Used by the MMTB Doncaster bus drivers and conductors to place their bank notes into and secure it with the leather cord. Coins were paid in using a separate method. D 16 - Doncaster Bus depot, A - South Melbourne.Demonstrates the method of securing bank notes for paying in.Set of 3 cloth bags, fitted with leather cord and stamp in black ink.tramways, conductors, bank notes, pay-in, cash handling, cash bag

Demonstrates tramway equipment used by conductors or One Man Operators to hold and dispense coins when handling fares.Manufactured coin dispenser from brass and steel plate for 3 coins, - 3d, 6d and 1/- (5c and 10c coins fit the relevant slots). Coin holder sections are made from brass, fitted with springs and then braised together as unit. Screwed with four screws onto a cut and folded section of steel. The folded sections of steel would have allowed it fit into a cash bag or holder. The number "60" has been stamped into the lower section of the steel section - see image 3. See Reg Item 5691 for another example.tram, trams, fares, cash handling, tickets

Newspaper clipping from the Gazette (Ballarat) dated 18/7/1973 with a photo of the removal of the money chute at the SEC show rooms in Sturt St. Accompanying article notes the use of the chute from about 1934, and quotes Mr. Arthur Walker (87 years old) of Durham St. Ballarat who worked as a sub-accountant from 1906 recalling the method of transporting the cash on the last tram to the Powerhouse.date in pencil "18/7/73" and "Gazette" in upper right hand of cutting.trams, tramways, sec, sec showroom sturt st., cash handling, demolition

Has a strong association with Theo Dunstan Inspector in Ballarat; would have been issued to crews in order to hold coins within their cash bags.Manufactured coin dispenser for 1, 2, 5, 10, 20 and 50 cent coins, made from blue, white and red plastic with metal springs under each red coin support plate. Held in position by three metal screws. Manufactured by Victorlite Pty Ltd, Melbourne. The one and 20 cent coin plates are missing.tram, trams, fares, cash handling, tickets

Demonstrates tramway equipment used by conductors or One Man Operators to hold and dispense coins when handling fares.Manufactured coin dispenser from brass and steel plate for 3 coins, - 3d, 6d and 1/- (5c and 10c coins fit the relevant slots). Coin holder sections are made from brass, fitted with springs and then braised together as unit. Screwed with four screws onto a cut and folded section of steel. The folded sections of steel would have allowed it fit into a cash bag or holder. The number "40" has been stamped into the lower section of the steel section - see image 3. See Reg Item 7082 for another example.tram, trams, fares, cash handling, tickets

Would have been issued to crews in order to hold coins within their cash bags and make giving change faster.Demonstrates the method by which conductors collected fare tender.Manufactured coin dispenser for 1, 2, 5, 10, 20 and 50 cent coins, made from black and white plastic with metal springs under each coin support plate. Held in position by three metal screws.btm, ballarat tramway museum, trams, conductors, currency, coin, fares, cash, cash handling, tickets

Used by tramway revenue clerks, most likely the MMTB, including the Ballarat Tramway Museum to count coins, as only so many 3d or 6d would fit into each container. Each has a hole in the base to enable it to be checked that it was empty prior to use or after being used. One of the 3d containers have a loose "washer" which shows the nature of the construction. Has been secured with a piece of wrapping tape. One of the 6d tubes has a label advising that it would hold "$30 of $2 coins"Demonstrates the methodologies used to count coins and stack them in a revenue office. Provides a sample of each coin that would have been used. Brass coin holder - for use in counting 3d and 6d coins. Made from brass tube with a brass washer rolled or fixed to one end. In storage bag is are 2 x 3d and a 2 x 6d and 1x5c coins. 5 No. x 6d and 6 No. x 3d holders held in the collection.tramways, tickes, cash, cash handling, depots, coins, revenue clerks

Typical of the type of coin bags the Museum used to bag money for depositing into a bank. Similar bags were used for other denominations. This enable the bank to weigh the bag and not necessarily actually count the contents. Copper coins were last minted in 1990 and then phased out. See reference.Demonstrates the process of cash handling and banking.Set of two coin bags $1 copper - plastic with sealable strip and a unused paper bag from the ANZ bank, both for $1 copper (1 or 2 cent coins), or for the plastic bag $2 of 5c coins.btm, btps, coins, cash bags, currency, banking, cash handling

Used by MMTB to ship coins or bank notes from depot to banks or head office. CWL - Camberwell Depot.Demonstrates the bags used by the MMTB to transfer cash or bank notes.Canvas cloth bag sewn, canvas off white or karki colour printed with "M.M.T.B" on one side and with "CWL" in black texta on the other side.See physical descriptiontramways, mmtb, tickets, cash handling, depots, revenue clerks

Used by tramway revenue clerks, most likely the MMTB to count coins, as only so many 3d or 6d would fit into each container. Each has a hole in the base to enable it to be checked that it was empty prior to use or after being used. One of the 3d containers have a loose "washer" which shows the nature of the construction. Has been secured with a piece of string.Demonstrates the methodologies used to count coins and stack them in a revenue office. Provides a sample of each coin that would have been used.Brass coin holder - for use in counting 3d and 6d coins. Made from brass tube with a brass washer rolled or fixed to one end. In storage bag is a 3d and a 6d coin. 5 x 6d and 6 x 3d holders held in the collection.See physical descriptiontramways, tickets, cash handling, depots, revenue clerks, coins

Cloth bag - sewn brown canvas with a metal ring and cloth strip attached to one side and stencilled "16" on both sides of the bag. Used by Conductors to pay in their cash at depots following the introduction of ticket machines on the Z class trams. 2nd copy - "19" added 3/7/2019 from donation of Hugh Waldrontrams, tramways, tickets, cash handling, depots, revenue clerks, conductors

Cloth bag - cotton, machine woven printed with the Green Armaguard logo - used to hold cash that was collected from the depots. Advised by the donor of their use during his time with the MMTB and The Met.trams, tramways, revenue clerks, cash bag, cash handling, essendon depot, administration, security

Cash Receipt - printed on a blue sheet of paper, No. 65940, issued by the MMTB to Drv. A. Berg for the replacement of his driver plastic uniform number - $1. Issued 17-11-1972. Form 1/14, Dec. 1971trams, tramways, mmtb, finances, uniforms, cash handling

Manufactured coin dispenser for 1, 2, 5, 10, 20 and 50 cent coins, made from black, white plastic with metal springs under each white coin support plate. Held in position by three metal screws. Manufactured by BIPA Australia. Fitted with two openings at the rear so a leather or belt strap could be passed through. There are a number of 1, 2, 5, 10, 20, 3d, half penny and penny coins in the unit - for display purposes only, not collected.trams, tramways, fares, cash handling, tickets

Metal Cash Tray for holding coins, formed from stainless steel and welded to give five compartments or areas for coins and one full length slot or opening at the rear for notes and other papers. Used by One Person Operator (OPO) or drivers from the time of the introduction of OPO's on the tramways until the full introduction of Metcard. Collected by Carolyn Dean/Cleak. Two copies held.trams, tramways, tickets, cash handling, metcard

This cash ball was used by Cramond and Dickson, a large clothing store on the corner of Liebig and Timor Streets, Warrnambool. The Cash Ball system serviced the ground floor, which measured about 30 metres by 25 metres. An overhead pipe connected each service point in the store, with the pipes connected to the upstairs office. The ball would be filled with a note of details of the sale, and the cash payment; a vacuum system would be activated that would transport the ball upstairs to the office, where details were recorded and the change assembled. Change was placed in the ball, and the vacuum system was activated to return the ball to the correct sales point. A frequent customer has reported that she never remembered the system not working efficiently, and the service was probably quicker than having a cash register at each sales location. John Glass Cramond and James Dickson migrated from Scotland to Melbourne, where they opened a Cramond and Dickson store in St Kilda. They were inspired by the growth in Warrnambool after a visit and opened a second store there in 1855. The Cramond and Dickson store, grocers – drapery – ironmongery - chemist, was located on the corner of Liebig and Timor Streets, Warrnambool (now the site of a Mexican restaurant). Both Cramond and Dickson were involved in the business and social aspects of Warrnambool’s community. Cramond and Dickson closed in 1974. An advertisement placed by Cramond and Dickson in The Camperdown Chronicle, Saturday 6th April 1895, states them “showing the latest novelties for the coming winter season” … “import directly from English and Continental manufacturers” … “representatives in London … always in touch with the Newest Continental Fashions” ... “having been established for so many years we know the requirements of the Western District”… “allow 5 percent discount on goods paid for at the time of purchase”.The cash ball represents an efficient retail system used in the late 19th to mid 20th century to securely transfer cash from one part of the store to another. It is significant for its association with Cramond and Dickson, a large retail store established in Warrnambool and operating from 1855 to 1974. Both partners were prominent figures in the community.Cash ball: a wooden, round, hollow ball in two pieces. Two half spheres that fit into each other securely. Both are marked with carved characters. "B4" and one has "Fancy" marked on it. It was used by Warrnambool's Cramond and Dickson clothing store. "B4" "Fancy"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cash ball, cramond and dickson, office equipment, retail equipment, cash handling, sales, warrnambool business, department store, commerce, timor street, liebig street

The typed document, most likely from an original document, details the rules for Electric Supply Co of Victoria (ESCo) Conductors. ESCo was the operator of the Ballarat Tramways from 1905 to 1934. Notes issuing of tickets, operational issues, trailers, bell signs, cash handling, parcels, behavior, uniforms, and inspectors. Conductors were primarily youths, under 21 and could be sacked for errors and were generally not employed after they turned 21. Notes the Grenville St shelter/office of ESCo. Not known who retyped the document.Yields information about the rules that ESCo conductors operated under and the operation of trailers.Six page typed document on ruled foolscap paper with four punch holes on left side and stapled in top left hand corner.tramcars, tramways, conductors, tickets, esco, trailers

Rubber Stamps; - Cash Box, missing handle, no key, contains rubber stamps as per attached, some stamp impressions on piece of paper in box.see attached.mining, equipment, deborah mine, mccoll rankin & stanistreet

Conference papers or Presentation Notes or Report, over 300 foolscap sheets bound with a cotton tape binder in the top left hand corner titled "Australian and New Zealand City Transit Conference - Hobart 21 to 24 November 1961". Includes reports from Melbourne, Sydney, Adelaide, Brisbane, Perth, Tasmania, Auckland and Dunedin. Christchurch and Wellington also attended but did not submit sufficient copies. looks at Statistic, industrial issues, fares, rollingstock, buses, traffic, school children, bus stops, accounting, depreciation, cash handling, amenities, insurance, stores, costs and some general matters. No table of contents, programs etc. trams, tramways, conferences, buses, trams, fares, industrial issues, bus stops, accounting, insurance, australasian tramway conference, management

Tin, rectangular metal box painted black with gold and brown stripes and a lock in front. Hinged lid with swinging handle; possibly cash tinflagstaff hill, warrnambool, shipwrecked coast, flagstaff hill, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, tin box, cash tin, money tin, storage

As part of the process of training workers who handled cash (coins and banknotes) these training material replica (colour only) notes were produced. Has the equivalent value given under the written face value of the note. This set was used by the Post Office. Decimal conversion occurred on 14/2/1966. A $5 note was not introduced until 1967. Printed by Motivational Sales and Promotions of South Melbourne.Demonstrates decimal conversion training materials.Set of four paper colour replica Australian bank notes - in the colours that were actually used - 1$, 2$, $10 and $20. decimal conversion, banking, training, australia post, bank notes

Linked to the 1983 Ash Wednesday BushfiresSmall metal lockable cash box with handle and tray insert This item was burnt in the 1983 Ash Wednesday bushfires which destroyed the FCV Office and nursery It was recovered from ashes of the building It was in the office safe and contained charred bank notes and a chequebushfire, forests commission victoria (fcv)

Toothaches have been with us since the evolution of teeth and extracting teeth. I wonder what poor Homo erectus did when suffering with a toothache. He probably just suffered and probably became very bad tempered. Ancient Dentistry Significant tooth decay did not appear until hunter-gatherer societies became agrarian. The change in diet included a large increase in carbohydrates which then led to tooth decay. Early man was primitive but he was also pretty smart. Some time around 8000 years ago someone in the area that is now Pakistan was using a drill to remove tooth decay. Examination of Neolithic skulls have revealed the handiwork of at least one very early dentist. A Sumerian text in about 5000 B.C. taught that the cause of tooth decay was tooth worms. Proposed cures for toothache were numerous. Early Egyptians wore amulets. An Egyptian named Hesy-Re, is known as the first dentist. Praise for his dentistry is inscribed on his tomb. Unfortunately it doesn’t delineate what he did to earn the praise. Pliny, the Elder, recommended finding a frog at midnight and asking it to take away the pain. The doctor to Emperor Claudius around 50 A.D. had his toothache patients inhale smoke produced by scattering certain seeds on burning charcoal and then rinsing the mouth with hot water. This was to expel the tooth worms. On the more practical side Aristotle and Hippocrates both wrote about the treatment of tooth decay. A primitive forceps was used for extracting teeth. Some dentists at that time were able to weave wire in the teeth to stabilize loose teeth. Medieval Torture From about 500 A.D. to 1100 A.D. monks were well educated and well trained and did some of the surgical procedures of the time. Barbers handled the rest of the operations, especially blood letting and tooth extractions. In 1163 the Pope put a stop to all surgeries by monks and the field was left open to the barbers. Barbers were, after all, very skilled with knives and razors. In fact, the barber pole, red and white spiraling stripes, is a symbol of the blood letting; red for blood. white for bandages. In the 1300s a Barbers’ Guild was established which divided the barbers into two groups: those with the skills and training to do procedures and those who were relegated to blood letting and tooth extractions. Pliers from a blacksmith’s foundry were the only device available. Barbers would often go to fairs and advertise painless tooth pulling. A shill in the audience would come on the stage, feigning severe toothache. The barber would pretend to extract tooth, pulling out a bloody molar he had palmed earlier. The supposed sufferer would jump for joy. The barbers set up near the bands at the fairs so that the music would drown out the screams of their patients. If the tooth was loose enough, the barber would tie a string around the tooth and yank hard to extract the tooth. This was a much less painful and dangerous procedure than the pliers. The pliers often fractured other teeth and sometimes the jaw. The procedure was far from sterile and infection was a common problem and some people bled to death. The Renaissance and the Rise of Tooth Decay In the 1400s refined sugar was introduced into Europe but only reached the tables of the wealthy. While their betters were munching on sweets, the poorer folk suffered fewer toothaches. Queen Elizabeth I was known for her blackened teeth. George Washington had a tooth extraction every year after age 22. He supposedly had a set of wooden false teeth but his dentures were actually ivory. The earliest instrument designed for tooth extraction was the dental pelican, which was shaped something like a pelican’s beak. The pelican was replaced in the 1700s by the dental key, which was fitted down over the affected tooth and was better able to grip the tooth. Both still often caused more damage than relief. The Development of Modern Dentistry Modern dental equipment began to be introduced in the 1800s about the time when dentistry became a profession and dental schools began to open. Ether was used starting in 1846 to anesthetize the pain and local anesthetics were introduced in the early 1900s. Modern dentists no longer have to seat their patients on the floor and have helpers to hold them down. Dentistry is as close to painless as possible now. There is no excuse to suffer the agony of a toothache these days. And extracting teeth is no longer dangerous. https://arizonadentalspecialists.com/the-surprising-history-of-extracting-teeth/ This tooth extractor was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he would take time to further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . The organisation began in South Australia through the Presbyterian Church in that year, with its first station being in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill where he’d previously worked as Medical Assistant and purchased a share of the Nelson Street practice and Mira hospital from Dr Les Middleton one of the Middleton Brothers, the current owners of what was once Dr Tom Ryan’s practice. Dr L Middleton was House Surgeon to the Nhill Hospital 1926-1933, when he resigned. [Dr Tom Ryan’s practice had originally belonged to his older brother Dr Edward Ryan, who came to Nhill in 1885. Dr Edward saw patients at his rooms, firstly in Victoria Street and in 1886 in Nelson Street, until 1901. The Nelson Street practice also had a 2 bed ward, called Mira Private Hospital ). Dr Edward Ryan was House Surgeon at the Nhill Hospital 1884-1902 . He also had occasions where he successfully performed veterinary surgery for the local farmers too. Dr Tom Ryan then purchased the practice from his brother in 1901. Both Dr Edward and Dr Tom Ryan work as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He too was House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. Dr Tom Ryan moved from Nhill in 1926. He became a Fellow of the Royal Australasian College of Surgeons in 1927, soon after its formation, a rare accolade for a doctor outside any of the major cities. He remained a bachelor and died suddenly on 7th Dec 1955, aged 91, at his home in Ararat. Scholarships and prizes are still awarded to medical students in the honour of Dr T.F. Ryan and his father, Dr Michael Ryan, and brother, John Patrick Ryan. ] When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery states “HOURS Daily, except Tuesdays, Fridays and Saturday afternoons, 9-10am, 2-4pm, 7-8pm. Sundays by appointment”. This plate is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. Dr Edward Ryan and Dr Tom Ryan had an extensive collection of historical medical equipment and materials spanning 1884-1926 and when Dr Angus took up practice in their old premises he obtained this collection, a large part of which is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. During his time in Nhill Dr Angus was involved in the merging of the Mira Hospital and Nhill Public Hospital into one public hospital and the property titles passed on to Nhill Hospital in 1939. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. ). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Tooth extractor, dental surgical instrument. Metal with cross hatched pattern on handle. Stamped with maker's mark on hinge. Other stamps inside handles. Part of the W.R. Angus Collection.Stamped on hinge 'CASH & SONS ENGLAND'. Inside handles are 'C', 'P' and '27'.flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, surgical instrument, t.s.s. largs bay, warrnambool base hospital, nhill base hospital, mira hospital, flying doctor, dental surgical instrument, tooth extractor

This miniature cash tin was produced by Fry's Chocolate Company of England as a promotional giveaway and probably held some chocolate samples. It would then have been used in a household for keeping trinkets or other small items. The Fry's Chocolate Company was established in Bristol, England in the mid 18th century by Joseph Fry and in the mid 19th century it produced the first mass-produced chocolate bar (1866 - Chocolate Cream, 1913 Turkish Delight). The company merged with the Cadbury company in 1919 and the Tasmanian Cadbury factory which opened in 1921 was known as Cadbury-Fry-Pascall. Fry's chocolate bars were very popular in Australia. This item is retained as a memento of Fry's Chocolate Company, the products of which featured in Australian life for many decades. This is a rectangular metal tin painted black and light brown. It has a hinged lid and a metal handle held with clips inserted into slits on the top of the lid. There is printing on the lid and a label on the base.Cash Fry's Chocolatechocolate bars, fry's chocolate, miniature cash tin

Melvin Newton Lovell was born in Allegheny, Venango county, Pennsylvania, on 31 August 1844, to Darius T. Lovell (1815-1855) and Susan B. (Conover) Lovell (1827-1883). When Melvin Lovell was a boy, the family removed to Kerrtown, a village located in the vicinity of Titusville, PA. There Melvin served an apprenticeship at the carpenter's trade, and his natural mechanical talent enabled him to become a skilled workman. He followed his trade during the major portion of his term of residence in Kerrtown. In 1861, at seventeen years of age, Melvin Lovell left his home and, without parental authority, and entered the Union army soon after the outbreak of the Civil war. In August 1862, he was enlisted as a private in the 127th Pennsylvania Volunteer Infantry and saw active service until receiving his discharge at the end of May 1863. In 1865 he took up his residence in Erie, where he worked at the carpenter's trade for several years thereafter. In 1869 Melvin Lovell invented and patented several useful articles for household use, and in that year he began the manufacturing of certain of these inventions, in partnership with Franklin Farrar Adams, another inventor. Among the principal products of the original factory were washing machines and step-ladders. In 1881 Lovell individually began manufacturing other of his patents, including spring beds, and from modest inception, his Lovell Manufacturing Company grew to be one of the largest industrial concerns of its kind in the country and was recognized as being the most extensive manufacture of clothes-wringers in the entire world. In connection with his manufacture of domestic items, Lovell established sales agencies for his products in all parts of the country, and these branches were known as the Lovell stores. These goods were sold on the instalment plan and after his business had already been established becoming a substantial concern Lovell invented and patented the famous wringer which bears his name under the “Anchor” brand, and in later years he confined his operations largely to the manufacture of this very superior household invention. Lovell was also one of the organizers and stockholders of the Combination Roll & Rubber Manufacturing Co, of New York, which was formed to manufacture his patents, with headquarters in New York and a factory at Bloomfield, New Jersey.A significant household item used in the process of washing clothes by a man who had started in 1869, as a young carpenter and later he became a successful businessman and manufacturer of household items. Lovell was granted numerous patents for various devices during his career including several patents for adding machines (cash registers).Wringer (or mangle); portable wooden washing wringer with rubber rollers, manually driven by iron set of gears and handle. Includes iron clamps and adjusting screws for attaching. Marked on frame "382", "12 x 1 3/4" Anchor Brand "Made in USA" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, flagstaff hill maritime village, great ocean road, mangle, clothes wringer, washing equipment, laundry, wringer, domestic, washing mangle

Found in safe which has been in the building for over 100 years. Documents found in the safe indicate that it was used by the trustees of the Foresters, StanleyThat the object was used by Stanley groups/ residentsRectangular metal box with removable cash drawer. Black interior gold & copper coloured detail on exterior. Brass handle on lid.stanley athenaeum, foresters, temperance hall, safe, victorian

This solid box has a dark purple gold & red design. There is an ornate latch & handle on the lid, and a pair of handles each end. Internal cash box has a black metal removable insert box of 3 compartments. When sitting inside cash box there is space underneath for notes/papers. There is a small lay lock on the front panel. No key was found for the box."PATENT 4489" on the internal boxsafe, victorian, stanley athenaeum, foresters, temperance hall

Tin box in black and gold square design '170016'. Brass handle at top - repaired. Homemade black hinge added to top. Lockable with lock included. Black interior paint. 3 money sections, detachable as a whole. Each section has a lid with a small handle. storage room underneath.small lock - 'Lion' brand. Made in Japan approximately 3 sq cm with steel locking device.

Tin box in brown and gold square design '170016'. Gold painted outside with red stripe housing brown lines with solid brown area where brass handles attached. Lockable. Black interior paint. 3 money sections, detachable as a whole. Each section has a lid with a small handle. storage room underneath. Hinged lid (patent 4489?0 and 'note' storage below. Exterior handles both sides. Patent 4489?

1920's Station Cash Box Tin Made by Hobbs & Co London Lever Machine Made Alfred Charles Hobbs (October 7, 1812 – November 6, 1891) was an American locksmith and inventor. Hobbs went to London as a representative of the New York company of Day & Newell, which was exhibiting at the Great Exhibition of 1851. Hobbs had brought with him his boss's (Robert Newell) Parautoptic lock, designed to compete with, and surpass, the locks available at the time in Britain. He was the first one to pick Bramah's lock and the Chubb detector lock at the Great Exhibition of 1851 and forced the lock manufacturers to improve their designs. The lock controversy continues a subject of great interest at the Crystal Palace, and, indeed, is now become of general importance. We believed before the Exhibition opened that we had the best locks in the world, and among us Bramah and Chubb were reckoned quite as impregnable as Gibraltar— more so, indeed, for the key to the Mediterranean was taken by us, but none among us could penetrate into the locks and shoot the bolts of these masters. The mechanical spirit, however, is never at rest, and if it is lulled into a false state of listlessness in one branch of industry, and in one part of the world, elsewhere it springs up suddenly to admonish and reproach us with our supineness. Our descendents on the other side of the water are every now and then administering to the mother country a wholesome filial lesson upon this very text, and recently they have been "rubbing us up" with a severity which perhaps we merited for sneering at their shortcomings in the Exhibition. In 1854 he was awarded a Telford Medal by the Institution of Civil Engineers for his paper 'On the Principles and Construction of Locks'. Sign on a strong room door. Hobbs became one of the founders of the lock making firm of Hobbs Hart & Co. Ltd. The company started in 1851 and was formally registered as Hobbs and Co. in 1852. But by 1855 it had become Hobbs, Ashley and Company. The name then changed to Hobbs, Ashley and Fortescue, with an address at 97 Cheapside in London. Then for the next ninety years the address was 76 Cheapside in London. In 1860 Hobbs returned to America and lived in Bridgeport, Connecticut, and went on to hold a dozen patents for firearm ammunition manufacturing. In 1880 he listed himself as a "Superintendent Of Cartridge Factory" Info from https://en.wikipedia.org/wiki/Alfred_Charles_HobbsHistoric - Railways - Station Cash Box Tin 1920's Station Cash Box Tin - Hobbs & Co London Metal Tin - painted Black, Gold and Red with Brass Lock and HandleHobbs & Co London Lever Machine Made1920's station cash box tin, puffing billy