Showing 518 items
matching winding
-
Melbourne Tram Museum
Photograph - Black and White - Nicholson & Gertrude Street Engine House interior
Shows the interior of the cable tram engine house that was located on the corner of Gertrude Street and Nicholson Street in Fitzroy. Shows the steam pipes to two of the engine cylinders, the control equipment, and large cable winding wheels. An MMTB poster titled Melbourne Tramways Past and President (see Reg Item 6368), captions the photo as "Nicholson Sreet Power House - the last to operate" The facility ceased operation in 1940 though the equipment was retained until 1941. Yields information about the interior of the Gertrude Street or Nicholson Street cable tram engine houseBlack and white photograph - interior of the Engine house on the corner of Gertrude and Nicholson Streets prior to closure in 1940.tramways, trams, coburg, cable cars, engine house, nicholson street, gertrude street, steam engines -
Warrnambool and District Historical Society Inc.
Watch, Travelling Watch Case, Early 20th century
There is no specific information available on this watch and case. The watch was made by the American Watch Company which operated from 1850 to 1957. Small cases were often used to carry a watch in the 19th and early 20th century while a person was travelling, although wooden ones do not seem to have been common. The owner of watch, ‘A.U.’ has not been identified. Until the provenance of this item is established it remains an interesting object from the past and one suitable for display. This is a wooden case embossed on the front with a flower motif. It has a hinged lid with a space hollowed out inside to hold a pocket watch. This area has been lined with felt. The case contains an American silver watch which has a highly decorated cover. The watch face has Roman numerals with a smaller seconds dial. There is a winding mechanism and a ring at the top of the watch for attachment to a chain.On silver watch case: ‘A.U.’ On watch face: A. W. Co., Waltham, Mass. travelling case and watch, american watch company, warrnambool -
Kiewa Valley Historical Society
Fire Hose Reel, c1950s
The fire hose reel was purchased by the Fire Ladies' Auxiliary for the Mt Beauty S.E.C. Fire Brigade in the late 1950's for over 1000 pounds. Initially they competed with Bogong fire brigade as both were 'Industry' Fire brigades - both owned by the State Electricity Commission. Competition was at 2 levels - north east Victoria and state competitions involving rural and urban brigades with a difference in the equipment. Mt Beauty was/is an urban brigade whereas Tawonga is a rural brigade. Competition involved members to improve their skill, keep fit and was a very social occasion. After the Shire took over Mt Beauty township in 1961, the Fire Brigade ran by itself but soon became affiliated with the C.F.A. because of insurance and legal liability e.g.. enabling them to stop traffic or wreck buildings if required. The CFA were not happy with the Mt Beauty truck so a new one was obtained while the old one went to Bogong. Competitions gradually ceased as it was a young man's sport and young members had prior commitments. The reel was donated to the KVHS in the mid 1980's as it failed to be sold as it competed with new, cheaper, aluminium reels. The practice strip was located beside the fire station in Lakeside Avenue. This fire hose reel was used by the Mt Beauty Fire Brigade for demonstrations at competitions during the 1950's and 1960's. The Mt Beauty Fire Brigade Team won the competition in 1966 at Wangaratta. The score was close against the home team and was decided on a play off. The team benefitted by the man who wound the hose on allowing it to end up at the easiest height to handle when full of water and very heavy.The Mt Beauty Fire Brigade was an 'industry' fire brigade belonging to the State Electricity Commission of Victoria from the 1940's. It became a member of the Country Fire Authority in the early 1960's. During the 1950's and early 1960's members would compete with other local fire brigades in competitions against other brigades in the north east of Victoria using skills such as unwinding the hose off the reel and turning on the water in record time. The Mt Beauty Fire Brigade continues today as an urban fire brigade affiliated with the CFA.Varnished wooden cart reinforced by painted red steel frame. The wheels have 14 wooden spokes and steel around the outside of the wooden wheel. A long canvas hose is wound around a central winding cylinder. The cart has a wooden handle with a rubber jockey wheel at its end. There is a brass hose nozzle attached by a stainless steel frame on the outer side near one of the wheels.Each Reel: "Mt Beauty F.B." yellow print outlined in black with red background.fire hose. mt beauty fire brigade. country fire authority. fire reel. -
Lorne Historical Society
Tool - Cirkut Panoramic Camera Number 5, Circa 1915
This camera was designed by William Johnston in 1904. Production began in 1905. There were many versions, the number indicated the length of film which corresponds to the width of the panorama. Originally designed for photography of large groups of people. Later it was used for landscapes. This camera was used by the local Lorne photographer William Anderson who took photographs of visitors and local scenes. William purchased Norman Brown’s photographic business in December 1899 and worked in Lorne until his death in 1948It is a large format rotating panoramic camera. A concertinaed fine leather tube with the adjustable lens is contained in a black wooden leatherette covered rectangular box. On the top is a metal winding handle, a series of weights and a carrying handle. The lens is a Gundlach - Manhattan rapid recto graph. The camera rotates on a geared tripod through 360 degrees with the film driven past the exposure slot by a clock work motor.cameras, lorne, william anderson, -
Bendigo Historical Society Inc.
Document - MINING REPORTS - EXTRACTS ON EPSOM & HUNTLY LEADS, POTTERY FLAT
Brief handwritten extracts on the Epsom & Huntly Leads, pottery Flat copied from Dickers Mining Records Feb. 1862 Pages 2 & 3. Notes mention total number of Crushing Machines employed, three winding engines and the number employed at these 13 crushing machines - 95 men, 12 boys and 35 horses. Also the weekly crushing and the average yield per load.document, gold, mining reports, mining reports, extracts on epsom & huntly leads pottery flat, dickers mining record feb. 1862 pages 2 & 3 -
Bendigo Historical Society Inc.
Document - DEBORAH MINE - NOTES ON THE DEBORAH MINE
One hand written notes, one typed and three carbon copies of notes on the Deborah Mine. Notes include depth of shaft, locality, plant, engine house, winding engine, boilers, crushing battery, earlier plant, prominence, best gold, gold yield and dividends. References: Mines Dept. Booklet Bendigo Goldfield 1936, Mines Dept. Quarterly and Annual Reports and A. Richardson.mine, gold, deborah mine, deborah mine, notes on the deborah mine, mines dept. booklet bendigo goldfield 1936, mines dept quarterly and annual reports, a. richardson -
Bendigo Historical Society Inc.
Document - NEW CHUM & VICTORIA LINES OF REEF - NEW CHUM & VICTORIA MINE MANAGER'S REPORTS
Handwritten copies of four Mine Manager's reports for the New Chum & Victoria dated 13/12/1879, Manager Wm H Grainger, 13/3/1884, Manager W. H. G., 15/3/1886, and 21 /6/1886. Reports mention equipment, costs, and a new Winding Plant where they hauled water before allowing the men to descend. Notes on testing boilers.document, gold, new chum & victoria lines of reef, new chum & victoria lines of reef, new chum & victoria mine manager's reports, wm h grainger -
Bendigo Historical Society Inc.
Domestic Object - GERTRUDE PERRY COLLECTION: MANTLE CLOCK, 1941
Object. Mantle Clock. 1940's 8 day time and strike clock. Veneered case with chrome bezel, silvered hands and numerals. Cathedral gong, chimes once on 1/2 hour and number of hours. Complete with pendulum and key. Presentation plaque on front reads Presented to Miss Gertrude Perry, Mitchell St, Popular Girl 1941'. Modified key for easy winding.person, bendigo, mantle clock, gertrude perry collection, mantle clock, bendigo easter fair -
Lakes Entrance Regional Historical Society (operating as Lakes Entrance History Centre & Museum)
Photograph, 1930c
1 x copy black and white 15.5 x 11|1 copy sepia 14.5 x 10Black and white photograph of the tramway on which the granite rock was transported from the Mississippi Creek quarry to the head of the North Arm. It shows portion of the 3 foot 6 inch, 105cm, track, which had a gentle gradient, achieved with cuttings where necessary, winding between thick natural vegetation. Two women standing on track dressed in 1930 style clothing. Lakes Entrance Victoriatransport, quarries, room display -
Ballarat Tramway Museum
Magazine, Australian Railway Historical Society (ARHS), "ARHS Bulletin No. 441, July 1974", "The Cable Trams of Sydney and the Experiments leading to final electrification of the tramways", 1974
Magazine - 24 pages, printed on off white paper, centre stapled titled "ARHS Bulletin No. 441, July 1974", containing an article "The Cable Trams of Sydney and the Experiments leading to final electrification of the tramways" by R. F. Wylie. Looks at the both the North Sydney and Kings St cable lines, from which the body of ESCo tram operated on, the winding houses, route maps, depots. trams, tramways, arhs, sydney, cable trams, north sydney, king st -
Bendigo Historical Society Inc.
Document - MERLE HALL COLLECTION: SIX PAGED DOCUMENT ENTITLED ''THE END OF AN ERA''
Six-paged document entitled ''The End of an Era''. This document has no signed author (possibly Merle Hall) and no actual date. However, it relates to the winding-up of Arts Bendigo and it begins - Thirty on years ago, late in 1970, …Review of three decades of arts activity of the variously named The Australian Arts Council-Victorian Division - Bendigo Branch/Bendigo Arts Council/Arts Bendigo. -
Bendigo Historical Society Inc.
Sign - Code of Signals Sign
A uniform code of signals for working winches in mines was established in 1887. Signs displaying the signals had to be placed in clear view of the engine driver and at each level of the mine. The signals were various numbers of bells.A metal sign with a black background and red and white printing. There three sections, the top one is white text, Signals for Winding, numbered 1 to 10 and 15 down the sign, with instructions next to each number. The next section is red text, Firing Signals, with two lines numbers and writing. The third section is white text, Interplat Signals with signals to raise or lower cage to various levels.code of signals, underground minning -
Bendigo Historical Society Inc.
Postcard - POSTCARD. GREAT EXTENDERED HUSTLERS, 1865
Postcard. ROYAL HISTORICAL SOCIETY OF VICTORIA. Bendigo Branch Great Great Extended Hustlers. Locality. Hustlers Hill, Nth Bendigo Formed 1865 - Last production 1921 Depth of Shaft - 3470 feet Poppet Legs - Steel, 70 feet high Winding Engine: First motion 8ft. Drums. Golde Very Rich Total yield - 300,000 ozs. Dividends pounds 375,000 -
Wodonga & District Historical Society Inc
Domestic object - Small crystal mantel clock
This item is from a collection donated by descendants of John Francis Turner of Wodonga. Mr. Turner was born on 6 June 1885. He completed all of his schooling at Scotts Boarding School in Albury, New South Wales. On leaving school, he was employed at Dalgety’s, Albury as an auctioneer. In 1924 John was promoted to Manager of the Wodonga Branch of Dalgety’s. On 15/03/1900 he married Beatrice Neal (born 7/12/1887 and died 7/2/1953) from Collingwood, Victoria. They had 4 daughters – Francis (Nancy), Heather, Jessie and Mary. In 1920, the family moved From Albury to Wodonga, purchasing their family home “Locherbie” at 169 High Street, Wodonga. "Locherbie" still stands in Wodonga in 2022. The collection contains items used by the Turner family during their life in Wodonga. Crystal is a high-quality glass crafted with lead and the more intricate a piece's cuts and stems, the more value it holds for collectors. It became a popular serving option in Australia during the late 19th century and throughout the first half of the 20th century.This item comes from a collection used by a prominent citizen of Wodonga. It is representative of a style of crystal ware items of the early 20th century.A small mantel crystal clock. The central clock face has a plain silver metal surround. The winding mechanism and time adjustment dial and screws are at the back. The face of the clock indicates hours 1 to 12 in larger numbers with smaller numbers 13 to 24 in the relevant corresponding location around the face. Spacing for each minute is marked by a black line. The clock has no identifying marks.crystal ware, domestic items, crystal clocks -
Melbourne Tram Museum
Document - Photocopy, Truck and Bus Transportation, "Salute to the Cable Tram", Original July 1948
Photocopy of an article from the July 1948 issue of Truck and Bus Transportation titled "Salute to the Cable Tram", about the author's view on the closure of the cable tram, a child's view point, first services, photos by Wal Larsen, route details, winding down, take over, conversion and finally closure. Based on Reg Item 3908, would have been written by Frank Sheenen.trams, tramways, cable trams, tramcars, lights, depots, closure, melbourne -
Bendigo Historical Society Inc.
Document - G. ALICE JONES COLLECTION: LETTER HERCULES GOLD MINING COMPANY
Hercules Gold Mining Company was registered 1/9/1864 and operated on the Sheepshead line.Letter dated 1st August, 1950 from H.L. Stewart Manager of the Hercules Gold Mining Company to shareholders advising of the voluntary winding up of the company. On the back an handwritten note dated 28/08/1950 from the probate duties branch to the Estate Annie Elizabeth Jones stating that the amount of 53 pounds 14 shillings and 9 pences has been paid into the estate.mining, business, shareholders -
Bendigo Historical Society Inc.
Plan - MARKS COLLECTION: PLAN NEW BOILER LANSELL'S LITTLE 180 MINE
Plan drawn on buff coloured waxed paper. Written on bottom: 'No. 1 Arrangement New Boiler for Lansells Proprietary Little 180 Mine Bendigo. Scale 1/4 inch = 1 foot. Hargraves & Daggar, Consulting Engineers, Victoria Chambers Bendigo' Plan shows entry of tramway, fuel store, boiler room, stack ( 75ft ), driving platform, winding engine, view to shaft.mining, lansell's little 180 mine, george lansell, gold mining, bendigo -
Tarnagulla History Archive
Two sections of Flat Wire Rope used in Tarnagulla mines c.1886
David Gordon Collection. These are an interested relic from the 1880s when the Prince of Wales and Old Poverty Company converted their winding machinery from flat wire rope to round wire rope. The old rope of some hundreds of metres in length was simply dragged clear of the mine and discarded in the surrounding bushland. This style of rope succeeded the old Indian hemp flat rope, and was in turn superseded by the round wire rope. These segments are most instructive and quite rare relics. The smaller segment measures approximately 40 x 10cm. The longer segment measures approximately 96 by 10cm -
The Ed Muirhead Physics Museum
Ring Transformer
Cast, assembled. Varnished. Accessories: paper label in plastic sleeve screwed to top. Surface finish: varnished. Paper label affixed to top of object: “Ring Transformer E2/Core Details/Cast Iron Ring/Mean Diameter 15.45cm/Thickness (along radius) 2.0cm/Breadth ([parallel- signified by two vertical lines] to axis) 0.509 cm/Winding Details Primary/Secondary” Damaged label adhered to upper face in back left corner: “Part[illegible]” -
Kiewa Valley Historical Society
Calendar Desk Perpetual, circa mid 1950s
This item appears to be a calendar which was in use for a multiple clientele office e.g. post office, commercial office or bank, school or educational administration area, small government office or hospital administration in the Kiewa Valley or its region. The time this item was first used, electrical or battery powered desk and office calendars did not exist for semi isolated rural regions. These type of perpetual calendars not only looked impressive but were not affected by power shortages. This was a time when not all of Victoria was adequately supplied by power. This item is quite relevant to the Kiewa Valley as it demonstrates that the time before the Hydro electricity generators where built (Mount Beauty to Falls Creek), power supplies were not keeping up to the ever increasing demand from city and rural customers. This item was in a period before mass produced automated date and time pieces were available and hand operated date and time pieces were both in a social and commercial sphere a necessity.Wooden box (varnished) with three openings (on the front) detailing ,the day(Monday to Sunday), the date (1st to 31st) and the month (January to December). On the right side of the calendar box are two winding screws (RHS 6 steel) for each opening. These permit the scrolling of the information i.e. day, number and month. This ability results in a desk calendar which is perpetual. On the back there is a steel (screwed on) hanger with a slot for wall screw.perpetual calendar, office calendars, desk calendars, desk furniture -
Federation University Historical Collection
Book, Industrial Electricity
The book was published for the use of personnel of the army, navy, marine corps and coast guard. The book was used by Charles Bacon who studied at the University of Nevada in the late 1930s/early 1940s. Bacon worked at Bunker Hill Mines and Kellogg Idaho, before arriving in Australian in 1951. He worked for CN Myers, a company involved with paper converting. CN Myers was a family business (on Charles Bacon's maternal line).Blue soft covered book of 607 pages. Chapters include electrical Algebra, fundamentals of Electricity, Wiring, Magnetism, Armature Wiring, Generators, Motors, Controllers, Geometry and Trigonometry, Alternating Current, AC Circuits, Transformers, Polyphase Systems, Alternators, Induction Motors, Stator Winding, Multi-Speed Induction Motors, AC Controllers, electrical instruments, Electron Tubes, Welding Systems, Welding Systems, electrical Drawings. charles bacon, mining engineering, metallurgy, university of nevada, armed forces, world war 2 -
Bendigo Historical Society Inc.
Photograph - WATTLE GULLY GOLD MINE: CHEWTON
WATTLE GULLY MINE CHEWTON black and white photograph: poppet head, mine building at right constructed of corrugated iron. Poppet legs from ' Great Extended Hustlers Mine' via Stanfield Mine, Bendigo. Winding Engine ( now electric ) from Ironbark Mine, Bendigo. On back RHSV, Bendigo Branch. Handwritten in ball point pen ' Wattle Gully Mine/ Chewton' mng 33organization, business, wattle gully gold mine, chewton -
Bendigo Historical Society Inc.
Document - ALBERT RICHARDSON COLLECTION: NEW CHUM RAILWAY MINE, GOLDEN SQUARE
Three page typed document plus map. Document details location and history of the New Chum Railway Mine, Golden Square and includes: depth of shaft, size of lease, locality, poppet legs, winding engine, engine houses,crushing battery, best gold obtained, prominence, and total gold production and dividendds. References provided. Document forms part of research referred to in Albert Richardson's paper 2264.70.bendigo, mining, new chum railway gold mine -
Flagstaff Hill Maritime Museum and Village
Domestic object - Clock case, Late 19th to early 20th centuries
This vintage-era clock case has a curved top and two doors, one at the side, and the other at the top. It could have had another frame for the front with a window or fitted space for the clock mechanism. The doors may have given access for winding the clock with a key and to set the time or perhaps an alarm or chime. It is possible that the arched shape was the bottom of the clock case and not the top, in which case, there would be more space for a pendulum to swing. The wooden case would amplify the sound of the tick of the clock.The wooden clock case is connected to domestic life in the late 19th and early 20th centuries when households could afford at least one clock for their furnishings.Wooden clock case with open front and arched top, which may be the bottom of the case. It has a hinged door on the side and another door on the top with a small brass knob. This case is ready to be fitted with a clock mechanism.warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, clock case, clock case with two doors, pendulum clock case, vintage, horology, time keeping, clock maker, domestic clock, furnishing -
Stawell Historical Society Inc
Photograph, Panorama Of Stawell from Big Hill looking North West 1878 Mines Visible
On very left behind the winding engine shed in the foreground is the South Cross Mines No8 & No9. The next mine to the right not counting the Whims is the Crown Cross United Mine with curved tramway. Tyne Reefing Company is barely visible at centre of image in front of left end of settling dam. The Great Northern is centre right of image, Extended Cross Reef Mine, then Oriental Mine, the Grant Lamont Battery and two Pleasant Creek Cross Reef Poppet Heads.Scotchmans United Quarts Mining Company 1878Victorian Views. C. Herbert, Photo. Stawell 1878stawell mining -
Melbourne Tram Museum
Photograph - Black and White - cable tram alarm signalling device - set of three
Photograph shows the device used to send a "telegraph" signal to the winding or engine house. They were positioned along the track and enabled the tram crew or a cable tram worker to send a signal about the cable. The crew member would set the pointer and depress the trigger. This sent the signal which was recorded on a telegraph tape, indicating the signal and the location of an incident. Installed by the Melbourne Tramway and Omnibus Co. (MTOCo) This photograph is Public Records Office photo H165, 166 and 167 in the Victorian Railways collection.Yields information about the type of equipment the MTOCo used to operate the cable tram system.Set of three Photographs - Black and White of a Melbourne cable tram signalling device.trams, tramways, cable trams, mtoco, signalling, cables, engine houses -
Melbourne Tram Museum
Newspaper - Photocopy, The Age Newspaper, Roper rejects proposal to protect historic tram engine room, 28-11-1989
Provides a report from The Age, 28-11-1989 written by Ingrid Swendsen, about the rejection by the Planning and Environment Minister , Tom Roper to protect the former cable tram winding or Engine house on the corner of Bridge and Punt Roads Richmond, despite the recommendation of the Historic Buildings Council to add it to the register. The building was later demolished by the Roads Corporation to widen the intersection. The Tramways have a small sub-station on the site. Quotes Douglas Hill of the National Trust and Roz Hansen of the Historic Buildings Council. Provides a report on the rejection of a recommendation to protect a historic building.Photocopy of a newspaper clipping from The Age 28-11-1989 - Roper rejects proposal to protect historic tram engine roomtrams, tramways, cable trams, engine house, winding house, punt road, bridge road, demolition, richmond, historic buildings council -
Bendigo Historical Society Inc.
Document - VICTORIA HILL - RECOMMENDATIONS FOR VICTORIA HILL
BHS CollectionHandwritten notes on recommendations for cleaning up and signposting Victoria Hill. Also contains list of photos from the Bendigonian of 1899. List of photos: Shamrock Mine, Undershot Water Wheel at Diamond Hill for Phillips Crushing Battery. Mr Ballerstedt's Crushing Battery at Victoria Hill, Thompson's Foundry at Castlemaine, Machinery made for Bendigo Mines, Air Compressor at Shenandoah Mine, Winding Engine at Koch's Pioneer Mine, Poppet Legs at Koch's Pioneer Mine, Air Compressor at New Chum Railway Mine, Fortune Hustlers G M Co Bendigo View of Mine, Winding Plant and Afternoon Shift and Underground Work in the New Chum Railway. Also mentioned are notes on Machinery made by Thompsons. Also a carbon copy of Annual Report to Bendigo Branch Royal Historical Society, Victoria 1/7/71. Mentioned in the Report are: Historical Ball, The Central Deborah, Victoria Hill, Tours and Society Business. Albert Richardson document ?document, victoria hill, victoria hill, recommendations for victoria hill, north old chum, ballerstedt's rich 24 yard claim, floyds battery lansell's big 180, the bendigonian 26/1/1899, 2/2/1899, 20/4/1899, 11/5/1899, 10/8/1899, 14/9/1899, shamrock mine, undershot waterwheel at diamond hill, phillips crushing battery, mr ballerstedt's crushing battery, thompson's foundry, shenandoah mine, koch's pioneer mine, new chum railway mine, fortuna hustlers g m co bendigo, new chum railway, st mungo lady barkly, catherine reef, new moon, rae's open cut, old court house eaglehawk, police barracks, vic wodetzki, joss house, central deborah, central nell gwynne, mr harold curnow, bendigo branch royal historical society victoria, mrs kingerlee, felicity kingerlee, mr h biggs, city council, rotary club of bendigo south, white hills cemetry, chinese joss house, bendigo pottery, mr derham, reservoir high, princess theatre, a n a hall, mr hattam, col. sprenger, survey corps, a richardson -
Bendigo Historical Society Inc.
Photograph - HANRO COLLECTION: TWO LADIES AT SPINNING MACHINE
Black and white photograph of two ladies at spinning machine at Hanro factory. Boxes of cones wound behind them. Shelves to right also containing various sizes of spools of thread. Inscriptions: on back - 'On corner (TML) Winding room Hanro. Mrs Dorothy (Gooding) Arichald (sic). Mrs Moroni;, 'Bendigo Historical Society, 'Glad Davis'. "Bendigo Historical Society' (ballpoint pen). 'Glad Davis' TR corner.person, group, employees -
Bendigo Historical Society Inc.
Document - ALBERT RICHARDSON COLLECTION: A 1 COMPANY
One page document detailing the formation of the A1 Mining Company in 28.8.1918. Company formed by Melbourne investors. Capital of 50,000 pounds in 100,000 shares at 10/- each. Included the Clarence, New Moon and Suffolk on the Garden Gully line. A1 purchased the winding plant at the New Moon and the winch plant at the Clark and Neanger shafts. Clarence, North Argus, Suffolk and New Moon south and east shafts remain the property of the companies.bendigo, mining, a1 gold mine