BHS CollectionBlack and white photo. 5 trams heading east along Mitchell Street, photographed crossing railways bridge to North of Bendigo Railway Station. Photo taken from railway station. People waiting for train on platform. Railways lines prominent in front of photo.basil miller, bendigo tramways, bendigo rail station, mitchell street rail bridge

Black and white photo, copy: image shows Bendigo Railway Station, steam locomotive on rail, no carriages. Buildings constructed of brick, large verandah extending length of platform. Large group of men standing on platform dressed in suits, hats.place, bendigo, bendigo railway station, bendigo, sandhurst, rail, railway station, steam locomotive

The wooden pedestrian bridge spanned the rail tracks at Sunbury Railway Station and were replaced with a more modern bridge and ramp when upgrades were done at the station and along the Bendigo line in the late 1990s and early 2000s. The water tank beyond the station building was used to refill the engines with water when steam engines were used. Diesel driven V Line trains now convey commuters from the regional towns along the Bendigo region to Melbourne.The Bendigo Line was the first government rail line to open and it reached Sunbury in 1859. It was extended to Bendigo and opened in 1861.A non-digital coloured photograph of a wooden pedestrian bridge spanning rail tracks with a wooden station building and former water tower on the station platform. rail bridges, bendigo rail line, sunbury station, water towers, railways

RAILWAYS COLLECTION paper - Booklet - Celebrating 150 years of Rail in Bendigo and the Bendigo Brass band RAILWAYS COLLECTION - Booklet - Celebrating 150 years of Rail in Bendigo 6.7.2012 A4 paper folded in 3 .Front shows an early photo of Bendigo rail station and a stem train -1860's - number 35 one page has a photo of the Bendigo city Band early 1900's.book, bendigo

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencybendigo, bendigo rail yard, bendigo railway station, george coop collection, victorian railways, w-311, wagon, workmens sleeper wagon

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencybendigo, bendigo rail yard, bendigo railway station, george coop collection, victorian railways, wagon, weighbridge test wagon

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencybendigo, bendigo rail yard, bendigo railway station, george coop collection, victorian railways, wagon, water tank wagon, wt-224

Digital TIFF file Scan of 35mm Ilford FP3 black and white negative transparencybendigo, bendigo rail yard, bendigo railway station, george coop collection, victorian railways, wagon, water tank wagon, wt-224

Bendigo tramways conditions of operation including fares for a range of trips.Modified agreement between the City of Bendigo, the Borough of Eaglehawk, and the Shire Council of Marong, and the Bendigo Tramway Company - for the operation of a tramways service on two routes (rail station to Eaglemark Town Hall and Kangaroo Flat to White Hills Botanic Gardens Six-page agreement, unsigned or sealed by five nominated parties. Document is generally in a fair condition, bound with a light cover and stapled

Korong Vale was a speck of a town with a population of just 238 people in 1981 and most of them would have been railway employees. It was the junction for the Sea Lake and Robinvale lines, during wheat season it was common to send relieving crews there to cope with the heavy traffic. Loaded wheat could be dispatched to either Bendigo where it would travel on to Melbourne and Geelong or it could go to Dunnoly, a large inland wheat storage facility. It had two signalboxes, (A box controlled 2 sets of interlocked gates), loco depot and 8 track marshalling yard as well as the usual goods shed, livestock loading facilities and weighbridge. Perusal of the signal diagrams (link above) will show the extent of the yard tracks. It all ended in 1983 when practically everything you see in the following photos was demolished. About the only structure now remaining is the water tank on the down side of the Vernon street level crossing.DVD. David Bernoth Rail photographs - Six Photos This item contains the following photos: 6847.2a Colour photo of two diesels Nos. 883 and 882 at a station 6847.2b Black and white photo of a sign at Korong Vale railway station. 6847.c Colour photo of Korong Vale A Signal Box and the level crossing gates 6847.2d Black and white photo of a loco van at Korong Vale 6847.2e Black and white photo of Workman's Vehicle at Korong Vale 6847.2f Black and white photo of the top front view of Engine 761bendigo, railways, david bernoth collection, korong vale

The Victorian Railways (VR) utilized a wide variety of steam locomotive classes across its broad-gauge network. Many of these workhorses were manufactured at the historic Newport Workshops.DVD. David Bernoth Rail photographs - 28 Photos This item contains the following photos: 8647.3b Colour photo of a steam engine passing the engine sheds at Bendigo 8647.3c Colour photo of engine number 709 at the Bendigo station 8647.3d Colour photo of engine R740 in the Bendigo Rail Yards, the Myrtle St bridge in the background 8647.3e Colour photo of engine R762 beside a water tank 8647.3f Colour photo of a steam engine passing the engine sheds at Bendigo 8647.3g Steam Engine No 769 with four open carriages and a goods van; on a country line; billowing smoke. 8647.3h Black and white photo of steam engine D685 at a station 8647.3i Black and white photo of steam engine K173 passing under a bridge 8647.3j Black and white photo of steam engine 517 at the Bendigo Station 8647.3k Black and white photo of J516 waiting for railcars to pass under the Myrtle St Bridge Bendigo 8647.3l Black and white photo of a steam locomotive goods train at a staion and the surrounding town shown 8647.3m Black and white photo of a steam locomotive No 709 passenger train passing through a pedestrian crossing 8647.3o Black and white photo of a steam locomotive No 707 passenger train 8647.3q Black and white photo of R704 passenger train 8647.3s R727 passes another steam engine - black and white photo 8647.3t Black and white photo of a steam engine good train 8647.3u Black and white photo of a steam engine passenger train 8647.3v Black and white photo of J506 goods train billowing smoke 8647.3w Black and white photo of D653 Steam Engine goods train 8647.3x Black and white photo of J 521 goods, possibly crossing the Murray river at Echuca 8647.3y Black and white photo of D656 goods, possibly crossing the Murray river at Echuca 8647.3z Black and white photo of two steam engines hauling a good train 8647.3aa Steam Engine No 677 with billowing smoke, coming into or exiting a siding. 8647.3bb Black and white photo of a steam engine beside a water tank with the driver of fireman on the steps of the engine 6847.3cc Black and white photo of a steam engine and its goods wagon pulled up at a station. Beside it is a horse and covered wagon 6847.3dd Colour photo of R727 (probably the Swan Hill Passenger Service) passing the Esso depot on Sandhurst Road, Bendigo 6847.3ee Colour photo of R761 in the Bendigo rail yards with coal loading carriages above bendigo, railways, david bernoth collection, locomotives

Black and white photograph showing two Locomotives, Diesel & steam, at Bendigo Railway Station, in a cream cardboard mount with caption reading Mr.L.Hogan Depot Foreman, Bendigo Loco from A.R.H.S. Victorian Division in grateful appreciation.transport, railways, trains, transport-rail-trains

Sandhurst Railway station opened in October 1862 and was renamed Bendigo in 1891. The current station was built in 1965 and has had extensive refurbishments since then, including in 1984 and 1988.Magazine publication with coloured photograph of Bendigo Railway Station on front and back cover. Contains 50 pages of biographies of those locomotive drivers who served in World War I. Also contains photographs of people, war service records, newspaper articles and buildings.Rail Tram ande Bus Union - Locomotive Division Victoria

Colour photo of orange coloured train at Bendigo Station. People lining along the crossover. Centre right background there is an orange coloured train engine.bendigo, history, regional rail link.

Aitken's Gap, otherwise known as The Gap or Buttlejork, and 3km west of Sunbury, was established as a township in 1845. It is in the area which is now bordered by the Calder Highway and Gap Road. The village was named after John Aitken, a Port Phillip pastoralist who took up the Mount Aitken run in 1836. Aitken's Gap Police Barracks (in the District of Bourke) opened in 1853 and was staffed by two Mounted Constables and one Foot Constable. The gaol (used to house prisoners and also gold en route to Melbourne) was built in 1857 from bluestone quarried in the area. The roof was made of slate. In 1861 it was staffed by 1 Mounted Senior Constable and 1 Foot Constable. The Barracks closed in 1863 when the Bendigo rail line was completed and the gold was transported to Melbourne by rail. All the buildings, except the gaol, were moved to Sunbury. The land was sold in 1870 and in 1989 the current owner donated the building to the Sunbury Police. The original building was dismantled, restored and rebuilt outside Sunbury police station.15 colour photos and 1 black and white photopolice stations; aitken's gap police station

Three unrelated Advertiser articles all dated 1/9/1984 stapled together- Simes (Symes?)family; Golden Square railway station; One Tree Hill. Simes family: Letter asking for help in assistance with information about the Simes family (1905-1924); Golden Square (railway) station buildings - some history of the building but article is about dilemma of old and 'not needed' buildings ''I wonder whether anybody want Golden Square/'' author - Andrew Ward, Bendigo Advertiser; article by John Hattam re the origin of the name ''One Tree Hill'' and history of the cutting down of The Tree (1879 - prosecution of a Jerry Ryan for vandalism); the road to the top being constructed (1892); lookout-tower constructions - the first being in 1894.document, newspaper, old rail stations, golden square rail station

Black and white photograph. Workshop with stream locomotive, lathes, work benches, driving belts. Seventeen men in work clothes. Inscriptions: on front - printed 'WH Robinson Photo Bendigo' On back - handwritten 'Bendigo Rail Shop', Circular stamp 'Royal Historical Society of Victoria, Bendigo Branch. History: James Lerk 21.9.2001 'Building near Gladstone Street, Bendigo at Bendigo Railway Station. Has large brick arches at the end'. Previous Acc. No MP225WH Robinson, Bendigoplace, building, commercial

Bendigo Advertiser "The way we were" from Tuesday, September 2, 2003. Tall Load: McCulloch carrying company employees take more than 50 bales of wool from Savernake station's merino sheep to the Yarrawonga rail terminal priior to shipment by rail to Melbourne, circa 1936.newspaper, bendigo advertiser, the way we were

Black and White Photo of the original Sandhurst Railway Station. Sandhurst Railway station is in the centre of the picture and a large goods shed, also in the centre of the picture is next to the station. Foreground of the picture is almost barren, except for the rail track, Markings on Rear of the picture are 'Sandhurst Railway Station' 'Holterman Collection 1876'buildings, railway station, sandhurst railway station, bendigo railway station, railway station

This is a picture of the railway station building which was built in c. 1865. The railway line was built from Bendigo to Echuca in 1864. The left wing of the present building has an additional floor to the original building. Refer page 62 of Susan Priestley's book. "Echuca; A Centenary History." The Building of the Echuca Railway station was very significant to life in Echuca. It made travel easier for residents, but also it helped develop Echuca as the largest inland port in the world. Traders brought wool and wheat down the Murray-Darling river basin to Echuca where it could then be sent by rail to Melbourne for shipping overseas, or to other ports around Australia. Rail became a very successful partnership in making Echuca Port's busiest year in 1872.A coloured rectangular photograph of the Echuca Railway station taken in 1979. There are three cars parked outside. A motorcycle is parked under the verandah, where two people are also sitting. In the foreground there are yellow flowering weeds.railways, echuca railway station., priestley, susan

The Sunshine rail disaster occurred on 20 April 1908 at the junction at Sunshine railway station (in Sunshine, Victoria, Australia) when a Melbourne-bound train from Bendigo collided with the rear of a train from Ballarat. 44 people were killed and over 400 injured, almost all of them from the Ballarat train, as the Bendigo train was cushioned by its two locomotives.Sunshine Railway Disaster Tom Rigg MS Word Files TR 28/2/08sunshine railway disaster, tom rigg

356.01 - Sunshine Rail Disaster Investigations - Detective Burvett 356.02 - Sunshine Rail Disaster Investigations - Comparing Notes At The Conclusion Of A Test 356.03 - Sunshine Rail Disaster Investigations - The Railway Accident At Sunshine 356.04 - Sunshine Rail Disaster Investigations - Clearing The Line 356.05 - Sunshine Rail Disaster Investigations - All That Was Left Of One Of The Smashed Four Wheeled Carriages On The Ballarat Train 356.06 - Sunshine Rail Disaster Investigations - The Bendigo Train 356.07 - Sunshine Rail Disaster Investigations - The Sunshine Platform Strewn With Portions Of The Wrecked Carriages 356.08 - Sunshine Rail Disaster Investigations - Scene On Platform Next Day 356.09 - Sunshine Rail Disaster Investigations - Display Information Labelsunshine rail disaster, sunshine station, sunshine

Photos taken from footbridge over rail lines adjacent to Sunshine Railway Station Gives a perspective view of Sunshine Gardens Bendigo line McKay factory clock business shops roadway of Hampshire Road motor vehicles tramways bus and billboard depicting picture theatre shows Billboard says Sunshine Theatre Phone MW 9140 The Merry Mad MARX Bros A Night in Casablanca Paulette Gollard Diary of a Chamber Maid This photo was reproduced for part of a display in Sunshine Librarys Interpretive Centre early 1997sunshine gardens, h.v. mckay memorial gardens, anderson road, sunshine

24 Page full colour calendar featuring Australian Trams, published by Top mill Pty Ltd. Cover (1299i5) features Sydney trams outside Central station in Eddy Ave. Other cities represented - Brisbane, Sydney, Adelaide, Perth, Fremantle, Bendigo, Ballarat, Sydney light rail, Hobart and Melbourne. Photos by Hugh Ballment, Dale Budd, Robert Merchant, Arthur Perry and the Sydney Tramway Museum. Priced at $9.95, and has "Parkholme Newsagency and Toys" sticker over bar code section, giving the same price. Distributed by Gordon and Gotch. Ballarat trams - 1299i1 - 33 at depot during hail storm on 20/8/1971 and 1299i2 - BTM trams 14 and 26 at Carlton St. during BTM operations 1970's or early 1980's. Used for month of June. Bendigo trams - 1299i3 - No. 4 at Eaglehawk terminus - 1/2/1971 and 1299i4 - trams 28, 2, 23 and two single truckers at Charing Cross 1970. Used for month of May.tramways, trams, australian trams, ballarat, bendigo, museums

The Sunshine Railway Disaster was a catastrophic rear‑end collision at Sunshine Station on 20 April 1908, killing 44 people and injuring more than 400, the worst rail accident in Victoria’s history. The official inquiry found the Bendigo train passed a signal at danger, likely due to brake failure, and could not stop in time. This accident led to major reforms in Victorian railway safety, including: - Stronger steel‑framed carriages. - Improved braking systems. - Better signalling and traffic control. - The disaster remains a defining moment in Sunshine’s early 20th‑century history. April 1998 Sunshine Rail Disaster Tom Riggsunshine rail disaster, sunshine railway disaster, sunshine station, tom rigg

On 20 April 1908, at about 10:50 pm, a Melbourne‑bound Bendigo express ran into the rear of a Ballarat train standing at Sunshine Station. The collision occurred at the junction at Sunshine railway station, on the Bendigo and Ballarat lines in Sunshine, Victoria. It was Australia's worst railway accident, and the impact was catastrophic, destroying several wooden carriages and causing a mass‑casualty event with 44 people killed and over 400 injured.Sunshine Rail Disastersunshine railway disaster, sunshine station, sunshine

Double Headed Rail from Ravenswood Station Siding which was dismantled circa 1987 the two rails were stored for a time at Maldon before being donated to Puffing Billy Museum Bearing makers marks of Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield, North East Derbyshire, England from 1872 - 1883 Double-headed rail In late 1830s Britain, railway lines had a vast range of different patterns. One of the earliest lines to use double-headed rail was the London and Birmingham Railway, which had offered a prize for the best design. This rail was supported by chairs and the head and foot of the rail had the same profile. The supposed advantage was that, when the head became worn, the rail could be turned over and re-used. In practice, this form of recycling was not very successful as the chair caused dents in the lower surface, and double-headed rail evolved into bullhead rail in which the head was more substantial than the foot. Info from Wikipedia - Rail Profile https://en.wikipedia.org/wiki/Rail_profile The first records of double headed rail being used In Victoria by Victorian Railways was in 1859, the rails, chairs, oak and trenails were imported from UK. After the 1870’s the Victorian Railways went over to using flat bottom rails, but they still needed replacement double headed rail for lines already laid and this continued up to at least 1883 Wilson & Cammell - Dronfield- Steel works Wilson & Cammell made Steel rails at their Dronfield Steel Works, in Dronfield England from 1872 - 1883 Mount Alexander & Murray River Railway The Melbourne, Mount Alexander & Murray River Railway Company received parliamentary assent in February 1853 to build Victoria's first inland railway from Melbourne to Williamstown, and Melbourne to Bendigo and Echuca. Construction commenced in January 1854 with work on a pier at Williamstown but lack of funds slowed progress, eventually prompting the company to sell out to the government. The 100-mile (162 km) section to Bendigo opened in October 1862. Its cost of £35,000 per mile made it the most expensive railway ever built in Australia. In 1864, the line was extended to Echuca, tapping into the booming Murray-Darling paddlesteamer trade. info from Museums Victoria - Victorian Railways https://museumsvictoria.com.au/railways/theme.aspx?lvl=3&IRN=450&gall=456 1863 Ravenswood Station open on the 1st Feb 1863 Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Ravenswood Siding When the Victorian Railways were established in 1856 they adopted one of the popular British permanent way standards - heavy 80lb (36.3kg) double-headed rail held up right in cast iron chairs attached to transverse timber sleepers by wooden pegs called trenails. The Ravenswood Railway siding was constructed in 1862 with 12 feet wrought iron double-head rail held in cast iron chairs with Ransom and May patent compressed keys. Trenails held the chairs to the sleepers and the joints were secured in joint chairs. Joints were subsequently joined using fish plates. It formed part of the Melbourne to Echuca rail line, initially known as the Melbourne, Mt Alexander and Murray River Railway. George Christian Derbyshire, the first Engineer-in-Chair of the Victorian Railways was responsible for the design and construction of the works. No new lines were built in Victoria using double-headed rail after 1870. The siding was disconnected from the main line in 1988. The Ravenswood Railway Siding demonstrates the original 1856 philosophy of the Victorian Railways to adopt British permanent way technology. The siding demonstrates significant aspects in the development of permanent way technology in England and Victoria over the period from the 1830's to the 1880's. The chairs in the Ravenswood siding are physical evidence of early railway technology rendered obsolete 120 years ago, namely joint chairs at rail joints and trenails to secure the chairs to the sleepers. The double-headed rail demonstrates an important stage in the evolution of British rail technology in the 1830s. The old fish plates, square headed bolts and square nuts demonstrate the success of fishing the rail joins. The Ravenswood siding demonstrates the earliest form of rail joint technology developed in England, and existing in Australia, the joint chair. In part of the siding the sequence of joint and intermediate chairs is consistent with the 1856 specifications, that sequence is rare with the joints secured in joint chairs. The survival of chairs in this sequence is rare and almost certainly demonstrates that they remained in continuous use at the same location from 1862 to 1988. This remnant of the Ravenswood siding has survived 126 years. The siding has proved to be the most significant of extant remnant double-headed sidings in Victoria, containing a rare combination of early permanent way technologies. Construction dates 1862, Info from Ravenswood Railway Siding Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/4693/download-report The remaining section of this siding is significant at the State and National levels in that it demonstrates the use of chaired rail by the Victorian Railways Department for the Trunk Lines and, more particularly, the following stages in the evolution of this long obsolete method of permanent way construction: a) The use of joint chairs and intermediate chairs at regular intervals inferring that the original wrought iron rail lengths were 12 feet, as is known through documentary sources to have been the case. The survival of chairs in this sequence is unique and almost certainly demonstrates that they have remained in continuous use at the same location and in the same sequence from 1862 to 1988 . b) The use of joint chairs and intermediate chairs designed for use with trenails. c) The use of later intermediate chairs designed for use with steel pins and the use of fished joints with steel double head chaired rail, representing a second method of constructing the permanent way using chaired rail technology. info from Ravenswood Siding - Melbourne/Echuca Railway Line - Victorian Heritage Database Report http://vhd.heritagecouncil.vic.gov.au/places/70103/download-report Addition to Citation for Melbourne to EchucaRailway Line 1/10/1990 Double Head Rail The surviving lengths of double head rail with chairs on this railway compare with one surviving similar remnant on the Geelong to Ballarat railway and are representative of permanent way construction techniques applied exclusively to the two trunk railways of the 1860's. In this respect they are rare survivors and may be unique at the national level and of technical importance at the international level to the extent that they enhance contemporary understanding of early railway building technology. Surviving lengths of chaired double head rail survive at Kyneton, Ravenswood and Bendigo on this railway and include a number of different types of cast iron intermediate and joint chairs with hardwood keys and metal pins. The Ravenswood siding is of special significance for the diversity of chair types and for the sequence of chairs recalling rail lengths known to be associated with construction of the line in 1862. Construction of the Railway Tenders closed on 24 March 1858 with no less than 133 tenders being received. A contract was let to Cornish and Bruce for £3,356,937 to commence work on 1 June 1858 and complete the line by 31 July 1861. Cornish and Bruce made quick early progress with the Melbourne to Sunbury section being officially opened on 13 January 1859. The line was officially opened to Bendigo (Sandhurst) on 20 October 1862 by the Governor of Victoria, Sir Henry Barkly. A great banquet was held for 800 guests and this was followed by a grand ball. The extension of the line to Echuca was a relatively simple matter as that part of the line was across plain country without any significant engineering challenges. Tenders were called for the work in 1863 and the work was completed in 1864 by contractors Collier and Barry Apart from the line contractors, other firms directly involved were J Shire law and Co (sleepers), R Fulton, Langlands Brothers and Co, William Crossley (water supply), B Moreland, Langlands Brothers and Co (platelayers lorries), E Chambers (iron pins, traversers), Miller and McQuinstan (luggage vans and steam engines) and various contractors for building works. Info from Engineers Australia Engineering Heritage Victoria Nomination for Recognition under the Engineering Heritage Australia Heritage Recognition Program for the Goldfields Railways - Melbourne , Bendigo & Echuca Railway Page 25 - .2.9.2 Statement from National Trust of Australia (Victoria) Listing number B5323 for Mt Alexander/Murray Valley Rail Line: Page 69 - Theme 3 https://www.engineersaustralia.org.au/portal/system/files/engineering-heritage-australia/nomination-title/Melbourne_%20Bendigo_Echuca%20Railway%20Nomination.pdf The Melbourne, Mount Alexander and Murray River Railway Company was a railway company in Victoria, Australia. It was established on 8 February 1853 to build a railway from Melbourne to Echuca on the Victorian-NSW border and a branch railway to Williamstown. The company struggled to make any progress and on 23 May 1856, the colonial Government took over the Company and it became part of the newly established Department of Railways, part of the Board of Land and Works. The Department of Railways became Victorian Railways in 1859. Construction of the Bendigo line commenced in 1858, but this private consortium also met with financial difficulties when it was unable to raise sufficient funds, and was bought out by the Victorian colonial government. The design work was then taken over by Captain Andrew Clarke, R. E., Surveyor-General of Victoria, with bridge designs completed by Bryson and O'Hara The contract for the first stage of the line from Footscray to Sandhurst (now Bendigo), was let to Cornish and Bruce for £3,356,937.2s.2d ($6.714 million) with work commencing on 1 June 1858. Completion of the permanent way was to be by 31 July 1861 https://en.wikipedia.org/wiki/Melbourne,_Mount_Alexander_and_Murray_River_Railway_Company Victorian Railways - purchased and imported the Rail and Chairs from Raleigh, Dalgleish, White and Co. London Importation of railway plant : abstract of a return to an order of the Legislative Assembly dated 27th June 1860 for - Copies of the advertisements calling for tenders, the names of the tenderers and the accounts and correspondence with Mr Brunel relating thereto GP V 1859/60 no. C 15 http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoC15.pdf Report from the Select Committee upon the Importation of Railway Plant : together with proceedings of the Committee, minutes of evidence and appendix GP V 1859/60 no. D 38 (2.9 MB) http://www.parliament.vic.gov.au/papers/govpub/VPARL1859-60NoD38.pdf Victorian Railways : report of the Board of Land and Works November 1862 GP V 1862/63 no. 21 (2.8 MB) https://www.parliament.vic.gov.au/papers/govpub/VPARL1862-63No21.pdfHistoric - Victorian Railways - Double Headed rail Ravenswood Railway Station and Siding Victorian Heritage Database Reports Victorian Heritage Register VHR H1100 Victorian Heritage Register VHR H1786 National Trust VHR H1100 Mount Alexander and Murray River Rail way Line National Trust2 rail lengths of Double Headed Rail made of Iron makers marks : Wilson & Cammell - Dronfield - Steel and 20 joint chairs with metal rail pins Makers mark Wilson & Cammell - Dronfield - Steel (possible date 187? very hard to read ) puffing billy, double headed rail, wilson & cammell - dronfield - steel works, ravenswood station siding, melbourne to echuca rail line, initially known as the melbourne, mt alexander and murray river railway.

17th April 1919 a stock train travelling north crashed head-on with a goods train coming in the opposite direction. The driver thought he had been given the all-clear to proceed into Sunbury and it was only when the train was approaching the Macedon Street bridge that he saw the red light and it was too late. The accident caused damage to rolling stack and disruption on the Bendigo and Maryborough lines. The train coming from Bendigo smashed onto the platform at Sunbury. The driver of the stock train was thrown under the van and suffered a broken arm and facial injuries. The fireman was thrown clear of the tracks. A local Sunbury doctor treated them before they were taken by a casualty train to hospital. A crew from Melbourne came to Sunbury to repair the damage. The track was cleared by that afternoon. This photograph shows the crane lifting steam engine off the platform at Sunbury Station. This rail crash was one of many that has occurred in and near Sunbury and further on the tracks on the Bendigo Line over the years. A black and white photograph with a cream border of a steam train engine on its side with a crane lifting it back onto the rails. Two workmen are standing by the tracks.train crashes, sunbury station