Colour photograph mounted on card accompanied by students and teacher names.See JPG above.williamstown high school, 1997, 9 mm, michelle mansas, class photographs

A blue coloured cardboard cover which has signs of water damage on it and it is slightly buckled. Under the Australian Army Insignia is the niformation in black ink. Top right hand corner reads 7610-66-107-6806. There are two punch holes down the left hand side.There is a name in blue ink which I think reads Sgt Raynant, D. F. The description of the cover is different to the one inside of the cover which reads: Australian Army: Manual of Land Warfare. Part Two Corps Doctrine Infantry Training Volume 4 Infantry Small Arms. Pamphlet No 3 The Sub Machine Gun 0 mm F1 (All Corps) 1983australia - armed forces - service manuals, land warfare, infantry training, sub machine gun 9mm f1, corps doctrine, infantry small arms

A booklet without a cover which is held together by a metal bulldog clip. The infomation on the front is in black. Top Right Hand reads 0652-02-130-2050 There are five punch holes down the left hand side.australia - armed forces - service manuals, land warfare, 5.56mm australian steyr, infantry

5 x 9 mm drill rounds X 4ammunition, ww2, army

Used in the Vietnam War period.Infantry Platoon Weapons, Submachine Gun 9 mm F1 1966,

The pewter tankard is part of a set of two that were presented to Lt. Col. L.G. Stevens of the 4th Light-horse Regiment. The Regiment was part of the Australian Military force in the First World War (WW1). At the end of WW1 the regiment was disbanded and it was re-raised in the 1920's as a part-time unit in the Shire of Corangamite, South Western Victoria. In World War 2 the 4th Light-horse Regiment was mechanised and became the 4th Motor Regiment. Lt.Col. Stevens served in both wars and was discharged in July 1942.. The tankards were probably presented to Lt. Col. Stevens at his retirement from the service. The set of two pewter mugs is of historic significance because of its connection to WW2 and the AIF. It indicates the relationship between Officers and Men of the regiment. It is of local significance as Lt. Col. Stevens was born and lived in Warrnambool, South Western Victoria. Pewter tankard (one of two) height 13mm circumference 3mm, ornate broken C handle height 9 mm, inscription on front, hall mark on base, mild tarnish, Inscription on front "PRESENTED TO LIEUT COL L.G. STEVENS ED. By the Officers of the 4th MOTOR REGIMENT 1.5.42 Hallmark on base "Crown & Rose" CAST PEWTER, CREST CROWN & ROSE3 surrounded by FIDE IN LONDONpewter tankards, world war 1, first world war, ww1, light horse regiment, 4th motor regiment, australian military force, aif, corangamite, 1942, world war 2, ww2

The pewter tankard is part of a set of two that were presented to Lt. Col. L.G. Stevens of the 4th Light-horse Regiment. The Regiment was part of the Australian Military force in the First World War (WW1). At the end of WW1 the regiment was disbanded and it was re-raised in the 1920's as a part-time unit in the Shire of Corangamite, South Western Victoria. In World War 2 the 4th Light-horse Regiment was mechanised and became the 4th Motor Regiment. Lt.Col. Stevens served in both wars and was discharged in July 1942.. The tankards were probably presented to Lt. Col. Stevens at his retirement from the service. The set of two pewter mugs is of historic significance because of its connection to WW2 and the AIF. It indicates the relationship between Officers and Men of the regiment. It is of local significance as Lt. Col. Stevens was born and lived in Warrnambool, South Western Victoria. Pewter tankard (one of two) height 13mm circumference 3mm, ornate broken C handle height 9 mm, inscription on front, hall mark on base, mild tarnish, Inscription on front "PRESENTED TO LIEUT COL L.G. STEVENS ED. By the Officers of the 4th MOTOR REGIMENT 1.5.42 Hallmark on base "Crown & Rose" CAST PEWTER, CREST CROWN & ROSE3 surrounded by FIDE IN LONDONpewter tankards, world war 1, first world war, ww1, light horse regiment, 4th motor regiment, australian military force, aif, corangamite, 1942, world war 2, ww2

Memorial card in Memory of Elizabeth Dower of Trebost, Stithians who died 25/10/1889, age 82 years. Card opens out and has a 9 mm black border front, back and inside. On the front is printed In Memoriam, with some filigree work around it. On the inside is a small poem.person, individual, death, memorial card, elizabeth dower

This was a blue cardboard covered book. In the centre of the cover are the letters 'C of A' with a broad arrow underneath. The book is bound with two metal staples. Inside has ruled pages, 9 mm between lines, the owner has ruled up a few pages in red biro. Only pages 1 and 4 have any writing. P.1 'Duties of a Steward'.On top right of front cover written in blue biro is :- "3795952" Pte W. D. Patterson".vietnam war, training, steward duties

.1) Box, cardboard, brown colour for 9 mm cartridges. Box holds 40 cartridges. .2) Necklace made from small shells, colours soft white, brown & grey. .3) Bracelet made from same shells as .2). .4) Bracelet made from same shells as .2). .5) Bracelet made from same shells as .2)..1) “7 Feb 1944”costume accessories - jewellery, arms - accessories

Pittock tools collection: contains: * Sharpening stone in original Australian Abrasives Pty. Ltd. cardboard box. Stone is made of silicon carbide in a wedge shape 113 mm L x 45 mm W x 9 mm thick * Hardwood wedge, 110 mm L x50 mm W x 5-20 mm thick Items stored in Pittock coach builder's box, reference 13000.1.

The garment was a sealed sample 26 feb 1962. It is unknown when the dress was replaced. It is a representative example of this type of uniform in the period.The dress is in excellent condition.Light green,short sleeves.410mm shoulder to shoulder.1018mm top of collar to bottom of dress.320 mm wide waist.25mm sleeve from shoulder top to sleeve end. Sleeve cuff 4 cm wide.Two pockets on front, each set 12 cmm below waist and 9 mm from edge of centre opening.bottom of pocket is 10 cm from edge of centre opening.The dress opens at front with 8 button holes (24mm) openings,with a neck button loop(2cm). Two epaulettes 5cmm x 11 cm(long). The pockets have a sewn flap 2cm long from pocket top and 5 cm (at apex) from top of pocket.Two loops (5cm high) at each side of dress.A loop for hanging dress is inside collar at rear.Three press studs at front to fasten dress.Attached certificate in plastic seal. “Department of Army - inspection service/ SFC 8.3.13. (June 1958). Sealed sample/ sealed pattern no class 8415 article/CLO 1489 DRESS WOMEN’S indoor uniform,short/sleeves.RAANC,S55./ the supply is not to differ from this sale sample except in such/ respects as may shown on back thereof./Approved 26.2.1962/ for Director of inspection” On reverse of sealed tag is: “ measurements shall be as specified.Buttons/RAANC Line 30 (fronts) . Buttons RAANC LINE 26/(SHOULDER STRAPS).”dress, women’s, raanc, short sleeve, uniform

Railway Platform Barrier Crowd control on railway platforms was a necessity during peak times. At times it may have been necessary to direct passengers to a certain exit or from a certain entrance on a railway platform. Where able, on occasions, two trains may have to use the one platform to ensure trains depart efficiently. To ensure the public entrain on the correct train it could be necessary to divide the platform by using a platform barrier. The barriers made of wood and steel were easily moved by platform staff and provided a substantial barrier on the railway platform. Historic - Victorian Railways - Railway Platform BarrierRailway platform Barrier made of timber and steelLength Overall: 7' 6 9/16" ( 2300 mm ) Width: 2' 5 15/16" ( 760 mm ) Height: 4' 1 5/8" ( 1260 mm ) railway platform barrier, victorian railways, puffing billy

52NBH - Excursion Car for wheelchairs - specially built for Wheelchair access allowing it to carry 24 passengers or 20 passengers and 3 wheelchairs, or 16 passengers & 6 wheelchairs Puffing Billy Service History or Notes Coupled Length 31 feet 4 inches (9550 mm) Width 6 feet 3 inches (1905 mm) Height 9 feet 2 inches (2794 mm) Weight 8 tons Capacity 24 passengers, or 20 passengers and 3 wheelchairs, or 16 passengers and 6 wheelchairs Number Built 2 In use 2 In 1981 the first of two extended NBHs with provision for wheelchair passengers (double door access and fold-up seats) was built, the second following in 1983. These were numbered 51 & 52 - a separate number series because of their length made them different from the other NBHs. May 2016 - In for repairs to the roofHistoric - Puffing Billy Railway Narrow Gauge - Passenger Rolling Stock: Excursion Car specially built for Wheelchairs access52 NBH - Excursion Car for wheelchairs - specially built for Wheelchair access allowing it to carry 24 passengers or 20 passengers and 3 wheelchairs, or 16 passengers & 6 wheelchairs made of wrought iron and timber52NBHpuffing billy, pbr, rolling stock , 52 nbh, narrow gauge - passenger rolling stock: excursion car for wheelchair

24 NB - Carriage (NB 3rd series) 6 compartments (36) Vehicle Length 29 feet 6 inches ( 8992 mm) Coupled Length 31 feet 4 inches (9550 mm) Width 6 feet 7 inches (2007 mm) Height 9 feet 9 inches (2972 mm) Weight 11 tons Capacity 40 passengers, or 36 with guard's compartment. Built 1906 - 1915 Number Built (1st Series) 6 Number Built (2nd Series) 17 Number Built (3rd Series) 4 In use NB 24 VR Service History NABAB 4.VA - 18/ 9/1909 NWS Built new - circa 1910 - To NAB 4.VA - NAB 4.VA - 18/ 6/1917 - To NB 24.VA - *NB 24.VA - / 6/1926 - Modified AC Malco 19/ 1/1932 NWS Into Workshops - 10/ 5/1932 NWS Out of Workshops (113 days) 21/ 6/1933 NWS Into Workshops - 17/ 8/1933 NWS Out of Workshops (58 days) 28/ 8/1934 NWS Into Workshops - 13/ 9/1934 NWS Out of Workshops (17 days) 9/ 2/1937 NWS Into Workshops - 17/ 3/1937 NWS Out of Workshops (37 days) 31/ 5/1940 NWS Into Workshops - 5/12/1940 NWS Out of Workshops (189 days) 27/ 1/1948 NWS Into Workshops - 29/ 7/1948 NWS Out of Workshops (185 days) 12/12/1954 - Scrapped Body to Eng. Spcl Works 17/ 8/1957 - Traced at Stocktake STET - Return to Register Puffing Billy Service History or Notes NB (3rd series) The Puffing Billy Railway built a guard's compartment built in 24 NB. This reduced the passenger capacity to 36. The car retained its classification as NB in an attempt to emphasise that this was only a temporary conversion. The NBC classification was already in use. One day the guard's compartment will be removed and the vehicle returned to the classification of NB. The guard's compartment has a radio, air brake taps and gauges but no hand brake.Historic - Victorian Railways Narrow Gauge - Passenger Rolling Stock: NB Passenger carriage Passenger carriage 24NB - Carriage (NB 2nd series 6 compartments), Timber body on a steel frame 24NBpuffing billy, 24nb, nb passenger carriage, 2'6" guage, victorian railways, narrow gauge passenger rolling stock

51 NBH - Excursion Car for wheelchairs - specially built for Wheelchair access allowing it to carry 24 passengers or 20 passengers and 3 wheelchairs, or 16 passengers & 6 wheelchairs Puffing Billy Service History or Notes Coupled Length 31 feet 4 inches (9550 mm) Width 6 feet 3 inches (1905 mm) Height 9 feet 2 inches (2794 mm) Weight 8 tons Capacity 24 passengers, or 20 passengers and 3 wheelchairs, or 16 passengers and 6 wheelchairs Number Built 2 In use 2 In 1981 the first of two extended NBHs with provision for wheelchair passengers (double door access and fold-up seats) was built, the second following in 1983. These were numbered 51 & 52 - a separate number series because of their length made them different from the other NBHs. May 2016 - In for repairs to the roofHistoric - Puffing Billy Railway Narrow Gauge - Passenger Rolling Stock: Excursion Car specially built for Wheelchairs access51 NBH - Excursion Car for wheelchairs - specially built for Wheelchair access allowing it to carry 24 passengers or 20 passengers and 3 wheelchairs, or 16 passengers & 6 wheelchairs made of wrought iron and timber 51NBH

11NBHC Passenger Carriage - Excursion Car and Guard's Van Excursion Car 11 NBH which has been converted by the addition of a Guard's Van compartment by Puffing Billy Railway and re classed & numbered 11 NBHC The NBHC is a conversion from the standard NBH. This was a temporary, but long term, conversion to overcome lack of suitable guard's vans on the Puffing Billy railway. One end of a standard NBH had windows and a hand brake fitted. A padded seat replaced the standard back to back seating, and a partition separated the guard from the passenger compartment. VR Service History *NBH 11.VA - 8/12/1919 NWS Built new - / 1/1929 - Modified AC Malco BO circa 1955 - Condemned - Puffing Billy Service History or Notes Body Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Height 9 feet 2 inches (2794 mm) Weight 8 tons Capacity 22 passengers Number Built 1 In use 1 Historic - Victorian Railways Narrow Gauge - Passenger Rolling Stock: Passenger Carriage - Excursion Car 11 NBH which has been converted by the addition of a Guard's Van compartment by Puffing Billy Railway and re classed & numbered 11 NBHC 11 NBHC - Passenger Carriage - Excursion Car and Guard's Van made of wrought iron and timber11NBHCpuffing billy, pbr, rolling stock , 11 nbhc, victorian railways, passenger carriage - excursion car and guard's van, 11nbh

Set of 9 replica destination rolls produced by the AETA, mid-1960s to give details of each destination roll of Sydney tram or trolley buses. 1 - Western suburbs - AETA No 1 - 1250mm long 2 - Eastern suburbs - AETA No. 2 - 1150mm long 3 - North Sydney - Manly - AETA No. 3 - 1040mm long 4 - Watsons Bay - AETA No. 4 - 700mm long 5 - Newcastle - AETA No. 5 - 620mm long 6 - Enfield Depot - AETA No. 6 - 363mm long 7 - Wylde St Trolley Bus AETA No. 8 - 112mm long x 71mm wide 8 - Kogarah Trolley bus - AETA No. 9 - 305mm long x 71 mm wide 9 - North Sydney - Manly AETA No. 12 - 690mm long x 50mm wide 10 - Eastern Suburbs - AETA No. 14 - 770mm long x 50mm wide 11 - Western Suburbs - AETA No. 16 - 1270 long x 50mm wide 12 - North Sydney / Manly side - AETA No.17 - 519mm long x 80mm wide 13 - Western Suburbs side - AETA No. 18 - 665mm long x 80mm wide 14 - Watsons Bay - AETA No. 20 - 1160mm long x 48mm wide 15 - Eastern Suburbs - AETA No. 21 - 11540mm long x 48mm wide 16 - North Sydney - AETA No. 22 - 750mm long x 48mm wide 17 - Eastern Suburbs Side - AETA No. 23 - 523mm long x 87mm wide The envelope in which they were received by the donor - preprinted for the Electric Traction magazine with a 2/5d stamp, Registered mail has been retained. Date stamped 30 Aug. 1965. Yields information about Sydney tramcar and trolley bus destination rolls.Set of 18 paper rolls of varying length, printed and joined by glueing.tramways, destination rolls, sydney, aeta, destination roll, buses, trolley buses

NBD This is a Puffing Billy Railway reclassification of the first series of NB carriages. COMBINED NB PASSENGER CAR AND GUARD'S VAN. A saloon or end platform NB which has had a guard's compartment temporarily added in one end. Due to the temporary nature of this conversion, this vehicle also retains its original number in the NB numbering sequence but is classed NBD to differentiate it from the standard NBC and the NAC. The use of the letter 'D' in the classification is recognising the code for guard's vans prior to 1910. NB Class - Number Built (1st Series) 6 - Number Built (2nd Series) 17 - Number Built (3rd Series) 4 NB (1st series) NB 5 was equipped with a vertical hand brake at one end to enable it to be used as the last vehicle of a train. Body Length 20 feet 6 inches ( 6248 mm) Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Height 9 feet 5 inches (2870 mm) Weight 8 tons Capacity 16 passengers Built 1898 - 1904 Number Built 6 In use NBD 1, 2, 5 NB - Puffing Billy Railway classed these as NBD to indicate their use as a trailing vehicle with guard's accommodation. 5 NBD Victorian Railways Service History NBB 5. ( it's original number ) Built new - - / 6/1901 Newport Workshops 4/ 2/1902 - In Service "Commenced running" circa 1910 - renumbered To NB 5 *NB 5. - / 6/1926 - Modified AC Malco 5/ 2/1951 - Scrapped - Body and underframe purchased by Puffing Billy Preservation Society from Pakenham. Restored by the Puffing Billy Preservation Society 1975. In July 2006 work commenced on 5 NB to make it a temporary kitchen car for the luncheon/dinner train. It has had the seating removed from the saloon and kitchen equipment installed. Plans are for a kitchen car to be constructed and 5 NB restored to carry passengers.Historic - Victorian Railways Narrow Gauge - Passenger Rolling Stock: Passenger and Guard's Van carriage 5 NBD - converted into Catering Car and Guards vanMade of Timber and steel 5NBDvictorian railways, narrow gauge rolling stock, 5nbd - catering car and van, puffing billy

NB Class - Number Built (1st Series) 6 - Number Built (2nd Series) 17 - Number Built (3rd Series) 4 6 NB - Saloon carriage (24) Body Length 20 feet 6 inches ( 6248 mm) Vehicle Length 25 feet 2 inches ( 7671 mm) Coupled Length 27 feet 4 inches (8330 mm) Width 6 feet 3 inches (1905 mm) Height 9 feet 5 inches (2870 mm) Weight 8 tons Capacity 16 passengers Built 1898 - 1904 Number Built 6 In use NB 1. NBD 2, 5 Awaiting restoration NB 6 VR Service History NBB 6.VA - 22/ 8/1904 NWS Built new - circa 1910 - To NB 6.VA - *NB 6.VA - / 4/1926 - Modified AC Malco 4/ 3/1938 - Scrapped - Puffing Billy Service History or Notes NB (first series) NB - There were three types: -Nos. 1-6 were Saloon cars having end platforms and a ladies toilet, and were built from 1899-1904. Nos. 7-23 were 5-compartment side loading cars, built from 1906-1915. Nos. 24-27 were the former NAB class cars mentioned previously and were also side loading, having 6 compartments and two ladies toilets. Rescued by the Puffing Billy Preservation Society from Ocean Grove Victorian in Nov 2010 Nov 2010 Two carriages have been rescued from Ocean Grove where they had been built into a house. They are now at Emerald, one being a platform NB carriage and the other a swing door NB carriage. Storage of these vehicles is being considered. Many people were involved in the move: thanks go to Raymond and Thelma Cotter for providing tarps to protect the cars from the elements. Dec 2010 Two carriages rescued from Ocean Grove are now at Emerald, one being a platform NB car (6NB) and the other a 2nd Class swing door carriage. Minor refurbishment has taken place along with covering with Tarpaulins.Historic - Victorian Railways Narrow Gauge - Passenger Rolling Stock: Saloon carriagePassenger Rolling Stock: Saloon carriage 6NB - Made of Timber. 6 NBpuffing billy railway, pbr, rolling stock , 6 nb, puffing billy, 6nb, saloon carriage, victorian railways, narrow gauge passenger rolling stock, 2'6" guage

Nimons Bridge was built in 1890, as part of the then Ballarat-Linton railway. The bridge is 17 spans with tall timber piers of four driven piles each, with triple sets of diagonal cross-bracing and walers and a single row of longitudinal horizontal bracing between piers. The spans are of a uniform twenty feet (6.1 metres), originally supported by four 21-inch x 9-inch (535 mm x 230 mm) Kauri timber beams per span, following the standard V.R. design of the period. When the superstructure was rebuilt after the 1953 fire, the timber beams were replaced with two 24-inch (610mm) deep rolled-steel-joists on each span. These are marked 'Lancashire Steel Co., Scotland' and are believed to have been second-hand. The deck of transverse-timber planks is 103.6 metres in length. Overall the bridge has an impressive appearance with its exceptionally tall triple-cross-braced piers creating a 'three-tiered' effect, with the deck 19.2 metres above the Woady Yaloak River. The Ballarat-Skipton line closed in 1985. Nimons Bridge has been recently restored, as part of the Ballarat-Skipton Rail Trail. How is it significant? Nimons Bridge is significant for technical, historic and aesthetic reasons at a State level. Why is it significant? Nimons Bridge is technically significant as Victoria's fourth-tallest timber trestle bridge when built, and as the third-tallest surviving example. It is also the second-largest composite bridge combining traditional timber piers with RSJ spans and a timber deck and falls within a select group of fewer than ten timber railway bridges with horizontal longitudinal bracing between the piers and three sets of double cross-bracing on its tallest piers, creating a visually striking 'three tiered' effect that enhances its viaduct form. Nimons Bridge is historically significant as having served initially the mining community at Linton, then the Western District agricultural area and in later years a kaolin quarry at Pittong. Nimons Bridge is historically significant as a representative of the 'light' branch line methodology that stimulated the explosion of railway construction in Victoria during the 1880s, and provides an interesting contrast with the more solid and vastly more expensive railway viaducts built in similar terrain on Victorian main lines, at Moorabool and Taradale, in the late 1850s. Approached by a deep cutting and high embankment at either end, the bridge represents a very cost-effective late 19th century engineering solution to the characteristic physiography of western Victoria with flat basalt plains intersected by deep wide valleys occasionally subject to severe flooding. Nimons Bridge is aesthetically significant for its visually impressive viaduct form, crossing a deep and steep-sided valley that is part of a rich cultural landscape. Within close proximity of the bridge are mullock dumps, tailings, shaft sites and other relics of the deep-lead alluvial mining era. The bridge is the most visually spectacular timber-trestle rail bridge in Western Victoria and is among the most spectacular timber-trestle rail bridges surviving anywhere in Victoria. It is part of the Ballarat-Skipton Rail Trail. Classified by the National Trust :02/10/2000 (http://vhd.heritagecouncil.vic.gov.au/places/67986)Colour photograph of a log bridge known as Nimon's Bridge.ballarat-linton, nimons bridge, nimon's bridge, log bridge, viaduct, timber-trestle rail bridge

This is a set of twenty photographs of the Army Survey Regiment undertaking regimental training in state forest north of Costerfield, Victoria, 1995. The state forest is now part of the Heathcote-Graytown National Park. The aim of the training was to provide personnel practical revision of infantry and minor tactics at the section level, navigation and map reading, RATEL and Survival in the Field. This was the Army Survey Regiment’s last military skills field training exercise before disbandment of RA Svy and the weather on the last day was wet and cold. It provided soldiers who decided to continue their military service essential military skills revision and for those who chose to discharge from the Army, it reinforced their decision to leave. LTCOL Duncan Burns was the last CO of the Army Survey Regiment from 1994 to 1996 and WO1 Ken Johnston OAM MM from RA Inf was the RSM for one year in 1995.This is a set of twenty photographs of the Army Survey Regiment undertaking regimental training in state forest north of Costerfield, Victoria, 1995. The photographs were printed on photographic paper and are part of the Army Survey Regiment’s Collection. The photographs were scanned at 300 dpi. .1) - Photo, colour, 1995, unidentified personnel. .2) - Photo, colour, 1995, L to R: Derek Percival, Damien Cole, unidentified. .3) - Photo, colour, 1995, L to R: unidentified, Chris ‘Charlie’ Brown, unidentified (x2). .4) - Photo, colour, 1995, unidentified personnel. .5) - Photo, colour, 1995, unidentified. .6) - Photo, colour, 1995, unidentified personnel. .7) - Photo, colour, 1995, unidentified personnel. .8) - Photo, colour, 1995, L to R: Jim Ash, Syd Anstee, unidentified, Rob Bogumil. .9) & 10) - Photo, colour, 1995, L to R: Steve Hill OAM CSM, Rob Bogumil, Brian Paul, Jim Ash, Syd Anstee, Colin Davidson. .11) - Photo, colour, 1995, L to R: Paul ‘Hutch’ Hunter, Stu Ridge, Chris ‘Charlie’ Brown. .12) - Photo, colour, 1995, RSM WO1 Ken Johnston OAM MM. .13) - Photo, colour, 1995, Peter Imeson. .14) - Photo, colour, 1995, L to R: Stu Ridge, Alan Virtue. .15) - Photo, colour, 1995, CO LTCOL Duncan Burns. .16) - Photo, colour, 1995, unidentified personnel. .17) - Photo, colour, 1995, L to R: Tony Harder, CAPT Sutiman (Indonesian Exchange Officer), Kasey ‘Tiges’ Northausen, unidentified (x2), Mick Duggan. .18) - Photo, colour, 1995, CAPT Sutiman (Indonesian Exchange Officer). .19) & 20) - Photo, colour, 1995, unidentified personnel..1P to .20P – No personnel are identified.royal australian survey corps, rasvy, army survey regiment, army svy regt, fortuna, asr