This anchor with chain was dredged from Warrnambool's Breakwater area in Lady Bay during a dredging operation around the 1980s. The anchor only has one fluke instead of the usual two and this is likely to mean that it was used as a boat's mooring anchor.This anchor is an example of the type of mooring equipment used during the 20th century in Lady Bay. It is part of the local maritime history.Anchor, one fluke, with length of heavy chain attached to the shank.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, anchor, chain, anchor and chain, one fluke, mooring anchor, single fluke anchor, dredge, lady bay, breakwater, maritme, marine

This jacket appears to be part of the uniform, connected to Warrnambool through its sleeve labels, and to the sea, through its anchor and chain buttons. It may have been worn in the merchant navy by a senior seaman, due to the good quality of fabric and the double-breasted design, or to life saving at sea, such as a member of the Life Saving Rescue Crew, or even a Harbour Master. This jacket has been used for display on the ketch 'Reginald M', built in 1922 in South Australia and spending the final years of its life at Flagstaff Hill Maritime Village from 1975-2016. The vessel spent much of its working life as a coastal trader along the south-eastern coast of Australia.This maritime jacket is significant for its connection with Warrnambool and to maritime service. Its high quality wool suggests that it was made for a senior ranking person. This jacket could have been used by a seaman in the merchant navy, which provided the essential service of transportation of goods and passengers between the ports of south-eastern Australia, including the Port of Warrnambool.Uniform jacket or coat, maritime. Heavy duty navy-coloured woollen jacket lined with light-weight woollen lining coloured blue with thin white stripe. Double-breasted front with eight buttons with the motif of anchor and chain. Two waist pockets on the outside, two breast pockets on the inside, closed with composition buttons on the lap, plus one spare button. Dark felt fabric labels were stitched to each sleeve just below the shoulder, with gold embroidered letters. Embroidered sleeve labels "WARRNAMBOOL" Embossed on eight buttons, symbol [chain joined to top of anchor and entwined around it, with text on anchor's crossbar]flagstaff hill, warrnambool, maritime village, maritime museum, flagstaff hill maritime museum & village, shipwreck coast, great ocean road, meritime uniform, men's jacket, woollen jacket, double-breasted jacket, merchant navy, maritime uniform jacket, anchor and chain buttons

This Kenter type , chain joining link or shackle would commonly be used with anchor chain in the marine industry for applications such as anchors, moorings and ballast. It is a versatile link that can be opened and closed by removing and re-inserting the taper pin and lead plug, allowing for easy joining and detaching lengths of chain, and for repairing damaged links in chain.Chain joining shackle or joining link, Kenter type , used as a marine anchor chain link. The oval shaped loop of thick metal and central metal chock comprises three pieces; two half oval pieces with shaped ends. The pieces are joined by a taper pin diagonally through holes in each piece, then fixed firmly by a lead plug in a hole near the head of the pin. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shackle, chain joining shackle, joining link, anchor chain joining link, marine chain joining link, kenter type chain joining link, marine hardware

A shackle is a U shaped piece of iron closed with a pin across the jaws. It is used for securing anchors to their cables, joining lengths of chain cables and so on. This type of shackle is the same size and shape as an ordinary link of the cable and fits into the snugs of the cable holder when verring or weighing. This Kenter type, chain joining link or shackle would commonly be used with anchor chain in the marine industry for applications such as anchors, moorings and ballast. It is a versatile link that can be opened and closed by removing and re-inserting the taper pin and lead plug, allowing for easy joining and detaching lengths of chain, and for repairing damaged links in chain.This is an example of ship's maritime hardware used in Victoria in the 19500s.Half of a chain joining shackle or joining link, Kenter type , painted blue. Often used as a marine anchor chain link. A complete shackle would comprise an oval shaped loop of thick metal and central metal chock comprises three pieces; two half oval pieces with shaped ends. The pieces are joined by a taper pin diagonally through holes in each piece, then fixed firmly by a lead plug in a hole near the head of the pin. This object is missing its other half, plus the chock and the tapered locking pin.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shackle, joining link, chain joining shackle, anchor chain joining link, marine chain joining link, kenter type chain joining link, marine hardware, kenter chain joining shackle

This Trotman’s pattern stock anchor is the southernmost anchor on display at Flagstaff Hill’s Anchor Graveyard. This large Trotman design anchor was patented in 1852 by John Trotman and was widely used on merchant ships. On April 15th 2001 around midday this anchor was raised from the seabed of Lady Bay, Warrnambool, by the crew from Birdon Dredging, who had been hired to dredge the Harbour. The spokesperson Steve Walker, who worked for the firm, said that the anchor and long chain were found after the chain became tangled in the cutter blade of the dredging equipment. The anchor was lifted from the water and onto the Breakwater then a front-end loader placed it onto a truck that then delivered it to Flagstaff Hill Maritime Museum & Village. Howard Nichol, Museum Manager at the time, had estimated the anchor to be up to 130 years old. The previous Museum Manager, Peter Ronald, who was also a diver, had identified the anchor as a Trotman’s type and similar to those used on some of the major wrecks in the region. According to Nicholl, Museum staff believed it was possible that the anchor is one of two used as a mooring line that had been used to catch driving vessels and prevent ships from washing aground on the sand bar. The mooring line was shown as a dotted line on the 1890 chart of Lady Bay, approved by Lieutenant Stanley of the British Admiralty. by Lieutenant Stanley [British Admiralty]. The location of the anchor corresponds to a point on that map and the length of the chain supports that theory. “The map is quite a detailed survey of the Bay and it shows two anchors with buoys on the ends with probably about 100 yards of chain stretched between them. The ships would drop anchor and was the chain as a snag because this was a treacherous bay before the Breakwater was built and this was a way to eliminate that problem, "said Nichol. The mooring chain was put in place to catch drifting vessels during wild stormy weather. It was identified. ABOUT TROTMAN’S ANCHORS- The British Admiralty wanted an anchor design that had more holding power. The Committee of 1852 on Anchors was appointed to assess and report on the qualities of various anchors including Trotman’s anchors. Trotman’s pattern anchor received the highest score. The anchor is similar to the Admiral’s design but features arms that pivot when the anchor settles and the upper fluke moves to rest against the shank. The anchor then sits lower, which in turn greatly reduces the chances of the anchor’s chain, cable or rope getting tangled. The top of the shank has a fitting that allows a quick release of the anchor’s chain if this becomes necessary. This Trotman’s anchor is significant as a part of the maritime history of the Port of Warrnambool regardless of whether it belonged to one of the 29 ships that were stranded or wrecked in Lady Bay. The anchor is connected to the many attempts to maintain Warrnambool as a safe and manageable port, including the various plans for the construction of the Breakwater.Anchor: an iron Trotman’s pattern style with a rectangular-section shank that is wider in the middle and has a base that extends on two opposite sides in a ‘fork prong’ manner. A crescent-shaped, double-ended arm is fitted into the base of the shank with a bolt, enabling it to pivot. Each arm has a fluke in the shape of an upward palm with an attached metal plate that forms a horn at the back of the palm. A long, round-section pipe is fitted to the top of the shank at 90 degrees to the arms; one side has an elbow bend parallel to the arms, and both ends have an attached metal sphere. The pivoting ring at the top of the shank can be lifted for a quick release of the chain.flagstaff hill, warrnambool, maritime village, maritime museum, shipwreck coast, great ocean road, anchor, mooring, trotman, lady bay, breakwater, admiralty, ship equipment, stock anchor, john trotman, 1852 patent, 2001, birdon dredging, steve walker, howard nichol, peter ronald, british admiralty, lieutenant stanley, committee of 1852 on anchors

A general purpose chain slip for holding the anchor.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Joining Shackle metal painted white. Part of an anchor chainflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Channel Buoy anchor chain Bow Shackle. Painted white. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Kentor or Pinless, Naval or Patent anchor chain shackle. Metal painted white.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, kentor or pinless, kentor, pinless, shackle

Cap badges worn on naval umiforms by Captain William Robertson. Captain of the s.s.Casino2 hat badges decorated with laurel leaves, anchor and chain red velvet crownThe number 65 on stick-on label at back of B(2)local history, hat accessories, s.s.casino, captain william robertson, port fairy naval reserves, boxer rebellion, costume accessories

Wooden plaque with Cast Circle attached to front.Cast Circle with -Naval Association Of Australia" Crown on top and Anchor with Chain in centre of circle., "Port Adelaide" underneath circle.

Badge issued to all Military Personnel who have returned from Active Service.Small black badge on mounting plinth. Rough diamond shape. Crown on top of Rising Sun Emblem with anchor and chain below it. Engraving at bottom.Inscribed with "Returned from Active Service".badge, returned from active service, ww2

A gold tie pin with anchor chain for City of Moorabbin, Victoria with MCC Coat of Arms in a Presentation clear plastic box with blue felt liningCITY OF MOORABBIN VICTORIA / Coat of Arms

Items souvenired by Frederick Ernest ADDLEM VX142253. Refer Cat No 432.2 for his service history and 937P. .1) Badge, Japanese, Metal, Rectangular shape with crossed swords, Anchor and chain, centre is a brass star. Rear has Japanese writing and pin clasp .2) Same as abovenumismatics -badges - military, japan

The badge:-Rising sun with crown and anchor and chain. To qualify for this badge member must have seen active service overseas. Between 3rd September 1939 & 2nd September 1945.The badge is inscribed with "Returned From Active Service."

These cotton reels are an example of an item not as commonly manufactured today. Cotton reels are now generally made of plastic.Thirty-four wooden cotton reels strung together. They are assorted sizes and coloured ; black, natural and brown. There are various labels: COATES, ANCHOR, SYLKO (DEWHURST), BONDS,MILLER CHAIN, PEARSALL, CARLSON.

Historical Information: The anchor is from the wooden sailing ship CHILDREN, which was wrecked at Childers Cove east of Warrnambool on the 15th of January 1839 with the loss of 16 lives. The Children anchor was raised from the wreck site by Flagstaff Hill Divers; Peter Ronald, Garry Hayden (Terang, still), Tim Goodall (now Warrnambool), and Colin Goodall (now Warrnambool), on Sunday 3rd January 1974. A week or so later it was dragged up the cliffs and taken to Warrnambool. It is now on display near the entrance to the Maritime Village and Museum. It appears to be a Pering’s Improved Anchor, developed at Portsmouth after 1813. The addition of broad curvature to the anchor arms provided a stronger purchase than the pre-existing Admiralty Old Pattern Long Shanked Anchor with straight arms. However, the evidence of hammer-welding the separate pieces of the arms and palms to the central shank (peaked crown and flat palms) suggests the manufacture is before the 1831 Rodger’s Anchor design, (which cast both arms and their flukes as one piece that was then attached to the shank by a bolt through the crown). This identification seems consistent with the date of the CHILDREN’s construction in 1824. The CHILDREN was a three masted barque with a wooden hull built at Liverpool in England. She was bought by the Henty family of Portland (Australia Felix) in 1837 for regular coastal trading between Van Diemens Land, the Port Phillip District of New South Wales and South Australia. Only 255 tons burden (92 feet in length, with a beam of 25 feet and depth of 17 feet), she sailed from Launceston bound for Adelaide in late December1838, on her first Australian voyage and under the English master who had brought her out – Captain H. Browne. On board the CHILDREN were 24 passengers, including 9 children; the captain and 14 crew; livestock of 1500 sheep, 8 bullocks and 7 horses; general cargo of beef, pork, tobacco, tripe, butter, limejuice, horse hair, currants, lead shot, beer and spirits; 5,000 house bricks from London; and six whaling boats with associated whaling gear. The vessel was battered by gale force north-westerly winds shortly after setting out from Launceston on 11 January 1839 and adverse sailing conditions persisted for the next four days. At 11 pm on the 15th of January 1839, and many miles north and east of the captain’s navigated position, the CHILDREN struck the Pinnacle, a limestone stack off Childers Cove. Within half an hour the ship was completely destroyed. As well as the loss of livestock and cargo, 16 passengers and crew perished, including the captain, six men, one woman and eight children. In 1931 shifting sands at Childers Cove uncovered the skeleton of an adult male. In 1951 another two skeletons were exposed by storms, an adult male and a child. In 1963 some district scuba divers retrieved a small signal-cannon from the site. And in 1974 Flagstaff Hill recovered the anchor and some house bricks. The shipwreck of the CHILDREN is of state significance – Victorian Heritage Register No. S116.A large forged-wrought iron anchor from the wreck of the CHILDREN. Flat hammer-welded flukes on opposing curved arms and a peaked crown. It has a metal (elbowed) stock or cross-bar and a heavy duty pinned shackle (not ring) for the anchor chain. It is in fair condition but extensively corroded after 135 years on seabed (supported on display) .warrnambool, shipwreck coast, flagstaff hill, shipwrecked coast, flagstaff hill maritime village, flagstaff hill maritime museum, shipwreck artefact, maritime museum, the children, childers cove, anchor, pering’s improved anchor, 1839 shipwreck.

The Bell was presented to the Mission by the Aberdeen and Commonwealth Line in October 1957, after the ship made her final voyage to Australia in 1956 and it was broken up in Barrow in April 1957 by Thomas W Ward (UK). In the Annual Report 1957, Padre Oliver mentioned "the bell was found unsuited for the chapel belfry, it is to be mounted on a bracket and placed in the Celia Little lounge."Cast brass bell with wrought iron anchor and hook design wall mount: decoratively plaited cord in maritime knot pattern to resemble chain, sealed with a varnish and attached to cast iron clapper. Wrought iron hook secured by metal bolt. Bell is inscribed in upper case capital letters with MORETON BAY. Anchor attached with four flat headed hexagonal bolts with mighted wooden frame. Bell inscribed with upper case capital letters MORETON BAY. / Also brass presentation wall plaque (see image)bell, anchor, brass, ss moreton bay, ship's bell, plaque, celia little room, bracket, p&o, peninsular and oriental steam navigation company, passengers liners, passenger ships, emigrants, emigration

This certificate was awarded to news photographer Denis Gibbons to mark his time on USS New Jersey BB62. Gibbons spent 5 years in Vietnam, and photographed the tours of nine Australian infantry battalions for Fairfax press and United Press International. This is a non-official certificate signed by the commanding officer Edward Snyder Jnr.Paper with hard cardboard backing of under water scene-white with blue and gold writing. Banner heading in gold writing. Picture of a battleship top LHS, mermaids x2 holding a painters pallet, Anchor with chain. Emblem of battleship bottom RHS. Swordfish and sharks depicted.Battleship Brethren heading. USS New Jersey BB 62 Firepower for Freedom. Denis Gibbonsdenis gibbons, battleship brethren, march 1969, crewmember certificate, uss new jersey, gibbons, honorary certificate, us navy

In about 1820 Henry Pershouse Parkes, from Dudley, established the Tipton Green Chain and Anchor Works (Staffordshire). The firm’s products included cables, chains, anchors and all kinds of forgings. In 1851 some tests were carried out on the company’s chains to demonstrate the tensile strength and fibrous toughness of the iron used in their production. The iron used on this occasion was supplied by Summer Hill Iron Works. Some of the chains were exhibited at the Great Exhibition in 1851 and also at the 1855 French Exhibition in Paris, where they won a prize medal. Henry Pershouse Parkes died in 1867 and appears to have been succeeded by his son, who had the same name. In 1867 the firm produced the largest anchor in the world, at that time. It was built for Brunel’s S. S. Great Eastern to the patented design of Joseph Beterley, of Liverpool. The anchor, which weighed eight tons was twenty six and a half feet long and cast from iron supplied by Bloomfield Iron Works. It was tested at Tipton Proving House and found to be able to stand a strain of 100 tons. Henry Pershouse Parkes junior went into partnership with Alexander Stewart Ross to form Henry P. Parkes and Ross. The partnership came to an end in 1885 and the company became Henry P. Parkes & Company. In 1904 the business was sold and became H. P. Parkes and Company, under the control of N. Hingley & Sons Limited, of Netherton. In 1944 the company’s name was changed to Richard Sykes and Son Limited, then in 1947 it became H. P. Parkes & Company Limited. The business went into liquidation in 1966.The item is significant as an early example of a well known prize winning British anchor and chain maker from the mid 19th century. The company name on the anchor indicate the period of manufacture making it a significant item prized today by collectors.Anchor 5 pronged metal with loop at bottom to attach anti-snag rope. Long shank painted black. Label attached "Henry P Parker and Co"flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, five pronged anchor, henry p parkes & co, tipton green chain and anchor works

Merchant Navy medallion with ‘MN” in front of an anchor and circled by a chain. On its verso it depicts a crown flanked by two fish creatures. The words ‘Merchant Naval Service’ is at the top. The medallion is silver coloured and has a ribbon with blue, red, white and green. The ribbon has an intact copper based pin attached to its verso.Verso: Merchant Naval Service Recto: MN

The Port of Melbourne was leased to private operators post 2015, State Govt remains landowner and regulatory authority. The Company of Master Mariners continues a regular association with the Mission to Seafarers regularly holding events and meetings on the premises.The Port of Melbourne insignia on this desk lectern may well be replaced in subsequent decades. The desk is used for presentations at many events.Wood cabinetry desk lectern with sloped reading surface and bearing two wooden shield mounted insignia, one above the other. Uppermost Insignia a) features a crest supported by 2 flanking seahorses and shield with victorian flag and 2 enamelled ribbons with inscription. Insignia B features circular crest with a 'coronet' of sail and galleon surmounting a ropework crest with an Anchor and chain at the centre.Insignia a) "PROSPERITY THROUGH SERVICE" / PORT OF MELBOURNE Insignia b) COMPANY OF MASTER MARINERS On inner panel of lectern in gilt lettering "Company of / Master Mariners "master mariners, the port of melbourne, mission to seafarers

Philip Webley was born in 1813, he was the younger brother of James Webley who was born in 1807. Both were born in Birmingham. Towards the end of the 1800s, the firm claimed establishment in 1790, this must have been the date James and Philip's father or grandfather originally established a bullet or gun implement making business. It was not, as is often stated, the date William Davis established his business. Philip Webley was apprenticed in 1827 to Benjamin Watson. James Webley also seems to have been apprenticed but to who is not known. In 1834 James and Philip established their partnership as percussioners, lock filers and gun makers at 7 Weaman Street,Birmingham which was William Davis' old premises Davis, a gun implement maker, mould and toolmaker, died in 1831 and his wife Sarah inherited the business at 84 Weaman Street which she ran with her daughter, Caroline. On 5 January 1838 Philip Webley married Caroline. Philip was recorded at 84 Weaman Street from 1838 as a gun percussioner, lock filer and gun maker and this is when the partnership was last recorded, but the brothers apparently continued to co-operate until 1845 when Philip reportedly sold his interest to James and used the money to purchase Sarah Davis' business. Even then, they worked together particularly about the design and manufacture of percussion revolvers. Philip Webley was recorded in the 1851 census as a 38-year-old gun and pistol implement manufacturer living at 84 Weaman Street with his wife Caroline they had four sons and one daughter Thomas William, Emma, and Philip Jnr, and two other sons, James, and Henry and Philip's cousin, also lived with the family probably as a nurse, Sarah Haywood. On 4 February 1853 Philip Webley registered patent No. 335 for a hinged revolver and on 14 September 1853 he registered patent No. 2127 for improvement for the first muzzle-loading percussion cap and ball revolver which became known as the "Longspur". In 1859 Philips son Thomas William, aged 21, was made a partner in the firm, which then changed its name to P Webley & Son and described itself as "Gun and Pistol Makers and Patent Revolving Pistol Makers", probably exploiting Philip Webley's patent No. 305 of February 1853 for a revolver frame and lock, and its improvement under patent No. 2127 of September 1853. Thomas later went on to managed the shotgun side of the business. From about 1863 up to the First World War, the firm made rook rifles for Holland & Holland. From the 1890s they supplied magazine rifles. In 1863 and 1864 the firm's address was given as 83-84 Weaman Street, but from late 1864 to 1875 their address was 84 Weaman Street. By 1874 the firm had a showroom in London at an unknown address. In 1875 the firm expanded into 82-84 and 88-89 Weaman Street. The shotgun is not in very good condition is unusable as a firearm and is not very significant historically or valuable, although made by a well known and respected manufacturer of firearms there are many better examples of shotguns made by P Webley and Son in collections and for sale. This particular example is of a standard pattern for utilitarian use of which many were made. Pin fire double barrel cartridge loading shotgun, the stock is of varnished walnut, the shotgun is in a wooden box, box has hinged lid and dovetail joints. Raised inscription on butt has an image of "dog carrying a bird in his mouth" and another image of a "anchor and chain". Inscribed to both sides of the locks "P Webley and Son", Maker's mark and proof marks for black powder shotguns on undersides of both barrels. Proof marks used are for Birmingham. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shotgun double barrel, double barrel, bird dog and bird, anchor and chain, webley & scott, pin fire, cartridge, philip webley

Model of the ship served on by W Thomson during WWII.Scale model of the HMAS Maryborough that was operated by the Australian Navy during WWII.Grey and black painted plastic and wood scale model of the Bathurst class HMAS Maryborough (1940 to 1946) minesweeper (commonly known as corvettes) mounted in a wooden frame glass sided and top case. It has cotton rigging with metal anchor chains. An inscribed metal plate is located on the front glass side. The upper of the model is painted grey, and the bottom black. J195 is painted in black lettering on the bow of the model.J195 H.M.A.S Maryborough 1940 - 1946 Made by W. Thomsonmodel, hmas maryborough, bathurst class, minesweeper, corvette

The pulley block illustrates a moment in Harcourt history. According to the reminiscences of William Sanders the granite block for the Burke and Wills monument was of such weight that, in hauling it from the quarry, the weight split the yokes and snapped the chains of the bullock team employed in the task. "So Mr Blight got ropes and tackle, as, as there were plenty of trees along the route, they served as anchors to attach the ropes" Thus, with pulleys such as this, Joseph Blight moved the monolith, at snail's pace, to the Harcourt railway station in 1864.The object is significant for its connection with the explorers Burke & Wills and the foundation of the granite industry on Mount AlexanderA wooden pulley block designed for two ropes. Used for lifting heavy objects. A rope slung around the pulley block fixed the device to the rafters of the shed. Ropes were threaded over the pulley and used to lift heavy weights. Use of a pulley halves the effort required to lift or move an object. Possibly of nautical origin but applied to workshop use in later years.

This grappling hook is constructed from two U-shaped lengths of steel pipe, each pinched together in the centre of its arm then the ends spread apart and formed into points. The two pieces are joined with a length of heavy chain, with the end links closed to make the chain into a circle. the hook is usually attached to a rope, chain or pole of suitable length for the job undertaken. Another name for a grappling hook is a grapnel hook. Grappling hooks come in many shapes and sizes and have numerous uses. Some are carried on board vessels and used for pulling things on board or out of the sea, rescuing people from the sea, pulling other vessels closer and moving cargo. They may be used for dredging the seabed for submerged objects. A grapnel anchor can be used to moor or stabilise a vessel. The hook can be thrown out to catch on something, such as a clifftop, and then used for climbing. A form of a grappling hook, a grapnel, can be used for military purposes and is fired from a purpose-built gun or launcher. This grappling hook is an example of equipment used onboard a vessel for safety and functional purposes. Grappling hooks have been used through the centuries and their design has remained basically the same. Grappling hook with four pointed arms. The hook comprises two double-pronged grappling hooks on a chain joined to form a circle. Hooks are made from strong steel.flagstaff hill, maritime village, maritime museum, great ocean road, shipwreck coast, grappling hook, grapple, grapple anchor, marine tool, marine equipment