Showing 5747 items
matching operations
-
Otway Districts Historical Society
Photograph, Ray Jude, Colac: G42 about to depart with the last train, 30 June 1962
The last train to Beech Forest ran on 30 June, 1962. The train had a particularly motley look to it; 180 passengers were loaded into NU goods vans which had been hastily fitted out with temporary seats and tarpaulin roofing. The train was hauled by the dilapidated G42 locomotive, kept alive through patch-up repairs and cannibalised G41 parts, which intending travellers looked at with some trepidation. The train made it without mishap. When it returned to Colac on that cold, gloomy June day it signalled the end of narrow gauge operations in the Otway Ranges.B/W. Locomotive G42 with the sign " Australian Railway, Last Train to Beech Forest, 30-6-62, Historical Society" is departing Colac. NC guard's van and NU louvred van are attached. A woman and man watching. .colac; beech forest; railways; -
Ballarat Tramway Museum
Photograph - Geelong tram No. 2 at T&G Corner Geelong, c1938
The photo shows Geelong No. 2 in Moorabool St at the intersection with Ryrie St. The tram has the destination of North. The tram is in its modified form that provides for one-man operation. In the photo are Edments, Savoia Cafe, Commercial Bank of Australia, and the T&G building. The photo has been dated between 1935 when the tram was converted and 1939 when the bar neon traffic lights were installed at the intersection. The photograph was taken from a Victorian Railways glass negative held at the State Library of Victoria. See item 8360 for a digital copy of the SLV scan - http://handle.slv.vic.gov.au/10381/97173Yields information about Geelong No.2 and the intersection of Ryrie and Moorabool Streets Geelong.Black and white photograph with a number of rear.In pencil "2171" on rear.tramways, trams, geelong, ryrie st, moorabool st, temperance & general, tram 2 -
Kew Historical Society Inc
Print, Kew Railway Station in the early 1900s, c.1900
Kew Railway Station (1887-1959). ‘Kew Railway Station’ in Denmark Street was the terminus of the Kew Line, which extended from Hawthorn Station to just south of Wellington Street. The Station opened on 19 December 1887 after a prolonged campaign for a railway by the people of Kew. Due to a decline in patronage, the passenger service ceased operations in August 1952. While a freight service continued for another five years, the line and station were officially closed on 13 May 1957. Subsequently demolished in 1959, the headquarters of VicRoads (formerly Country Roads Board) now stands on the former Station site.This work forms part of the collection assembled by the historian Dorothy Rogers, that was donated to the Kew Historical Society by her son John Rogers in 2015. The manuscripts, photographs, maps, and documents were sourced by her from both family and local collections or produced as references for her print publications. Many were directly used by Rogers in writing ‘Lovely Old Homes of Kew’ (1961) and 'A History of Kew' (1973), or the numerous articles on local history that she produced for suburban newspapers. Most of the photographs in the collection include detailed annotations in her hand. The Rogers Collection provides a comprehensive insight into the working habits of a historian in the 1960s and 1970s. Together it forms the largest privately-donated collection within the archives of the Kew Historical Society.A photographic copy of a book plate from 'Kew's Civic Century' (1960) by W.D. Vaughan. The book plate was itself a copy of an early 20th century postcard depicting the Kew Railway Station."Railway opened 1887 - Then as photo states"kew railway station, dorothy rogers, country roads board, vicroads -
Clunes Museum
FIRE MARKS
Buildings had wooden or metal plaques in the form of an Insurance Brigades coat of arms or Firemark affixed to their exteriors denoting which insurance company had the building under its care. When the fire alarm was given many companies would rush to the scene, the mark would be inspected, and only the Brigade that owned the mark would fight the fire while the other companies would do their best to hinder the operation. Source: "Life Under The Bells" by Sally Wilde (ISBN 0 582 87023 2) published by Longman Cheshire in 1991 on the occasion of the centennial of the Board, (MFB).1 Gold lettering and shield border .2 Raised image of fireman with hose and building .3 Supplementary information about fire marks by the donor .4 SQUARE PLAQUE WITHRAISED BLUE BACKGROUND, THREE GOLD TIGER HEADS, 5. LARGE SQUAERE WITH CIRCLE RAISED, PICTURE WITH FIREMAN IN FROM OF CART, HOLDING AXE..1 Colonial .2 Protector .3 Nil 4. SALOP 5. BIRMIN GHAMfiremark, insurance, colonial, protector -
Wodonga & District Historical Society Inc
Functional object - Sanyo VHF Colour Television 1980
The Sanyo VHF colour television is thought to have been assembled in Wodonga, as Sanyo was one of the international companies that set up business in Wodonga in the 1970s as part of the de-centralisation of industry and continued operation into the 1980s. The Sanyo Australia Pty. Ltd. factory in Wodonga opened in 1974 with 35 staff and production peaked in 1976-1977 when it employed 360 people. In the first ten years 350,000 televisions were assembled from Japanese parts, however by 1984 the number of staff had reduced to 112 and the factory closed in 1987. All Sanyo televisions were then imported from Japan. The Sanyo VHF colour television has local, state and national significance as it is thought to have been assembled in Sanyo Australia's factory in Wodonga. Sanyo was one of the international companies that set up business in Wodonga as part of the decentralisation of industry in Australia in the 1970s-1980s.Cream and black plastic Sanyo VHF colour televison, with the Sanyo logo and one large circular VHF control knob for the different channels on the proper left black plastic panel, and one small off-on volume knob at the bottom of the black plastic panel. The diagonal screen measurement is 30 cm or 11 inches."VHF" / SANYO / Telecolor / AFT / OFF-ON/ VOLUME" on the proper left black plastic panel on the front of the television. "75Ω- 300Ω" on the black part of the cable attached to the two antennas. "FOR YOUR SAFETY / Install any external / aerial to AS1417.1" on the back of the television. "SERIAL NO / 30207332" on the back of the television. "SANYO / MODEL CTP 2600 / CHASSIS NO. 79P-B5ZH 01 / AC 240V~, 50Hz, 85 WATTS / SANYO ELECTRIC CO., LTD. MADE IN JAPAN / WARNING / DANGEROUS VOLTAGE INSIDE / CHASSIS LIVE / CONTACT IS DANGEROUS / 3401901 B5ZH-B" on the back of the television. "SBS TELEVISION" stickers on both sides of the television. "WODONGA ASSEMBLED TELEVISION. (underlined) / This SANYO VHF COLOUR TELEVISION / Serial number AS1417.A (AS = Australia) / Model CTP 2600 was assembled / at the Sanyo Drive, Wodonga, factory Circa 1980, from Japanese parts." printed on a paper label attached to the upper back part of the television. sanyo, sanyo colour televisions, sanyo t.v.s, vhf t.v.s, sbs, wodonga, sanyo australia pty. ltd. -
Melbourne Tram Museum
Document - Reports, The Met et al, Royal Exhibition Building and Vintage Tram Route, 1986
Set of three documents that were prepared to explore the concept of reusing the Royal Exhibition buildings and providing a Vintage tram route between them and the City. The first, an extensive report by The Met is an Addendum to the Fitzroy Feasibility Study of August 1986. The second is a document titled "1888 Street: A proposal for a Museum of Victorian Home and Street Life by Charles Sowerwine, University of Melbourne, and a handwritten note about the possible tram service and its operation written by Doug Prosser commenting on the proposal. The proposal included the reuse of the cable tram winding house on the corner of Gertrude and Nicholson St. Fitzroy.Demonstrates a report on a proposal for a Fitzroy Vintage Tram service.Set of three documents related to the provision of a Royal Exhibition Building and Vintage Tram Route: 1 - Approx 150A4 pages, black comb bound with The Met covers 2 - 66 page, photocopied - stapled in top left hand corner 3 - four page hand written on MTA memo ruled paper.tramways, the met, vintage trams, royal exhibition buildings, proposals, fitzroy, winding house -
Melbourne Tram Museum
Document - Historical notes - Box Hill Tramway and other Victorian Tramways
.1 - typed notes with the heading "a tablet beside the Box Hill Post Office today marks the terminus" Provides notes on the Box Hill - Doncaster electric tramway of 1888, some historical notes about its operation and closure. Includes notes on Bendigo's battery trams, steam trams, SA's Goolwa to Port Elliot tramway, Fairfield horse tramways and other horse trams. No information as to who prepared the original document - possibly Bob Prentice. .2 - an extract from a publication showing the commemorative cairn at the Box Hill terminus and providing some notes on the tramway.Yields information about the first Australian electric tramway and other tramways in Victoria..1 - Foolscap sheet - blue paper, typed notes on the Box Hill - Doncaster Tramway and other Victorian Tramways. .2 - digital scan of a publication showing the commemorative cairn at Box Hilltramways, trams, box hill, electric trams, victorian tramways, commemorative, monuments, steam trams, bendigo, doncaster -
Melbourne Tram Museum
Book, Melbourne & Metropolitan Tramways Board (MMTB), "Rules and Regulations", 1974
Provides rules for both tramway and motor bus operations, has index pages 3 to 28, rules for both systems and specific type of vehicle, ticket machines and ticket issuing. At rear is MMTB By-Law 11 and By-Law, the latter dated 1956. Issued to F Reale-Key who worked for the Civil Engineering at South Melbourne Depot. Section of the MMTB or The Met and was authorised to drive trams. Dated Nov. 1974. For a photo of Frank standing in front of tram 8, see "MetLines - Vol 1, No. 9 December 1985". See Item 82 for a full scan of the document.Demonstrates the Rules and Regulations issued to drivers and to those authorised to drive trams or buses.Book - green Rexine covers, 106 pages with title - "Melbourne and Metropolitan Tramways Board - Rules and Regulations". Six sections, sewn into covers, dated Nov. 1974. See image i2 for details.tramways, trams, mmtb, the met, drivers, training, south melbourne depot, civil engineering department, instructions, rules, regulations -
Melbourne Tram Museum
Audio - AV Presentation, Robert Green, "The Melbourne cable tramways - 1885 - 1940", 5/2008
Presentation by Robert Green to the Engineering Heritage Victoria, 22 May 2008 comprising a Powerpoint slides with the actual audio of the presentation. Gives the background to the establishment of the Melbourne cable tram system, its construction, operation, power or engine houses, and its replacement by electric trams or buses. Includes images of remnants of the former system in Abbotsford St North Melbourne, horse omnibuses, other cable tram systems, the grip, George Duncan, F B Clapp, the tramcars, cables or the rope, engine houses, St Kilda and passengers changing at Victoria St from electric to cable tram Demonstrates the work of Robert Green's research work into cable tram history and research and yields information about the history and development of Melbourne's cable tram network, the largest single operator network in the world.Digital Audio Visual Presentation of a lecture by Robert Green 2008 cable trams, melbourne, mtoco, trackwork, engine houses, tramcars, george duncan, f b clapp, horse buses, abbotsford st -
The Beechworth Burke Museum
Photograph, Unknown
The A1 Gold Mine is located north of Woods Point, near Jamieson, in the Upper Goulburn region of Victoria. Gold was discovered at the A1 site in 1861 and mining operations began in 1864. The A1 Mine Settlement refers to a small township known variously as Castle Reef, Castle Point, and Raspberry Creek, which developed in the 1860s around mining industry centred on a crushing machine that worked the three gold reefs in the area. Historically, the name "A1"referred to the high quality of gold found in the quartz reefs at depths of at least two thousand feet. Along with the Morning Star mine at Woods Point, the A1 gold mine produced almost sixty percent of Victoria's gold output in the 1950s to 1970s and continued operating until 1992 when it went into administration. Operations at the site were revived in 2016 and the A1 Mine is now considered one of Victoria's premier gold mines. The A1 mine is part of the extensive and prospective Lachlan Fold Belt, a north-west trending belt of tightly folded Early Devonian sedimentary rocks extending from New South Wales to Victoria. Mineralisation is hosted within or immediately adjacent to diorite dykes. Contemporary development of the 'Queens Lode' at the A1 mine signals a move from high-grade, narrow vein airleg mining into larger scale, mechanical mining designed to increase ore production volume. This original, undated photograph of the A1 Mine appears to depict an area or phase of disuse or abandonment. The aged and humble appearance of the cottage suggests association with the historical A1 Mine Settlement, therefore the image may have been taken prior to the 1950s-1970s revival period in which the A1 mine is known to have produced high gold yields. The photograph contributes to our understanding of the A1 Gold Mine's impact on the landscape and the social, environmental impacts of mining on communities and may be compared with others in the Burke Museum's extensive collection of mining photographs to deepen our understanding of mining in the Jamieson area.Black and white rectangular photograph printed on photographic paperReverse: 5577 / A1 Mine / Near Jamieson / Vic. /burke museum, beechworth museum, beechworth, gold fields, gold rush, victorian gold rush, mining tunnels, gold ming history, colonial australia, australian gold rushes, mining technology, beechworth historic district, indigo gold trail, indigo shire, upper goulburn shire, jamieson, woods point-walhalla goldfield, a1 gold mine, victorian high country, modern mining methods, orogenic gold province, gold mineralisation, devonian, dykes -
Flagstaff Hill Maritime Museum and Village
Leg Vice, c. early 1900s
This leg (post) vice once belonged to Goodall and Sons, who were blacksmiths in Terang. The leg vice is a common tool of the ‘smithies’ (blacksmiths). It is also an engineer's tool but in the early 1900s the smith was often the nearest approach to an engineer’s services for many miles around. The smith was called upon to do a variety of work. The leg vice is used to hold hot iron while the metal is pounded, heated and beaten again and again until it is the required shape. Henry Goodall (1870-1936) Henry Goodall was the proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The leg vice is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the early to mid-1900s.Leg vice, also called a post vice. The large iron vice stands on a post on the floor and post brackets attach it firmly to a solid object such as a workbench. The sliding metal handle winds the screw spindle in and out to change the grip of the jaws that hold the workpiece. This leg vice once belonged to Harry Goodall & Sons, blacksmiths of Terang.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall, trade tools, blacksmith tools, leg vice, leg vise, pose vice, post vise, terang 1900s, warrnambool district 1900s -
Flagstaff Hill Maritime Museum and Village
Anvil, early to mid-1900s
This anvil once belonged to Goodall and Sons, who were blacksmiths in Terang. The smith was called upon to do a variety of work. In the early 1900s he was often the nearest person to be able to perform an engineer’s services for many miles around. An anvil is used by blacksmiths to forge and shape his work pieces. The conical horn is used for hammering curved work pieces. The anvil is a common tool of the blacksmiths (‘smithies’) and other metalworkers. There has been very little change in the basic design of the anvil since Greek and Roman times. Henry Goodall (1870-1936) Henry Goodall was proprietor of garages as H. Goodall & Sons Pty. Ltd., at both Terang (McKinnon and High Streets) and Mortlake (Dunlop Street). His business was in operation in at least in 1916 and perhaps well before, considering the date of the tyre bender and its use for wagons with wooden wheels. It was still in operation in 1953, chasing up debtors in Mount Gambier Court. Amongst the employees of H. Goodall & Sons Pty. Ltd. was Ernie Entwistle, a blacksmith (a soldier who died in 1916 ) and Alfred Hodgetts, radio expert (killed in a fatal accident in 1943, when he was in his early 30s ). Henry Goodall was involved in the community as a Justice of Peace, a deputy coroner, President of the Mortlake Hospital, trustee of the Soldiers’ Memorial Hall, and as a prominent Freemason. He and his wife had two sons (Charles and John) and one daughter (Mrs. Chas. Newton, of Skipton). The anvil is locally significant as it was used by a local company in Terang and Mortlake in their blacksmith, wheelwright and garage business. It is an example of the tools of the blacksmiths’ trade in Victoria in the early to mid-1900s. Anvil, single horn, used as a tool by blacksmiths and metalworkers. Large block of metal with a flat top face, a conical horn on one side and a ‘v’ shape on the other. The anvil’s base has a squat stand and sides that are a variety of shapes. This anvil once belonged to Harry Goodall & Sons, blacksmiths of Terang. C. early to mid-1900s.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, h. goodall & sons of terang, terang blacksmith, h. goodall & sons pty ltd, mortlake, ernie entwistle blacksmith, alfred hodgetts radio expert, charles goodall, john goodall, mrs. chas. newton nee goodall, trade tools, blacksmith tools, metalworking tool, forging tool, terang 1900s, warrnambool district 1900s, anvil, blacksmith’s anvil, single horn anvil -
Melbourne Legacy
Document, Branch Chairman's Guide 1991, 1991
A guide for Chairmen of Melbourne Legacy. This copy was owned by Graham Riches. The guide contains: Section A Operations Council and Branches : The Relationship Operations Council Section B Group, Liaison Committee and Groups : The Relationship Group Liaison Committee Section C Internal Changes of Communication and Sources of Information for the Legatee Section D An outline of responsibilities and procedural guidelines for branch chairmen Section E Financial Authority of Branches Section F Guidelines for the Format and Content of Branch Minutes Section G Selection and Appointment of Branch Chairmen Section H Enrolment, Contact and Reporting Procedures Section I Procedure and Notes for Proposers of Prospective Members Section J Duty Legatee Scheme Section K Education (including Sir John Gellibrand Memorial Scholarship and the Macrae Trust) Section L Section M Welfare Section N Pensions, Benefits and Allowances Section O Widows' Committee and Widows' Clubs Section P Widows' Clubs Rules Section Q Current Rates of Social Security and Repatriation Pensions Section R Recommended List of Contractors Available for Home Maintenance (including a list of contractors that can provide services to Widows, such as plumbers, bricklayers, electricians and blind supplies and repairs) 31 yellow pages - not scanned due to it being names and addresses and phone numbers. Section S Administration Instructions An Organisation Chart of Legacy and A Table of Organisation of StaffA living document that was regularly updated for the Chairman of Melbourne Legacy to use in his duties.A4 pages x 64 bound together with split pins.L/GPA Riches in pencil on top edge.regulations, rules, objectives -
Wodonga & District Historical Society Inc
Tool - Sieba Gordon Gas Mask - North East Water Authority, Siebe Gorman & Co. Ltd, c1960
This mask set is part of the North East Region Water Authority collection in the Wodonga Historical Society. Wodonga's drinking water and wastewater operations were originally managed by the Wodonga Waterworks Trust, which was established in 1897, after Wodonga became a separate shire in 1876. In 1923 a Wodonga Waterworks Trust referendum to provide funding for new infrastructure to supply more water of better quality to Wodonga was passed. This included building the Wodonga Water Tower and it was completed in 1924. It supplied water to Wodonga until 1959, when it was drained and decommissioned after the No 1 Basin on Huon Hill was completed in 1958. In 1983 the Wodonga Waterworks Trust and the Wodonga Sewerage Authority became part of the Wodonga Council. And by 1989 a filtration plant at Huon Hill was completed, which provided filtered water of improved quality to Wodonga, in accordance with the World Health Organisation’s guidelines. In 1994 the Kiewa Murray Region Water Authority took over the Wodonga Council’s water and wastewater operations, and then in 1999 the Kiewa Murray Region Water Authority combined with the Ovens Region Water Authority and became the North East Region Water Authority or NERWA. NERWA then became known as North East Water. Siebe Gorman was a British manufacturer of industrial respirators that served the mining industry, the chemical industry, and the agricultural industry from 1938 until the 1980s. The "Puretha" line refers to the canister included, which was designed to tackle industrial hazards.Siebe Gorman "Puretha" Type C Kit with Vista Vision Facepiece. The facepiece consists of a formed plastic lens held on by a white retaining ring that stretches around the rubber facepiece and is connected by two thumbscrew lugs. The exhale assembly is covered by a steel mesh.The hose is a standard industrial hose. The canister is attached by a khaki webbing material. An instruction sheet is included. The kit is a small leather case with two front latches. Safety instructions and chemical information on canister label. On label: EVERYTHING FOR SAFETY EVERYWHERE Date filled 28 DEC 1961 NO. 675 north east region water authority, gas mask, respirator, sieba gordon -
Wodonga & District Historical Society Inc
Functional object - Matchbook collection
This item is from a collection donated by Les Cole of Wodonga, who among several occupations in his life time, drove buses around the Wodonga and district for the Mylon bus company. In March 1952, Transport Parks Pty Ltd. purchased 20 acres of land from the Kelly Estate on the outskirts of Wodonga. The land sold at the record urban price for Wodonga of £300 an acre. They had plans to establish a transport park advertised as the first of its kind in Australia at a cost of £50,000. The park was to have accommodation for up to 1000 transports, caravans and cars, as well as all amenities ranging from showers to a cafeteria. It was to be known as "Twenty Acre Service Station” When the park first came into operation it was to have accommodation for up to 200 transports. Wodonga had been chosen for the site of the company's first park because it was a ''half-way house" between Sydney and Melbourne, and because transports had to stop there to obtain permits to proceed on crossing the border. The service station section of the Transport Park began operation in June 1954, with other facilities following. The business operated profitably until at least 1971 as the Transport Park, but perhaps never reached its aims of providing for 1,000 transports at any given time. The Vacuum Oil Company was the first oil company established in Australia. In 1916, Vacuum introduced its "Plume" brand to the Australian market. Vacuum replaced the famous Plume brand name with Mobilgas in 1954.A collection of 3 different match books representing a variety of businesses.match book collection, matches -
Orbost & District Historical Society
black and white photographs, Snowy River Mail, 1990
Wendy Blackburn was in charge of T.A..F.E. Orbost and the photographs were taken in her office. Also in the photographs are Tracey Barnett, Peter Cook and Dan Osborne. The Orbost Education Centre is a community based not-for-profit local organisation. It has been in operation since 1976. The programs respond to the needs of the community and short courses are delivered throughout the year for people of all ages and backgrounds. The basis is promoting learning, connectedness and belonging. It is supported by funding from the community, state government and non-government organisations. TAFE offered adult education to those new out of school and mothers coming out of motherhood as well as others. These photographs are pictorial records associated with adult education in Orbost.Five black / white photographs related to adult learning in Orbost. education-adult-orbost t.a.f.e.-orbost -
Lara RSL Sub Branch
Framed Photo of H.M.A.S. VENDETTA Daring Class Destroyer
HMAS Vendetta was one of three Daring-class destroyers built for and operated by the Royal Australian Navy. The destroyer was built by Williamstown Naval Dockyard and entered service in 1958. During her early career, Vendetta was deployed to the Far East Strategic Reserve on multiple occasions. In 1965 and 1966, the destroyer undertook deterrence patrols during the Indonesia-Malaysia Confrontation. Along with several runs escorting the troop transport HMAS Sydney to South Vietnam, from late 1969 to early 1970 Vendetta was assigned to combat operations and became the only Australian-built warship to serve in a shore bombardment role during the Vietnam War. he ship underwent a two-year modernisation from 1971 to 1973, and in December 1974 was one of thirteen RAN warships involved in Operation Navy Help Darwin after Cyclone Tracy devastated Darwin. Several more deployments were made to the Far East, up until 1978. In October 1979, the destroyer was decommissioned, and served as a parts hulk for sister ship HMAS Vampire. Vendetta was sold for ship breaking in January 1987. 1002 Rectangular Shaped Glass Covered Photo Frame, 1002.1 H.M.A.S, VENDETTA FIRST COMMISSION MAP. H.M.A.S. VENDETTA Daring Class Destroyer. -
Flagstaff Hill Maritime Museum and Village
Domestic object - Plate, W. H. GRINDLEY & Co. Ltd, 1914-1925
The Maker’s Mark stamped on the back of this plate, a green laurel wreath with “W. H. Gringley & Co. Ltd, England” below, was used by the company between 1914-1925, according to Kroker and Goundry, authors of a paper “ARCHAEOLOGICAL MONITORING AND MITIGATION OF THE ASSINIBOINE RIVERFRONT QUAY”. The company used different Marks at other times during their operation. The design on this plate is transferware. The company used this more economical process of adding a transfer rather than employing artists to handprint them onto their dinnerware. William Henry Grindley and Alfred Meakin established the company at Tunstall, Stoke-on-Trent, in 1880. The company produced their wares for export to countries that included Australia.This ceramic plate is an example of dinnerware imported from England. The plate was made between 1914 and 1925 . The popular 'bird of paradise' design on the plate is an example of transferware, which made decorative dinnerware more affordable. China plate, earthenware, round, off-white colour with fine blue rim and three transfer decals spaced around the rim. Decals each have a bird of paradise on a flowering branch. The centre of the plate is plain. The maker’s stamp is an open green laurel wreath enclosing a decorative horizontal line, above the name. Made by W H Grindley & Co. Ltd of England.On underside; logo "[green wreath] above W. H. GRINDLEY & Co. Ltd. ENGLAND"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, plate, dinnerware, w. h. grindley, english, plateware, bird of paradise, transferware -
Federation University Historical Collection
Document - Invitation and ticket, X-Ray Demonstration Invitation, 1902
The xray demonstration was given after the opening of the Mining at Metallurgical Laboratory at the Ballarat School of Mines. "Arrangements for the conversazione in Connection with the opening of the new metallurgical and mining laboratory at the School of Mines are in a forward state, and the inaugural ceremony pro mises to be a most auspicious one. Mr William Fox, of Melbourne, has accepted an invitation to be present, and he will give an X Ray demonstration. Dr Fox's achievements in this direction are well known, and the apparatus he is possessed of is very complete. During the evening Mr W. C. Little and Mr Bishop will give selections on the Pianola, and besides this there will be a first-class graphophone in operation." (Ballarat Star, 22 May 1902)Blue card with black printing.x-ray, ballarat school of mines, metallurgical laboratory, william fox, xray demonstration -
Australian Commando Association - Victoria
Book, A.B.Feure, Australian Commando: Their Secret War against the Japanese in World War II
non-fictionww2, australian commandos, australian special operations, australian special forces, world war ii -
Wangaratta RSL Sub Branch
Framed photograph, N.E. Framing Studio, Aircrew Training
DH Tiger Moth Aircraft were used by the RAAF as elementary trainers in the empire air training scheme of 1940-44 during which time Australia trained 27,387 aircrew members. Although primarily employed as trainers, a few Tiger Moths were camouflaged and used operationally with army co-operation units in New Guinea. The Tiger Moth remained in RAAF service for almost 17 years, and several Tiger Moths were also transferred to the RAN after World War II. Eventually, on 9 January 1957, the last 10 RAAF Tiger Moths were flown from Point Cook to Tocumwal for disposal.The de Havilland Tiger Moth aircraft is a 1930's biplane which was a primary trainer aircraft used to train over 27,000 aircrew in Australia during the Second World War.Black frame with gold insert and cream mounting containing black and white photo of several planes in the background and numerous aircrew members in the foreground. Front: Aircrew Training. DH Tiger Moth Aircraft were used by the RAAF as elementary trainers in the empire air training scheme of 1940-44 during which time Australia trained 27,387 aircrew members. Royal Australian Air Force No.11 in a series of 25. raaf, aircrew, training, world war 2, tiger moth -
El Dorado Museum Association Inc.
Photograph - Digital Image - 2nd Corporal Frederick A. McLaughlin, c1914 - 1918
McLaughlin, Frederick Arthur Service number: 10307 Australian Imperial Force Ranks held: Sapper, 2nd Corporal Service: Australian Imperial Force Unit: 10th Field Company, Australian Engineers Recommended for Military Medal, 13 September 1918 'Distinguished himself by gallantry and devotion to duty in bringing up material for a bridge urgently required East of Vaux. Lance Corporal McLaughlin was in charge of the wagons conveying material for this purpose and led the way over a road under heavy shell-fire in full view of the enemy. The determination and judgement shown by this N.C.O. in this, as in earlier operations, have shown him to be an excellent soldier'. first world war, world war one, wwi, australian imperial force, aif, el dorado, eldorado, soldiers, men -
Wangaratta RSL Sub Branch
Framed Graphite Print, 13/05/2005
To commemorating 40 years since The Dawn Of a New Era for the Royal Australian Navy - 1965-2005 - A limited release of a graphite print of Guided Missile Destroyers HMA Ships PERTH (38), HOBART (39) and BRISBANE (41) served the Royal Australian Navy (RAN) from 1965 and 2001.These ships were the first for the RAN to have been designed for the 'Missile Era' and were also the first to be not of a British design instead they were purchased from the United States of America. All 3 served with distinction on the 'Gun Line' during the Vietnam War and the BRISBANE also saw operations of the First Gulf War.Framed print drawn in graphite depicting three Guided Missile Destroyers at sea RAN - Commemorating 40 years since The Dawn Of a New Era for the Royal Australian Navy - 1965-2005 Limited Edition 3/50ran, hmas perth, hobart and brisbane, guided missile destroyers -
Forests Commission Retired Personnel Association (FCRPA)
Radio set
After the 1939 bushfires, the Forests Commission invested heavily in a radically new communications network. After suffering some inevitable delays due to the War, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. The communication systems were regarded at the time to be more technically advanced than the police and the military. These pioneering efforts were directed by Geoff Weste, and later technical experts like Rex Philpot, John Whitehead, Charlie Reisinger and many others who designed, built and repaired most of the radio equipment. There was a dedicated radio laboratory at Surrey Hills in Melbourne.Radio setManufactured by McLeod Electric - Derrinallumradios -
Forests Commission Retired Personnel Association (FCRPA)
Radio set, STC Star Radio Telephone
After the 1939 bushfires, the Forests Commission invested heavily in a radically new communications network. After suffering some inevitable delays due to the War, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. The communication systems were regarded at the time to be more technically advanced than the police and the military. These pioneering efforts were directed by Geoff Weste, and later technical experts like Rex Philpot, John Whitehead, Charlie Reisinger and many others who designed, built and repaired most of the radio equipment. There was a dedicated radio laboratory at Surrey Hills in Melbourne.Radio setSTC Star Radio Telephone Type FR5.1.25-STradios -
National Wool Museum
Carpet Samples, Godfrey Hirst and CO. Pty Ltd, c.1990
Carpet samples created by Godfrey Hirst, a carpet mill whose history spans back to 1865 when the Victorian Woollen and Cloth Manufacturing Company began operations in Geelong and was purchased in the 1890s by the man Godfrey Hirst. Godfrey Hirst’s entrepreneurial skills and knowledge of the industry led to the great success which saw the company expand in multiple forms over the next century and a half. Today, thousands of metres of carpet are produced by Godfrey Hirst every day, and their flooring can be found in millions of homes. These 6 carpet samples date from the early 1990s and each have a unique colour pattern and design.Each carpet sample is made with a pile fibre that is 100% wool. The primary backing of the carpet is a woven polypropylene with a secondary backing a woven jute. Carpet 8102.1's colour name is Slate. It has a dark grey background with a red and blue diagonal stripe. The pattern repeats in a 10cm x 11.5cm block. Carpet 8102.2’s colour name is Terracotta. It is a mostly block pink colour with no repeating pattern. It has occasional flicks of grey. Carpet 8102.3’s colour name is Arctic Night. It has white, light blue and grey colours repeating one after another in a diagonal line. Carpet 8102.4’s colour name is Ivory. It has a brown background with a cream colour diamond. The pattern repeats in a 15cm x 15cm block. Carpet 8102.5’s colour name is Glenwood. It has a thin darker green and lighter green horizontal stripe spanning its entire width. These stripes repeat the height of the carpet. Carpet 8105.6’s colour name is also Ivory. It has a brown background with a cream colour leaf pattern. The pattern repeats in a 92cm x 92cm block.Wording on rear: Numerous. See Media.godfrey hirst, carpet, textile manufacture -
Unions Ballarat
Workers' inferno: The untold story of the Esso workers 20 years after the explosion, 2018
This book an exposition of a workplace tragedy at an Esso operation (a subsidiary of Exxon Corporation) at Longford, Victoria in 1998. A piece of processing equipment exploded and caught fire. Two workers were killed and many others were injured. The fire burned for two days. Gas supply to most customers (apart from essential services) was cut off for a significant period of time. A Royal Commission was subsequently established, during which Esso sought to minimise its own responsibility for the incident and cast blame upon the individual operators. The book is principally a story of and from the those persons who were impacted by the Longford incident.Workplace health and safety. Biographical interest.Book with bookmark; 199 pages. Cover: blue background; white, yellow and black lettering; author's name and title. btlc, ballarat trades hall, ballarat trades and labour council, biography, local history, occupational health and safety, workplace safety, esso, exxon corporation, gas, royal commissions -
Ballarat Tramway Museum
Negative - Tramcar allocation board - Geelong, early 1956
Photo shows the Tramcar allocation board - in the Geelong depot. Shows the four bogie cars in operation or available on the day the photograph was taken. Shows that some of the Meadowbank-built trams and bogie trams had already left the depot. One of a set of photos was taken between 15/2/1956 and 3/3/1956 when services operated only between Belmont and North before the final closure of the Belmont route on 25/31956 and that bogie tram 31 is not shown on the board, having gone to Ballarat on 15/2/1956 - see item 5554. See item 8213 for an article on the Geelong system by Keith Kings. Yields information about the Geelong depot allocation board that showed the location and use of the tramcars on the day.Black and white Negative - 120 sizetramways, geelong, depot, depot allocation, tramcar allocation -
Port Fairy Historical Society Museum and Archives
Photograph
John J. Huntly appears to have been the only licensee of the Royal Oak Hotel, built in 1858. Commercial Hotel Bank Street Port Fairy Formerly known as The Royal Oak and then renamed The Royal Oak in the 1990's. A verandah was added in 1900. Around 1877 the hotel various rooms for visiting doctors and a dentist. Dr Berncastle who was associated with the Sydney Eye Infirmary performed several operations there on those suffering from cataracts. It was the meeting place for the Port Fairy Freemasons, before their lodge was built in James Street and all local sporting clubs at one time or another. Also a Cobb & Co staging post.Large Black and white Photograph of the Commercial Hotel Left hand top corner in Ball point pen- PRESENTED BY MR RON McLEAN Right hand top corner in pen - COMMERCIAL HOTEL Museum Number - 62.04B.012hotel, bank street, port fairy, doctor berncastle, commercial, royal oak, sydney eye infirmary, freemasons, lodge, cobb and co, livery stables -
Wodonga & District Historical Society Inc
Functional object - Victorian Railways Oil Can/Feeder
The Victorian Railways oil can/feeder was used to oil various parts of engines of trains as part of the maintenance of trains. This would have been carried out by employees in the 'Rolling Stock Branch' of Victorian Railways, which included the maintenance and operation of locomotives and rolling stock. It was donated by a resident of Wodonga, and the Wodonga train line and train station opened in November 1873 when the section of the line from Wangaratta to Wodonga was completed. The expansion of Victorian Railways to the northeast of Victoria occurred after the Victorian Government took over the railways in 1867 and the trains serviced large towns such as Seymour, Wangaratta and Wodonga, as well as smaller towns along the way.The oil can/feeder has local significance as it was donated by a resident of Wodonga, as well as state significance as an example of the equipment used by the Victorain Railways.Grey metal Victorian Railways oil can/feeder used to oil various parts of train engines, with a long spout, handle and a chain attached to the lid."V↑R" on the proper left side.oil can, oil feeder, vintage oil cans, vintage oil feeders, victorian