Royal Australian Navy officer's peaked cap with a woven dark navy band and off-white piqued top in synthetic material. Patent leather peak is black with green underside. The cap has a black patent leather chin strap that runs across the top of the peak, secured on left and right with press stud buttons. Above the peak is an embroidered insignia of the Royal Australian Navy, a crown with an anchor underneath. Hat brim is stiffened by foam and bears a brown leather band with punched holes, presumably for ventilation. The interior lining is black.Interior tag at back of hat reads "59". Inscription on underside of hat peak is illegible.royal australian navy, navy, hat, cap, uniform

This style of jumper has a long history in the Royal Australian Navy, descending from the uniform style of the 19th century Royal Navy.Navy blue long sleeved, heavy-weight jumper with square rig collar. On left sleeve is an embroidered patch with the word "AUSTRALIA," underneath which is an anchor insignia and three downward pointing chevrons in gold embroidery thread. On right sleeve is an embroidered patch with the word "AUSTRALIA" on the upper shoulder, underneath which is an embroidered gold wheel on a semi-circle shaped patch. The jumper has a deep neckline, tied with a cotton navy tie. Accompanying collar (0036.2) attaches to the jumper via three navy blue plastic buttons at the back of the neck, and three navy blue plastic buttons running down both left and right interior neckline. The jumper has a zip on the left hand side which runs from the hem to the waist.On patches "AUSTRALIA" Interior label at back of neck reads "ADA/2001/[broad arrow]/NSN: 8405 66 132 2508/SIZE: 111 L/NO/NAME/WOOL/POLYESTER/DRY CLEAN ONLY"royal australian navy, uniform, marine, shirt, australian defence apparel, ratings

This shirt was manufactured in 2004, and was presumably owned by a Beechworth local service personnel by the name of Cross. This piece of clothing would have been worn as part of the standard Royal Australian Naval Ratings uniform.White short sleeved shirt. Square collar with thin navy blue trim. A curved slit on either side of the lower edge (near the hip area) and an extra piece of fabric within each slit. A white label with inscriptions is stitched to the seam in the middle of the lower back seam. This has n written inscription beneath on the shirt fabric.Inscriptions on the label: CAN'T TEAR 'EM 8405-66-132-3767 R.A.N 2004 SIZE: 117 35% COTTON 65% POLYESTER GENTLE WARM MACHINE WASH. RINSE WELL. WARM IRON. DO NOT SOAK. DO NOT BLEACH. DRY CLEAN (A) MADE IN AUSTRALIA Written inscription under label: CROSSshirt, naval ratings, royal australian navy, navy

Unknown donor, this item was typically worn by Army personnel for day to day duties at Base and workshops etcA day to day typical item of clothing worn by some Army personnel for their duties.Green cotton overalls. 410 mm shoulder width, 1143.5 mm length, 53 mm arm length-top of shoulder to arm end.,48mm waist width, 73.5mm leg length,62mm zip front from collar to waist., 39.5 mm collar with 75mm width.5mm sleeve cuff width., 45mm width for leg cuff. 16 mm zip length for all 4 pockets. Two pockets vertical from waist line-22.5 mm from middle of waist. Top two pockets with zip sloping from shoulder down towards centre of chest.Top of zip 11.5mm from shoulder with bottom of zip 23.5mm from shoulder. The pocket finishes at waist line-15mm from waist to lower zip position. Cloth hanger 7 by 25mm sewn on inside neck. Four pleats at lower back of coveralls.Green tag on neck: “A.G.C.F. VICTORIA 1985 ARROW SIGN SIZE 85-90SH 8405.66.060.4199 SERVICE NO . NAME............................ “ One other tag below first tag. The second tag is a tear off tag (7mm long ,8.5mm wide)made of light canvass off white colour with the following inscription within a 6.5mm width by 5.5mm deep 2mm black border “ THIS TAG IS FOR IDENTIFICATION ONLY PLEASE REMOVE BEFORE WEARING Docket No 44784/1 Order No 295024 34 Size. 85-90 SH Garment No 20273 Remarks. R 34 “ “ 29” At bottom right hand corner of white tag. army, geen

This style of collar has a long history in the Royal Australian Navy, descending from the uniform style of the 19th century Royal Navy.Rectangular shaped collar with three white parallel lines running the border of the collar. Collar is light navy on top and striped white and blue on interior. Collar is held in place with nine buttons on the jumper, there are nine corresponding machine-stitched button holes on the collar. Handwritten on the interior at the back of the neck and on the edge of the square collar is "D. KRUEGER" On interior label on right side, "A.G.C.F./SIZE. 3/8406.66.078.0013/R.A.N./MADE IN/AUSTRALIA"royal australian navy, uniform, marine, australian defence apparel, ratings, collar

Worn by an Australian Navy Warrant OfficerJacket Double Breasted Service Dress Navy Blue with rank insignia, [ Warrant Officer] on lower arms; on the upper arms; shoulder flashes with gold embroided word, "Australia" on both shoulders. 8 gold button with embossed Australian Navy Emblem and the word "Australia" in parallel columns of 4. Size 109R. Manufacturer's identification label on inside right breast.Inscriptions inside pocket 8405.66.132.2318 size.109R match. ADI logo. 5114147 Baumgarton. Trouser size.99R 70% 30% Wool/Poly. Dry clean onlywarrant officer navy australian senior service

Short sleeve khaki coloured shirt with two button down breast pockets, two plain khaki epaulettes on either shoulder fastened with a khaki coloured plastic button. Six buttons fasten the shirt down the centre front. Patch on left and right shoulders depicts three downward pointing chevrons in brown and white embroidery thread.dress uniform, pants, australian defence force

Short sleeve khaki coloured shirt with two button down breast pockets, two plain khaki epaulettes on either shoulder fastened with a light brown coloured plastic button. Six buttons fasten the shirt down the centre front, down to an unfinished, overlocked hem. Patch on left and right shoulders depicts three downward pointing chevrons in brown and white embroidery thread.dress uniform, australian defence force, shirt

Long sleeve khaki coloured shirt with two button down breast pockets, two plain khaki epaulettes on either shoulder fastened with a brown coloured plastic button. Six buttons fasten the shirt down the centre front. Patch on left and right shoulders depicts three downward pointing chevrons in brown and white embroidery thread. Sleeves are fastened with two plastic buttons on each arm. Manufacturer's label on interior back of neck.Manufacturer's label on interior back of neck reads "CLASS-8405/66-027-2495/ARMY No/NAME"dress uniform, australian defence force, shirt

The item is a representative example of previously standard issue uniform and is in excellent condition. As a set alongside 0040.2, the uniform has aesthetic significance in its design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Field shirt in disruptive pattern colours of green, khaki and browns. Long sleeve with five buttons up the front, two chest pockets with button-down flap pockets. Both sleeves are reinforced from the elbow down to the cuff; cuffs are fastened with a single plastic button. Above the right chest pocket is a patch with embroidered inscription in black thread on disruptive pattern backing. Shirt also features plain epaulette's on both shoulders, fastened by plastic button. Manufacturer's label on interior reads "ADI P/L/VICTORIA/1989/[broad arrow]/8415.66.130.0033/SIZE. 100R/NAME/SERVICE NO./MACHINE WASHABLE/DRIP DRY ONLY/DO NOT IRON/DO NOT STARCH/DO NOT BLEACH" Patch above chest pocket reads "PARKER"camouflage, uniform, australian defence force, disruptive pattern

The item is a representative example of previously standard issue uniform and is in excellent condition. As a set alongside 0040.1, the uniform has aesthetic significance in its design, incorporating the Disruptive Pattern style of camouflage which has its roots in the 1980s and continues to be adapted into uniform design by the Defence Force.Field trousers in disruptive pattern colours of green, khaki and browns. Two pockets on either hip, two pockets on both thighs fastened by two plastic buttons and one pocket on the back right side, fastened by a single button. Five large belt loops encircle waist, held in place with a dark green khaki button. Trousers fastened with a zipper and button, and adjustable tabs around hip bones. camouflage, uniform, australian defence force, disruptive pattern

This hat was worn by D. P. Bright, whilst serving in the Royal Australian Navy, presumably on the H.M.A.S. Leeuwin.Sailor's hat with removable ribbon which sits on exterior band with machine embroidered inscriptions, tied in a bow at the back. Hat is piqued, stiffened white cotton with two white eyelets on both left and right side. Dark navy band on exterior with brown leather lining on the interior, with cotton bow on interior back. On interior of hat, the hat contains a plastic lining on which there is an inscription. On either side of the inscription is a strip of beige coloured cotton lining in the shape of a semi circle (see photos).On ribbon, "H.M.A.S. LEEUWIN" On interior, "BRIGHT. D.P. HONDEN"; crossed out is the inscription "D.P. BRIGHT" Manufacturer's label reads "HILLS HATS PTY.LTD./SYDNEY N.S.W. 1972/R.A.N. 20476 6 5/8 /No./NAME/MADE IN AUSTRALIA"royal australian navy, navy, sailor, leeuwin, melville, cape leeuwin

According to the UK National Archives, the firm F. C. Chamberlain & Co. was founded by Frederick Chamberlain, who made boot uppers at West Street, Wellingborough, in 1891. In 1903, he had moved to Mill Road, and by 1903, was established in Palk Road, producing boot uppers, leggings and gaiters by 1919. These gaiters are therefore presumed to be an early example of products produced by the company.Brown leather cylindrical shaped gaiter with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the gaiter and passes through a second leather loop at the front. This strap, along with a shorter strap that is sewn into the top of the gaiter, passes through a buckle (now missing) and is tucked under two final leather loops. Interior length of gaiter is stamped with manufacturer's name. Top of gaiter also carries a small metal hook, presumably to hold layers together firmly.Embossed manufacturer's name, "F.C. CHAMBERLAIN & CO/1913"legging, gaiter, f c chamberlain & co, first world war

Khaki coloured canvas legging constructed of three panels, sewn together with beige topstitching. Gaiters fasten around leg by way of nine hooks which fit into metal eyelets; a strip of canvas runs under the foot and is buckled on the other side. One tag on interior and printed manufacturer's information on interior centre panel; printed in black.Tag reads "2-R"; printed inscription reads "2R/LEGGINGS,CANVAS, M-1938 DISMOUNTED O.D./THE BRAY COMPANY/10-27-43 W 12-036 OM 114B/72-L-61923/JEFFERSONVILLE OM DEPOT"second world war, uniform, jeffersonville

Khaki coloured canvas legging constructed of three panels, sewn together with beige topstitching. Gaiters fasten around leg by way of nine hooks which fit into metal eyelets; a strip of canvas runs under the foot and is buckled on the other side. One tag on interior and printed manufacturer's information on interior centre panel; printed in black. Cotton shoelace is fed through one eyelet at top; shoelace has one aglet and one end without an aglet.Tag reads "2-R"; printed inscription reads "2R/LEGGINGS,CANVAS, M-1938 DISMOUNTED O.D./THE BRAY COMPANY/10-27-43 W 12-036 OM 114B/72-L-61923/JEFFERSONVILLE OM DEPOT"second world war, uniform, jeffersonville

This belt was manufactured for military service. It is presumably a World War Two era article of Army uniform.This Army belt was presumably made and used during the World War Two era and therefore has historic value. Brown leather belt with a brass buckle. The belt has twelve holes in two rows at one end for fastening into the buckle. The very tip narrows to a point. There is light brown stitching along the edges of the belt. There are two brass studs which hold the leather in a loop of the other end. There is an additional piece of leather fixed to this looped edge for holding the other end in place. The buckle is made of a silver coloured brass and has two rods which pass through two of the twelve holes for fastening. The buckle also exhibits blue/green copper corrosion in several areas. belt, war, uniform, army, royal australian army, world war two, ww2, wwii, second world war

The Type 62 is a re-badged British Pattern 1907 bayonet. Siam purchased 10,000 SMLE rifles and Pattern 1907 bayonets from Britain in 1919 to equip the "Wild Tiger Corps," royal bodyguard of Vajiravudh, King Rama VI (reigned 1910–1925). The tiger figural on the ricasso is representative of the Wild Tiger Corps. Year 2462 on the Buddhist Calendar corresponds to 1919. SMLE rifles and Pattern 1907 bayonets were taken from British stocks, refurbished by Birmingham Small Arms (BSA), and remarked with Siamese markings. The bayonets were shipped with standard steel-mounted leather scabbards. However, the leather rapidly deteriorated in the tropical climate, so the Siamese made a replacement steel scabbard body to which the original steel mounts were brazed. Scabbard bayonet metallic slightly tapered rectangular with rounded edges; oval belt nob on blazed steel top of the bayonet and a blazed steel bottom; the body is steel with dents and a wear holes on one side.ww2, world war 2, bayonet

According to the UK National Archives, the firm F. C. Chamberlain & Co. was founded by Frederick Chamberlain, who made boot uppers at West Street, Wellingborough, in 1891. In 1903, he had moved to Mill Road, and by 1903, was established in Palk Road, producing boot uppers, leggings and gaiters by 1919. These gaiters are therefore presumed to be an early example of products produced by the company.Brown leather cylindrical shaped gaiter with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the gaiter and passes through a second leather loop at the front. This strap, along with a shorter strap that is sewn into the top of the gaiter, passes through a buckle (now missing) and is tucked under two final leather loops. Interior length of gaiter is stamped with manufacturer's name. Top of gaiter also carries a small metal hook, presumably to hold layers together firmly.Embossed manufacturer's name, "F.C. CHAMBERLAIN & CO/1913"legging, gaiter, f c chamberlain & co, first world war

Brown leather cylindrical shaped gaiter with one leather strap for fastening. One strap is attached to the lower edge of the interior with a metal pin. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the gaiter and passes through a second leather loop at the front. This strap appears to pass through two rectangular cut out holes. The edges of the gaiter are unfinished and all elements are affixed through metal pins rather than stitching.Stamped in black ink on interior is the word "WONDER" alongside other illegible markings.legging, gaiter, first world war

Brown leather cylindrical shaped gaiter with two leather straps for fastening. One strap is attached to the lower edge of the interior with a metal pin. This crosses over the lower exterior and passes through a leather loop at the front. The strap then wraps around the gaiter and passes through a second leather loop at the front. This strap appears to pass through a buckle at the top of the gaiter. Another strap is passed through multiple rectangular cut out holes and secures to a second buckle.The edges of the gaiter are unfinished and all elements are affixed through metal pins rather than stitching.Stamped in black ink on interior is the word "WONDER" alongside other illegible markings.legging, gaiter, first world war

This legging is part of a pair of leggings which presumably would have been worn by a cavalry soldier in the Royal Australian Army to protect the lower legs when riding in armed conflict. This item most likely dates to the World War One era.As an article of WWI protective clothing for use in armed conflict by a cavalry soldier, this item is of historic value. Brown leather cylindrical shaped legging with two leather straps for fastening. One strap is attached to the lower edge of the interior. This crosses over the lower exterior and passes through a leather loop at the front, which is attached by four metallic nails. The strap then wraps around the gaiter and passes through a second leather loop at the front, which is also attached by four corroded metallic nails. This strap (along with a shorter strap that is sewn and nailed into the top of the legging) pass through two buckles. The upper buckle is made of brass and the lower is made of steel. The straps then tuck under three final leather loops, two of which are bolted to the legging with three corroded nails. There should be a third loop here that is missing. Top corner of legging also carries a small corroded metal hook, presumably to hold layers together firmly.legging, gaiter, first world war, world war one, world war 1, wwi, ww1, war, army, uniform, royal australian army, the great war

These boots had a metal plate inserted in sole to protect the feet of personnel wearing boot. This was after earlier boots without this protection did not protect the wearer from sharpened spikes eg bamboo set in pits or “punji” pits, during the Vietnam war. The laces were done up by knotting one end,threading from bottom hole across to opposite hole,up next hole on same side,across to opposite hole etc. This meant that only one loop per opposite holes was all exposed for a quick and easy cutting to release the boot in case of injury to wearer.These boots were typically worn on parade,training and in combat during the Vietnam war era and after.The LEFT boot solid black leather uppers with split leather tongue sewn to sides - making the boot semi water and insect proof.The sole is hard black rubber compound with 7 cleats on sole and 3 cleats on heel,all part of rubber sole. Woven black cotton laces. 30 mm leather reinforcing strip sewn on inside top of boot. 11 by 5mm metal holes per boot for laces. Sole is welded on. “Dunlop made in Australia” and “5/5” on sole in front of heel. Inscribed on top reinforced inside leather band is- “ B 22 R.B.T 1439 188” on one side and “ 5/6” on the other.boots, general purpose, g.p., vietnam war

This original set of medals and memorabilia were donated/bequeath to the Beechworth RSL Sub-Branch by Captain Nankervis’ family. The inscription on the framed box containing the Medal Bar reads, “These medals were awarded to Captain Dick Nankervis for service during World War I and World War II. Part of the Nankervis Collection, there is a lengthy word document in the Media Section6 Court Mounted WWI and WWII medals; laid on green felt, in a wooden display case Measuring 300mm x 220mm with non reflective glass front and metal bar with an engraved inscription Metal Bar measuring 20 x 160 mm engraved with "This original set of medals and memorabilia were donated/bequeath to the Beechworth RSL Sub-Branch by Captain Nankervis’ family. The inscription on the framed box containing the Medal Bar reads, “These medals were awarded to Captain Dick Nankervis for service during World War I and World War II". wwi war medals, wwii war medals, rack of six medals, military medal

(15C gold shield worn on FOB chain) inscription – “presented by the Bethanga Friends in recognition of service abroad. Jan 1920" Presented to Dick Nankervis following his return from active service in WWIRefer to the Word Document in the media file of item 0048Heraldic shield shaped 15C gold medallionFront - cross rifles below a crown with decorative engraving on the edges; mounting ring at centre top of shield Back - Engraved messagemedallion, gold, world war 1, wwi, heraldic shield

This gas mask dates to 1942 in the Second World War. This mask is representative of a style of gas mask that was widely distributed during the Second World War, and can be found in other Australian collections. Rubberised face mask with two circular plastic windows with metal rim for sight by wearer. The mask is fitted by six black elastic straps with red and yellow stripes, which are attached via metal buckles at six points at the top, middle and bottom of the face. Straps converge on rubber backed fabric cross-shaped component which is stamped. Over mouth area is a filter comprised of several layers of metal sheeting with holes. At chin, a metal fitting fits into a black rubber concertina tube which fits into the top of a rounded rectangular container with ribbed edges. Both attachment points have what appears to be adhesive fabric tape wrapped around the closure, possibly to make the system air tight.On cross-shaped component, "No 410/22-12-42" Stamped on mask, "O.T.R.C/6/42", "NORMAL" Filter mask stamped with, "EBRO/1942", "No 4/G.P. 1942" Canister stamped with "WILLOW/[broad arrow]/ML42(?)3/GS174". On canister base "No4A/WILLOW/1942/257/EVI" gas mask, breathing apparatus, chemical warfare, second world war, world war ii, world war 2

This webbing belonged to Warrant Officer 2 ,William Addison Payne who served with 8th Australian Recce BattalionCanvas with two straps one end and two buckles the other end.The top of gaiter curved down approx.30mm at ends from centre.Likewise, the bottom of gaiter.WO 11. Payne W A VX 113620gaiter, anklets, short

Stainless steel metal tray, rectangular in shape with rounded corners and six trapezoid shaped concave sections to hold food. Tray appears to be constructed from a single sheet of metal, embossed and folded at edges to create a smooth edge. Four steel nails or rivets are on each corner on reverse but do not push through to front side.Top of tray embossed with "D [broad arrow] D/45" and "Simpson/S"mess, dining, second world war, world war 2, world war ii

This anklet belonged to Warrant Officer, William Addison Payne who enlisted in QLD for the 8th Australian Recce BattalionCanvas with two straps one end and two buckles the other end.The top of gaiter curved down approx.30mm at ends from centre.Likewise, the bottom of gaiter.WO 11. Payne W A VX 113620 W A PAYNEgaiter

Photograph of 3 sqn RAAF personnel embarking for the Middle East. Signatures on accompanying document signed by Ken Williams, RW Sterrett, MR Campbell, J.H. Christie, JH McKinnon and F Finch. The personnel shown boarding are all in RAAF uniform. It was customary at the time to board units together, generally in the order of seniority, which was accepted as Navy first, Army second and RAAF third.Black and white photograph of troops boarding an Orient Line ship."3 sqdn embarking for ME." Written on top of photograph. "Army, Navy & RAAF leave for Middle East July 1940" written on rear of photograph. world war ii, second world war, orient line