Early Industrial Timber working sawHistoric - Early Industrial Timber working sawLong metal hand saw.saw, metal, metal saw, hand saw

Used by Colour Sgt Cordwell, grandfather of John Cordwell, past President of Sub-Branch.On loan from John Cordwell's Family (past president of the Montmorency RSL)Nickel plated silver coloured brass metal military whistle and woven brown leather neck loop. The leather neck loop is attached to the body of the whistle by a small circular steel metal key ring. A metal post with a hole attaches the key ring to the whistle. The whistle has a small light brown coloured wooden pea.Premier Wire Works Melbourne Australia 1944 Marked with the Broad Arrowcordwell whistle, military, metal

Metal scoop commonly used in industrial kitchens. U-shaped with handle.On handle base: TAIWANindustrial kitchen, metal, moulding

Metal statue of Elephant, black with white tusks and toenails, trunk down.ornaments, metal, statue

From the Till collectionMetal photo frame with wooden back. Frame has pattern of flowers and leaves around bottom and side edges and the RAAF insignia on the top.ornaments, metal

This was the House Cup of a Warrnambool private school, Braemar Grammar. It operated from 1931 to 1950 and was in Manifold Street. The school had an average enrolment of 45 primary school students and closed because of the unavailability of suitable school premises. The donor of the House trophy, Dr Alfred Brauer, was born in South Australia and studied medicine at Melbourne University. He had a practice in Koroit Street Warrnambool for 45 years and had many community interests including horse racing, football, golf, cricket and education. He was associated with Warrnambool High School, Braemar Grammar School and Warrnambool Technical School, donating trophies to all three schools. Today the former Warrnambool Technical School is called Brauer College. This cup is of interest as a memento of a 20th century private school in Warrnambool, Braemar Grammar and of a prominent 20th century doctor in Warrnambool, Dr Alfred Brauer.This is a gold-coloured metal cup with two side handles and a long thin stem on a metal base mounted on a Bakelite stand. The lower portion of the stand is missing. The cup is much stained.This is a gold-coloured metal cup with two side handles and a long thin stem on a metal base mounted on a Bakelite stand. The lower portion of the stand is missing. The cup is much stained.braemar grammar school, warrnambool, dr brauer, warrnambool

Middle Eastern dagger or letter opener. Australian personnel served in the middle east in both world wars. This object was likely brought home from Egypt or Palestine by a service member. Possibly a Janbiya, a dagger worn by arab men over the age of 14.WW1 Dagger with head of camel or horse's head in brown leather scabbard with metal tip and belt clip.Patterned leather and engraved metal with arabic inscription on bladedagger, arab, egypt, palestine, leather, horse, camel

Used by donor's father in Australia.Carpenter's/wood worker's plane - wooden hand grip & wooden knob; screw for adjusting metal blade, metal base plate.'STANLEY' embossed on metal front plate /'BAILEY', No. 4 1/2 on base plate.carpentry, stanley works, woodwork

Hand tillage implement for research on small holding plotsMintern No300A Seeder - Two long wooden handled pedestrian directed tillage implement with metal seed hopper attachment. Small cast metal spoked front wheel with chassis. Metal painted Red.Small Metal front wheel part no. K694. Tillage part no. K712, Seed Hopper part no. AP803, Attachment for seed hopper part no. 6539X Metal wheel cog driver fro seed hopper operation part no. K721mintern, hand plough, tillage, seeder

Before mechanisation, pills were rolled by hand using equipment such as this pill press. Powders ingredients were blended together to form a resin, rolled and laid across the width of the platform. The paddle was then used to push the "sausage" shape through the grooves, creating a small, consistently sized and shaped, pill. The pill was then allowed to dry for later sale. This pill press is of uncertain origins but is representative of the type of equipment used to create pills in the 19th Century. It has the capacity to make 24 pills at once, and markings on the metal plate indicate each pill would have been the equivalent of "5 grains" (approx 0.3 grams).Rectangular wooden platform with a metal (brass) plate divided into 24 (twenty-four) grooves with a catchment area. The wooden paddle has two handles, one on each end, with a matching metal plate and grooves, as well as metal (brass) guide bars to help the paddle align with the platform.Handwritten on base of platform in black ink over white background: C11087 Handwritten on inside of guide bar on paddle in black ink over white background: C11087 Manufacturer's detail stamped into metal groove on platform: S. MAW SON / & / THOMPSON / LONDONpill press, pharmaceuticals, apothecary, pharmacy

Lionel Younghusband NX115868, refer Cat No 2491P for service details.Plague, made of black painted timber with silver coloured metal scroll on top & rectangular plate on bottom. In the centre is a round dome bearing a raised badge in silver coloured metal, surmounted by blue enamel map of Australia. On bottom of badge is a plain banner with blue enamel.On metal scroll: “We Honour You” On shield: “For Service 1936-45” On blue metal: “Tullamore” On name plate: “In Memory of TPR L G Younghusband”civic mementoes - plaques, military history

Sir Frederick William Hewitt (1857-1916) wrote one of the earliest comprehensive textbooks on anaesthesia, and designed several pieces of anaesthetic equipment. In 1901, he described his wide-bore ether inhaler, a modification of the Clover Ether Inhaler. Unlike the Clover, it can be refilled with ether while still in use, and the mask is screwed into place so that it "cannot be unexpectedly detached." This version is a modified Hewitt's Inhaler which has a narrower 'ways' than the original Hewitt's, and no water compartment. Additionally, one side of the bowl is made of glass which enabled the person administering anaesthesia to see the level remaining in the bowl. Bowl shaped inhaler with a glass bowl base and metal dome top with a connector which appears to be for a rebreather bag. There is a metal switch at the base of the glass bowl to alter or regulate the flow.Stamped into central tube: COXETER LONDON Stamped into side of metal dome: 6460hewitt, wide-bore, clover, ether, anaesthesia, anesthesiology, anaesthesiology

Officer's stable boot worn by Brigadier Geoffrey Austin Street MC who served in WWI at Gallipoli and on the Western Front. Following the war he was placed on the Reserve of Officers. He returned to military service in 1931 as Squadron Commander in the 4th Light Horse. He was promoted to the command of the regiment after l8 months' service, and finally to the command of the Third Cavalry Brigade which included the 8th Light Horse Regiment. Brigadier Street had entered Federal Parliament in 1934 and in November 1938 was seconded from military duties to serve as Minister for Defence in the Lyons Government . He was serving in this capacity in the Menzies government when he was killed in an air crash near Canberra on 13 August 1940.Representative example of officer's stable boots from the 'between the wars' period. Well preserved example of the boot makers art, complete and in good condition. Owned by well known Australian soldier and politician tragically killed at commencement of Second World War.Leather and canvas boots with leather boot and canvas upper calf legging. Leather strap at instep and leather stiffened back seam to canvas section; Leather edging at top of canvas upper legging together with adjustable strap. Foot of boot is stabilised by a metal 'Dasco' insert. On metal heal protector "704603"boot, street geoffrey a brigadier

From the home of Mrs. Nell Sebire. Second wife of Thomas.Double globular bulged glass soda siphon covered in metal netting and inscribed metal (silver plated) tap dispenser on top. "Veritable Seltzogene D. Fevre Paris Marque Depster S" inscribed around metal piece.bottles, containers, carbonated water

This hand held, mechanical date stamp, made in mid-20th century by English Numbering Machines Ltd (ENM) in Enfield, England and is part of the stationary items once used by Dr. W.R. Angus in his medical service. ENM was a well know manufacturer of mechanical counters and hand numbering machines, both printing and non-printing, for the stationery industry, offices, sales control and the legal profession. The company was amongst the exhibitors at the Birmingham section of the British Industries Fair, (stand number D 539). This Fair operated annually from the 1920 – 1960 and was attended by royalty and dignitaries as well as the general public. At its peak there were over 1000 exhibitors. This date stamp was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served with the Australian Department of Defence as a Surgeon Captain during WWII 1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Metal date stamp with Bakelite handle, made in Britain by English Numbering Machines. Model No. 4531; part of the W.R. Angus Collection. Stamped on metal: “ENM / British made / Model 4531” flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, date stamp, office stationery, mechanical date stamp, enm date stamp, english numbering machines, enm model 4531

Breakwater navigation lights are placed at the end of the breakwaters to warn incoming vessels of the end of the structure, as a marine safety measure. The subject item was such a light believed to have been placed at the end of Warrnambool's breakwater around 1915 when it was extended. The light had remained in place for many years until it was probably removed when the structure was undergoing rock armouring repairs to the end of the breakwater in 1975. The light had been placed in a council storage shed probably from the time when the structure was undergoing these repairs in 1975. In 2014 the light was removed from the storage shed and donated to Flagstaff Hill museum. History: Warrnambool breakwater plans were drawn up by 1874 and approval was given for preliminary construction work to start but when the money ran out, the works stopped. With a number of quick changes of government the “Warrnambool” breakwater project was kicked from one Victorian state government to another. Then finally in 1879, the eminent British harbour engineer Sir John Coode was asked to design a breakwater. His first design was for a 1800 feet long structure but that was scaled back to 900 feet and construction finally began in 1884. This structure was attributed in causing major siltation of Lady bay, as a consequence the breakwater was again extended in 1915. In 1975, the rock armouring at the end of the breakwater was added but by 1979 another impact study was calling for the breakwater to be removed altogether. The Heritage Council Victoria, regard the Warrnambool breakwater is of historical significance to the state as one of the most important maritime engineering projects that was undertaken in Victoria during the late nineteenth century. The light is also as part of this structure regarded as a significant item of historical interest.Marker light or navigation light. Round light stand with conical top piece (2 separate pieces). Metal base painted red, clear glass middle section enclosed by metal frame, metal cone shaped top section painted silver. Electrical wiring can be seen inside centre section. Pole that light would have been on to elevate it is missing.Has metal plate screwed onto side of base engraved "23". flagstaff hill, warrnambool, shipreck coast, flagstaff hill maritime museum, maritime museum, great ocean road, warrnambool breakwater, marker light, naviagtion light, breakwater navigation light

Recognising that warmed ether was less irritating to the airway and patients receiving it were less likely to experience shock, Francis Shipway developed the Shipway's apparatus which was used during World War 1 and continued to be used through to World War 2. Reduction of shock for patients who had experienced trauma was crucial to their later recovery, particularly during war times. This example of the Shipway's apparatus also has the facility for administering chloroform.A triangular metal stand with two glass jars sitting in a metal tub and a green metal jar that looks like a thermos, also sitting in a metal tub. A metal pole has been screwed into the centre point of the stand, with a circular top to act as a handle. One of the jars has a rubber stopper in the neck with metal tubing attached to the stopper. The other glass jar has a metal screw top with a dropper spout. The two glass jars are connected via red rubber tubing. The apparatus has been sectioned in parts to show the inner mechanisms.Typed in black ink on white paper and adhered to metal bath: SHIPWAY'S APPARATUS •Typed in black ink on white paper and adhered to metal bath: ETHER VAPORISER •Typed in black ink on white paper and adhered to metal bath: THERMOS WITH HOT WATER •Typed in black ink on white paper and adhered to glass bottle: CHLOROFORM VAPORIZER •Typed in black ink on white paper and adhered to metal connector: TO AIR BELLOWS •Typed in black ink on white paper and adhered to tube in thermos: DELIVERY TUBE •Moulded into base of thermos: THERMOSshipway, world war i, warmed ether, endotracheal, chloroform

Informal 12 hole golf event, played on Grand Final weekend. This event was started by a group of friends when there were few official golf tournaments played at Peterborough. The event was a stroke event with "mystery handicaps" ie you didn't know your handicap until you finished playing. The event was played on the Sunday of Grand Final weekend (except initially); Friday night traditionally was tea at Boggy Creek Pub and a Fishing Comp on Saturday. The name came about because three of the regular players, Ivan Voss, Bob Loader and R. McKendrick had a hut at the top of the dunes near Crofts Bay. They had a clinker boat on the beach as well. They subsequently built a house in Childers St. It ceased when the original participants were no longer able to play. The date of the first winner is 1980, last recorded winner is 1995. No longer played. further information required. Winners: 2nd August 1980 F. Virgona, 8th March 1981, R Case 25th September 1982, E Brierly 24th September 1983, R Mckendrick, 28th September 1984 D Stead, 28th September 1985 I Turnbull, 27th September 1986 J Charles, 26th September 1987 I Voss, 1988 no winner, 1989 F Carlin, 1990 B Turner, 1991 R Pollock, 1992 S McGuire 25th September 1993 B haskett 1st of october 1994 R pollock 30th of september 1995.Shortened golf driver and cracked ball mounted upon a wooden base with names engraved on metal surround.Engraved names, listed below, on metal plate affixed to the base.golf, peterborough golf club, golf tournment

These Rank Pips were presented to Dick Nankervis on his appointment as an Officer2 metal rank insignia pips diamond shaped Lieutenant with mounting pin holders on the reversemetal, pips, rank

This pointed chisel, made in Melbourne, was used in the making of components for the ship model Sovereign of the Seas. It is part of a collection of objects used by Jim Williams, maker of fine ship models from about 1930-1955. Most of the components for the models, as well as many of the tools, were handmade by Jim Williams. Jim’s family has donated the ship model “Sovereign of the Seas” and many tools, accessories and documents used in the making of this and other ship models have been donated to Flagstaff Hill Maritime Village. Ship model of HMS Sovereign of the Seas, scale model of 17th Century English war ship, was handmade and carved from plans, enclosed in airtight glass case. All components of that model, including even the smallest pulleys, were hand crafted using tools designed and made by Jim. Outstanding details include functional rigging and moving cannons. Please see our record 3732 of the mode Sovereign of the Seas for further details of the ship and the maker. This chisel is connected with the hobby and skill of ship model making that has been crafted as a leisure activity for many generations. The hobby is often chosen by serving and retired mariners who appreciate the connection with maritime history. This chisel was used by local Warrnambool man, Jim Williams, who was employed at Cramond and Dickson clothing store, and then at Fletcher Jones menswear for 27 years. It was used in making components for the model of the historic ship, the Sovereign of the Seas. The Sovereign of the Seas was a historic 17th century English war ship with important maritime heritage. Pointed chisel; dark round wood handle and metal shaft. Made in Melbourne. Chisel blade has an illegible inscription on it. This chisel is part of a collection of tools and accessories once used by Jim Williams, maker of a series of ship models 1930-1955 including “HMS Sovereign of the Seas”.Pressed into the metal "FRANK - - - / MELBOURNE"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, ship model sovereign of the seas, jim williams, james bernard williams, ship model hobby, ship model tools, ship model making equipment, ship model making accessories, wood working tool, pointed chisel, chisel made in melbourne, sovereign of the sea, ship model, hobby, ship model tool, tool, chisel

A large device for drying laundry consisting of two rollers between which the wet laundry is squeezed (or wrung); a mangle. American English uses the term 'Wringer' whereas UK English uses the term 'mangle'. Later devices were typically electrified.Large mechanical hand cranked household laundry mangle with hardwood rolls and metal fittings. Information about the equipment is stamped/incised on both the metal and wooden frame.Household Clothes Mangle /American Wringer No 120 / Inc Metal Bearings / / Hardwood Rollslaundry equipment, household mangle, wringer

The items include a wooden ruler, masonite and metal clipboard, metal stapler and desk calendar holder made of metal, date from the 1970s. Three clear glass ink bottles and a black Bakelite fountain pen with screw on top are a little earlier in date, and all appear to have a reliable provenance to the lightstation. They have second level significance as small items of office equipment used in the day-to-day running of the lightstation. Maintaining the lightstation – equipment (themes 2, 3, 5) This sub-collection of workplace objects under the main theme of ‘Running the Lightstation’, includes the equipment used for and maintaining the lightstation. All have second level contributory significance for the insights they provide into the types of appliances needed to keep the lightstation running and functioning as a navigation aid.Metal clipboard, wooden ruler, metal stapler metal calendar /date holder.

Part of the KEVIN JOHN HERDMAN, No. 397661 Collection. See cat No. 5942P for details of his service record.Set of cotton, elastic braces with brown leather button attachments for trousers. Stripes on elastic are black, brown, grey, orange and blue in colour. Metal slides for adjustment to "wearers" size.Stamped on metal adjustment slides; "POLICE AND FIREMEN".uniform, braces, kevin john herdman

Made by internees at camp 3, using wood sourced from under the barracks ie : stumps. Used for wood workingMetal chisel on a wooden handle, with a metal ferrule at each end of the handle. kazenwadel, blacksmith, wood, tools camp 3, metal, wood working

Belt for summer issue Polyester uniform trousers. Peter Ball collection, refer Cat No 4704Belt webbing light khaki colour, black metal buckle with sliding section for length adjustment, inside belt has large stamped military details some very faint plus name in texta.Military details, “........(arrow up) 1968 ........66-012-6304.40”. On metal buckle, “Lion metal goods” In texta, “Ball”belts, webbing, polyesters, uniform

.1) & .2) Utensils from 1 man 24 hr ration pack, comprising metal can opener one end & spoon the other end. .3) - .5) Utensil kit comprising knife, fork & spoon made of metal. .6) Clear cellophane packet containing scouring pads..3) - .5) Stamped into back of metal handle: "Grosvenor 1070"domestic items-cutlery, military equipment, passchendaele barracks trust, kfs

Portland Star Picture Theatre.Gold paint trim metal bottom, and brass.Front: Excelsior Underneath made in/United States of /America 28 Pa Cast into metal interior