After training as a Cartographic Draftsman within the mining industry, I worked as a property illustrator for real estate firms in the eastern suburbs of Melbourne for 23 years from 1983. I initially photographed houses with a Polaroid camera and made a 'thumbnail' sketch while there. The photos were used to scale off a sketch in pencil and then that sketch was overlaid with drafting film and the 'pen and ink' completed. The pens I used were the Rotring ‘Rapidigraph’ drafting pens. The ink was also made by Rotring (German).The film was ‘Rapidraw’, polyester drafting film, double matte. It takes a very fine line and doesn’t bleed. As well as house sketches, there were often floor plans and site plans ordered. Aerial sketches were ordered when the property needed an overall view. (Margaret Picken, 2020)This drawing is one of a series created by Margaret Picken for real estate agents in Melbourne between 1983 and 2006. Each work is signed and dated by the artist.Gift of Margaret Picken, 2020Pen and ink drawing on drafting film of 3/43 Clyde Street, Kew East by Margaret Picken.3/34 CLYDE ST., EAST KEW / MARG. PICKEN artist -- margaret picken 1950-, property illustrations — buildings — kew east (vic.), 3/34 clyde street - kew east (vic)

After training as a Cartographic Draftsman within the mining industry, I worked as a property illustrator for real estate firms in the eastern suburbs of Melbourne for 23 years from 1983. I initially photographed houses with a Polaroid camera and made a 'thumbnail' sketch while there. The photos were used to scale off a sketch in pencil and then that sketch was overlaid with drafting film and the 'pen and ink' completed. The pens I used were the Rotring ‘Rapidigraph’ drafting pens. The ink was also made by Rotring (German).The film was ‘Rapidraw’, polyester drafting film, double matte. It takes a very fine line and doesn’t bleed. As well as house sketches, there were often floor plans and site plans ordered. Aerial sketches were ordered when the property needed an overall view. (Margaret Picken, 2020)This drawing is one of a series created by Margaret Picken for real estate agents in Melbourne between 1983 and 2006. Each work is signed and dated by the artist.Gift of Margaret Picken, 2020Pen and ink drawing on drafting film of 12 Clyde Street, Kew East by Margaret Picken.12 CLYDE ST., KEW E. / MARGARET PICKEN ~95 / WOODARDS ~ BALWYNartist -- margaret picken 1950-, property illustrations — buildings — kew east (vic.), 12 clyde street - kew east (vic)

After training as a Cartographic Draftsman within the mining industry, I worked as a property illustrator for real estate firms in the eastern suburbs of Melbourne for 23 years from 1983. I initially photographed houses with a Polaroid camera and made a 'thumbnail' sketch while there. The photos were used to scale off a sketch in pencil and then that sketch was overlaid with drafting film and the 'pen and ink' completed. The pens I used were the Rotring ‘Rapidigraph’ drafting pens. The ink was also made by Rotring (German).The film was ‘Rapidraw’, polyester drafting film, double matte. It takes a very fine line and doesn’t bleed. As well as house sketches, there were often floor plans and site plans ordered. Aerial sketches were ordered when the property needed an overall view. (Margaret Picken, 2020)This drawing is one of a series created by Margaret Picken for real estate agents in Melbourne between 1983 and 2006. Each work is signed and dated by the artist.Gift of Margaret Picken, 2020Pen and ink drawing on drafting film of 38 Clyde Street, Kew East by Margaret Picken.38 CLYDE ST., E.KEW / MARGARET PICKEN ©2000 / FLETCHERS REAL ESTATEartist -- margaret picken 1950-, property illustrations — buildings — kew east (vic.), 38 clyde street - kew east (vic)

After training as a Cartographic Draftsman within the mining industry, I worked as a property illustrator for real estate firms in the eastern suburbs of Melbourne for 23 years from 1983. I initially photographed houses with a Polaroid camera and made a 'thumbnail' sketch while there. The photos were used to scale off a sketch in pencil and then that sketch was overlaid with drafting film and the 'pen and ink' completed. The pens I used were the Rotring ‘Rapidigraph’ drafting pens. The ink was also made by Rotring (German).The film was ‘Rapidraw’, polyester drafting film, double matte. It takes a very fine line and doesn’t bleed. As well as house sketches, there were often floor plans and site plans ordered. Aerial sketches were ordered when the property needed an overall view. (Margaret Picken, 2020)This drawing is one of a series created by Margaret Picken for real estate agents in Melbourne between 1983 and 2006. Each work is signed and dated by the artist.Gift of Margaret Picken, 2020Pen and ink drawing on drafting film of 2/3 Clyde Street, Kew East by Margaret Picken.2/3 CLYDE ST., E. KEW / MARGARET PICKEN ~92 / WOODARDS ~ KEWartist -- margaret picken 1950-, property illustrations — buildings — kew east (vic.), 2/3 clyde street - kew east (vic)

Private William Clyde Kelly served in World War One as this certificate states he also did war time service in World War two. Certificate of Discharge for William Clyde Kelly 4521 service in the Australian Imperial Forces; there are crease marks where the document has been folder, there is obvious in ground dirt from being carried in a pocket or walletAustralian Imperial Expeditionary Force Certificate of Discharge of 4521 Private William Clyde Kelly at the termination of his period of Enlistment. Service towards completion of engagement 1550 days / Service Abroad 1334 days. Medals & Decorations Distinguished Conduct Medal; Returned Soldier's Badge Issued No. 226186certificate, certificate of service wwi

Clyde River boats ScotlandClyde River boatsColourt & B&W brochures, pamphlets & news article re boats on the Clyde River Scotland.Reverse " NIL "historical references

The Former Clyde Cameron College was constructed in 1976-7 as a residential training college for trade unions. The college was commissioned and operated by the Trade Union Training Authority (TUTA) from 1977 until its closure in 1996. The design team was the Architects Group and the Commonwealth Department of Construction was responsible for site supervision and contract administration. The building was constructed jointly by Costain Australia Ltd and M.A. & A.W. Chick of Albury. The foundation stone was unveiled by Clyde Cameron in 1976. He was the serving Federal Minister for Labour from 1972 to 1974, Minister for Labour and Immigration 1974 - 1975 and Minister for Science and Consumer Affairs in 1975. The building was completed at a cost of $6.5 million in 1977. It was one of the most controversial of the 1970s due to its Brutalist architecture. The complex consists of a series of wings of one and two storeys linked by pre-cast concrete pipe walkways. Inside the wiring and pipes were left exposed and painted in primary colours to show off the workmanship. The accommodation, most of them single rooms, were able to house 70 students at a time with 1200 students to go through each year. The training college was closed in 1996 and was taken over by the Murray Valley Private Hospital and Murray Valley Radiation Oncology. In July 2008, the Royal Australian Institute of Architects awarded its “25 Year Award for Enduring Architecture” to Clyde Cameron College. The building was again sold in February 2023, although its future is yet to be determined.The former Clyde Cameron College is of architectural significance as an example of the late twentieth century Brutalist style and the work of Victorian architect and lecturer Kevin Borland. It also has historical significance for its association with the Trade Union movement, and the Whitlam government, including its role as Australia’s first residential trade union training facility. It is a physical reminder of the influence of the union movement in the 1970sA collection of colour photographs documenting the buildings at the former Clyde Cameron College, Wodonga.clyde cameron, trade union training, clyde cameron college

Home of Mr and Mrs Henry Haeffner and family from about 1920 until 1980s. Built in about 1910, the house retained the popular Victorian bullnose verandah roof but added timber Federation style fretwork and the verandah had become shortened. The chimneys are slim in Federation style. A sale notice for the property was donated by Marj Higgins (nee Haeffner); it is filed with other information relating to the property. A black and white photo of an Edwardian style timber home. The home has the popular bullnose verandah roof and Federation style fretwork. The chimneys are slim in Federation style. A low picket fence runs across the front of the property. A "For Sale" sign is at the front advertising the auction on 28 Julyedwardian style, federation style, (mr) henry haeffner, clyde street, surrey hills, 1910-1920

ill, p.58.non-fictionThe history of steam locomotives built by the Clyde Engineering company of Granville in Sydney New South Wales.locomotives - australia - history, steam locomotives - australia - history

A collection of 5 manuals for a range of Clyde Diesel Locomotives. The collection includes instructions for the Clyde G8B, G16C, G26C, 1800 HP Model A and the Clyde Mailiner Model 2. On the cover of each manual, the owner has written the letter for the name of class which the relevant locomotive was ascribed in Victoria. The Clyde Engineering Company Limited was registered on 30 September 1898 in New South Wales. It was one of the iconic Australian engineering firms whose history spanned just over a century and was one of the few locomotive and rolling stock builders in the world that transitioned from steam to diesel to electric traction. The company was formed by Walter Maplesden Noakes who purchased the works of Hudson Brothers Limited in the Sydney suburb of Granville, which had been established by in 1882. The manuals refer to the following locomotives:- Clyde Model G8B which operated in Victoria as the new T class locomotive. It was introduced in 1955 and was the most numerous class of diesel locomotive used in Victoria. This model continued in operation until 1968, although many were modified for continued service. Clyde Model G16C, later superseded by the G26C operated in Victoria as the X class locomotive between 1966 and 1976. Clyde Model 1800HP Model A became the S class locomotives in Victoria. Additional numbers were purchased in preparation for the opening of the standard gauge line between Melbourne and Albury, They entered service between 1957 and 1961. Clyde Mainline Model 2 became the B class in Victoria. The B class were the first mainline diesel-electric locomotives in Victoria entering service in June 1952. They were initially used on the main passenger and freight services, before moving out to other areas. They remained in service until the early 1990s.fiction This collection of Diesel Locomotive Manuals was published by the Clyde Engineeringclyde engineering, diesel locomotives, locomotives victoria

Example of late 19th Century home built by Irving and Glover for Abraham Baxter, a well known engineer, railway contractor and horse racing enthusiast. The estate consisted of about 300 acres, taking in the northern and eastern faces of Green Hill. The family lived at "Mt. Helen" until 1908. The house has been restored in recent in recent years.The fine brick house is an example of late 19th century home built and occupied by the Baxter family until 1908.Colour photograph of "Mount Helen" built c.1888 by Irving and Glover"Mt. Helen". built c. 1888building, green hill, irving and glover, abraham baxter

Example of late 19th Century home built by Irving and Glover for Abraham Baxter, a well known engineer, railway contractor and horse racing enthusiast. The estate consisted of about 300 acres, taking in the northern and eastern faces of Green Hill. The family lived at "Mt. Helen" until 1908. The house has been restored in recent in recent years.The fine brick house is an example of late 19th century home built and occupied by the Baxter family until 1908.Colour photograph of the front entrance to "Mount Helen" built c.1888 by Irving and Glover"Mt. Helen". built c. 1888building, green hill, irving and glover, abraham baxter

Example of late 19th Century home built by Irving and Glover for Abraham Baxter, a well known engineer, railway contractor and horse racing enthusiast. The estate consisted of about 300 acres, taking in the northern and eastern faces of Green Hill. The family lived at "Mt. Helen" until 1908. The house has been restored in recent in recent years.The fine brick house is an example of late 19th century home built and occupied by the Baxter family until 1908.Colour photograph of the interior hallway of "Mount Helen" built c.1888 by Irving and Glover"Mt. Helen". built c. 1888building, green hill, irving and glover, abraham baxter, interior

Sepia photograph of Grenville Standard building, with view of railway station and other buildings spread across open land at east of township."S E Surman".grenville standard [newspaper], buildings, linton railway station, clyde street linton

Built 1858-9, originally Bennett-Todd butcher shop. Jim Ryan hairdresser and billiard-snooker parlour in 1930s.Colour photograph showing a long white painted building with green roof and verandah fronting onto footpath. Photograph taken in 1988 of building on corner of Sussex and Clyde Streets, Linton, at that time the home of Barry Jarvis and used as business premises by MCR Drafting.mcr drafting [business], barry jarvis, buildings, shops, houses

The P.S Clyde was built in 1884 by W.Wilson, in Echuca and was owned by the Evans Bros. It sunk in the Murrumbidgee river in 1920 and was raised and converted into a barge in 1922. The barge Excel was built as the Barge Adam in 1897. It was owned by the Permewan Wright Co. and renamed barge 'Excel' in 1909. (Ref ; Parsons, Ronald, "Ships of the Inland Rivers" This photograph must have been taken before 1920 when the P?S Clyde was still a paddle steamer.One of two black and white photographs of the P.S Clyde and the barge Excel moored to a wharf, possibly at Swan Hill. People are on the wharf and both vessels. There is a crane fitted on the Clyde loading, bags of wheat. A woman is standing in front of the wheel house. There is a man inside the wheel house. Steering mechanism appears to be attached at the back of the barge, and there also appears to be a flag flying on the back of the barge. Three men are on the barge supervising the loading process.Written on the back of the smallest photograph are the words "2nd copy in Clyde file." On the barge in the photograph is the word 'EXCEL' 'and the word 'Clyde' can be seen on the bow of the paddle steamer .p.s.clyde, excel, adam, evans bros, murrumbidgee river

Instruction - 4 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "EECK1 (Clyde) Controller Maintenance - Electrical Mechanics Procedure" Details electrical work to be done on the rostered day in for EECK1 (Clyde) controllers, safety, checking, when to replaced and additional work to be done on the 4th and 12th rostered day-in service. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

Wooden striking mallet and circular wooden block with carved lettering and Probus logo.Probus Club of Ringwood Inc. - Probus logo - Made and donated by Clyde Aitken April 2002.

Canoeing on the River Yarra at Melbourne was an important and widespread recreational pursuit for Melbournians, especially in the first half of the twentieth century. The Victorian Canoe Club was formed in 1912 at a meeting in Melbourne and its first committee elected in the same year. Records indicate that the Club continued into at least the 1950s .The album has historic and social significance as a record of recreational activities (as well as canoe making) in the early years of the twentieth century. It has local significance as the site of the headquarters of the Club was in Studley park. A number of photographs in the album provide vistas of Kew on the Yarra that are otherwise unavailable.One of 24 labelled photos in part album, originating from the Victorian Canoe Club, which had its headquarters in Studley Park, Kew. The album includes a photographic record of canoe construction and also locations in Studley Park and Kew where the canoes were used. The subject of this photograph is identified as 'Built-up ends & deck frames' where the canoe its completed and ready for testing."Built-up ends & deck frames"victorian canoe club, canoe making, river yarra, burke road, mornington, studley park, kew, steaming gear, canoe construction

This magazine was printed and issued in 1951. It is a collection of stories and poems compiled by Plugger Martin and W Gilbert, both late 2AIF.This is an original Digger's Annual Magazine from 1951.An oblong booklet, grey cover and white pages - Digger's Annual, Jubilee Year 1951 - Time Marches On - Tales of Diggers Old and New.The Magazine is compiled by Diggers Plugger Martin and W Gilbert. The Magazine was set up and printed by the Clyde Press, 608 High Street, Thornbury, Victoria.magazine, stories & poems, plugger martin & w gilbert, 2aif, 1951

The house became part of the Coffee Palace. Demolished for Eastland c1968." Written on the back of the sepia photograph, "The centre section of the Coffee Palace was built in front of house, rooms becoming dining rooms. (T. Grant). 1908".Written beneath black and white photograph, "Home of Tommy Grant before the Coffee Palace was built in front of it. The house became part of the Coffee Palace. Demolished for Eastland c1968." Written on the back of the sepia photograph, "The centre section of the Coffee Palace was built in front of house, rooms becoming dining rooms. (T. Grant). 1908".

Instruction - 1 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "K35JJ, K35 AA2, RC1, RC2, EECK1 (Clyde) controller maintenance - Tradesman's assistant procedures" Details electrical work to be done on the rostered day in for the work to be carried out assisting the Electrical Mechanic on his work, including lubrication. Dated May 1970.trams, tramways, depot, safety, workshops, electrical equipment, instructions, procedures, controllers

The Shire of Grenville offices in Linton were built n in 1939, and replaced the original Shire Hall which was built in the 1860s. At the time the offices were built, Linton was the headquarters of the Shire of Grenville. The Shire of Grenville ceased to exist in 1993 following municipal amalgamations, and the offices are now the Linton offices of the Golden Plains Shire which has its headquarters at Bannockburn.Colour photograph showing a single-storey cream brick building, with a flagpole and various memorials outside it. Golden Plains Shire offices in Linton (formerly Shire of Grenville offices), built 1939.shire of grenville offices linton, golden plains shire offices linton

Original Anglican church built in Buninyong in 1857 used as a school, church hall and Sunday school at various times, renovated circa 1990Earliest Church built in Buninyong and used in various religious and educational capacities since 1857.Black and white photograph of the side of the first brick Church of England built in 1857 in Scott Street now used as church hall. Chimney is clearly visible in the centre of the rear wall.church of england, first church, religion

Original Anglican church built in Buninyong in 1857 used as a school, church hall and Sunday school at various times, renovated circa 1990Earliest Church built in Buninyong and used in various religious and educational capacities since 1857.Black and white photograph of the rear of the first brick Church of England built in 1857 in Scott Street now used as church hall. Front view, tennis court visible on left.church of england, first church, religion

Written on back of photograph, "Library being built".