pedal has a trade mark cast into it that looks like a combination of ‘C’ , ‘S’ , ‘A’, ‘R’. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dentist, teeth, dental drill, dental engine, treadle drill, foot powered drill, treadle engine, orthodontics, dental surgery, james morrison -
Flagstaff Hill Maritime Museum and Village
Domestic object - Dinner plate, William Adams, before 1863-1875
The Asiatic Pheasant pattern is a transfer design and was the most popular design of the 18th & 19th centuries and is still being produced today. The design was produced as high quality, decorative dinnerware by the potters in the Staffordshire area of England, from the late 1830’s, but no-one is sure exactly who the original designer was. This particular example was made by William Adams of Tunstall, Stoke-on-Trent, Staffordshire at the Greengates Potteries probably after or around 1863 and is believed to have been part of a passengers goods. The Adams family have a long line of making pottery since 1584 until 1966 when they were acquired by the Wedgewood group of companies. But this items pattern is attributed to the Adams potteries. History of the Loch Ard: The Loch Ard got its name from ”Loch Ard” a loch which lies to the west of Aberfoyle, and the east of Loch Lomond. It means "high lake" in Scottish Gaelic. The vessel belonged to the famous Loch Line which sailed many vessels from England to Australia. The Loch Ard was built in Glasgow by Barclay, Curle & Co. in 1873, the vessel was a three-masted square-rigged iron sailing ship that measured 79.87 meters in length, 11.58 m in width, and 7 m in depth with a gross tonnage of 1693 tons with a mainmast that measured a massive 45.7 m in height. Loch Ard made three trips to Australia and one trip to Calcutta before its fateful voyage. Loch Ard left England on March 2, 1878, under the command of 29-year-old Captain Gibbs, who was newly married. The ship was bound for Melbourne with a crew of 37, plus 17 passengers. The general cargo reflected the affluence of Melbourne at the time. Onboard were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionery, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were other items included that were intended for display in the Melbourne International Exhibition of 1880. The voyage to Port Phillip was long but uneventful. Then at 3 am on June 1, 1878, Captain Gibbs was expecting to see land. But the Loch Ard was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4 am the fog lifted and a lookout aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head-on into the wind, the ship lost momentum, the sails fell limp and Loch Ard's bow swung back towards land. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time the ship was among the breakers and the tall cliffs of Mutton Bird Island rose behind. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves subsequently broke over the ship and the top deck became loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of Loch Ard and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as Lochard Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael a passenger had raced onto the deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke the open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a complete state of exhaustion, he told the men of the tragedy. Tom then returned to the gorge while the two men rode back to the station to get help. By the time they reached Loch Ard Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost her family in the tragedy. Ten days after the Lochard tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of Lochard still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some items were washed up into Lochard Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced in March 1982. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton majolica peacock- one of only nine in the world. The peacock was destined for the Melbourne 1880 International Exhibition in. It had been well packed, which gave it adequate protection during the violent storm. Today the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artifact and is one of very few 'objects' on the Victorian State Heritage Register. The shipwreck of the Loch Ard is of significance for Victoria and is registered on the Victorian Heritage Register ( S 417). Flagstaff Hill has a varied collection of artefacts from Loch Ard and its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck of which the subject items are a small part. The collections objects give us a snapshot of how we can interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. Through is associated with the worst and best-known shipwreck in Victoria's history. Plate recovered from the wreck of the Loch Ard. Earthenware dinner plate with blue and white transfer design (Asiatic Pheasant) with a clear over-glaze. The outer rim is scalloped. Stickers with inscriptions "Rec 373 A" "L 102" "From Loch Ard Wreck (1878) - - -" Design logo [Floral wreath with ribbon and text "Asiatic Pheasant" and text below "- - - -"}flagstaff hill, warrnambool, flagstaff hill maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, asiatic pheasant, china dinner plate, earthenware plate, w adams potteries -
Flagstaff Hill Maritime Museum and Village
Ceramic - Chamber Pot, J & G Meakin, Early to mid 20th century
In the 19th and early 20th centuries, J. & G. Meakin were important, large-scale producers of good quality, ironstone tableware (‘White Granite’ ware) that met a ready market in the United States, South America, Australia, and other traditional British markets. By the 1890s the company was one of the world’s largest earthenware manufacturers. Although export teaware and tableware was the factory’s staple commodity, Meakin also manufactured toilet ware, kitchenware and a wide range of fancy earthenware. The company was amongst the first British pottery firms to experiment with modernist designs associated with the art deco period. The Moderne' range was introduced in 1929 consisting of an angular shape decorated design with geometric patterns and often highlighted with silver or gold. This range remained in production through the 1930s. Post 1945 the company introduced the streamlined Studio shape (1953) and Horizon shape (1955) both heavily influenced by the Russell Wright ‘American Modern’ tableware. In 1964 a new Studio shape was released with tall streamlined coffee pots used as the background for many contemporary patterns now associated with the 1950s and 1960s. Designs by Jessie Tate and Eve Midwinter, some originally found on Midwinter shapes, also appear on 1970s Studio ware. The Studio range was one of Meakin’s most successful and continued in production until the late-1970s. The enormous range of floral, geometric, and abstract designs make Studio Ware collectible in its own right. In the 1970s and 1980s as part of the Wedgwood Group Meakin produced contemporary products under the 'Bull in a China Shop' and 'Creative Tableware' names. 'Sol' (c.1912-1963), 'Studio' (1953 on) and 'Royal Staffordshire' (post-1968) were important J. & G. Meakin Ltd trade names. Meakin marks are numerous, but all include the J. & G. Meakin name. The significance of this item and pottery generally is that often earthenware is portrayed as being a landmark in the evolution of humanity. This is because these items are the few things from the past that have survived in a tangible form. Pottery is an important functional part of society and it has a critical role to play as it helps archaeologists to date other artefacts of the same time period. Also, the decorations on pottery have told much about the beliefs, lifestyles and lives of the people who bought them and used them. In other words it gives us today a snapshot of society from the past and how people used these items in their daily lives, their likes as well as societal and design trends. Chamber pot ceramic white with handle at side and decoration around top. Unclearwarrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, champer pot, personal hygiene, personal item, ceramic pot, domestic object -
Warrnambool and District Historical Society Inc.
Ledger, Cash Book, Circa 1917
This cash book contains entries relating to the farrier business of W M McCullough in Fairy St Warrnambool. It lists names and numbers of shoes replaced. It dates from January 1917 to march 1919 and contains many local names such as Sheldrick, Selby, Skuse, Horne and Saltau, to name a few.Listing many local people and being associated with a local business, it has social and historical significance. Green cloth covered card cover with maroon binding. Blue, maroon and white patterned inside covers. White paper label edged in floral design, pasted to front cover. 92 pages double numbered to page opening. Hand written entries to page 32 warrnambool, mccullough, mccullough farriers, warrnambool farriers, black farriers warrnambool, -
Warrnambool and District Historical Society Inc.
China, Cup & Saucer, Eary 20th century
This is a porridge set which probably dates from the early years of the 20th century. Porridge bowls and cups were particularly popular in Scotland at that time and would have been used in households in Australia throughout the 19th and early 20th centuries. These items have no known local provenance but are of interest as an example of the household china that was in use 100 years ago and was still being used for many decades after that time. They are attractive items and will be useful for display. These two items are a large cup and saucer made of china and used for porridge. The cup has colour floral and leaf scroll decorations inside the top rim, a piece of verse extolling the farmer and surrounded by black and white patterns, including farming implements, on one side of the cup and coloured farming implements in circles with the same verses in larger circles with a colour wheat sheaf in the centre on the other side of the cup. The saucer, more in the shape of a soup bowl, has the same colour floral and leaf decorations around the rim and the same farming patterns and verses in the centre. The handle has a black and white floral decoration The maker’s mark and name are on the bottom of the cup and saucer. ‘In God is Our Trust’ ‘The Farmers Arms’ history of warrnambool, porridge bowls -
Churchill Island Heritage Farm
Textile - Lace Trim, Section
This is a length of Leavers machine made lace trim (7.6 x 42cm). The body of the lace having no outline on the floral part is Valenciennes in style but with the hexagonal net and outline on the square pattern is Mechlin in nature. It is a fine example of a machine made lace which was very popular and sought after in the late 19th century as a preferred summer lace at the royal courts of Europe.The Amess family owned Churchill Island from 1872 to 1929. This lace collection was added to and refined over the course of three successive generations of women.Length of lace trim, with repeating floral and geometric designs. Shorter section, appears to have been cut from a longer length.lace, janet amess lace collection, trim, amess, churchill island -
Churchill Island Heritage Farm
Textile - Lace Trim
This is a machine made length of lace which has been executed in the Cluny style. Cluny lace is a bobbin style lace which is worked in a continuous piece and is heavily plaited in geometric designs. It is believed to have originated from copies of designs in the Musee de Cluny in Paris. There is a company in Ilkeston in the United Kingdom called The Cluny Lace Company which is still making both Cluny and Valenciennes lace using Leavers machines. The Mason family started making lace in the 1760s at the start of the Industrial Revolution. For two centuries the five generations of the family have paid close attention to detail and have brought the company to the forefront of new technology. Many of the lace patterns still used today were designed and draughted by Frank Maltby Mason and Francis Bowler Mason, the sixth and seventh generations of the family. They have developed a data bank of designs over this time and by combining the best of old traditions with new technology the firm is able to produce a wide range of exquisite designs of Leavers Cluny style lace allovers, edgings and insertions. This lovely insertion would be well suited to decorate a mob cap or on bed linen and nightwear.Churchill Island has a large lace collection, which was added to by three successive generations of the Amess family - Jane, Janet, and Unity. The Amess family owned Churchill Island from 1872 to 1929. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island. The examples of lace are notable for their variety, and provide respresentative examples of techniques from the late nineteenth to the early twentieth centuries. Length of machine made Cluny-style lace trim with repeating diamond pattern on the border, and a central geometric/floral motifchurchill island, lace, janet amess lace collection, machine, amess, cluny -
Churchill Island Heritage Farm
Textile - Lace Piece
This lace appears to be a beautiful product of the Leavers lace making machine. It is Valenciennes in style which is a bobbin lace characterized by the diamond shaped net. Unlike comparable Mechlin lace it does not have a gimp thread outlining the pattern. Valenciennes lace originated in France but perhaps due to religious persecution later moved to Ypres in Belgium and was very popular in the 18th century. It was simpler to produce than Mechlin lace and was never used on expensive garments but reserved for bed linen, lingerie and the fichu. By the 19th century it was made by machine which made it cheaper and even more accessible.Churchill Island has a large lace collection, which was added to by three successive generations of the Amess family - Jane, Janet, and Unity. The Amess family owned Churchill Island from 1872 to 1929. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island. The examples of lace are notable for their variety, and provide representative examples of techniques from the late nineteenth to the early twentieth centuries. Machine made Valenciennes lace with a floral design on a fine mesh background, and one scalloped edge.lace, churchill island, janet amess lace collection, amess, machine -
Churchill Island Heritage Farm
Textile - Lace Trim
Whether machine made or handmade, this length of trim is dainty and delicate in the true Valenciennes style. Circles surrounding six-petalled flowers with little spiders above and below where the circles meet, it is quite beautiful. The diamond ground is typically Valenciennes as is the pattern of flowers. Valenciennes was a lace making town on the French- Flemish border which in 1780 had 4000 lace makers but due to the revolution of 1789 the number was reduced to 250. It was initially Flemish but was claimed by the French, however the centre for Valenciennes lace eventually diverted back to Ghent and Ypres in Belgium. Due to its lightness and neatness Valenciennes lace, although very expensive was simpler to produce than Mechlin lace, and was never used for expensive garments. Instead it was applied to bed linen, lingerie, and the fichu (a woman's scarf wrapped over the shoulders and fastened in front).This lace was favoured by Queen Victoria, the Empress Eugenie and others as a trim on undergarments. The basic undergarments were stays, shift (smock, chemise or shirt), petticoat and drawers although drawers were not in general use until the mid-19th century when the tendency of the fashionable crinoline to become airborne or to tilt itself at embarrassing angles made a covering garment for the nether regions essential. Drawers were just two cylinders for the legs, joined at the waist with the lower ends frilled or trimmed with lace. This trim is also suited to trimming a mob cap.Churchill Island has a large lace collection, which was added to by three successive generations of the Amess family - Jane, Janet, and Unity. The Amess family owned Churchill Island from 1872 to 1929. Jane was wife of Samuel Amess, who was the first Samuel Amess to own Churchill Island. The examples of lace are notable for their variety, and provide representative examples of techniques from the late nineteenth to the early twentieth centuries. Valenciennes lace with floral motifs with six petals enclosed within a circular motif.janet amess lace collection, lace, churchill island, janet, amess -
Churchill Island Heritage Farm
Textile - Lace Trim
A broad and luxurious lace this length would be a beautiful trim on a lady’s gown. It appears to be a copy of a Carrickmacross Irish lace where - when handmade - the motifs are embroidered onto a muslin and net sandwich and the excess muslin is cut away. This 142.5cm length however is machine made and was very likely made on a Leavers machine which was another adaptation from John Heathcoat’s machine with the Jacquard patterning device being adapted to it in the 1830s. It was developed by John Levers in Nottingham but the ‘a’ was added to the name for ease of pronunciation in France. The Leavers machine is one of the most versatile of all machines for making patterned lace and Leavers lace was Nottingham’s chief lace product until recently.The Amess family owned Churchill Island from 1872 to 1929Length of lace trim with scalloped edge and straight selvage edge, floral design on net ground. Machine madechurchill island, lace, janet amess lace collection, trim, amess -
Coal Creek Community Park & Museum
Tableware Set, Meakin, Alfred
Alfred Meakin 'Haven' pattern tableware set of 2 oval platters, 2 covered and 2 handled circular dishes and 1 gravy boat. Gravy boat with high handle and wide spout. White ground with gilt outline geometric and floral design in blue, green and yellow.Green glazed on base 'Alfred Meakin / England'. Indecipherable and then in black glaze 'Haven'. In gilt '9, 14, 18 & 12'. -
Coal Creek Community Park & Museum
Butter Cover
Base is a square plate decorated with yellow rim, red stripe and flowers in each corner. Cover has a larger picture of the floral decoration on one side, lace decoration right around meeting a front and rear to small flower pattern, coloured orange, green, red, yellow and black. PM. Moschendorf. Bavaria. 19