This tuyere (word from French origin) was used by professional blacksmiths and or cattlemen before and during the Kiewa Hydro Electricity Scheme was being constructed. The need to use a furnace or forge in the shaping of metal rods, horse shoes and pipes is both a rural necessity and a construction, on site requirement. The "inventiveness" of cattlemen and construction workers to produce metal objects not available "off the shelf" is one of the inherent traits not only of rural self sufficiency but in the "pioneer" days of rural isolation one of survival.This tuyere is of great significance to the Kiewa Valley and its regions because it highlights one of the greatest strengths of the rural (especially isolated) life and its folk living there, and that is the great human factor of adaptability and survival techniques in sometimes harsh and demanding environmental circumstances. The inventiveness and the attitude, "she'll be right mate", demonstrates life on the land where specialised blacksmith activities can be found in non "professionals" because of the fact that "someone" has to do the job. This is one of the differences between country "rural" life and that found in cities and larger towns.This iron cone shaped tuyere has a small hole (diamenter 25mm) starting within an ever enlarging cone (amplification of the air pressure going through) delivering varying hot or extremely hot air into a furnace or hearth which intensifies the heat to allow the "shaping" of metal objects. The larger "flared" cone extension allows for the directed air to be spread and not concentrated.blacksmith tool, tue, bellows, fashioning metal, forge manufacturing process

A spokeshave was made with a wooden (usually beech wood) body and metal cutting blade. With industrialisation metal bodies displaced wood in mass-produced tools. The name 'spokeshave' reflects the early use of the tool by wheelwrights.Used by carpenters and/or cabinet makers and/or wheelwrights in the Kiewa Valley in the 1800s and 1900s. The tool consists of a blade fixed into the body of the tool, which has a handle for each hand. It is a shaping and smoothing tool eg. curves and rounding and used after cutting with chisels or saws. Ref. Pg 28 Tools for all Trades Cataloguewoodworking tool, spokeshave tool

Very old vice. The clamp is 50 to 60 years old when they were made by Technical School students in metal work class.Used by carpenters, woodworkers, furniture makers, welders, construction and metal workers in the Kiewa ValleyMathieson's Hand Vice, the smallest at 3 inches. Ref. Page 74 Tools for all Trades Catalogue. Small steel vice consisting of two parallel jaws for holding a workpiece. One jaw is fixed and the other movable by a screw. The clamp is used for holding a workpiece during hand operations eg. filing, hammering or sawing. Small steel clamp is a versatile tool that serves to temporarily hold work securely in place by screwing each jaw together.vice/vise tool, clamp tool, hand tools

Used by residents of the Kiewa Valley.Two different sizes - 1. half inch diameter and 2. 5 eighths inch diameter. Steel taper tap creates a thread inside a nut. Screw it into a nut, it takes the metal out and leaves a thread. tapered thread tap tool, tool

A bucksaw is a hand powered frame saw similar to bow saw and generally used with a sawbuck to cut logs or firewood to length (bucking).Used by residents of the Kiewa Valley for clearing land, chopping firewood, cutting lumber. Also used while camping because it is portableFormerly UKV 239. Buck Saw with Lightning Tooth Blade. Operated by two men.Ref. Page 10 Tools for all Trade Catalogue. It consists of 3 horizontal bars, the top one being twisted wire and the bottom one being the metal blade with a wood bar in between. They are attached at each end to curved wooden bars. tool for wood, saw, buck saw

A reamer is a type of rotary cutting tool used in metalworking. Precision reamers are designed to enlarge the size of a previously formed hole by a small amount but with a high degree of accuracy to leave smooth sides. Very oldUsed by metal workers in the Kiewa ValleyThis reamer is made of steel and is not tapered. It has a handle end and a serrated end. It has a three quarter inch diameter. reamer, metalworking tool

A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces. The iron was heated over a fire or in a charcoal brazier. Soldering irons were primarily used by tinsmiths and coppersmiths to work with thin sheet metal. These hand soldering irons have been replaced by electric ones.Used by coppersmiths and tinsmiths and workers in the Kiewa Valley.The soldering irons have a wooden handle, an iron rod and are made of copper at the pointy end (the bit).shaped like a pyramid.soldering iron, hand tool, coppersmith, tinsmith

Used to sharpen and polish straight edged razors or knives or chisels.Used by a resident of the Kiewa Valley possibly on the farm, in the kitchen or at the barber's shop.A flexible double - layered leather strop. This is a hanging strop which has two hooks which enable the top to swivel so that it can be turned over while hanging from a hook or peg. It has a metal ring with two hooks at one end and a padded stitched handle at the other forming a knob.A gold circle design at one end. At the other "The / Keen Edge / Strop"leather strop, razor tool

This blacksmith's hammer was an integral tool used by cattle property "blacksmith's" for the maintenance of horse shoes and the manufacture/alterations and repair of any other metal item required by the property. Self sufficiency was the key element to the success of a cattle property especially in semi isolated rural areas(early Kiewa Valley) and the larger the property ie. stock holding the greater the need..This blacksmith's hammer would not only have been used on the cattle property of the pioneer family (the Ropers) in the earlier part of the 1900s but also up in the Bogong High Plains grazing region to maintain the constant refurbishment/maintenance of horse shoes and other metal items. Depending on each property's requirement for blacksmith's service, one from the larger property could have serviced all the valley's requirements.Large blacksmith's hammer has a handle of twisted iron encircling 19 cm. hammer head. It has a round striking end and a wedge shaped punch end.V.B. [in dots ]tools, horses, punch, blacksmiths

This item wasused before diesel, electric and battery drilling apparatus were used by farmers, and other trades requiring a portable yet reliable method of drilling holes. As this item is a 3/4 inch hole drill it would be suitable for fencing and providing holes for structural studs. As with all outdoor farm equipment, man power was required (be it the farmer or farm hands). Fitness of the operator was at a high standard but protective gloves were not highly thought of as it was before occupational, health and safety regulations became mandatory over all manual handling activities, be they on rural properties or town/city factories. This period was one where the male ego was at its pinnacle i.e. the harder the tasks the more of a man was required. Hard manual work was not only the "way to go" but also a necessity. Evolution of cheap portable electric/battery powered tools opened up a more efficient method available, especially to those with less muscle strength. This item personifies the rugged environment of the rural workplace. The Kiewa Valley with its main emphasis on farming and grazing provided ample opportunity to use this construction implement. The manufacturer being a Scottish tool company is very significant in the era when this hole maker was in high demand. British steel products were of high grade and had a good record of reliability. The reliability of any tool was a solid factor for farmers and tradesmen in this semi-isolated region (Circa early 1900s) within the Kiewa Valley and its regional area. This factor,although not as crucial, post 1960s, when Asian manufacturers entered the market place and produced cheaper tools and transportation and supplies was more frequent and reliable, the need for the more expensive British made tools diminished considerably. After the influx of tradesmen from war torn Europe (post 1945) and the increased availability of tradesmen in the Kiewa Valley and its region the price of tools was and still is not as crucial and the cost of all required tools has become a minimal part of the equation. It is only with the emerging younger trades person, farmer and grazier, who have more, "one eye on production costs" and no "old ties to the motherland" inert mind set that quality tools such as this auger and other hand tools "must be made to last a life time" is no longer part of the modern work environment.This cast iron, hand operated Auger has a short barrel shaped cylinder at one end (known as the "Eye") and at the other end a Helical screw blade (screws the cutting edge into wooden material, thereby creating a hole 3/4 inch diameter in the wood) . The barrel section at the top permits a metal or wooden leverage plank to be inserted. The main rod has a 180mm long cutting/screw blade running from the bottom up towards the "eye" end. From the end of the screw blade to the handle is 380mm and cylindrical, but this changes at 550mm from the "eye" end to a 14mm x 10mm rectangular shape shaft.This shaft end is welded to the "Eye".On the shaft below the "eye" is stamped " MATHESON GLASGOW" on the front side and a spade (cards) symbol on the back.auger, hand drill, fencing, tool, rural trades, brace & bit

This is the stamp used by Ernest Phillips to mark his tools and his products. It was used both on wood and metal surfaces. Ernest Brighton Phillips (1875-1924) was born in Warrnambool and was apprenticed as a cabinet maker at the Warrnambool Box Works. By the 1890s he had established a furniture shop at the corner of Liebig and Koroit Streets and by the beginning of the 20th century he had the largest furniture warehouse and factory in Victoria outside of Melbourne. His products were sold all over Australia. He and his family lived at ‘Heatherlie’ in Koroit Street and today this site is occupied by the flats complex for senior citizens called ‘Heatherlie’. This stamp is of interest because it belonged to Ernest Phillips, a prominent Warrnambool businessman (late 1800s to the early 1900s.) It is also of interest as an example of an early name stamp. This is a small piece of metal with a rounded flange top and a wider flattened end. The end is serrated and cut to hold the letters, ‘E. Phillips’. Some white paint has been splashed on the end section.‘E.Phillips’ (letters reversed for stamping purposes)ernest phillips, history of warrnambool

This chisel belonged to Ernest Brighton Phillips, a Warrnambool furniture maker. Ernest Phillips (1875-1924) was born in Warrnambool and was apprenticed as a cabinet maker at the Warrnambool Box Works. In the 1890s he established a furniture store at the corner of Liebig and Koroit Streets and by the 20th century he had the largest furniture warehouse and factory in Victoria outside Melbourne. His products were sold all over Australia. Ernest Phillips and his family lived at ‘Heatherlie’ in Koroit Street. Today this property is the site of the residential complex for senior citizens known as ‘Heatherlie’. This chisel is of interest as it belonged to Ernest Phillips, a prominent businessman in Warrnambool at the end of the 19th century and the beginning of the 20th century. The item is also of interest as it is a good example of a woodworking tool that was used 100 years ago. This is a chisel with a wooden handle and a metal blade flattened at the end and attached to the handle by a brass ring. The blade is rusty and the handle has some of the wood gouged out at the top end. The handle has splotches of paint on it. The name of the owner, E. Phillips, is stamped into the wood. ‘E. Phillips’ernest phillips, history of warrnambool, warrnambool

This tool belonged to Ernest Brighton Phillips, a Warrnambool furniture maker. Ernest Phillips (1875-1924) was born in Warrnambool and learnt his carpentry trade at the Warrnambool Box Works. In the late 1890s Phillips established a furniture store at the corner of Liebig and Koroit streets and by the early 20th century he had the largest furniture warehouse and factory in Victoria outside of Melbourne. His products were sold all over Australia. Phillips and his family lived at ‘Heatherlie’ in Koroit Street. Today this property is the site of the residential complex for senior citizens known as ‘Heatherlie’. This tool is of considerable interest as it belonged to Ernest Phillips, a prominent businessman in Warrnambool at the end of the 19th century and the beginning of the 20th century. It is also of interest as a good example of a tool that was in use 100 years ago. This is a small tool with a wooden handle. The top part of the handle that screws in is missing. The tool is attached to the handle by a brass ring and a screw and the tool itself is a thin nail-like piece of metal with a small metal piece at the end in the shape of a star with six points. This end piece gouges out a hole or a pattern in wood or other hard material. The tool belonged to Ernest Phillips and his name is stamped on the handle. Three oblong-shaped metal nails were also with this tool but were not necessarily used with it. ‘E. Phillips’ernest phillips, history of warrnambool

These hand saws belonged to Ernest Brighton Phillips (1875-1924). Born in Warrnambool, Ernest Phillips took up an apprenticeship in cabinet making at the Box Works in Warrnambool. By the late 1890s he had a furniture store and factory at the corner of Liebig and Koroit Streets. By the early 20th century Phillips had the largest furniture warehouse and factory in Victoria outside Melbourne. His products were sold all over Australia. Phillips and his family lived at ‘Heatherlie’ in Koroit Street. Today the site of the Phillips’ home contains flats for senior citizens in a complex known as ‘Heatherlie’. These tools are of interest as they belonged to Ernest Phillips, a prominent businessman in Warrnambool at the end of the 19th and the beginning of the 20th centuries. They are also examples of the type of tools used 100 years ago. These are two hand saws which belonged to Ernest Phillips of Warrnambool. They have a rounded wooden handle inserted via a metal plug into the end of a piece of wood which is slightly curved. Attached to the metal plug is a thin steel blade with a serrated edge. The blade is approximately the same size as the piece of wood. The blades are somewhat rusted.‘J. Marples & Sons, Sheffield’.ernest phillips, history of warrnambool

Spoke shaves were used by woodmakers to shape curved surfaces (originally wheel spokes). These two spoke shaves belonged to Ernest Phillips of Warrnambool who would have used them to shape the surfaces of chair and table legs etc. Ernest Brighton Phillips (1875-1924) was the son of Henry Phillips (a hay and corn dealer in Warrnambool) and his wife, Emma. He learned cabinet making at the Box Works in Warrnambool and in the late 19th century established a furniture-making and selling business at the corner of Liebig and Koroit Streets. By the early 20th century he had the largest furniture warehouse and factory in Victoria outside Melbourne and sold his products all over Australia. He and his family lived at ‘Heatherlie’ in Koroit Street and after his death this Phillips house was acquired by the Methodist Church and the Heatherlie Homes for retired people were built on this site.These tools are of considerable significance as they were used by Ernest Phillips, a prominent businessman in Warrnambool during the late 19th and early 20th centuries. These are two spoke shaves - small planes, slightly curved, with wooden handles and a metal blade in the middle. The blade is attached to the handles via metal ends which go through holes in the wood. The blade area is strengthened with metal plates attached by metal screws. The metal parts are well-rusted and the handles are somewhat worn. ‘E. Phillips’ etched into wood on each spoke shave.ernest phillips, history of warrnambool

These handsaws belonged to a Warrnambool furniture maker and dealer, Ernest Brighton Phillips (1875-1924). He learned cabinet making at the Warrnambool Box Works and established a furniture warehouse at the corner of Liebig and Koroit Streets in the late 1890s. By the early 20th century he had the largest furniture warehouse and factory in Victoria outside Melbourne and his furniture was sold all over Australia. He and his family lived at ‘Heatherlie’ in Koroit Street and today the site of this family home houses the retirement village complex known as ‘Heatherlie’. The makers of these saws was Robert Sorby of the Kangaroo Works in Sheffield, England. This business was established in 1928 and is one of the world’s premier manufacturers of specialist woodworking tools. These two tools are of some significance as they belonged to Ernest Phillips, a prominent businessman in Warrnambool at the end of the 19th and the beginning of the 20th centuries. These are also a good example of the type of tools used in the woodworking trade 100 years ago. These are two handsaws which belonged to Ernest Phillips. They have wooden handles attached to the blade by metal screws. One screw is missing on the larger saw. The blades are made of steel with serrated edges and they are inserted into a fold of steel along the top edge. The handles are well-worn and the blades are a little rusty. ‘Robt. Sorby Sheffield Cast Steel’ ‘E. Phillips’ ernest phillips, robert sorby, history of warrnambool

These hand planes belonged to Ernest Brighton Phillips (1875-1924). Born in Warrnambool, Ernest Phillips learned cabinet-making at the Warrnambool Box Works. In the late 1890s he established his own furniture store at the corner of Liebig and Koroit Streets. By the early 20th century Phillips had the largest furniture warehouse and factory in Victoria outside of Melbourne. He sold his products all over Australia. He and his family lived at ‘Heatherlie’ in Koroit Street and the site of this home is now the complex of flats for senior citizens known as ‘Heatherlie’. These tools are of considerable interest as they belonged to Ernest Phillips, a prominent Warrnambool businessman in the late 19th and early 20th centuries. They are also a good example of the tools that were used 100 years ago. These are eight woodworking tools (hand planes) which belonged to Ernest Phillips of Warrnambool. They are rectangular pieces of smooth wood, some with an extra piece of wood at the lower edge and they all have a metal blade inserted through the wood at an angle. The blade protrudes at the base of the wood and when moved by hand along a surface it shapes the piece of wood being worked on by flattening and smoothing the rough surface and reducing the thickness. These planes have been well-used.‘E. Phillips’ernest phillips, history of warrnambool, warrnambool

Initial court cases for the Western district were held and controlled for some time by Rutledge in Port Fairy. The first courthouse was built around 1854 and was in service until the stone building was built next to it in 1870. These two implements were used until around 1970 when heating was installed in the courthouse. They were decommissioned by Mr Ellis Roberts, Public Works Department Inspector.These implements have a strong connection to a public building which has a long association with the town and surrounding area. The courthouse of 1863 was the scene of an infamous murder of Constable O’Boyle in front of the fireplace. Shovel has barley sugar twisted handle with eight sided domed top. It is flared at the bottom to hold the spade which is attached with two metal rivets. Spade contains a number of holes cut into oval shape in centre and has fluted side edges. The tongs consist of two parts held together below a short handle with a metal rivet and two metal discs. Both pieces have decorative mouldings on the handles and remnants of black paint. warrnambool courthouse, fire tongs, fire shovel, fire spade, warrnambool

this pocket knife is imoportant because it was used by AB Bloggs (Navy Medal) to splice lines on the HMAS Vampire. Donated by daughter Louise. AB Bloggs died from wounds received during sea battle in April 1942 in the South Pacific. He was awarded the Navy Medal for bravery.This item is significant because it is a remaining item of an award winning navy man who gave his life for his country.metal pocket knife: ( multitool - knife, bottle opener,screwdriver, and skewer), in black leather embossed case with belt loop and press close stud and plaited carry cord on pocket knife handle."U S"embossed, knife, leather, metal, south, pocket knife, pacific, multi tool, bottle opener, screwdriver, skewer, belt loop, louise

This case and its contents are believed to have been owned and used by a jockey who rode in the Orbost area. It contained a set of stirrups, two sets of spurs, and two leather jockey leggings.Horse racing as a sport and recreational activity were once part of Orbost's history.A brown leather case, rectangular in shape, a leather handle, with a metal plate on the lid, and leather loops through which straps could be threaded to surround the case. The leather has been tooled with a "crocodile" pattern.leather-case jockey's- case horse-racing

Used in the farming industry around Orbost to cut silage or hay. Used to cut compacted hay or silage prior to the baling of hay or silage, until the late 1940s.A typical tool from the Orbost farming industry pre 1950.A large coarsely serrated flat metal blade set with two wooden handles.silage-knife agricultural-implemement

Used at Orbost & District Hospital, c. mid 20th century.This item is associated with Orbost Hospital and is an example of an early medical tool.A pair of metal tweezers, silver colour, with small teeth at the pointed ends and with grip pads located in the centre of each arm. Possibly stainless steel.Allen & Hanbury'smedical-instrument tweezers

Used at Orbost & District Hospital c. mid 20th century for urinary problems.This item is associated with Orbost Hospital and is an example of an early medical tool.A long metal catheter with a curved end, made of metal, possibly stainless steel. It has a small eyelet hole near the curved end. Inside is a fine metal tube. It has a red tag ORBOST. medical-instrument catheter

A rasp with a flat metal plate with a rough edge. It has a raised metal arm with a carved wooden handle.rasp tool