RAILWAYS COLLECTION 2 x -Colour Photos of Elphinstone Tunnel (this photo was used by Jim Evans in his booklet -Melbourne to Bendigo Railway 1862-2012 and quotes the Photographer as Geoffrey Russell). The photo is printed on quality paper showing an entrance to the tunnel which is in fair condition with bricks and stone on the face and has two train tracks running through.Geoffrey Russellphotograph, landscape, elphinstone tunnel long rail laid bendigo, wednesday.—one of the most unusual operations undertaken by the victorian railways took place on the bendigo-melbourne line at the elphinstone tunnel this afternoon, when two rails, each 1, 710ft. in length, were placed in posi- tion in the tunnel. these rails were the longest ever laid in victoria, the previous greatest length being 225ft. the tunnel, which is 1, 254ft. in length, is the longest in the state, and forms an historic link with the early railways of victoria, being constructed in 1862, three years after the first train ran in australia. the object of the work is to improve the track for the fast train services and to reduce the cost of maintenance. by putting in a welded rail right through the tunnel the use of "fish plates" will be eliminated. for the new undertaking 110lb. rails are being used to replace the 80lb. rails at present in use. the rails, each weighing 30 tons, were made from 38 sets of rails of 45ft. each, the welding taking place on the site of the work. hauled by an x35 locomotive the long rail was placed in position 3½ minutes after the first pull. the work was carried out without any in- terruption to traffic.

Before 1851, letters sent through the mail were charged by the number of sheets it contained and the distance it travelled. For example, a letter consisting of one sheet of paper was charged the single rate; a double letter, that is two sheets, was charged double the single rate, a treble letter, was charged three times the single rate, and so on. In other words, each additional sheet of paper increased the charge by one rate. In Great Britain. Sealing a letter in an envelope effectively put an end to postal clerks' ability to count the number of sheets in a letter and an alternative method of determining the postage had to be found. Overweight mailings had previously required the items to be weighed but with the introduction of the Uniform Penny Postage act of 1839, the public could mail a letter not exceeding a half-ounce in weight within the United Kingdom for one penny if prepaid, or two pence if paid on delivery. At about the same time that the adhesive postage stamps and envelopes made their appearance, postal administrations began to experiment with strategically placed street letter boxes, known as pillar boxes because of their round, pillar-like shape, that permitted the public to mail letters from a place other than from a post office. For all these reasons, the use of postal scales became the nucleus of every post office. Scales had been in use since ancient Egyptian times so their use for everyday commerce was not unusual in the 1800s. What was new in 1840 was their ubiquitous use throughout the postal system. No post office could function effectively without one. Although the earliest scales used in post offices did not differ markedly from the ones in general use as time went on they were adapted specifically for postal use. For example, a paper sleeve, also known as a weight sticker, was attached that showed the applicable rate of postage for any given weight. This innovation was quite a time saver as postal clerks no longer needed to weigh the item first and then refer to a separate chart to determine the required postage for that particular weight. Victorian postal scales were used in village Post offices in the late 19th century, of which there are many examples today for sale. No maker can be attributed to the manufacture of the item. Postal scales with weights,. Balance scale has brass fittings and is mounted on a rectangular wooden stand, with depressions for brass weights; which measure 1/2oz, 1oz, 2oz, "Young Aton REL., C.N.0.9."flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, scales and weights, balancing scales, postal scales, letter scale

A list of businesses which occupied Nos 1-38 Alfred Street, Blackburn.alfred street, blackburn

Collection re G.A. Jones 3790932, refer Cat No 10053.2P for his service details. .1) This document accompanied the Discharge Certificate (.2) and Will advising Graeme to sign the Certificate of Discharge now having completed his prescribed period of service in the ARAS (NS) which included 1 year & 93 days service in Malaya with 8RAR..1) Document, paper, all print in black, copy of original. .2) Discharge Certificate AAF - A16, brown buckram covers with black text on front, rear is blank. Inside has one page pasted in partially, yellowish colour, all print in black, entries typed in black and signed same.Inside, Main points, "PT662 - 3790932 Private Graeme Arthur Jones - 1/2/67 - 31/1/69 - 28.2.69 - Rifleman"certificate, discharge, g a jones

An example of badges issued by Legacy prior to 1966 for fundraising during the Legacy Appeal and Badge Week. Their donation value was 20 shillings which is £1. The symbol of Legacy is the Torch and Wreath of Laurel. The Torch signifies the undying flame of service and sacrifice of those who gave their lives for their country. The Wreath of Laurel is the symbol of our remembrance of them. Examples of early Legacy badges that were sold up to raise money for Legacy's work. These were before decimal currency was issued in 1966.Legacy Appeal badges x 4 with the Legacy torch and wreath issued prior to 1966, they are gold metal with white enamel, with dark blue enamel around the word Legacy and red enamel in the flame.Kite and hexagonal shaped brooch say '20/- D.N.T.' on reverse. Oval and rectangular brooch say '£1 "Parxite 77" AJ Parkes Brisbane' on reverse.legacy appeal, fundraising, badge week

GOLD CIRCULAR MEDAL WITH SEMICIRCULAR BANNER ON WHICH IS WRITTEN "AUSTRALIAN COMFORTS FUND, BALLARAT". BELOW THIS IS THE COAT OF ARMS OF AUSTRALIA : FROM L TO R : UPRIGHT KANGAROO HOLDING A SHIELD ON WHICH ARE 1. THE EUREKA FLAG .2 THE SOUTHERN CROSS .3 CROSS .4 BIRD .5 SWAN & STARS .6 LION AN EMU HOLDS THE OTHER SIDE OF THE SHIELD. UNDERNEATH IS A RIFLE, UNDER THIS IS A BANNER WITH READS TRENCH SHOP 1918 FRONT - AUSTRALIA COMFORTS FUND, BALLARAT REVERSE - TRENCH SHOP, 1918local history, numismatic, medals, military

The Regiment was equipped with M113 family vehicles, some of which deployed with 1 Troop A Squadron in South VietnamSide bound A4 size 78 page reportISSN 1036-7632 ISBN 0 642 808600m113, audit reports, tanks

Soccer was a popular sport especially in Europe. Mt Beauty was able to field a team in the local competition.Mt Beauty is in the Kiewa Valley. In 1959, there were some very good soccer players as many in the workforce for the Kiewa Hydro Electric Scheme were from Europe.Very dark blue pure wool blazer. The top dection is lined as are the long sleeves which have 1 silver button at the end. (There is another button in one of the pockets.) The pocket on the left has a sewn patch with "Mount Beauty" above a mountain in front of which is a soccer ball. Underneath the mountain "Soccer Premiers / 1959 / "Bor Dist. Assoc" ?District Association". there are 2 buttonholes at the front but no buttons at the front. There are pockets on each side near the bottom..soccer, european soccer players

Diggers & Mining. The gold licence. The Government Camp. (As a result of the widespread dissatisfaction with the licence system which culminated at Eureka, the licence system and the system of goldfields administration by Goldfields Commissioners were abolished in 1855. For the rest of the gold decade, the digger was required to take out a miner's right - which cost 1 pound per year. The various systems of goldfields administration adopted after 1855 are set out in Unit 8 of this series.) Markings: 41 994.LIF. 4. Used as a teaching aid.hanimounteducation, tertiary, goldfields

The former Williamstown Post & Telegraph office which is located at 1 Parker Street, was designed by William Wardell and CG Ross and constructed by Daniel Sexton in 1860 with later additions. nelson place, williamstown post office

The former Williamstown Post & Telegraph office which is located at 1 Parker Street, was designed by William Wardell and CG Ross and constructed by Daniel Sexton in 1860 with later additions. nelson place, williamstown post office

Multiplex mechanical stereoplotting equipment was used at the Army Survey Regiment, Fortuna Bendigo. c1950s. Multiplex equipment was imported from the UK in 1951 and introduced in the following year, to accelerate map production output covering CMF training areas at 1:25,000 map scale. Multiplex plotting was a productive advancement replacing the ‘Arundel’ method of graphical plotting planimetric detail that was expensive and slow, especially in timbered mountainous terrain. Air photos were made into small diapositives and mounted on racks in the exact position relative to when the aerial photos were taken. The technicians operated the Multiplex in a darkened room, with one photo projected with a green filter and the other through a red filter to form a 3D view of the overlapping photos. The 3D model projected onto a platen, which was a small platform that was raised up and down. The technician viewed the 3D image with special glasses fitted with red and green lenses. In the centre of the platen was a small pinhole that served as a floating mark, with a vertical pencil located exactly below the pinhole. This tracing table was moved to follow the topographic feature or contour line and draw it on the paper underneath. The technician raising or lowering the platform’s floating mark to match the height of the 3D terrain. It also replaced the slotted template method of mechanical adjustment of strips of aerial photography, however was restricted to each strip rather than between strips in the block. Although the Multiplex was phased out of production in 1968, it was used in the training of photogrammetry and aero-triangulation at the School of Military Survey located at Bonegilla, Victoria until the early 1990s. The history of the Multiplex is covered in more detail with additional historic photographs, in pages 50 to 51 of Valerie Lovejoy’s book 'Mapmakers of Fortuna – A history of the Army Survey Regiment’ ISBN: 0-646-42120-4. This instrument is only one of the projectors of a set and is unfortunately missing its platen, coloured filters and coloured glasses. A cardboard set of glasses is included as an example. Another Multiplex instrument is in the collection as Item 9039.4A black wooden box containing a Multiplex Unit Projector (incomplete). The Multiplex has a Lamp Head, Barrel Housing, Body of the Projector and a Platen which is missing. .1 Protective wooden box .2 Multiplex Instrument .3 Multiplex Instrument Parts Diagram .4 A bank of Multiplex projectors in operation WILLIAMSON MANUFACTURING CO, PHOTOGRAPHIC ENGINEERS, SERIAL NUMBER 3437, TYPE MPC, LITCHFIELD GARDENS, LONDON AND READING.royal australian survey corps, rasvy, fortuna, army survey regiment, army svy regt

WW1 example of Australian ManufacturingWW1 example of Australian manufacturingThe bayonet was designed at the Lithgow Small Arms factory in Australia starting around 1913, just prior to WWI. The Lithgow 1907 Bayonet would become Australia’s staple weapon along with it’s counter part, the Enfield No1 Mark III rifle. The wood on the hilts is often referred to as furniture and then starting around 1916 Queensland Mapleread moreScabbard on the reverse marking stating MANGROVITE 43. Wooden Hilt has no visible markings. Hilt of the bayonet one side is stamped Lithcow 3 '21 over a crest of a six pointed star and a shield which encapules 1907 /1. The pommel also contains a button locking release from the rifle slide mount.wooden handle, leather scabbard

See Photograph B93.754 - possibly this jar in useGlass bell jar sealed in leather base, air vent in bottom, cork in neck with hollow glass tube through centre into jar, which has 2 outlets - 1 yellow, 1 black.chemistry, bell jar, artifact

Wood plaque mounted with a metal medal and a plastic label which states 'US - Australia...October 1-3, 1982'. Materials: Wood, Metal, Plastictennis

Photograph shows cast iron axle box and horn ways with rubber "springs" as used on John Stephenson New York built cable trailers which became Melbourne numbers 1 to 20.Yields information about cable tram componentsBlack and white photograph with note on rearIn ink "24" and "K McC"cable trams, trailer trucks, john stephenson, cast iron, rubber springs, melbounre number 1

The photograph shows a view of Sunbury Railway station as it was in the 1970s and earlier. he image is looking south to the railway crossing at Station Street and the storage sheds which were along Platform 1, where the trains for Melbourne left.A non-digital coloured photograph of a railway station and pedestrian bridge spanning the tracks.sunbury

Educational toy used by donor's granddaughter Yellow plastic egg box containing twelve plastic eggs which open to reveal numbers 1-12. Used to teach counting and basic co-ordination skills to children.One Dozen Counting Eggs. Child Guidancetoys, general

WW1 bayonet manufactured in Australia.WW1 example of Australian Manufacturing The bayonet was designed at the Lithgow Small Arms factory in Australia starting around 1913, just prior to WWI. The Lithgow 1907 Bayonet would become Australia’s staple weapon along with it’s counter part, the Enfield No1 Mark III rifle. The wood on the hilts is often referred to as furniture and then starting around 1916 Queensland Maple was used. Queensland Maple would continue to be used until about 1941.Scabbard on the reverse marking stating MANGROVITE 44 and /i\ B. Wooden Hilt has marking of 6 pointed star and an A imprinted into it. (Both sides.) Pommel is stampted wi a serial number of A 76966. Hilt of the bayonet one side is stamped Lithcow 3 '21 over a crest of a six pointed star and a shield which encapules 1907 /1. The pommel also contains a button locking release from the rifle slide mount.1907, bayonet

Poster displaying WW1 Distinguishing badges colours and patches of the AIF. These colour patches identified units and formations of the Australian Army which fought during World War 1Poster is a tribute to the soldiers of WW1Carved timber framed poster with rising sun crest with flags and columns of coloured symbols and shaped badges.The Great War 1914-1918 Colours & Patches Distinguishing Badges of the Australian Imperial Forcesww1, great war, aif, colours & patches, distinguishing badges, 1914-1918

Eberhard Schuster was a German wool buyer and interned in Camp 1 during WW2. He is standing in front the skittle alley which he operated at Camp 1. Photograph taken in 1991.Colour photograph of Eberhard Schuster, standing in front of a stone wall, behind which are gum trees. Mr Schuster is attired in brown strides, white jacket, black beret and walking stick.german wool buyers, eberhard schuster, camp 1, skittle alley