Book produced by the Science Museum provides a brief history of the cable tram system, with photos. Includes details of the engine houses, the cable, the grip mechanism, the ticket bell punch, and why "Mind the Curve". Has a list of acknowledgments. Published shortly after or at the time of the launch of the tram in the enclosure in Russell St. The additional sheet with the book provides details for each route of route, the location of the city terminus, suburban terminus, running time, night light, route length, first and last car for each day of the week. Not known who compiled the sheet.Demonstrates the work of the Science Museum - now Scienceworks.Book - 16 pages + card cover +postcard of cable tram set No. 1 at the Science Museum 1975. Inside the book is a ruled sheet of paper with details of the cable tram routes, handmade with ink.tramways, cable trams, science museum, melbourne

.1 - Book - 4 pages, (brown paper) + card covers (brown printed matching brown on one side) - side stapled, titled "Cable Trams", published by the Science Museum of Victoria, Swanston St, at the time of the launch of the No. 1 cable tram set in the glazed display case 1/5/1975. Gives a description of cable tramways, a map, summary history, winding houses (power), the trams, cable, bell punches, grips, crews and "mind the curve". .2 - Program for the launch event and a list of speakers - Judge R. J. Leckie, F. R. Kirby, R. J Hamer and R. H. Fowler of the Museum. Also contains a pamphlet for the Science Museum of Victoria. Two copies held.trams, tramways, cable trams, science museum, displays

Ill, p.16.non-fictionAn introduction to the Melbourne cable tram systemtramways - melbourne, cable trams - melbourne

The series of photos show the transport of the cable tram set from the Science Museum to Preston Workshops where it was repainted before returning to the Museum. and displayed in a glass case in Russell St.Yields information about the movement of cable tram set from the Science Museum to Preston Workshops.Set of three photographs of cable tram set being moved from the Science Museum to Preston Workshops 1 - the grip car being lifted out of its shed at the Museum 2 - both vehicles loaded onto semi trailers - Lonsdale St at the corner with Russell St. 3 - the tram set in the lifting shop at Preston WorkshopsDetailed description on rear. K S Kings stamp with his photo numbers - 135-18, 20 and 27 tramways, cable trams, tram 1, science museum, preston workshops

Postcard - cable tram set No. 1, displayed in the glass case at Russell St at the then Science Museum of Victoria, c1980. Postcard by Leedon Printing, possibly for the Science Museum. Rear is a divided back with a caption, location of Leedon Printing, location for stamp and address and an image of the Science Museum and its address.trams, tramways, cable trams, science museum, mto co, displays, tram 1

Newspaper clipping, from The Sun 24/1/1974, titled "Its a long time between stops" about the proposed restoration of cable tram set No. 1 by the MMTB. Has a photo of the Director of the Science Museum Mr Richard Fowler in the grip car and the proposed work.trams, tramways, cable trams, science museum, restoration, tram 1

The Collection is held in the FedUni Science Museum (Mt Helen Y Building)Low resolution photographs of the historic Scott Egg Collection held by the Federation University Science Museum, along with a spreadsheet of holdings. Australia's native birds are protected. It is illegal to collect eggs or to interfere with birds' nests without a permit.birds, eggs, bird eggs, science, scott, charles a. scott

Photos show cable tram set No. 1 on display outside the Science Museum in Russell St Melbourne. The tram was on display from early 1974 until 1989 when it was moved to Box Hill for display. It is owned by Museums Victoria. Yields information about cable tram 1 and its display in Russell St.Colour prints - set of 2. trams, tramways, cable trams, science museum, tram 1, russell street

Photographs show the installation process and official unveiling of Cable Tram set No.1, the first cable tram set to operate in Melbourne from 1885. It marked the 90th anniversary since its appearance on the cable network. This set was preserved by Alf Twentyman for many decades.Yields information about the provenance of Melbourne's first cable tram Black and white prints with notes on the rear.On rear in ink or pencil: "Melbourne. Official unveiling of Cable Tram set No. 1 at the Science Museum 1/5/75, Thurs, 3.30pm, Russell St, Cnr Lt Lonsdale St, City" "Melbourne. Undergear being fitted to Cable Trailer No.1 at the Science Museum, before it joins Grip Car No.1 in the glass display case. Russell St, at Cnr Lt Lonsdale St, Melbourne. Not the temporary track. Sunday 20/4/75. (Stamp): K S Kings 140-10. Copyright reserved" "Melbourne. Cable Tram Grip Car No.1 is unloaded after overhaul at Preston W/S at the Science Museum, Russell St, at Cnr Lt Lonsdale St, City. Sunday 20/4/75. (Stamp): K S Kings 140-8. Copyright reserved" "Cable Car No.1 being moved into display case, Russell St, Melbourne, 9am Sunday 20 April 1975. (Stamp): Graeme S Breydon, 204 Carlisle St, Balaclava. 3183 B48-22" tramways, trams, cable trams, cable tram set no.1, science museum, russell st, alf twentyman

Newspaper clipping from The Age, Thursday January 24, 1974 titled "Clang clang goes the trolley right into a glass case", about the positioning of the Museum of Victoria (at the time the Science Museum) cable car - grip and trailer into a glass case on the corner of Russell and Little Lonsdale St. Has a photo of a Nicholson St cable car. Notes the MMTB repair work.trams, tramways, mmtb, cable trams, museums, exhibitions

FRAMED PHOTOGRAPHS OF MODEL OF PORT PHILLIP & CLUNES MINE AND SIGN USED WHEN ON DISPLAY .1 PHOTO OF FULL MODEL .2 PHOTO OF BACK OF MODEL .3 PHOTO OF CLOSE UP OF BUILDING WHICH HAS NO OUTER WALLS OR ROOF TO ENABLE VIEW OF INSIDE. .4 HAND WRITTEN SIGN, FRAMED MODEL MADE IN 1858 BY CARL NORDSTROM ON SITE . MODEL NOW IN STORAGE AT SCIENCE MUSEUM OF VICTORIAlocal history, photographs, mining

MODEL MADE BY CARL NORDSTROM ON THE PORT PHILLIP MINE SITE IN 1858. NOW ON DISPLAY AT THE SCIENCE MUSEUM IN MELBOURNE *No longer on display, now archived. ON LOAN TO THE CLUNES COMMUNITY DURING THE 150TH GOLD CELEBRATIONS IN JULY, 2001, AND DISPLAYED IN THE ALL PURPOSE ROOM AT CLUNES PRIMARY SCHOOL.4 COLOURED PHOTOGRAPHS OF THE PORT PHILLIP MINE MODELlocal history, photography, photographs, mining

These are long obstetrical forceps following the design of Sir James Young Simpson (1811-1870). They are longer and heavier than Simpson's type of short forceps and were used to deliver babies from higher up the birth canal. Simpson's long and short forceps were adapted in many later designs. (Science Museum Group)Dr Mitchell Henry O'Sullivan worked in the Victorian country town of Casterton as a general practitioner from 1919 until his death in 1977. He also practiced obstetrics. His son, Dr David More O'Sullivan donated his obstetric bag and its contents to the College in 1999. The bag and contents are a unique time capsule of the type of instruments and pharmaceuticals used in the inter-war period.Metal forceps, consisting of two blades with detachable traction axis.obstetric delivery

The 1:32 scale model was built by Swedish model maker Carl Nordstrom and is now part of the Museums Victoria collection (currently not on display). The 1:48 scale model was built for display at the International Exhibition in London in 1862. It is now part of the British Science Museum, Wroughton, Wiltshire, United Kingdom. These models were part of a commission by Nordstrom who depicted a series of different gold mining extraction methods in Victoria from 1856 to 1859.Two photographs 1 x colour and 1 x Black and white in a dark wooden frame Showing models of Port Phillip Mine, Clunes, Victoria, Australia. Models are 1:32 scale constructed in 1858 using local materials and 1:48 build for possible display at the International Exhibition London 1862scale model, nordstrom

The abbey was founded by the Countess of Salisbury in 1229 for Augustinian Canonesses. It prospered throughout the middle ages. It was bought by William Henry Fox Talbot (1800-77). He was part of a scientific and enlightened group of men, which led him to discover the process of photography. The first photograph is said to have been taken from the windows of Lacock Abbey.In August 1835 Talbot made the earliest known surviving photographic negative using a wooden camera.The rare small photogenic image of the latticed window in the south gallery of Lacock is now in the collection of the Science Museum at Bradford, UK.Colour photograph of Abbey, Lacock, United Kingdomlacock abbey, church

Two paintings in Darwin Science and Art Museum by Theo Hansen (1870 - 1945) of Blackburn Lake. Studied in Melbourne National Gallery School and Paris. Exhibited at Victorian Artists Society until 1906.Two paintings in Darwin Science and Art Museum by Theo Hansen (1870 - 1945) of Blackburn Lake. artists, hansen, theo brooke, victorian artists society, heidelberg school, colonial school, shimmin, bruce

(Source: The First One Hundred Years by R.S. Medew and I.M. Bowman - A History of The Medew Family in Victoria - page 11 extracts) - Charles Turner Medew (1829-1915 ) arrived in Victoria from England in 1857. He eventually settled in Ringwood as the original purchaser of Crown Allotment 32, Section C, where he built his own home in 1888 and became well known locally "for his fine building work and stone masonry." ... "In his retirement, Charles Medew experimented with model helicopters. About 1910, at the age of 80 years, he was able to raise these helicopters to such a point of efficiency that, just with an elastic wound propeller, when released they could fly upwards to the height of the large oak trees." ... "(Also) In 1910, Charles obtained plans and made a model of the Wright Brothers' biplane entirely of wood, with laminated wood propeller and driven by twisted elastic bands." This model remained in his workshop for many years after his death and with his family's permission was eventually placed in the Melbourne Science Museum.3 pencil drawings showing assembled parts and sectional views of a model helicopter.

Postcard - black and white reproduction of a wall poster used by the Box Hill - Doncaster Tramway, includes sketch of Doncaster Tower, one of the tram cars and timetable. See Reg Item 699 and 198. Printed for the State Library of Victoria, by John Sands - Number PC11. Divided back, caption, printing information and bar code where a stamp would go. Robert Green advised by email 20-1-2018: "The tram in Russell Street was unveiled by the Premier, R J Hamer, on 1 May 1975. The ceremony was attended by F R Kirby, the Chairman of the M&MTB, and the Chairman (Judge Leckie) and Director (R H Fowler) of the Science Museum of Victoria." The tram was removed from the glass case when further development to the buildings occurred and temporarily relocated to Box Hill for the centenary of the Doncaster Tramway. 2nd copy of postcard - on rear - Has 33 cent stamp, postmarked for the Centenary of Cable Car Services, 11/11/1985 with a grip included and stamped "100 years of Melbourne trams carried on Commemorative official trip from Flinders St, Melbourne to Richmond Town Hall, November 11, 1985" in blue ink in the top left hand corner.trams, tramways, box hill, posters, timetables, doncaster, postcards, cable trams

"Potential blockage in the Fallopian tubes was assessed using this apparatus. It was developed by American gynaecologist Isidor Clinton Rubin (1883-1958). It blows carbon dioxide, via a cannula, into the uterus. The ease with which gas escaped through the Fallopian tubes was reflected by pressure changes on an instrument called a manometer. Blockage of the tubes is often due to previous infection or surgery. It is a common cause of infertility. Rubin’s test formed a standard part of infertility investigations for many years. It was gradually replaced by an X-ray technique involving radio-opaque ‘dye’ injected into the uterus." Source: Science Museum Group. Rubin’s apparatus for uterotubal insufflation, New York, United States, 1928. A639503Science Museum Group Collection Online. Accessed 12 June 2024. https://collection.sciencemuseumgroup.org.uk/objects/co96774/rubins-apparatus-for-uterotubal-insufflation-new-york-united-states-1928-tubal-insufflator. There is no manometer to monitor gas pressure on this model so it is either incomplete or a manometer was not available in this possibly early model. This device may be dated c1919, 1920s, or 1930s. 1919 was the year Isidor Clinton Rubin (1883-1958) introduced this apparatus. Rubin's tubal insufflator apparatus. Consists of a large cylindrical glass canister, with three glass nozzles at top with long rubber tubing attached to each. The device is inside a portable plywood box with two door. One surgical steel introducer, and one glass introducer, are also attached to the device.

"Potential blockage in the Fallopian tubes was assessed using this apparatus. It was developed by American gynaecologist Isidor Clinton Rubin (1883-1958). It blows carbon dioxide, via a cannula, into the uterus. The ease with which gas escaped through the Fallopian tubes was reflected by pressure changes on an instrument called a manometer. Blockage of the tubes is often due to previous infection or surgery. It is a common cause of infertility. Rubin’s test formed a standard part of infertility investigations for many years. It was gradually replaced by an X-ray technique involving radio-opaque ‘dye’ injected into the uterus." Source: Science Museum Group. Rubin’s apparatus for uterotubal insufflation, New York, United States, 1928. A639503Science Museum Group Collection Online. Accessed 12 June 2024. https://collection.sciencemuseumgroup.org.uk/objects/co96774/rubins-apparatus-for-uterotubal-insufflation-new-york-united-states-1928-tubal-insufflator. Model may be dated c1919 or 1920s or 1930s. 1919 was the year Isidor Clinton Rubin (1883-1958) introduced the apparatus. Instrumant has a label with Cyrus Jones monogram " Donated by Dr Lorna Lloyd Green, 1986/ Rubin's Insufflator/ NB "sparklet holder separate" missing?Rubin's tubal insufflator apparatus, large cylidrical glass canister inside a portable carry box with two doors with three glass nozzels at top with long rubber tubing attached on each. One surigical steel introducer, one glass introducer attached. A blood pressure manometer is fixed on the inside door. infertility

The Bedpan Toilet device is a special tool designed for people who are unable to get out of bed to use the bathroom. It helps them go to the toilet comfortably and conveniently without having to leave their bed. The device is placed under the person's bottom, and it has a container that collects urine or stool. It is easy to clean and can be emptied into a toilet or sink. The Bedpan Toilet device allows individuals who are confined to bed due to illness or injury to maintain their dignity and independence by providing them with a practical solution for using the bathroom while staying in bed. The word bedpan was first seen in the literature of John Higgins in 1572, and one of the oldest known bedpans is on display in the Science Museum of London. It is a green, glazed earthenware bedpan that has been dated to the 16th or 17th century. At that time, bedpans were made from materials including pewter, brass, pottery, glass, and porcelain. Bedpans were not a commonplace item in hospitals until the late 1800s. Florence Nightingale, who worked as a nurse in the United Kingdom from the mid to late 1800s, recorded death rates and causes for soldiers in military hospitals during the Crimean War and then correlated them to corresponding sanitisation procedures. As a result, Nightingale proposed several methods to improve the sanitary conditions in both military and civilian hospitals, including the addition of bedpans in order to reduce infection exposure from urine or faeces. https://www.wikiwand.com/en/Bedpan The use of bedpans is significant, as it allows a patient who cannot move much, to remain in bed and perform toilet functions.Bed pan ceramic white glaze with handle. Labelled "The New Slipper Bed Pan". Has specific instructions for use under the maker's label.‘THE NEW SLIPPER BED PAN. This slipper should be passed under the patient in front between the legs. If a flannel cap is made for the blade fastened by strings under the handle considerable comfort will be afforded.’ flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, nursing, bedpans, hygiene

The Ferranti Sirius is an electronic second-generation transistor computer and is one of three remaining examples of this machine left in the world. It was an important addition to the computing facilities at Monash University in the early 1960s and provided access for computer programming and research for many early computer professionals, academics and teachers. The Ferranti Sirius computer was built in a period of rapid growth in computing technology. The first stored program computers appeared in the late 1940s and used individual designs with valve technology. By the mid-1950s valve technology was replaced by transistors and the first mass produced commercial computers became available. The Ferranti Sirius was announced in 1959 and offered a “small” academic computer. It was designed and built by the English company Ferranti Ltd and sold through a local office of the company in Melbourne. The Sirius was manufactured at the Ferranti Ltd.’s West Gorton, England factory from 1959 to 1963 and, in all, the company produced probably 22 installations although only 16 were actually recorded as sold; this included one at Ferranti’s Bureau in London and one at Ferranti’s Melbourne Bureau. Only 7 were exported and 4 of these 7 were located in Melbourne, Australia. All four were associated with computing at Monash University – the Sirius in the MMoCH collection was purchased by Monash University in 1962, a smaller Ferranti Sirius was used on the Caulfield campus (prior to amalgamation with Monash University) from 1963, the Ferranti company had its own Ferranti Sirius initially temporarily installed at Clayton campus in 1962 and then placed in their office in Queens Road, Melbourne. A fourth computer was purchased by ICIANZ (now Orica) in 1962 and was transferred to Clayton campus in 1967. Only two of these Melbourne examples have survived; one in the MMoCH collection and one at Museums Victoria. There is an example of the Ferranti Sirius in the Science Museum Group collection in the UK as well. The Ferranti Sirius in the MMoCH collection was the first computer purchased by Monash University and it was shipped to Australia to be installed by November 1962. The University had a similar model computer on loan from Ferranti Ltd during the first part of the year and it was returned to the office of the company in Queens Road, Melbourne once the University’s own machine was installed. The computer was placed on site at Clayton campus, Monash University. The computer operated from 1962 until 1972 when it was officially decommissioned. The Ferranti Sirius was sold to Mr Paul Stewart in late 1974 and removed from Monash University. Mr Stewart later donated the computer back to the University in 1988 and it was transferred to the collection of the Monash Museum of Computing History after 2001. The Ferranti Sirius is an electronic second-generation transistor computer and is one of three remaining examples of this machine left in the world. It was an important addition to the computing facilities at Monash University in the early 1960s and provided access for computer programming and research for many early computer professionals, academics and teachers. The Ferranti Sirius is of scientific (technological) significance as one of the early transistor digital computers that transitioned computing from first-generation valve computers to second generation commercial installations. This example of the Sirius is of historical significance in its role as a part of the Computer Centre, Clayton campus, Monash University which provided computing facilities in Melbourne in the early 1960s when there were few installations available for academic, administrative and commercial users. Staff and students were able to undertake investigative research and learn programming techniques. The Computer Centre encouraged the use of the computer across all disciplines and this provided the base to establish computer science as a subject offering and, later, a new department in the University. This growth in computer education eventually culminated in the establishment of the Faculty of Information Technology, Monash University. The Ferranti Sirius in the collection at Monash Museum of Computing History has a main unit with a CPU and memory combined with input/output equipment and one extra cabinet of memory. The Central Processing Unit is a floor-standing unit which contains the computer circuits, power supplies and has a decimal digit display panel and a normal clock. A moveable control panel is placed in front of the Unit (Currently set on a recreated desk/filing cabinet support in the display). The Sirius base unit uses acoustic delay line memory with 1000 word store. An additional 3000 word memory cabinet is set adjacent to the CPU and can be connected to increase the memory. The computer is supported by a range of input/output devices. There is a Ferranti Paper tape reader, located on desk in front of CPU. Red label on front “Ferranti tape reader. Type TR 5. Serial No. 477”. Adjacent to the CPU is a set of Simplified tape editing equipment in three pieces which includes a (1) Table unit with switches on front face. Metal tag on reverse reads “Creed & Co. Model No. S4060. Serial No. 1457. Original Customers Marking GRP7 V706”. The table has a numbered internal tag “Table Serial No. 198579. (2)Creed teletype set on table unit. Metal tag on reverse “Creed & Co. Model No. 75RPR K4M4. Serial No. 5897 Made in England”. (3)Creed paper tape reader set on table unit. This set of equipment could read paper tape and print it, or copy paper tape while allowing it to be edited, or allow a programmer or data preparation person to type and punch a new program or data. It has no electrical connection to the computer. Paper tapes were usually torn off and carried across to the computer. There is also another table unit with switches on front face and changeable setting switch on front right side which holds a Ferranti Westrex paper tape punch set. Label on reverse “Teletype Code BRPE11” This was the Computer’s only output device. BRPE-11 is a teletype model number.

Stirrer, used in Optical Glass work, Hartung & associates, 1941 Ernst Johannes Hartung was a chemist and astronomer. Educated at the University of Melbourne (BSc 1913, DSc 1919), he became lecturer in 1919, associate professor in 1924, and succeeded Rivett as chair of chemistry in 1928, remaining in this position until 1953. Hartung?s lecturing style surged with enthusiasm and he employed the use of screen projections to demonstrate chemical phenomena to large undergraduate classes. In 1935 he recorded Brownian movement in colloidal solutions on 35 mm cinefilm, which was later copied onto 16 mm film for the Eastman Kodak Co. World Science Library. This can be viewed in the Chemistry laboratory. He researched the photo decomposition of silver halides, and was awarded the David Syme Prize in 1926. He devoted time to the design and construction of a large, new chemistry building for the School of Chemistry (built 1938?1939). During World War II he was approached by Professor Thomas Laby, chairman of the Optical Munitions Panel, to chair the advisory committee on optical materials, to produce high quality optical glass in Australia. This was successful, with large-scale production achieved within ten months at a reasonable cost. Hartung served three terms as general President of the (Royal) Australian Chemical Institute, was an ex-officio councillor of the Council for Scientific and Industrial Research, and a Trustee of the Museum of Applied Science (now part of Museum Victoria).

Stages in development of optical glass. Very early experiments by E.J. Hartung. Ernst Johannes Hartung was a chemist and astronomer. Educated at the University of Melbourne (BSc 1913, DSc 1919), he became lecturer in 1919, associate professor in 1924, and succeeded Rivett as chair of chemistry in 1928, remaining in this position until 1953. Hartung?s lecturing style surged with enthusiasm and he employed the use of screen projections to demonstrate chemical phenomena to large undergraduate classes. In 1935 he recorded Brownian movement in colloidal solutions on 35 mm cinefilm, which was later copied onto 16 mm film for the Eastman Kodak Co. World Science Library. This can be viewed in the Chemistry laboratory. He researched the photo decomposition of silver halides, and was awarded the David Syme Prize in 1926. He devoted time to the design and construction of a large, new chemistry building for the School of Chemistry (built 1938?1939). During World War II he was approached by Professor Thomas Laby, chairman of the Optical Munitions Panel, to chair the advisory committee on optical materials, to produce high quality optical glass in Australia. This was successful, with large-scale production achieved within ten months at a reasonable cost. Hartung served three terms as general President of the (Royal) Australian Chemical Institute, was an ex-officio councillor of the Council for Scientific and Industrial Research, and a Trustee of the Museum of Applied Science (now part of Museum Victoria).Optical glass

Large horseshoe magnet, given to young E.J. Hartung. by an uncle. Ernst Johannes Hartung was a chemist and astronomer. Educated at the University of Melbourne (BSc 1913, DSc 1919), he became lecturer in 1919, associate professor in 1924, and succeeded Rivett as chair of chemistry in 1928, remaining in this position until 1953. Hartung?s lecturing style surged with enthusiasm and he employed the use of screen projections to demonstrate chemical phenomena to large undergraduate classes. In 1935 he recorded Brownian movement in colloidal solutions on 35 mm cinefilm, which was later copied onto 16 mm film for the Eastman Kodak Co. World Science Library. This can be viewed in the Chemistry laboratory. He researched the photo decomposition of silver halides, and was awarded the David Syme Prize in 1926. He devoted time to the design and construction of a large, new chemistry building for the School of Chemistry (built 1938?1939). During World War II he was approached by Professor Thomas Laby, chairman of the Optical Munitions Panel, to chair the advisory committee on optical materials, to produce high quality optical glass in Australia. This was successful, with large-scale production achieved within ten months at a reasonable cost. Hartung served three terms as general President of the (Royal) Australian Chemical Institute, was an ex-officio councillor of the Council for Scientific and Industrial Research, and a Trustee of the Museum of Applied Science (now part of Museum Victoria).Horseshoe Magnet �