Brought by Dutch migrants as part of kitchen apparatus.Sieve with green plastic handle and two hooks to hold sieve over bowl. Detachable Y-shaped steel frame apple sauce roller inside sieve, designed to fit over the handle and hook onto rim on opposite side, has turning handle with green wooden knob, a wooden egg-shaped roller, to force apple sauce through sieve, and metal paddle to scrape sauce from sieve. Cooked apple sauce was placed in sieve and pushed through mesh by turning handle to produce the fine apple sauce beloved by the Dutch.household item

This item was owned and used by Alice Pow (nee McWilliam), known as Maccie. Maccie was a nurse who came to Orbost in 1936. She was highly respected in Orbost for her nursing skills particularly during the 1938 outbreak of polio, Most patients were cared for in their homes and Miss McWilliam was sent out to care for them. Over 14 months she travelled 9560 miles supervising their treatments. She eventually married Mr Hec Pow who had been left to bring up his three daughters after his wife died.. The Pows lived in Orbost where Hec Pow was worked with his father Fred at the saw mill in Cabbage Tree. Maccie Pow was a member of the Orbost Bowling Club, Red Cross and Orbost Golf Club.An oval shaped metal food cover made of pressed tin painted tan. It has a loop handle on the top. The sides slope outwards and it is seamed on both sides. The bottom edge is rolled. The sides have a perforated design for air flow.food food-protection kitchen-ware pow-maccie mcwilliam-alice

This sheet of copper sheathing or muntz metal has been recovered from the sea. It has been damaged by reaction of the metals to the sea, it has encrustations from the sea such as sand, and other damage has caused the edges to break away or fold over. ABOUT MUNTZ Early timber sailing ships had a problem of the timber hulls being eaten through by the marine animals called Teredo Worms, sometimes called ‘sea worms’ or ‘termites of the sea’. The worms bore holes into wood that is immersed in sea water and the bacteria inside the worms digest the wood. Shipbuilders tried to prevent this problem by applying coatings of tar, wax, lead or pitch onto the timber. In the 18th and 19th centuries the outside of their ships were sheathed in copper sheathing or a combination of 60 percent copper and 40 percent zinc (called Muntz metal). The ships would be re-metalled periodically to ensure the sheathing would remain effective. In more recent times the ships are protected with a toxic coating. ABOUT THE SCHOMBERG When the ship Schomberg was launched in 1855, she was considered the most perfect clipper ship ever to be built. James Blaine’s Black Ball Line had commissioned her to be built for their fleet of passenger liners. At a cost of £43,103, the Aberdeen builders designed her to sail faster than the quick clippers designed by North American Donald McKay. She was a three masted wooden clipper ship, built with diagonal planking of British oak with layers of Scottish larch. This luxury vessel was designed to transport emigrants to Melbourne in superior comfort. She had ventilation ducts to provide air to the lower decks and a dining saloon, smoking room, library and bathrooms for the first class passengers. At the launch of Schomberg’s maiden voyage, her master Captain ‘Bully’ Forbes, drunkenly predicted that he would make the journey between Liverpool and Melbourne in 60 days. Schomberg departed Liverpool on 6 October 1855 with 430 passengers and 3000 tons cargo including iron rails and equipment intended the build the Geelong Railway and a bridge over the Yarra from Melbourne to Hawthorn. The winds were poor as Schomberg sailed across the equator, slowing her journey considerably. She was 78 days out of Liverpool when she ran aground on a sand-spit near Peterborough, Victoria, on 27 December; the sand spit and the currents were not marked on Forbes’s map. Overnight, the crew launched a lifeboat to find a safe place to land the ship’s passengers. The scouting party returned to Schomberg and advised Forbes that it was best to wait until morning because the rough seas could easily overturn the small lifeboats. The ship’s Chief Officer spotted SS Queen at dawn and signalled the steamer. The master of the SS Queen approached the stranded vessel and all of Schomberg’s passengers were able to disembark safely. The Black Ball Line’s Melbourne agent sent a steamer to retrieve the passengers’ baggage from the Schomberg. Other steamers helped unload her cargo until the weather changed and prevented the salvage teams from accessing the ship. Local merchants Manifold & Bostock bought the wreck and cargo, but did not attempt to salvage the cargo still on board the ship. They eventually sold it on to a Melbourne businessman and two seafarers. After two of the men drowned when they tried to reach Schomberg, salvage efforts were abandoned. In 1975, divers from Flagstaff Hill, including Peter Ronald, found an ornate communion set at the wreck. The set comprised a jug, two chalices, a plate and a lid. The lid did not fit any of the other objects and in 1978 a piece of the lid broke off, revealing a glint of gold. As museum staff carefully examined the lid and removed marine growth, they found a diamond ring, which is currently on display in the Great Circle Gallery. Flagstaff Hill also holds ship fittings and equipment, personal effects, a lithograph, tickets and photograph from the Schomberg. Most of the artefacts were salvaged from the wreck by Peter Ronald, former director of Flagstaff Hill. The Schomberg, which is on the Victorian Heritage Register (VHR S612), has great historical significance as a rare example of a large, fast clipper ship on the England to Australia run, carrying emigrants at the time of the Victorian gold rush. She represents the technical advances made to break sailing records between Europe and Australia. Flagstaff Hill’s collection of artefacts from the Schomberg is significant for its association with the shipwreck, The collection is primarily significant because of the relationship between the objects, as together they have a high potential to interpret the story of the Schomberg. It is archaeologically significant as the remains of an international passenger Ship. It is historically significant for representing aspects of Victoria’s shipping history and for its association with the shipwreck and the ship, which was designed to be fastest and most luxurious of its day Copper sheathing or "Muntz metal" - 60% copper and 40% zinc, used to line the hull of the Schomberg to prevent shipworm infestation. Recovered from the wreck of the Schomberg. There are 11 irregular shaped small pieces. Verdigris, nail holes and slight encrustation.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, schomberg, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, muntz, muntz metal, copper sheating,, copper sheathing, teredo worms, sea worms, sea termites, ship building

This gas fitting was recovered from the wreck of the Loch Ard circa 1970, at the time of the discovery of the wreck. HISTORY OF THE LOCH ARD: - The LOCH ARD belonged to the famous Loch Line which sailed many ships from England to Australia. Built in Glasgow by Barclay, Curdle and Co. in 1873, the LOCH ARD was a three-masted square rigged iron sailing ship. The ship measured 262ft 7" (79.87m) in length, 38ft (11.58m) in width, 23ft (7m) in depth and had a gross tonnage of 1693 tons. The LOCH ARD's main mast measured a massive 150ft (45.7m) in height. LOCH ARD made three trips to Australia and one trip to Calcutta before its final voyage. LOCH ARD left England on March 2, 1878, under the command of Captain Gibbs, a newly married, 29 year old. She was bound for Melbourne with a crew of 37, plus 17 passengers and a load of cargo. The general cargo reflected the affluence of Melbourne at the time. On board were straw hats, umbrella, perfumes, clay pipes, pianos, clocks, confectionary, linen and candles, as well as a heavier load of railway irons, cement, lead and copper. There were items included that intended for display in the Melbourne International Exhibition in 1880. The voyage to Port Phillip was long but uneventful. At 3am on June 1, 1878, Captain Gibbs was expecting to see land and the passengers were becoming excited as they prepared to view their new homeland in the early morning. But LOCH ARD was running into a fog which greatly reduced visibility. Captain Gibbs was becoming anxious as there was no sign of land or the Cape Otway lighthouse. At 4am the fog lifted. A man aloft announced that he could see breakers. The sheer cliffs of Victoria's west coast came into view, and Captain Gibbs realised that the ship was much closer to them than expected. He ordered as much sail to be set as time would permit and then attempted to steer the vessel out to sea. On coming head on into the wind, the ship lost momentum, the sails fell limp and LOCH ARD's bow swung back. Gibbs then ordered the anchors to be released in an attempt to hold its position. The anchors sank some 50 fathoms - but did not hold. By this time LOCH ARD was among the breakers and the tall cliffs of Mutton Bird Island rose behind the ship. Just half a mile from the coast, the ship's bow was suddenly pulled around by the anchor. The captain tried to tack out to sea, but the ship struck a reef at the base of Mutton Bird Island, near Port Campbell. Waves broke over the ship and the top deck was loosened from the hull. The masts and rigging came crashing down knocking passengers and crew overboard. When a lifeboat was finally launched, it crashed into the side of LOCH ARD and capsized. Tom Pearce, who had launched the boat, managed to cling to its overturned hull and shelter beneath it. He drifted out to sea and then on the flood tide came into what is now known as LOCH ARD Gorge. He swam to shore, bruised and dazed, and found a cave in which to shelter. Some of the crew stayed below deck to shelter from the falling rigging but drowned when the ship slipped off the reef into deeper water. Eva Carmichael had raced onto deck to find out what was happening only to be confronted by towering cliffs looming above the stricken ship. In all the chaos, Captain Gibbs grabbed Eva and said, "If you are saved Eva, let my dear wife know that I died like a sailor". That was the last Eva Carmichael saw of the captain. She was swept off the ship by a huge wave. Eva saw Tom Pearce on a small rocky beach and yelled to attract his attention. He dived in and swam to the exhausted woman and dragged her to shore. He took her to the cave and broke open case of brandy which had washed up on the beach. He opened a bottle to revive the unconscious woman. A few hours later Tom scaled a cliff in search of help. He followed hoof prints and came by chance upon two men from nearby Glenample Station three and a half miles away. In a state of exhaustion, he told the men of the tragedy. Tom returned to the gorge while the two men rode back to the station to get help. By the time they reached LOCH ARD Gorge, it was cold and dark. The two shipwreck survivors were taken to Glenample Station to recover. Eva stayed at the station for six weeks before returning to Ireland, this time by steamship. In Melbourne, Tom Pearce received a hero's welcome. He was presented with the first gold medal of the Royal Humane Society of Victoria and a £1000 cheque from the Victorian Government. Concerts were performed to honour the young man's bravery and to raise money for those who lost family in the LOCH ARD disaster. Of the 54 crew members and passengers on board, only two survived: the apprentice, Tom Pearce and the young woman passenger, Eva Carmichael, who lost all of her family in the tragedy. Ten days after the LOCH ARD tragedy, salvage rights to the wreck were sold at auction for £2,120. Cargo valued at £3,000 was salvaged and placed on the beach, but most washed back into the sea when another storm developed. The wreck of LOCH ARD still lies at the base of Mutton Bird Island. Much of the cargo has now been salvaged and some was washed up into what is now known as LOCH ARD Gorge. Cargo and artefacts have also been illegally salvaged over many years before protective legislation was introduced. One of the most unlikely pieces of cargo to have survived the shipwreck was a Minton porcelain peacock - one of only nine in the world. The peacock was destined for the Melbourne International Exhibition in 1880. It had been well packed, which gave it adequate protection during the violent storm. Today, the Minton peacock can be seen at the Flagstaff Hill Maritime Museum in Warrnambool. From Australia's most dramatic shipwreck it has now become Australia's most valuable shipwreck artefact and is one of very few 'objects' on the Victorian State Heritage Register. Flagstaff Hill’s collection of artefacts from LOCH ARD is significant for being one of the largest collections of artefacts from this shipwreck in Victoria. It is significant for its association with the shipwreck, which is on the Victorian Heritage Register (VHR S417). The collection is significant because of the relationship between the objects, as together they have a high potential to interpret the story of the LOCH ARD. The LOCH ARD collection is archaeologically significant as the remains of a large international passenger and cargo ship. The LOCH ARD collection is historically significant for representing aspects of Victoria’s shipping history and its potential to interpret sub-theme 1.5 of Victoria’s Framework of Historical Themes (living with natural processes). The collection is also historically significant for its association with the LOCH ARD, which was one of the worst and best known shipwrecks in Victoria’s history. Copper gas pipe and fitting. Tow C-shaped pipes with fittings at each end. One end of each pipe is joined to the other pipe, making a U-shape. It was recovered from the 1878 wreck of the ship Loch Ard in the 1970s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, loch line, loch ard, captain gibbs, eva carmichael, tom pearce, glenample station, mutton bird island, loch ard gorge, copper gas pipe and fitting, copper gas pipe

This plate was made by the Calyx Porcelain and Paint Company which was based in Western Australia and made china for commercial establishments from the 1920s to the 1990s when the company was then known as Australian Fine China. The plate was used by the Belfast and Koroit Steam Navigation Company based in Port Fairy. It was founded in 1882 and operated two ships, the Casino and the Bellinger, servicing the Western Ports between Melbourne and Portland. The Casino was wrecked at Apollo Bay in 1932. Later the company operated the ship, Dawn and survived as a shipping company until the late 1930s.This plate is of interest because it was used by the Belfast and Koroit Steam Navigation Company in the 1920s and 30s. This company was important in the maritime history of Warrnambool, especially in the transportation of potatoes from the Warrnambool region. The Casino, the most important ship operated by the Belfast and Koroit Steam Navigation Company, was also important as a passenger and cargo ship prominent in Warrnambool’s maritime historyThis is a circular-shaped cream soup bowl or dinner plate. On the edge of the plate there is a blue embedded stamp in the shape of a circle with the flag of the steamship company inside. On the base of the plate is the maker’s information in green print. The base of the plate is much crazed and discoloured‘Belfast & Koroit S.N. Co. Ltd.’ ‘Made in Australia, Calyx, W.A.’ belfast & koroit steam navigation company, history of warrnambool

Insulates electrical wire/cable which is attached between the narrow and wide ends of the 'bell' shape (in the groove). Screwed onto the cross arm of a power pole. Non conductive so electricity doesn't short out to the ground.Used on power poles in the Kiewa Valley.White porcelain bell shaped insulator with an indent between the wide open end and the narrow closed end. The indent is for the wire/cable to be attached. The wide end is open with a white porcelain cylinder inside narrowing to thread for screwing, in the narrow section. kiewa hydro electric scheme. electricity. power lines. insulator.

These two trays appear to have been made as souvenirs, perhaps to commemorate the end of World War One, as the halfpennies date from 1914 to 1918. They may have been used either as ash trays or trinket trays.These trays have no known local significance but are retained as mementos of the souvenirs produced for the Australian tourist market after World War One.These are two circular-shaped brass ash trays or dishes. One has five English halfpennies affixed to the edge of the tray and one has the Rising Sun emblem of the Australian Army affixed to the centre of the tray. Both trays are slightly stained.‘English made’world war one, history of warrnambool

This packaging formed part of a container holding Sungold Milk in 1978. Sungold Dairies were based in Kepler Street Warrnambool before moving to Verdon Street. In 1988 the site in Verdon Street was sold to Macdonalds fast food business and later to Guyetts funeral business. Sungold milk is now produced at the Warrnambool Cheese and Butter Factory at Allansford and today is the chief local supplier of fresh milk. This packaging, produced when the business was located in Verdon Street, was made to mark the centenary of the wreck of the Loch Ard. This ship, wrecked in 1878 near Port Campbell, attracted much attention, not only because of the loss of over 50 lives, but also because the story of the two survivors has become part of local folklore. This packaging is of minor interest as a reminder of the promotional material produced at the time of the centenary of the wreck of the Loch Ard in 1978.This is the cut-down piece of packaging that contained fresh milk. It is one piece of light card folded to make a rectangular-shaped container. The sides have a white background with green and white printing and images of gold suns and ships and a sketch of a coastline. Sungold Milk Full Cream Pasteurised Milk One Litrewarrnambool, sungold, sungold dairies allansford, milk carton

This bed pan was used in the past for patients in hospitals and other places where there were bedridden people. Bed pans are still used in these circumstances but they are now made of materials that are more easily sterilized. This item has no known local provenance but it is an interesting example of hospital equipment used in the past and will be useful for display. This is a spherical-shaped white china bowl with a pointed end and with the opening partly covered at the smaller end. It has a china handle at the top section. There are three drainage holes at the bottom of the smaller end. Inside the bowl at the top section there is black printing. The New Slipper Bed Pan This slipper should be passed under the Patient in front between the legs. If a flannel cap is made for the blade fastened by strings under the handle considerable comfort will be afforded. vintage hospital equipment, history of warrnambool

These badges were produced for the Commonwealth Button Fund to raise funds for the victims of the Armenian massacre in the Ottoman Empire during World War One. The button was designed by Frances Woolcot the Honorary Organiser of the Melbourne Branch of the Commonwealth Button Fund. The buttons were sold late in February 1918 and raised 7,300 pounds for the victims.February These badges are of interest as an example of the Australian fund raising efforts during World War One for a specific group of people - in this case the victims of the Armenian massacres..1 Concave metal badge featuring sky, a minaret, two onion shaped domes, buildings, sand, three mounted camels and palm trees. There is a clip pin on the reverse. .2 As for .1 but discoloured and there is no slot into which the pin may be inserted. SERVIA SYRIA ARMENIA

This box once contained cigarettes supplied or sold by the Warrnambool Club. This club was formed in 1873 as a social club for men of the more affluent and professional classes in Warrnambool and district. The club rooms were originally in the Warrnambool Club Hotel established by John Amon Smith in Kepler Street between Timor and Koroit Streets. By 1876 Warrnambool Club membership had grown to 70 and the premises at the hotel were considered too small. A new Warrnambool Club building was opened in 1877 in Kepler Street and this building and the club still exist today. Nothing is known of Samuel Dempster except that he was Irish-born and served in World War Two. This box is of minor interest as a memento of the Warrnambool Club in the mid 20th century and of Samuel Dempster whose connections to Warrnambool are not at this time known. This is a rectangular-shaped cardboard box with a hinged lid pasted at the centre. The box is buff-coloured with gold printing and handwriting in black ink on the top of the lid. The lid has originally been gilt-edged but most of this has been rubbed off. Warrnambool Club Special Virginia Cigarettes (Plain) Mr Samuel Dempster C/O Mr K. J. Brumby Koonji Ballangeichsamuel dempster, warrnambool club

Cutaway of round for display and education purpose.Ammunition round 20 mm brass shell and cutaway of projectile for education purposes. Brass shell tapered cone shape with rim at base for ejection of round and detonator at end. The projectile is cone shaped with yellow plastic covering half the round.On brass shell - 20 mm - DS - MK - AN 149. Mod 1 ALN073. WC859 LOT 83. ADI 11/01.ammunition, round, inert, display

This design Italian flag dates from 1848 - 1946. This one was taken at Derna in Libya between 10th - 15th November 1942. It was brought home to Australia by Alex ARCHER, No 40637, 3 Sqaudron RAAF. Refer Cat No 2597 for his service details.Italian battle flag made of coarsely woven cotton. Left 1/3 green, right 1/3 red, centre 1/3 white with a centred white cross on red background surounded by a blue shield shaped borderThere are no inscriptions or markings. The centre piece in the white area is the Italian Naval Ensign.flags-military, italian

Shoulder patch is 2/4th Australian light anti-aircraft regimentArmy great coat, khaki wool, has metal shoulder badges reading “Australia”. Shoulder flashes T shaped denoting Tobruk, red centre T with triangular wedge shape greyish colour, white outline around shape.uniforms - army, costume - male uniform, great

These uniform patches belonged to Clarence W Curnow VX100151, 2nd AIF. Refer Cat No 1444, 1445.2.1) Colour Patch, square shaped. Felt material, grey outside colour. Internal SQ Red & Dark Blue, centre is light blue with a circle in the centre grey in colour signifing unit identity .2) Same as Cat No 1449.1 badges, colour patches, unit idenification

Historically this item was used before the spirit and the electrical iron took over Circa 1930s -1950s. The main body of the iron was placed on a flat heated surface of a stove (wood, coal or gas fired). It was mainly used by women in their domestic role, ironing the family clothes and linen. In the Kiewa Valley the supply of coal or gas was not available or too expensive than the locally cut hard wood trees. This particular iron was an improvement on the fixed handled iron because it allowed (by use of its easily detachable handle) to use multiple bases and thereby allowing a constant heat supply to be maintained and not having to waste time for a base to reheat to the required level of application.The significance of this item was that it allowed for a faster method of ironing clothes and linen. It's invention was a progress towards reducing the time it took to undertake a very labour and intensive domestic function. The reduction of time taken for this household duty provided women great flexibility to undertake other activities. These type of improvements to basic domestic tasks liberated housewives not only physically but also mentally from the isolation of the home environment.This flat iron has a removable, clip-on handle. The handle and its release knob are of wood. The base of the handle together with the heavy flat body are made of cast iron. The body of the iron is oval shaped tapered at each end and is 40mm thick.Underneath the handle frame and on the main body, on one side, in raised lettering is "Mrs Potts" and on the other side "Iron". Both are clearly visible when viewed from an aerial position. Under removable handle and on a plate (screwed onto the main body) is "No 2"iron, antique, household, pressing clothes, domestic, laundry

This patch is one of two patches attached to the interior underarm seams of jacket 0033.1, as a means of reducing staining from sweat of the wearer.Oval shaped patch formed from four pieces of material (four semicircles), overlocked around the circumference in cream stiching. Patches are cream in colour with brown staining throughout. Patches are cotton on one side and a resistant/treated fabric on the reverse. summer uniform, sweat pad, military uniform

This patch is one of two patches attached to the interior underarm seams of jacket 0033.1, as a means of reducing staining from sweat of the wearer.Oval shaped patch formed from four pieces of material (four semicircles), overlocked around the circumference in cream stiching. Patches are cream in colour with brown staining throughout. Patches are cotton on one side and a resistant/treated fabric on the reverse. summer uniform, sweat pad, military uniform

A fuel iron with a small cream-porcelained body and black handle . The back is a bulb-shaped container for holding the fuel. This is a kerosene operated Tilley Model DN 250n iron. It has a regulating generator which enables the user to control the heat. iron domestic fuel-iron

In 1875-78 and 1883-89 Councilor John King was elected as a member of council. He was appointed Shire President in 1887-88.This photo forms part of Original Historic Photo of councilors for 1885-86. Sepia photo of Councilor John King is oval and set third from bottom of right side of " horse shoe" shaped light grey mount and on a deeper grey mount, it is edged with gold.It is part of composite photos of councilors for 1885-86." PRESENTED BY THE PRESIDENT G.RENNIE.ESQ. TO THE BALLARAT SHIRE COUNCIL 1885-86 ".1885 1886, ballarat shire council, king john

In 1912 Mr. W.W.Walker was a member of the Learmonth ANA Branch No 75. This photo is part of the original collection of photos showing all 1912 Learmonth ANA Branch No 75.Black and white photo is of Mr. W.W.Walker.It is set in a brown woodgrain look mount rectangular with a shaped top.Third from right in bottom row ,it is part of a collection of photos showing all 1912 members of the Learmonth ANA B ranch No 75.LEARMONTH BRANCH NO 75.PRESENTED TO C.MEDWELL,ESQ.BY HIS FELLOW MEMBERS AS A MARK OF ESTEEM & APPRECIATION OF VALUABLE SERVICES RENDERED TO THE BRANCH AS SECRETARY.LEARMONTH 1912.w w walker 1912, learmonth ana branch no 75

Enamel cookware became very popular because people wanted a way of coating iron to stop metallic tastes or rust getting into food: something acid-resistant and easy to clean without laborious scouring, something more durable than the tin linings used inside copper. Enamelware dates back to 1760 in Germany.This object is significant as an example of an item in common use in the 19th and early 20th centuries.Oblong shaped enamel dish. The white enamel has been discoloured on the inside and much rust has occurred. The remains of a blue enamel line around rim.Two large rust holes in base, and a small rust hole near rim. None.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, enamel, kitchenware, baking

Servind Dish lid, China, blue and white floral design, scalloped rim edge with small handle attached to the top, centre of lid is raised to an ovular shaped point. Recovered from the wreck of the Loch Ard. Previous No PWO 2695.2. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, lid, loch ard

Bossing Mallet, wooden (Boxwood or lignum vatae) head conical shaped and has three grooves around circumference. End of handle is bulbed, has a groove around circumference and a hole through handle. Used by plumbers for forming lead sheetflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bossing mallet

This boat hook head is in very good condition and has been manufactured. It would be attached to a pole or handle to give it a long reach. A boat hook is a common piece of marine equipment and many have been made by boat owners to suit their own purpose. They would also have been forged byblacksmiths and shipsmiths and have been available from ship's chandlers over the centuries. A boat hook can be used for many situations such as catching mooring ropes and chains, reaching rigging, pulling things or people out of the water, and a variety of fishing applications.This boat hook head is an example of equipment carried on vessels over hundreds of years for safety purposes and for general applications. Marine boat hook head, all brass. The body is a conical shape with a pointed end and curved, horn-shaped hook moulded into the side. The body is hollow until it reaches the hook's height. A screw hole is close to the base, in line with the hook.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, boat hook, marine, fishing, boating, equipment, boat hook head, rigging, safety equipment

Unit plaque made of wood and brass. Shield shaped. Unit name on scroll. Black and white atomic symbol with central disc. Red top half black bottom half with "131" in middle. Chinese dragon. Brass plate at bottom.Presented to Gunner B E Blink SVN Jun 67 May 68 - engraved on brass plate on bottom of plaque, 1 ATF Det 131 Div Loc Bty RAA (on heraldic scroll)raa, unit plaque, 131 div location battery, shield, welcome home parade

Cross cut saws have been used for millennia, but they came into wider usage in Europe from the 15th century onwards. The term 'cross cut' refers to the blades on the saw’s cutting edge which come in a variety of different patterns. These saws are specifically designed for cutting across the grain of the wood by timber workers, sawyers, and other land workers for tree felling and cutting up larger pieces of lumber into smaller more manageable pieces. The saws come in variable sizes and lengths and are designed for use by one or two people. With the two-man saws, a method of alternating 'pull and push' to drag the blade back and forth through the timber, maximising efficiency and labour division. Donated by Wilfred Dungan on behalf of the Dungan family Collection originally used on the property of the late Dr Rae Dungan in Falls Creek Rd Olinda, purchased in the late 1930s from Olinda pioneers Harry and Minnie Holden. Also on the property of late May Farndon of Farndon’s and Falls Rd Mt Dandenong – aunt of Dr Rae William Dungan and also an early pioneer. Family holidays and weekends involved use of these sorts of farm implements plus working with horses. Post-war, the Olinda hand tools and machinery moved to the Shady Creek, Nilma North area where bush, pasture and cows had replaced the Olinda property. Wilfred well remembers being on one end of the crosscut saws cutting fence posts, logs and timber under “the tireless and vocal instruction” of a red headed local Darnum Rd legend called Harry Collyer. “He drove an old Rugby car and nearly pulled me through the logs with every cut!” Two handled cross cut saw. One manufactured handle and one bush replacement wedged with three inch nail. 6 broken teeth. Rivets for handle broken off at home-made end. M shaped tooth profile.churchill island, crosscut, saw, tool