This RAAF uniform is believed to have belonged to Flying Officer Russell Miller, the son of William and Muriel Miller of Warrnambool. Russell Miller attended Warrnambool High School and worked for the Warrnambool City Council before enlisting in World War 11. He was killed in flying operations over Germany in 1944. Died 28 Sept 1944. Remembered at Rheinburg War Cemetery, Nordrhein-Westfalen, Germany. More info @ https://cwgc.org/find/find-war-dead This uniform is a poignant memento of one Warrnambool's brave heroes of World War 11.1 The jacket is made of navy blue wool with a rever collar, four front pockets, eight buttons with air force insignia and navy cloth lining. The two sleeves have metal insignia and black and cream braiding. Above the front left pocket is a stitched blue and white applique. The jacket has a cloth belt with a rusted metal buckle. .2 The trousers are made of navy blue wool with two pockets, a buttoned fly and there are six buttons evenly stitched around the waist band. There is also a metal clasp on the waist band. RAAFraaf, flying officer russell miller, raaf uniform 1940's

The buttons relate to tailors in Warrnambool and District and some are stamped with relevant names. The collection provides a good sample of buttons and the types of materials and uses which were prevalent in the period. Rows of buttons in colours black, brown, fawn, silver, white, and Mother of Pearl. Mounted on cream card and framed with cream mount. Rows are labelled with small card inserts with names of local tailors and/or application and uses. Materials used are metal, bakelite, shell and fabric.The metal buttons have names of tailors stamped into them and bakelite buttons are either stamped or have raised lettering or symbols. Names on buttons as follows: Cramond & Dickson, Youngers, Warrnambool, W. J. Taggart, S Taggart, Fletcher Jones, W. A Burnett, W McDonald, Thompson Terang, R Carey, J Torrance Camperdown, F Williamson, Salvation Army. Types of buttons : Military, Navy, coat, vest, boot and shoe,shirt, trouser, coat, Pearl shell, linen, and fabric covered.warrnambool, buttons, cramond and dickson, youngers, w.j. taggart, burnett mcdonald thompson, terang williamson, j. torrance, fletcher jones, warrnambool military

This picture shows a group of people outside of a weatherboard house. There are four persons sitting on a metal seat. Two male and two female. Both boys have a boat neck collar on their shirts and button up boots on. One girl has a light coloured dress with a money purse across one shoulder, her hair tied up with a ribbon. The older girl has white uniform on with watch hanging from the bolice, her hair is up. A youth is standing leaning on the house with his thumbs in his vest holding a whip. He has on foot resting on the seat and is wearing short pants and boots. Standing behind the seat is a large framed women wearing a dress with her hair up and a man wearing a suit with facial hair, hands behind his back. To the side another youth with his hands in his pants. Next to him another man with his hands behind his back, dressed in a suit with facial hair. Lace can be seen on the windows.Shows a typical family and housing of the period.Black and white rectangular picture post card.In black ink, stamped on back "Post Card, Correspondence, Address. Written in black ink " Robert Oman, Clifton, Jack, Roy, Jean, Gladys, Evelyn, Father John, Mother. R Oman 5 Locjhart Ter Edwardstown SA". In blue pen "Dos Dunn".

From the estate of Elsie Cooke. Elsie Cooke was a librarian in Orbost for many years. She was the daughter of John Cooke early Brodribb settler. Elsie Cooke lived all her life in Gippsland,. She was born at Brodribb in 1895 and died in 1970, Elsie Cooke lived at Bruthen for a short time and, in 1937, moved to live with her aunt, Miss Jean Munro. Miss Cooke was Librarian at the Mechanics Institute for many years. Kindness and consideration for other were Miss Cooke’s attributes and she endeared herself to all who knew her. She was a loyal member of the Presbyterian Church and a stalwart of the Ladies’ Guild, an energetic worker for the Municipal Auxiliary and a member of the Red Cross. (ref. Mary Gilbert) Owned by a local Orbost woman's family. Silver-plated watch fob, with two blackened silver double chains connected to a small clasp at base and a t-piece of silver-plated metal at the top for the button hole. Approximately 20cm in length.watch fob, silver chain, pocket watch, 1900s, elsie cooke

It is possible that this hat button was originally a shank button from a British World War One army tunic. Metal hat pin. Brass bobble on end shows British coat of arms.On back of button : Smith & ??? - Bir..........( possibly Smith & Wright -Birmingham)hat-pin hair-accessories

These were probably worn by a young girl as most girls wore side-button boots while the boys wore front-laced ones. The buttonhook was used to facilitate the closing of shoes, gloves or other apparel that uses buttons as fasteners. To use, the hook end is inserted through the buttonhole to capture the button by the shank and draw it through the opening.This item reflects the footwear fashion worn by children in the late 19th to early 20th century.Two small black leather boots. They are side buttoning boots with seven buttons (left boot is missing two). The button hook is metal.On sole : size 6footwear shoes boots

This MEZON brand button accordion was made specifically for Lyons, Musical Instrument Importer, 207 Bourke Street Melbourne, as can be seen on the embossed lettering on the top of the accordion. The hand inscribed nameplate indicates that the owner was T H Betts. On August 19th, 1903, Michael Edward Lyons applied to the Trade Mark’s Office of Sydney for registration of “The Invented word “MEZON” to be applied to musical instruments. In 1908 he was advertising himself as sole agents for MEZON accordions. He had been at that address for 15 years (since 1893) and was moving to larger premises at 256 Bourke Street, Melbourne. Still at this address in 1925, Lyons advertises MEZON accordions as “The ideal Xmas present, Maker your friends happy, This Xmas let the Present be a MEZON”. There was a choice of three styles: The Organ, The Wonder and The Grand Organ. They came with a Fibre Case with Lock and Key and a Leather Handle. The promise was “They Give Satisfaction”. They were obtainable at all stores or from Sole Distributors in Australia. In 1927 the MEZON was sold by Albert & Sons in Western Australia, Victoria, New South Wales and Queensland as well as by Lyons in Melbourne. The favoured German accordion brands were Monarch and Sterling, which were made by the International Accordion Company in Leipzig, Saxony, Germany. The company was founded in 1871 by Ernest Deines and made a variety of musical instruments. The company closed business in 1834. The International Accordion Company’s accordion range made the International brand and others such as MEZON, Globe, and Dienst. Australia imported the MEZON brand. American companies imported a range of the popular German branded accordions until World War II, when they were no longer available. In general, accordions produced after the war were not as high a quality and not loud enough to be heard over the electronic guitars and the drum kit of the bands. This accordion represents the type of musical instruments used in the late 19h and early 20th century, locally and Australia wide. In colonial Australia musical instruments like this one were imported from Germany as well as other countries. At that time, German made instruments represented good quality. This accordion is significant for being especially imported into Australia by a Melbourne retailer. Music was a part of family and social life, associated with dances, song and general fun.Button accordion with case. Accordion with steel reeds, three bass valves and ten treble valves. It is coloured black with very dark green trim, decorative silver metal reinforcing on main corners, gold reinforcing on corners of the bellows and delicate printed, gold printed patterned trims. Hand support for buttons is made of fabric. Folds of the bellows are light coloured with fine dark pattern. It has a nameplate on the front. Black wooden case has red lining, two brass hinges, two brass hook and eye catches and a swivel brass lock. The base of the case has a loose brass fitting. The top has a thin metal handle. Inscription on hand inscribed name on front, label inside case lid, silver reinforcing, leather on bellows top, and frame of accordion. Manufactured with the brand MEZON in Saxony, Germany, for Lyons of Melbourne. Once the property of T H Betts.Printed on label “MEZON ACCORDEONS.” Impressed in metal corners and reinforcing “MEZON” with logo [circle enclosing entwined capital D and E] “MADE IN SAXONY” Embossed in gold on frame “Made in Saxony”, “MEZON Accordion/ manufactured for LYONS / MELBOURNE, Bourke Street” Name inscribed by hand “T H Betts”flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, mezon accordion, lyons, made in saxony, t h betts, betts, mezon, squeeze box, musical instrument, button accordion, germany, michael lyons, international accordion company, ernest deines, circle enclosing d e, d e, e d, german accordion

This Australian Comforts Fund badge is part of a set of eleven badges collected from the 1920s to the 1940s by Dr W. R. Angus. The badge was sold by the ACF in 1940 to raise funds for gifts to send to the Australian troops serving overseas. The badge is one of a set of badges that represents various organisations that he had interests in. The Australian Comforts Fund was a mostly female, volunteer-run organisation officially recognised by the Government. It began in 1916 as an amalgamation of groups of people who wanted to support the Australian troops abroad with Items of comfort to supplement the essential items provided by the Australian Military Forces. The ACF raised funds to purchase goods, pack them and send them overseas. One of their fund-raising activities was 'button days' where buttons such as this one were given to those who gave donations. The ACF closed down after World War I but was re-formed at the start of World War II. Items that the ACF sent to the troops included personal toiletry items such as toothbrushes and toothpaste, magazines, pyjamas, singlets and socks. They also provided sporting equipment, recreational music, writing materials and postcards. Special hampers were sent to the troops at Christmas time. The maker, P J King, (Percy John King), originally established his engraving and ie casting business in Russell Street, Melbourne in 1893 in partnership with Charles Walder Bridgland, continuing on his own from 1899. Percy and his son John Howard King set up a new business P J King Pty Ltd in 1928 making uniform buttons. In the late 1980s, it merged with two other companies that then became J J Cash, now known as Cash's Australia. The set of badges was donated to Flagstaff Hill Maritime Village by the family of Doctor Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” which includes historical medical equipment, surgical instruments and material belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) and Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. The W.R. Angus Collection: - The W.R. Angus Collection includes historical medical equipment, surgical instruments and material belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) and Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. It includes historical medical and surgical equipment and instruments from the doctors Edward and Thomas Ryan of Nhill, Victoria. Dr Angus married Gladys in 1927 at Ballarat, the nearest big city to Nhill where he began as a Medical Assistant. He was also Acting House surgeon at the Nhill hospital where their two daughters were born. During World War II He served as a Military Doctor in the Australian Defence Force. Dr Angus and his family moved to Warrnambool in 1939, where Dr Angus operated his own medical practice. He later added the part-time Port Medical Officer responsibility and was the last person appointed to that position. Dr Angus and his wife were very involved in the local community, including the planning stages of the new Flagstaff Hill and the layout of the gardens there. Dr Angus passed away in March 1970.This badge represents the efforts of the women volunteers in Australia to support the Australian troops overseas in WWI and WWII. This badge is one of a set of significant badges that connects Doctor Angus with Australian organisations of the early-to-mid 20th century, including those relating to military service support. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The Collection includes historical medical objects that date back to the late 1800s.The ACF Badge is a star-shaped, gold, glittered red enamel and metal badge. The star has six points. The enamel surface is textured. The border and front inscription of the badge is gold. It is the badge of the Australian Comfort Fund, made by P.J. King and dated 1940. This badge is part of a set of badges collected by Dr W R Angus. the set represents organisations that he was involved in, and is part of the W.R. Angus Collection.Front: “ACF / 1940” Reverse embossed “P.J. KING”flagstaff hill, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, metal badges, enamel badges, organisation badges, acf, presbyterian brotherhood, oikumene, w.r. angus, flagstaff hill maritime museum and village, australian comforts fund, button day, volunteer, australian military forces, christmas hamper, 1940 acf badge, fund-raising, p j king pty ltd, percy john king, donor's badge, world war ii, 1939-1945, australians at war, voluntary work, volunteers, home front, w.r. angus collection

This model of camera was made between 1946 and 1957. (http://www.brownie-camera.com/71.shtml)Morocco-grained imitation leather covered metal body with two brilliant finders. Plain matt enamel front; metal wind knob and release button with a single blade shutter. (http://www.brownie-camera.com/71.shtml) This camera took box rollfilm, with 629 film size. The picture size was 2 1/4 X 3 1/4" .(http://www.brownie-camera.com/71.shtml) Instruction books for this model are available at http://www.brownie-camera.com/manuals.shtml camera, photography, brownie, kodak, box brownie, photographic equipment

The inscription "T L" on these early 20th century ladies button-up boots lead to the maker likely to be Tony Lama, a famous USA boot manufacturer, son of Italian immigrants. The "Rome" is the style of boot. The "6" is likely to be the soot size. Tony Lama began work at age 11 years in the leather trade industry, serving an apprenticeship as a shoemaker. He joined the US Cavalry when he was 16, after lying about his age, working as a cobbler to make boots for the soldiers. His workmanship became popular, particularly for the 'Western' style of boot. TONY LAMA boots In 1911 Lama established a company in Texas, first repairing boots, then adapting his shop to manufacture boots in order to meet the many orders he was receiving. He married and he and his wife Esther brought up six children who also went on to work in the family business. The business continued to grow through WWII. Part of the business included custom boot making and Tony's eldest son Joseph presented President Truman with a pair of kangaroo skin boots. The prosperous business became a company and eventually, in 1990, was sold to Justin Industries.This pair of boots is an example of women's footwear dating around the early 20th century. Pair of ladies leather button-up boots. Two-tone style: black bottom strong leather bottom and white, soft kid leather top. Boots have a curved fly fastened by 11 white buttons with metal shanks. Boots are constructed with cork filling. Inscriptions of both boots. "6 101" "TL" " Rome" "Cork Filled"flagstaff hill, warrnambool, maritime-museum, shipwreck-coast, flagstaff hill maritime museum & village, ladies button up boots, footwear, victorian era, granny boots, tony lama, ladie's boots, ladies' fashion, women's clothing, rome, kid leather, two-tone boots, leather boots, button-up boots

This cable tram Gripman’s badge, or driver’s badge, was part of a tram driver’s uniform. The inscriptions on the front of the badge identify it as belonging to Gripman number 14, at the South Melbourne Car House depot of the Tramways Board. The Gripman Badge would be re-issued whenever another Gripman takes over the position. Cable trams were invented in America in 1873. In Melbourne, cable trams were in use from 1885 until 1940, with a network of up to 1200 cable cars or 'dummies' and trailers travelling at around 9.5 miles (15km) per hour along 46 miles (74km) of double tracks. The Gripman drove the dummy car, operating the heavy levers to connect the gripping gears to the cable installed in a slot in the road. To turn at intersections he would skilfully disconnect, freewheel around the corner and carefully reconnect to the continuously operating steel cable. Large winding gears in an Engine House along the line pulled the cable along, powered by steam engines and later electric engines. The gripping gears were in the centre of the car's floor with seating all around the sides, a dangerous place for curious children. , whose worried parents would guide them into the tram that was towed behind the dummy car. The Melbourne Tramways Board operated the cable trams between July 1916 and November 1919 after taking over from the privately operated Melbourne Tramway and Omnibus Company. In 1919, the Melbourne and Metropolitan Tramways Board (MMTB) took over the Tramways Board. Stokes & Sons: - The maker of the badge, Thomas Stokes, migrated to Melbourne from Birmingham in 1854 and set up business in Mincer Lane as a die-sinker, producing medals, tokens, buttons and silverware, and an engraving service. He moved to Flinders Lane in 1856. After a time, in 1894, the business became Stokes & Sons Pty: Ltd, electroplates and badge makers at Post Office Place in Melbourne. The maker's mark 'Stokes & Sons' was made on badges until 1962. LOCAL CONNECTION: -t was common practice to recycle the used cables from the tramway. For example, the Wollaston Bridge in Warrnambool, Victoria, is suspended by recycled cable tram Melbourne. (Other recycled cables were used for fencing wire.) -Portland's cable tram is an example of the cable trams used in Melbourne from 1885 to 1940.This badge was used to identify a Gripman who operated a cable car tram's dummy car for the Tramways Board in Melbourne between 1916 and 1919. It represents the need for people to be able to identify workers in the service industry, a need still addressed today by staff ID badges and digital identification. The badge also represents the period in Melbourne's history when cable cars were used for public transport for over four decades, gradually changing from steam to electric power. Trams still have an important role in Melbourne's public transport. Badge, round hollow metal dome with two open metal guides on the back. A cable tram Gripman (driver) badge with embossed inscriptions on the front and stamped on the back. There is a logo of entwined letters T and B on the front. It identifies Gripman number 14, South Melbourne, Tramway Board. It was made by Stokes & Sons of Melbourne. Impressed into the front: "S / 14 / M" "GRIPMAN" Logo intertwined "T" and "B" Embossed on reverse "STOKES &o SONS"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, badge, gripman, stokes & sons, numesmatics, tramway, tram, tram driver, uniform, cable tram, identification, cable car driver, tramway board, south melbourne, melbourne tramways board, tb, mtb, mmtb, melbourne and metropolitan tramways board, tramway button, gripman button, id, identification badg, staff badge, name badge, employee, grip car, dummy car

First State Watch Factory: This factory was founded in 1930 under orders from Joseph Stalin, the "First State Watch Factory" was the first large-scale Soviet watch and mechanical movement manufacturer in the USSR. Via its USA-based trading company (Amtorg), the Soviet government bought the defunct Ansonia Clock Company of Brooklyn, New York in 1929, and the "Dueber-Hampden Watch Company of Canton", based in Ohio. The soviets moved twenty-eight freight cars full of machinery and parts from the USA to Moscow in order to establish the factory. Twenty-one former "Dueber-Hampden" watchmakers, engravers and various other technicians helped to train the Russian workers in the art of watchmaking as part of the Soviet's first five-year plan. The movements of very-early products were still stamped "Dueber-Hampden, Canton, Ohio, USA" (examples of these watches are very collectible today). In 1935 the factory was named after the murdered Soviet official Sergei Kirov. During the second world war, as the Germans closed in on Moscow in 1941, the factory was hurriedly evacuated to (Zlatoust USSR). By 1943 the Germans were in retreat, and the factory was moved back to Moscow, adopting the "First Moscow Watch Factory" name. In 1947 the first wristwatches under the brand name "Pobeda" and the first Marine Chronometers and Deck watches were produced. By 1951 the production of wristwatches had increased to 1.1 million. In 1975 new machinery and equipment for manufacturing complex watches were imported from Switzerland. The first chronograph called "Okean" (3133) was produced for the space station "Soyuz-23."The Chronometer is of recent manufacture and an excellent example of the type of instrument used to navigate the seas in the 19th century. It is of good quality and of a type regarded as very accurate and well made. The maker, First Watch Factory, has a dept that is still producing the "8916" standard Chronometer for horologists and collectors. Marine chronometer of Russian make in wooden case, metal handles on sides, inscription on a metal plaque on the front of the case. Polished square wooden outer case with green felt lining and, a leather carrying strap and buckle. Outer case is hinged and has a metal latch on the front. Outer case has a red velvet covering with a button and loop closure. Inscription on box are in Russian & translate as follows: ХРОНОМЕТР, = CHRONOMETER МОРСКОЙ, = NAUTICAL ГОСТ, 8916-77 = Gost ЛОЛ ЕТ, on dial face = LOL ETflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, chonometer, russian, watch factory, marine, navigational instrument

In the 19thC and early 20thC men often wore their shirts for a week or more. However the collars were detachable so that they could be changed when they became dirty or for special occasions eg Church on Sundays Collar studs were used to attach the collar to the shirt. The leather box was used for storage and when travelling. The collars were very stiffly starched so as to maintain their shape.The Blackburn family were early settlers in Moorabbin Shire4 x mens white, stiffly starched, detachable collars and 2 x brass studs with the leather box used for storage and transport of these items. Each collar has 3 button holes - 2 at neck and 1 centre back for attachment to the shirt. The Leather box has saddle stitching and a strap with a metal buckle for securingInside collar : a) Radiac / 0 2639 - 16 / ALL COTTON / MADE IN IRELAND; b) LAUNDRY / FOR BEST RESULT DIP / IN THIN COOKED STARCH/ Semi / 161/2 ; c) nil d) nilmenswear, clothing, shirts, collars, early settlers, fashion, cheltenham, moorabbin, dairy farmers, market gardeners

Pocket Watches became popular in the late19th C. Gentlemen put their 'Fob' watch in their waistcoat pocket attached to a chain that had a bar that slipped through a button hole. Ladies attached their Watches by a chain to their chatelaine. Nurses usually used a bar with a pin to attach the pocket watch to their uniform. All Train Conductors had a Fob Watch to keep check of the Train Timetable.This small silver plated pocket watch with a hinged case has a white enamel dial with black Roman numerals, a seconds dial at 6 and black metal hands.unreadable on back of Casebrighton, moorabbin, pioneers, watchmaking, jewellers, market gardeners, early settlers, craftwork, watches, clocks

The inclusion of 2 Turkish buttons and the possibility of the belt itself being Turkish seems to indicate that the belt was obtained at Gallipoli. As some of the other badges and buttons are not of Australian origin, the indication is that they were traded during the owner's service.This item is significant in that it has original badges and buttons from uniforms of WWI. The person to whom this belt belonged obviously served at Gallipoli and returned from active service. brass button bearing the insignia of artillery, 2 brass buttons bearing a crescent and star, 1 bearing the outline of Australia with a crown above, 1 plain copper button and 1 brass button bearing the picture of a hand grenade.Belt: Webbing, 2 metal buckles with 2 leather ends and tongues and a leather pocket stitched 7.5 cm from the tongue end. 29 cm from the buckle end there is what is possibly a leather canteen hook, 2 cm wide, 17 cm long, with a copper escutcheon which hooks over a brass knob . Three stripes, top and bottom stripes blue, middle stripe khaki. Pinned to the buckle end of the belt are 5 copper badges: INF / RGA / / 4 / LH and a small crown and 3 brass badges TYNESIDE / 4 / SCOTTISH. On the tongue end are 2 brass buttons embossed with crowns, 1 world war one, anzac, ww1, gallipoli, badges, buttons, uniform belt, turkish uniform, turkish, british badges, tyneside scottish

Camisole. Round neck,edged with cut work lace. V shaped panel below the neckline, made with alternating bands 2.5cm wide, of cut work and woven lace five on one side , four on the right hand side. Cotton high neck. Deep Vee lace front 5 buttons, metal, covered with fabric(one missing). Bodice gathered onto a waistband at front, three back panels join waistband at back. Hand stitched button holes.costume, female, underwear

Cotton Camisole. Yoke front and back of hand crocheted cotton joined to a cotton lower section in a scalloped shape. Yoke straight across back but dips in a V shape almost to the waist in the front. Provision for ribbon insertion at the sleeve edges and neckline. Bodice gathered onto a fine waistband and peplum. Two small fabric covered metal buttons and one pearl button.Written in pencil and biro nside peplum. 'BHS'costume, female, camisole

Clothing. One pair of shoes. Ivory coloured cotton canvas. Size 3, marked on sole of right shoe. Instep straps fastened by buttonhole to shanked round metal buttons. Low wooden heels. Decorative ''button'' stitched centre front of shoe.Wedding dress and shoes were worn by Mary Smith for the marriage to John Keane 6th August 1902, at the Roman Catholic Church, Wycheproof. Mary Smith was the daughter of Felix Smith. He built the Wycheproof Court House, Post Office and Royal Mail Hotel. Mary and John Keane lived in a mud brick house after their marriage. See also 11400.76 & 11400.75costume, female, wedding shoes

Ladies brown satin bodice with green satin pintucked insert in centre front. Front opening with a row of 17 buttons and button holes on either side of the centre insert. Buttons are brown metal with diamente centres-long sleeves tapered at wrist. Small mandarin collar with press stud fastener at front. Boned at front and side seams. Fishtail back with green satin flaps. Bodice lined with yellow, green and red striped cotton.costume, female, bodice

Clothing. Gentlemen's boating suit (Trousers), cream cotton with fine black/grey pinstripe. Cuffed trousers. 1 rear pocket. Button fly - 2 buttons. Six buttons on waistband - probably to attach braces. One button on rear pocket - all marked AM POOL BENDIGO.Rear adjustment tab with metal buckle. Note: suit jacket bears the label A.M.POOL, BENDIGO. Two pockets at front side seams. Trousers do have tapered legs.A.M.POOL BENDIGO marked on buttonscostume, male suit, trousers

Heavy white cotton lace dress. High round neckline with cotton drawstring ties. 6cm lace collar with scalloped edged. 7cm cap lace sleeves with fine scalloped edges. Casing at the waist with cotton ties to back. Back opening from neck line to 9cm below waist. Cotton tie at neckline at back. Two x 1cm white buttons spaced at 6cm and 12cm below neck. Hemmed edges of lace form the edges of the back opening. Two machine stitched button holes on RHS with 4.5cm layer of lace covering the button holes. LHS of opening is plain. Lace skirt made of single piece of lace fabric gathered at the waist. Seam at centre back. Skirt 31 cm. Scalloped edges dipping to V shapes. 5mm cotton ties at waist and neck go through metal ties. Machine stitched.costume, children's, infant boy's dress

black and white photo: Rt. Rev. Donald Baker, 3rd. Bishop of Bendigo 1920 - 1936. View of bordered by oval surround. Figure wears high buttoned collarless jacket, clerical collar, metal rimmed spectacles, clean shaven. On back ' Rt. Rev. Donald Baker, 3rd. Bishop of Bendigo , 1920 - 1936 'person, individual, bishop baker

Object. Masonic apron of white kid leather with ted leather backing & a silk border in red & blue stripes. Decorated with 3 rosettes in red 7 blue with button in centre. Waistband with metal clasp in shape of snakes.societies, freemasons, regalia, f. g. jones collection, masonic regalia, masonic apron

Object. 1 - Masonic apron made of kid leather with border of watered silk ribbon in the various colours of the rainbow. 3 roundels of water silk with a button in the centre. Backed in red leather. Metal clasp in the shape of snake. 2 - Masonic sash of watered coloured silk, plaited silver band 15cm from end of sash with silver rosette, silver fringe on each end of sash.societies, freemasons, regalia, f. g. jones collection, masonic regalia, masonic apron & sash

Green detecting set - Comprising of : Metal Case.Square detecting plate / Coil / loop; Detector wand battery pack and insert, detector unit earphones,spare amplifiers. Tin w/spare ear pins.Battery pack no Batteries Detector unit cover, probe assembly.Lithium button cells - removed.Detecting Set mine, model P 158. Serial Number 9686, Purchase order CB / 94236,MFR Name Polan Industries inc.FSN 6665 - 966-9071. Insert top /FSN 6665-991-0012 /Detecting set mine /Group 1 /size 15 /MFG Part NO COO- 0309 US property 6665-00-966-9871 Red caution sign on bottom.detecting set.

Rounded Odd looking hole in the end of it ButtonEveready Made in hong kong

Clothing. High round neck at back, with peaked revers at front. Press-stud closure at centre front, with three grey plastic buttons sewn to outside.(two missing). Button is impressed with a circular pattern. Short sleeves. A 4 cm wide panel increasing to 5 cm at centre front is set into front waistline, and extends into a belt at the back-3.25 cm wide and fastening with a metal press-stud. Six gored skirt. Almost certainly home stitched, as several dresses in the collection are of similar style. An oval shaped patch, 16 cm X 8.5 cm has been hand stitched immediately below the centre front waistline. A home stitched dress.costume, female, floral print dress

Clothing. Cream kid-leather bound on sides and lower edge with a 5 cm wide light blue grosgrain ribbon,mitred at the lower corners. A Vshaped flap, edged on the Vshape, with a 4 cm wide blue ribbon, and attached to the apron at the top edge with a 4 cm wide blue ribbon, folded in half over the top edge. A blue rosette of the ribbon is attached to the centre of the flap, and there is a blue rosette at each side of the lower edge- all are attached by a 1.5 cm diameter blue silk covered button. A blue, 3 cm wide elastic, with silver coloured hook fastens the apron to an elastic held, silver coloured metal loop fastener.Harvey C.Smith Pty Ltd,. 57 Swanston St., Melbourne. MASONIC REGALIA SPECIALISTS.costume, male, lodge apron

Clothing. Navy blue velvet, on a brass frame, with a 34 cm long brass chain. A ''push-button'' 1.2 cm diameter, fastens the bag. A decorative, oval brass loop is attached to the centre of the frame. The velvet fabric is tightly gathered onto the frame. One side panel of the bag is exquisitely embroidered in a ''corded'' floral design, in pink, blue and greens. The bag is lined with a smokey blue watermark silk, with a flat pocket on one side. The bag contains a smokey blue pouch 7.5 cm square, holding a bevelled edge mirror on one side, and a pouch on the other, a blue nylon comb, two metal hair pins and a 5.5 cm long hat pin. with a pearl bead at one end.costume accessories, female, navy blue velvet embroidered bag