Map was used by Alan Mitchell-Lapin during patrols with Commando Regiment. Alan Mitchell-Lapin is a resident of Woodend.Alan Mitchell-Lappin is a member of the Woodend RSL who served with the Commandos in Afghanistan. Alan was awarded a Commendation for Gallantry for his service in Afghanistan. The map was utilised by Alan during his patrols.Patrol map for South Western Orguzgan Helmand and Kandahar Province’s. Scale 1:200,000. Produced by Australian Government Department of Defence Intelligence and Security. Table top right -Military Legend. Tables middle right - Language distribution, and translation glossary. Table bottom right hand corner - Topograhic Legend. Table centre bottom - Grid magnetic Diagrams. Table top left corner - Tarwin Kowt weather infromation.Produced by the Defence Imagery and Geospatial Organisation, Geospatial Analysis Centre, September 2009. Restricted at time of issue.afghanistan, map, orguzgan, helmand, kandahar, operation slipper, mitchell-lapin, 2009, digo 0098-0910, commando, special forces

Apron manufactured for military purposes. This item has significance as an example of uniform likely worn ny nurses and/or other medical staff, associated with Australian military campaigns. White fabric apron. One piece comprised of fabric square, white cotton bib, convex shaped side flaps, and square shaped lower apron with rounded corners. Fabric edges are folded over and hemmed with white thread in straight stitch, 5mm distance from edge of apron. Underside is overlocked with white thread. Top of bib is attached to a white fabric neck loop near bib corners by machine sewn white thread, with a criss-cross shape enclosed in a square; stitching is visible on front of apron. Apron has a white fabric tie on each side, attached in similar fashion to neck loop. Bib features red fabric red cross, stitched onto bib using zig zag stitch in red thread, edges of cross are raw fabric. Both ties and neck loop are hemmed with straight stitch and overlocked in white thread. military, war, apron, uniform, medical, hospital, women, female, outfit, nurse, fashion, textiles

This knife and scabbard belongs to Lindsay Fankhouser, who wore it on his ankle when he served as an engineer/ crewman in the RAAF (Iroquois and Hercules) during the Vietnam war. He used this knife many times a day while he was serving. It is a brown leather knife sheath, with a decorative front and two canvas straps attached at the back. The shorter strap is located at the bottom of the sheath and the longer strap is located just below the belt loop. Both straps are fixed in place with stitching. The top strap has a square of stitching, while the bottom strap has two lines of stitching that follows the stitching of the sheath. The belt loop is at the top of sheath and is a fixed flap of leather that is folded across the top and also holds the handle of the knife in place using a circular hole that fits around the butt of the knife. The bottom canvas strap has three adjustable brass male press studs on the left side as well as the fixed female one on the right. The top canvas strap has four adjustable brass male press studs on the right side as well as as the fixed female one on the right. The sheath is held together by stitching and five iron rivets. There is one on the point of the sheath, two on either side of the top, and two more 51mm below the top two. 46mm above the sheath, there are another two iron rivets on either side. Above that on the holding flap, there are two iron rivets just above the circular hole on either side. On the flap, around the hole there are three brass flat-headed split pins, one on either side and one on the front. At the top of the sheath, above the decorative embossing, there is a dark brown jagged cut strip of fixed leather. All the leather on the object is a reddish-brown, while the canvas and stitching is light beige. The end stitching on the canvas straps is dark grey. The front of the sheath is polished leather, while the back is rough.On back of belt loop flap, there is an embossd manufactuing patent number; PATENT Nr152.463 On face of the sheaf there embossed decoration. It depicts a lion with stylised decorative foliage and above the lion there is a fleur de lise. Above that it reads Soallingen Norge.norway, norge, soallingen, knife, small knife, hunting, scabbard, sheath, vietnam, lindsay fankhouser, raaf

This medal was awarded, posthumously to Pte. Dash. He was born in Burwood(a small town near Sydney). He joined the Army 12/6/1915. Strangely, he did his medical inspection in May. He is listed as being in 1st Battalion from 18 May until 5 August. 6th August he arrived at the Battalion (on the Gallipoli Peninsular). He was wounded 7 August, whilst delivering ammunition, by machine gun with wounds to the neck and shoulder. From there, there was no record of him and was catergorised as Missing in Action". His father received notification with scroll 21/12/21. He received his Victory Medal Jan 18 1923. Pte Dash is interred in the Lone Pine cemetery, in Turkey. He was originally interred in Brown's Dip cemetery, but this site was deemed unsuitable for cemetery due to the changing landscape due to flood waters. Pte Dash was discovered in Lemnos, convalesencing after being hospitalised, 1st October 1915. However the board of inquiry made no mention of his sighting in Lemnos. He was interred in Gallipoli, so the sighting in Lemnos appears to be a mistake.British World War 1 Medal issued to Australians Round 36 mm Ribbon Royal Blue/Black/White/16 mm orange/White/Black/Royal Blue The Observse side is a bust of the King (George V). The reverse is a horseman astride his steed.2220 PTE F N DASH 1 BN AIF

Cap was donated by the Captain and Crew of USS CARL VINSON.A blue baseball cap - USS Carl VinsonGold coloured cotton thread - “USS Carl Vinson” and “CVN-70” on crown of the cap Embroidered bald eagle in white, gold and brown thread on crown of the cap between USS Carl Vinson and CVN-70 Embroidered acorns and oak leaves in gold thread on peak of cap. Label of maker inside cap.uss, carl vinson, cap, cvn-70, made in u.s.a, the corps

Shell dressings are a type of bandage with a gauze pad and a safety pin for fastening around the site of the injury. This item was made by Johnson & Johnson Pty. Ltd., Sydney, in or before January, 1942. Shell dressings were carried by individual soldiers and medics intended to be used as a first dressing in event of wounding or injury. The Australian-made shell dressing is opened by breaking the stitches at the top rather than pulling tapes apart as per the British design.Rectangular, light brown fabric pouch. The front is printed with black text in a rectangle explaining the instructions for opening the pouch and directions for use of bandage. The maker's name and date of manufacture are printed under the directions. Sewn together in two locations on the top. Irregular shaped medium brown stain on back.world war two, shell dressing, medical supplies, medical, wound dressing, johnson & johnson

This item has significance as an example of headwear produced for Australian military use. White, triangular shaped piece of fabric with folded over edge towards front forming headband. Fabric has overlocked edges with top stictched front band at fabric edge. Band features red fabric cross, overlocked in red thread (top) and white thread (bottom). Top of triangle is folded under and stitched down.nurse, military, war, women, female, hospital, fashion, textiles, medical, red cross

This knife and scabbard belongs to Lindsay Fankhouser, who wore it on his ankle when he served as an engineer/ crewman in the RAAF (Iroquois and Hercules) during the Vietnam war. He used this knife many times a day while he was serving. The handle of the knife has an aluminium butt that is 18mm long and a bolster that is 19mm long. Between these there are stacked wooden washers. The pattern of the washers is three reddish brown, one white, one black, one white, eleven reddish brown, one white, one black, one white, three reddish brown. The butt has a flat end and a gentle curve downwards (towards sharp side). The handle has a context shape. The bolster has a concave shape. The blade is sharped from 3mm past the bolster. The blunt edge of the knife has a gentle curve inwards from about 55mm along the blade until the sharp point of the blade. There is a maker’s mark on the blunt edge of the knife near the point. It has been worn down and is now illegible.norway, norge, soallingen, knife, small knife, hunting, scabbard, sheath, vietnam, lindsay fankhouser, raaf

A blue baseball cap - USS ARKANSASGold coloured cotton thread - “USS Arkansas” and “CGN-41”on crown of the cap Embroidered hog in white and red thread on crown of the cap between USS Arkansas and CGN-41 Embroidered acorns and oak leaves in gold thread on peak of cap. Label of maker inside cap. uss, carl vinson, cap, cvn-70, the corps, made in u.s.a

Presumably World War II based on comparison with silimar items. Initials inside cap may be associated with item to jacket, initialled with Lt. H. Dixon, VI. 7290.This item has historical signifigance as a an example of Australian military uniform dating presemably to World War II. Military peak cap, dark green. Brown leather chinstrap, attached by buttons on either side of visor with lettering 'AUSTRALIAN MILITARY FORCES' and Australian army insignia. Top of cap has double row of top stitching in dark yellow thread. Metal rimmed air holes (two) on each side under top of cap. Inner band made of brown leather embossed or printed with maker inscription. Rear of inner band has a row of rectangles punched through leather .50 mm in length, 22 in total, threaded through with gold coloured ribbon, tied together at centre back. Inner cap lining made of pale gold fabric, with diamond shaped liner/swear shield attached and topstitched in gold thread. Bronze coloured badge above visor with lettering Australian Commonwealth Military Forces.'THE MYER STORE FOR MEN MILITARY TAILORS MELBOURNE & ADELAIDE' on inner band in gold. Hand written initials H, and what appears to be D N (area has tears and insect damage) visible on lining behind visor. Initials in black marker. military, war, fashion, uniform, head, style, fabric, textile, cap, hat, visor, peak, outfit, myer, tailor, australian, forces, headwear, commonwealth.

This coat would have been part of a St Johns Brigade ambulance uniform. The buttons were made by A J Parkes, who manufactured buttons for the Australian Defence force. A J Parkes began manufacturing plastic injection moulded buttons from the early 1980's which suggests that the coat would have been made and worn during the late 20th century.This item is representative of a particular piece of uniform that would have been worn by a member of the St Johns Ambulance Brigade. It has historic significance as an item dating to the late 20th century which may have been used in the service of wounded military personnel. It also has some areas of staining which could have been coused by contact with blood. This could potentially be useful for scientific research purposes.Off white knee length coat with long sleeves. There is an epoulette on each shoulder and pointed collars. There is a deep waist pocket on either side of the coat. There is one silver plastic button at the top of each pocket. These have the St John Ambulance symbol on the front, which consists of an eight pointed cross, with two very small lions and two very small unicorns nestled in the corners of the cross. These motifs are surrounded by the words "THE ST JOHN AMBULANCE BRIGADE". The epoulettes are fastened with one identical button each. Underneath each epoulette there is also a clear plastic button attached the shoulder seam. Each sleeve has a 36mm long cuff which is fastened with one St John Ambulance Brigade button each. There are 10 clear plastic buttons that fasten the entire front of the coat. The back has two pleats commencing near the nape of the neck. The back of the collar on the interior seam has a label which has been cut and shows only a small amount of detail. Printed in faded blue on the label is: "E.R. TIMMINS".military, coat, st johns brigade, uniform, ambulance, st johns brigade ambulance, st johns

Standard West German uniform item for the periodOlive drab woollen forage or side cap with cotton liner. Olive diamond-shaped backing with yellow,red,black embroidered rosette cap badge. Manufacturer’s off-white label sewn to lining.Label inside cap - BAMBERGER MUTZEN-INDUSTRIE (red lettering). US12d/01/07897/001/3 VII/63 _15.12.63 55 8405-12-137-6563forage, german, cap, bamberger mutzen industrie

Post Vietnam sample uniformJacket and trouser set, camouflage drill uniform, tan, brown and green in colouruniform, camouflage

It is a woolen khaki green great coat, with inter shoulder lining of khaki green canvas. There are back belt loop holes in the interior, lined by the same canvas. The pockets are made of the same canvas and are not sew to the interior of the coat at the bottom. The insides of the sleeves are lined with a more beige khaki green material. There is a split flap that is 500mm long in the middle at the bottom of the coat, which is fixed shut with two brown plastic buttons and a metal hook and eye at the bottom. The construction of the jacket is four panels and has been taken in at the waist for form above both pockets. The jacket has a back pleat from below the triangle stitching below the nape of the neck. The back belt has three metal insignia buttons, and the backside is lined with canvas. On both shoulders, there are epaulettes which have one metal insignia button each. On the front, there are three metal buttons on each on flap, and when the jacket is done up, the left flap goes on top. It has three button holes on the left flap and one button hole on the right flap for a large brown button on the inside of the left flap. There are two outer pockets on either side of the jacket. Beneath the jacket lapels, on either side there are metal buttons, and there are button holes for them in the middle of the bottom lapel. Where the upper and lower lapels are split, there is a hook and eye. There is a brown plastic button on the underside of both the upper lapels, which is where the extra flap of fabric on the inside of the left jacket flap, can be fixed as a face protector. The tag on the inside reads; DAVID KLEIN PTY. LTD. Victoria 1967 An arrow (Department of defence symbol) SIZE 6 CLASS 8405 66.012.0494 REGIMENTAL NO................... NAME......................... The regimantal number section had a number filled in but then scribbled out and another number written above, which is 359282. The name section was filled in with B.R.MIER. The name and regimental numbers were done in black marker pen. All the metal buttons are decorated with the medical corps symbol, which is a serpent-entwined rod (Rod of Asclepius) surrounded by a laurel wreath and above the rod is a crown (St Edward’s Crown). On the outside of the upper sleeves, just below the shoulder, there is two patches that signifies the rank of Staff Sergeant. The top patch is an embroided St Edward’s Crown and represents the staff rank. It is 47mm wide and 45mm. Below this there is a patch depicting the three stripes/ chevorns of the sergeant rank. The chevorn’s points face down, and the sides measure 66mm, while the depth down to the point is 86mm. The bottom lengths is 100mm on both sides and the top lengths are 9mm. coat, trench coat, great coat, medical corps, staff sergeant, b.p. mier, 359282, david klein pty. ltd., 1967

Post Vietnam sample uniformJacket, camouflage drill uniform, tan, brown and green in colouruniform, camouflage

Trousers, camouflage drill uniform, tan, brown and green in colouruniform, camouflage

Associated with the service of Lieutenant H. Dixon, circa 1943. Worn by people who served on the Home Front in this Corps during the Second World War.This item is significant because Australian Army khaki woollen service dress jacket with red embroidered circular Unit Colour Patch on the top of each sleeves consistent with markings of Australia's home guard – the Volunteer Defence Corps (VDC). Four button down closure. The jacket is fully lined with a lightweight fabric, either natural or synthetic. A self fabric belt passes around the waist and fastens with a buckle at the front. Button down epaulettes with two pips denoting lieutenant ranking. 'Rising Sun' collar badges on each lapel. Pleated breast pockets with triple pointed flaps with exposed buttons. A pair of pockets over each hip with straight flaps each fastened with one visiable button. Pockets over hips have one Four front pockets are fastened with one visible buttton. These 8 buttons are domed metal showing a raised emblem of Australia surmounted by the King's Crown: also see Tudor Crown or Imperial Crown. The back of these buttons have a loop shank, secured with cotton. Surrounding is a stamp K. C. LUKE PTY LTD. MELB. There is a small pocket on the inside of the jacket corresponding to the right breast pocket.Small, white, rectangular manufactures tag stiched with khaki coloured cotton within the small pocket on the inside of the jacket corresponding to the right breast pocket. Approximately H 24mm x W 44m The MYER STORE for MEN MELBOURNE & ADELAIDE Typed in red ink on the bottom section of the manufacturers tag. Lt. H. Dixon W. 7290. 10/12/43.heraldry, uniform, volunteer defence corps

This battle dress jacket is dated 1969 (manufacturing date). It was issued to the “Prince of Wales’s Light Horse’ Regiment however the date of issue is unknown. A Prince of Wales Light Horse unit was based in Kyneton, a neighboring town to Woodend. This jacket likely originated from the Kyneton area. The jacket type was still in use during the Vietnam war in which the Regiment participated. Considering the condition of the item, it is highly likely the jacket has not seen active serviceThis battle dress jacket is represenative of a stamdard issue Army uniform. it is also in very good condition.Khaki, wool jacket. Prince of Wale's light horse embroidered on a yellow flash, stitched on both shoulders. Cropped style with two pockets on front, four khaki buttons and waist belt. Two epaulets and a manufacturer's label on inside left hand side. battle dress, jacket, trouser, neck tie, lanyard, khaki, wool, fabric, uniform

These braces date to the latter half of the 20th century. They were issued to the “Prince of Wales’s Light Horse’ Regiment, however the date of issue is unknown. A Prince of Wales Light Horse unit was based in Kyneton, a neighboring town to Woodend. This jacket likely originated from the Kyneton area. The uniform type was still in use during the Vietnam war in which the Regiment participated. Considering the condition of the item, it is highly likely that it has not seen active serviceThese braces are representative of a piece of standard issue Army uniform. They are also in very good condition.Dark green leather and elastic braces. The section that fastens to the back has two leather attachments with holes and slits for fastening to trousers. This section extends upwards and divides into two elastic straps to afix over shoulders. There is one metallic clip that holds that elastic in place near the front of the brace, where it is folded over and can be adjusted. The two strips then end with two leather attachments each, with holes and slits for fastening to the front of a pair of trousers. The leather components are textured on the exterior and smoother on the interior. The interior sections of the leather pieces are also cream coloured. battle dress, braces, uniform, armoured, cavalry, prince of wales light horse

This lanyard dates to the latter half of the 20th Century. The colour yellow relates to the armoured forces. The lanyard was issued to the “Prince of Wales’s Light Horse’ Regiment, however the date of issue is unknown. A Prince of Wales Light Horse unit was based in Kyneton, a neighboring town to Woodend. This lanyard likely originated from the Kyneton area. It is possible that the lanyard was used during the Vietnam war in which the Regiment participated. However considering the condition of the item, it is highly likely that the lanyard has not seen active serviceThis item is represenative of a standard armoured military lanyard. It is also in very good condition.Long strip of cylindrical yellow knotted fabric. There is one large loop, knotted two thirds along the length of the fabric for attachment to the shoulders. There is another small loop at the very end for insertion into a pocket.battle dress, lanyard, prince of wales light horse, uniform, army, cavalry, armoured

Military cap dating from 1966, possibly worn by military personnel in West Germany.This cap is significant as an example of military headwear dating to 1960’s West Germany. Olive drab coloured forage or side cap lined with matching colored fabric. Cap has a flap on each side which may be unfolded. Side flaps are joined by by strip of fabric (all one piece), across the front of the cap which when extended, may form a covering for the mouth area. Flap may be secured with a silver stud button attached to each side of cap. Front of cap displays West German roundel in black, red, and yellow set in olive coloured diamond shaped piece of fabric. Off-white manufacturer’s label on inside, sewn to lining with white thread. Cap is size 54. On inside of hat: (in red) BAMBERGER MUTZEN INDUSTRIE (in black) US12d/22/15565/0028 IX/1966 /5 54 8405-12-138-8897

This Army Driving Licence was issued to Ernest James Richard McDonough. He served with Detachment A Squadron 3 Cavalry Regiment and 1/15 Royal New South Wales Lancers. Born 1925 and Died 31 November 2001. He served with 3 Calvary Regiment in Vietnam.A follow up Army Driving Licence held by 36970 Ernest James Richard McDonough who served with 3 Calvary Regiment during he Vietnam War.A white sheet of paper mounted on a dark tan cardboard and cloth cover. Australian Military Forces Army Driving Licence No. 56115. Issued to 36970 WO2 Ernest James Richard McDonough. The previous ranks of Sergeant and Staff Sargeant have been crossed out.Transcribed from AAF G11 No 42700. Details of vehicles qualified to drive, date, testing officer, Unit and Signature of Issuing Officer. mcdonough, 36970, aafg11