Ganger's Trolly Turntable When a railway gangers trolly was working between railway stations, occasionally it was required for the line to be clear for trains to operate. Many trollys were too heavy to physically lift off the track, so a turntable was needed. These were provided at designated locations, and in some cases the trolly had a turntable on board. The turntable would be placed on the rails and the trolley driven onto it. The turntable would then be rotated 90 degrees by human power and the trolley pushed off on to a prepared set of rails on the side of the line. The turntable would then be removed from the track allowing trains to run through that section. The gang could then get on with the work required near that location. Historic - Railway Permanent Way and Works - track equipment - Ganger's Trolly TurntableGanger's Trolly Turntable made of wood with wrought iron fittings puffing billy, ganger's trolley turntable, trolley, trolly

Ballarat East Railway StationColour photographs showing the train turntable at Ballarat East.ballarat east railway, turntable, railway

Large Gangers Trolly Turntable Many trollys were too heavy to physically lift off the track, so a turntable was needed. A railway gangers trolly was required to be "off tracked" at its working location, so that it would be clear for trains to operate. A special track at right angles to the running line was usually provided. When all the work was completed and after all the trains had cleared, the trolly was then "on tracked" so that it could proceed to its next location. These turntables were also in use at the Works Depot location. They were provided at designated locations, and in some cases the trolly carried a turntable on board. To allow for more than one trolly to be taken off the line, a longer version was available for use. The turntable would be placed on the rails and the trolly driven onto it. The turntable would then be rotated 90 degrees by human power and the trolly pushed off on to a prepared set of rails on the side of the line. The turntable would then be removed from the track allowing trains to run through that section. The gang could then get on with the work required near that location.Historic - Railway Permanent Way and Works - track equipment - Ganger's Trolley TurntableLarge Gangers Trolly Turntable made of wood with wrought iron fittingspuffing billy, gangers trolley turntable, trolly, trolley

These two plans are copies and show drawings for a proposed turntable at the Warrnambool Railway Station and railway crossings at Gilles Street in the Liebig Street precinct. The Warrnambool Railway was opened in 1890 and the Warrnambool Railway Station building was erected a few years later. These plans, being copies, are of minor interest as they show plans of some projects in the Warrnambool Railway Station precinct in the latter half of the 20th century.These are two sheets of cream-coloured paper with plans (copies of original) drawn up in black ink. The drawings are fading somewhat and are faint in places. One sheet (.2) has a piece missing from the top left hand corner. .1 ‘Locality Plan of Rail Crossings Liebig St. & Gillies (sic) St.’ .2 ‘Proposed Turntable Site Warrnambool Railway Station’ plans, warrnambool railway, warrnambool rail turntable

This record player was purchased in 1960s by an Emerald couple for their family to use. The turntable is a multi-play turntable originally found in mid-century console stereos. The turntable was superseded by CDs (compact discs) in the 1980s and, in the 21st century, by streaming music. In recent years, there has been a resurgence in the popularity of turntables driven by a desire for analog sound quality and the tactile experience of physical media. The LP (long playing record) was first invented in 1948 and resulted in an explosion of album-based music. The 78 rpm shellac discs, which were in operation up until that time, could hold barely four minutes of music per side compared to the LP's capacity of 23 minutes of music per side.The record player and the LP are 20th century technologies which are enjoying a new wave of popularity.1, Garrard Ferguson 2025TC turntable 2. Thorn Electrical Industries - Ferguson 201SA amplifier 3. Summit LP - Harry Secombe - if I ruled the worldTurntable - 'Fergusson' Amplifier - 'Model 201SA serial 2968 - duplicate FRC Ltd.' LP record - 'Summit Stereo - If I ruled the world - Harry Secombe'turntable, lp

Robin Boyd had the sound system put in by a friend who ran the iconic Thomas’ Music in the city of Melbourne. The Boyd family thinks that Robin designed the facade and logo for Thomas’ Music. Penleigh Boyd recalls "there was no 'hi-fi' record player in the living room until about 1963. Robin always had the speaker holes in the floating joinery unit but couldn’t afford the necessary equipment till years after we had moved into the house. Apparently one time some guest looked at the speaker holes (they had matchstick blind screening) and asked Robin what type of equipment he had. That was enough for Robin, and he immediately had a system installed - the one that is still there." (See also the amplifier item F030.)Turntable without lidthomas' music, sound system, walsh st house, ohm2022, ohm2022_8

Colour photograph of the train turntable and William G. Pert Railway Workshops of the Diamond Valley miniature railway. A number of locomotives are visible.eltham, diamond valley railway, eltham lower park

Stawell Railway A Class Loco. On Turntable at Stawell and Staffstawell transport

Stawell Railway turntable and Staff. Taken at Stawell Locomotive Sheds.stawell transport

Stawell Railway A Class Loco on turntable and Staff. Taken at Stawell Locomotive Shedsstawell transport

Stawell Railway turntable and Staff. Taken at Stawell Locomotive Sheds and Coal Staging before the transfer of many railway men to Araratstawell transport

This Victorian railways constructed turntable is used for turning around locomotives. It is 16.2 meters long and is hand pushed either direction. Originally broad gauge (5 foot 3 inches) and located in the Newport Locomotive workshop area it was relocated to emerald and 2-foot 6-inch railway track fitted to it and is used by the Puffing Billy Railway to turn their locomotives and carriages Historic - Victorian Railways - Turntable used at Newport Narrow Gauge Turntable made of metal and steelturntable, victorian railways, puffing billy, emerald, newport

American Style Ladder, built by the American LaFrance Company, of Elmira, New York, as Lend Lease Appliances, during World War 11 The genesis of the vehicle is the City Service JO Series Ladder, which in this form became the JOX, - X for Export, model, as some items of equipment were not requested in the U.S. Treasury Department specification for these vehicles. Seven of them came to Australia in 1942 / 43, and all bar two are still in existence / preservation, in various States. Initially, they were supplied to the MFB, and later transferred to the CFBB / CFA.

Steam locomotives J-549 and K-163 in distance.Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencygeorge coop collection, ararat locomotive shed, j-549, j-class steam locomotive (vulcan foundry), k-163, k-class steam locomotive (vr newport workshops)

Image dated as November 1963 based on same image in Port of Echuca collection (print 19.5 x 24.5cm) On reverse in pencil: " J Class 1940-1960's" . In blue pen:" Photo by: George L. Coop Nov 1963" https://victoriancollections.net.au/items/59dea30a21ea6b12dc430192Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyechuca railway station, george coop collection, j-500, j-class steam locomotive (vulcan foundry), railway turntable

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyechuca railway station, george coop collection, j-526, j-class steam locomotive (vulcan foundry), railway turntable

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencyechuca railway station, george coop collection, j-526, j-class steam locomotive (vulcan foundry), railway turntable

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencycoal hopper, echuca, echuca railway station, george coop collection, r-727, railway turntable, r-class steam locomotive

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencycoal hopper, echuca, echuca railway station, george coop collection, r-727, r-class steam locomotive, railway turntable

The Gramophone Company Limited, based in the United Kingdom, was one of the early recording companies. It was founded in 1898. That same year Fred Gaisberg moved from the United States to London to set up the first disc recording tudio in Europe. In 1900 William Owen, an English man, gained the manufacturing rights for the Lambert Typewriter Company and the Gramophone Company and for a few years was renamed the Gramophone & Typewriter Ltd.Timber gramophone box with turntable, needle arm, clamp and horn. No winder. .2) - m14/57 - gramophone clamp for horn .3) - m14/45 - gramophone arm with needle .4) - m222 - gramophone horn Turntable pad very wornSticker on side of box "The Gramophone Company Ltd City Road, Finsbury Square, London (Great Britain, Germany, France, Belgium, Russia)"gramophone, recording company, united kingdom, typewriter, william owen, fred gaisberg, horn, needle arm, turntable, horn clamp, gramophone company

Donated by Glenda McLeod nee Sebire.Cream and pink, portable, combined turntable and radiogram. With a Decca vinyl record on the turntable.'Astor' 'Playgram'radiograms

The Kiewa Hydro Electric Scheme (KHES) produced electricity for the people living in the Kiewa Valley and beyond to many parts of Victoria. The people and their families working on the Kiewa Hydro Electric Scheme were encouraged by their employer the State Electricity Commission of Victoria to purchase and use electrical appliances. The iron was popular as it was quick and easy compared to those used previously. This iron belonged to Ron White who was a senior member of staff during the construction and operation of the KHES.This iron was owned by Ron White. Ron was appointed Area Operations Engineer at Kiewa in June 1956. He was later appointed as General Superintendent and then in 1974 appointed to principal Hydro Engineer of the recently titled Hydro Division.Electric iron with long cord attached at the side toward the back. Iron shape is of an oblong with pointy front. When laid down, the black handle is at the top with a red button centre front (to choose between steam and dry). Under the handle is the 'turntable' (used to select type of material/heat). At the front of the black is an outlet for the steam. Beneath the black section is the metal shiny cover and solid base.Dial (turntable) - centre red with 'Hoover' and red section on outside with 'steam'. To the left of 'steam' is 'High, Linen, Cotton, Wool'. To the right of 'steam' is 'silk, rayon, nylon'. On the handle at the front "Hoover" in gold.electric appliances; steam iron; electric iron; laundry; ron white; kiewa hydro electric scheme; hoover industries.

K158, J512, K168 and J507 stand around the turntable in the locomotive shed. November 1962" - Newsrail October 2020Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencybendigo railway station, george coop collection, j507, k158, j512, j class steam locomotive, turntable, workshop, depot, shed

Navarre Rail Yards Turntable 16 December 1953transport, railways

Colour photographs showing the train turntable at Ballarat East.ballarat east railway, ballarat, railway

Thomas Edison invented the gramophone in 1877. It was used to play vinyl 78 (speed) records and was played by being 'wound up' by a lever on the side.The Wallace family lived on a farm in the Kiewa Valley. They used the gramophone to play music for entertainment from circa 1918. When it was no longer being used the family stored it in their shed and then passed it on to KVHS in 1995. KVHS stored the derelict Edison gramophone from 1995 until 2025 when it was passed on to the Mt Beauty Men's Shed. Their members decided to restore it and were then able to return it KVHS in working order in May 2026. Edison 1918 phonograph Diamond disc Mahogany wood Mahogany wood with turntable at the top and cupboards below. The door to the cupboard opens to the side and is used for storing records.The turntable has a diamond discOn the player on a circular disc is the inscription: "The Model 250 / Diamond Disc / Phonograph is the / Official Laboratory/ Model Thos A Edison" Inscription on black rectangular disc: Edison Disc Phonograph Model No. C250 manufactured under the patents of Thomas A. Edison, and others .... Serial number SM49344 . (Note: This is what identifies it as 1918.)gramophone, phonograph, thomas edison, music records, entertainment, wallace family

Almost identical to American Goodell Patent. But this example was made in Germany.Turntable type apple parer/corer, with a wooden handle, on a wooden base."Made in Germany"apple corers, apple peelers