Showing 503 items matching consumerism
-
Kiewa Valley Historical Society
Bottle Milk, mid to late 1900's
This glass milk bottle was manufactured and used mid 1800's (1834 Victorian dairy industry was founded) to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the large volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36"This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against sunlight penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it 6/33 and next to this "ONE PINT" and under this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "4"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles -
Kiewa Valley Historical Society
Bottle Milk, circa mid to late 1900's
This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under house at 1 Beauty Ave., Mt Beauty.This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head was manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle which contained milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/18" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "3"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles -
Kiewa Valley Historical Society
Bottle Milk, mid to late 1900's
This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under house at 1 Beauty Ave., Mt Beauty.This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottle along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/36" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "15" glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles -
Kiewa Valley Historical Society
Bottle Milk, mid to late 1900's
This glass milk bottle was manufactured and used mid to late1900's (1834 Victorian dairy industry was founded) up until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/18" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "4"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles -
Kiewa Valley Historical Society
Bottle Milk, mid to late 1900's
This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottle along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a half pint capacity and is made from "clear" glass. There are other milk bottles that have a "green" tint in them and this tint was to protect the contents from sun damage. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the top half of this bottle is "MILK" and opposite "HALF PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base is "2 M" underneath this "8/11" and underneath is "ISM -169"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles -
Vision Australia
Audio (item) - Sound recording, Royal Victorian Institute for the Blind, Around the Institute: September 18, 2001
Around the Institute was a weekly program designed to keep clients and staff informed of events, activities and thoughts relating to low vision and blindness. It consisted of interviews undertaken by Jo Matthews, with sound engineer Ed Gamble, designed to inform, educate and explore on a variety of topics. September 18: Visiting teacher role – Sherry Cunningham, ATI Consumer Committee – Len Carmalotti, Blind cricket – Tim Mitchell.royal victorian institute for the blind, radio shows -
Kiewa Valley Historical Society
Polisher Floor, Hoover Appliances, Meadowbank
This appliance was a time saving method of cleaning floors. It appeared at a time (after World War II) when the domestic pressures faced by mothers and domestic staff was on the increase. The necessary "working parents" was through necessity becoming part of the "typical" family environment. It was the start of the ever increasing demand, from an economical reason, for both parents to work outside their property. Historically the period of the 1950s was one of extreme changes. It was an era where established role models were under pressure from an ever increasing demand for new and advancing consumerism. Communication levels via radio, newspapers and television was expanding at an ever increasing rate. Relatively isolated rural areas were opening up (post war) to foreign ideologies of consumerism. The basic restraints of "this will be alright mate, she'll do" was under a slow but effective take over. "I can get this done faster by this new whiz bang gadget that I saw on the TV last night!" was the new way to live by.This item is very significant in that it demonstrates the new consumerism at its infant stage of the social changes occurring due to greater communication levels between the rural Australian communities and other advancing communities world wide. The Kiewa Valley residents (mainly from the intermingling of rural and post World War II refugees working at the construction of the Victorian Hydro electricity installations, resulted in this rural area becoming integrated to new ways of living (both socially and economically). Once the attitude of "we have always done it this way mate!" was challenged and overcome, the acceptance of new time saving "gadgets" which started to pour in from foreign markets, the relative isolation of the Kiewa Valley (being mainly psychological entrenched), was over.This hoover electric floor scrubber and polisher has a main base containing two brushes (can be replaced with polishing pads). The two brushes/pads are fastened or removed from the base unit by pulling/pushing the heads from the small hexagonal shaft on the bottom of the machine motor. A pressure sensitive wire is inlaid at the brush/pad end to hold the brush/pad unit onto the shaft. The discs body and main body covering the electric motor are made from sturdy plastic. The rest of the appliance materials i.e. upright handle and the u framed attaching arm are made from lightweight powder coated steel. A small (350mm) red coloured foot switch protrudes from the back of the motor to release the the upright handle from the storage position to the action position.There are two fork shaped brackets on the rear of the handle, for securing the 6.5 metre long electrical cord and plug. There is no on/off switch on the appliance. A small stainless steel "u" framed clip (for hanging the appliance in the vertical position) for cupboard storage. Within the circle of the cleaning brush is stamped "1 above S.A.B.351" and on the opposite side P/No: 5023792". On the main plastic head of the brush discs are "TO CLEAN" and under this "USE ONLY WARM(underlined) WATER AND SOAP" on the opposite side, and within a circle is the Hoover Trademark. On the front of the blue coloured plastic dome covering the electric motor is (on a raised domed shaped plaque (on a red background) Hoover in slanted print from left to right(in a diagonal level)domestic appliances, floor cleaning, electric floor scrubbers and polishers -
Kiewa Valley Historical Society
Bottle Milk, mid to late 1900's
This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded), until the time that cheaper containers were invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle, to contain milk, required its thickness because of the extensive handling (man and machine) before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle is a circle within it "6/35" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "20"milk, dairy, glass bottle -
Kiewa Valley Historical Society
Scoop metal, no makers identification, circa mid to late 1900's
This scoop was professionally made and well before plastics and aluminium scoops were manufactured. It was in a period when mass production and cheap imports where not common. This item would have been produced well after World War II and before the cheap Asian imports. It was a period in time(the last years) when items such as this scoop were made to last and consumerism was not at the "throw away" mass consumption time of the late 1900's. The rural sector in the Kiewa Valley used this type of "made to last" domestic implement when home made cakes and pastries were commonly made in the household kitchen. Because of the relatively isolation of the valley, bulk supplies of flour, sugar and other cooking ingredients were the required quantity for both domestic household and farm use. Local general stores also had these scoops to provide clients with their required flour, sugar and other bulk loose grains (processed or unprocessed) This lite galvanised rolled steel flour/sugar scoop has a tapered handle extruding from a small cone shaped base. It has a half circle scoop extending from a full circular base which has a small containment ridge which acts as a collection rim. The collection scoop has its front shovel end tapered and rolled edge (outwards) presenting a barrier and air relief when thrust into the flour/sugar. All the edges are rolled and connection links have been soldered. The handle is not of solid steel which accounts for the light weight. The base of the "shovel" is slightly concave to allow gravitational forces to keep the flour centre of mass. The handle has a ridge pressed in the sheet metal at about two thirds up the shaft All metal to metal joins have been pressed and soldered together.loose grains, sugar, millet, nus, nails, loose grocery items. -
Ballarat Tramway Museum
Document, Herald Gravure Printers, 'SEC Progress Review 1959", 1960
A report - possibly to investors about the performance of the State Electricity Commission of Victoria, in 1959. Reports on power production, brown coal production, opening of the Richmond control room, power sales, number of consumers, new power stations - Morwell and Kiewa McKay Creek. Gives Income and profit details. On the last page bottom right hand corner is a paragraph about the financial loss of the Ballarat and Bendigo tramways and the cost of operation per passenger. Yields information about the SEC for 1959 and tramway losses.Two colour folded publication, four sheetssecv, reports, power stations, electricity supply, tramways, finances -
National Wool Museum
Tool - Numnuts Prototypes, Numnuts
Worldwide, more than 100 million lambs are castrated, and their tails are docked each year. Numnuts is a technological innovation to improve animal welfare. It combines traditions with innovation. In the mid-1990s it was scientifically shown that the immense pain felt during castration and tail docking could be significantly reduced with the use of anaesthetic. For the next 15 years, the industry said the cost the welfare devices and development were too high. But todays ethical consumer has demanded that sheep have no more pain. Initiated in Glasgow in 2009, Numnuts took nearly a decade to develop. Here you can see five stages of development, from an early prototype to the Numnuts device farmers use today. Each phase of development took years of on-farm trails to achieve the final product. Today there is even NumOcaine, an approved local anaesthetic used by Numnuts. Using the simple elastrator ring and adding an anaesthetic injector, Numnuts delivers pain relief during tail docking and castration. In the world’s first rubber ring applicator with a pain relief delivery mechanism. Through innovation and consumer pressure the wool industry is going through a moment of rapid change.Four prototype numnuts tools made from white plastic and stainless steel, each in varying stages of production. FInalised version made with black, orange and clear plastics.8097.2 - Mk4 8097.3 - Numnuts Tool V7; 20 10 0 8097.4 - On label - Numnuts NumOcaine 100ml 65 proceeduressheep, tools, castration, innovation, docking -
National Wool Museum
Tool - Numnuts, Numnuts, 2020
Worldwide, more than 100 million lambs are castrated, and their tails are docked each year. Numnuts is a technological innovation to improve animal welfare. It combines traditions with innovation. In the mid-1990s it was scientifically shown that the immense pain felt during castration and tail docking could be significantly reduced with the use of anaesthetic. For the next 15 years, the industry said the cost the welfare devices and development were too high. But todays ethical consumer has demanded that sheep have no more pain. Initiated in Glasgow in 2009, Numnuts took nearly a decade to develop. Here you can see five stages of development, from an early prototype to the Numnuts device farmers use today. Each phase of development took years of on-farm trails to achieve the final product. Today there is even NumOcaine, an approved local anaesthetic used by Numnuts. Using the simple elastrator ring and adding an anaesthetic injector, Numnuts delivers pain relief during tail docking and castration. In the world’s first rubber ring applicator with a pain relief delivery mechanism. Through innovation and consumer pressure the wool industry is going through a moment of rapid change.8098.1 - Numnuts tool made with stainless steel and black, orange and grey plastic. 8098.2 - Glass bottle with orange and grey plastic nozzle containing water for injection. 8098.3 - Yellow plastic case containing 12 stainless steel needles 8098.4 - 10 green plastic elastrator rings 8098.5 - Product cardboard box with the product image on the front8097.2 - on label - For animal treatment only WATER FOR INJECTION 100mL 8097.3 - On case - numnuts 12x Veterinary Hypodermic Needles On needdles - 18G 8097.5 - Numnuts targeted pain relief for tail docking and castrationnumnuts, tools, sheep, castration, docking -
Otway Districts Historical Society
Book, Closed 50 Years Ago. Norman Houghton, 2012
June 2012 represented 50 years since the Colac to Beech Forest to Weeaproinah narrow guage railway was closed. The last goods train ran on 27 June 1962, and the last passenger excursion train on 30 June 1962. The railway was the lifeblood of the West Otways for several decades, enabling farmers and saw millers to bring into economic production the natural wealth of the region. Timber, butter, wool, livestock, potatoes, fodder and minerals flowed out for the benefit of Victorian consumers.Closed 50 years ago. The Colac to Beech Forest narrow guage railway. Commemorative booklet - 30 June 2012. Norman Houghton. Norman Houghton; Geelong (Vic); 2012. iv, 52 p.; illus., maps. Soft cover.colac; beech forest; weeaproinah; railway; -
Kiewa Valley Historical Society
Container Tin Cylindrical
This item was produced by a Melbourne Tea, Coffee and Cocoa Merchant importers(1898-1960). It was a time when local production of, coffee had yet not begun. Imports from India and the Asian region had dominance in the market place. The blending of coffee with chicory was a cheaper method of providing a flavour enriched drink which was marketed as "containing not less than 55 parts per cent by weight of coffee" The coffee weighed heavier than the chicory. This was a time before strict accurate consumer information/content became mandatory and legally enforceable.This empty container of "Sunbeam" Coffee and Chicory finely ground "instant - just add boiling water" beverage was the start of the "fast" breakfast drink. The use of grinding the coffee beans and percolation to obtain the final drink was at the start of the rural sector's decreasing the time for casual drinking. The once casual countryside psyche was now (mid to late 1900's) becoming more "on the go".This cylindrical container (coffee and chicory) is constructed from pressed cardboard with both ends enclosed by tin(pressed) lid and bottom. The outside wrapping is promotional and descriptive in the colours of purple background and information label areas with purple lettering on a white and silver background. The cylinder is made from 2 mm pressed cardboard.Main label " No.1" underneath "Sunbeam" underneath "COFFEE and CHICORY" UNDERNEATH "Containing Not Less than %% Parts Per Cent By Weight of Coffee" underneath in Hand Writing" Griffiths Bros Limited", below this "TEA ,COFFEE & COCOA MERCHANTS" Below this" Mellbourne, Sydney, Adelaide" and lastly "net 1lb weight". Alternate side "The Following Well Known Economical & Flavoury Teas" underneath this "Packed Specially For The Trade" underneath "SUNBEAM & VICTORY SIGNAL COCOA" and in smaller print "Absolutely Pure, Made in Australia" underneath Equal To The Best Imported"breakfast containers, food storage, instant coffee, speed breakfasts, domestic -
Kiewa Valley Historical Society
Tin Tea Pyramids Blend, early 1900's
This early 1900's tin which contained loose leaf blended tea was imported into Australia by those tea merchants who wanted to provide the Australian tea drinkers with quality tea. It could well be early Lipton distributors to both city and rural clients and consumers. This was in a period when most rural families were heavy tea drinkers. It was well before the introduction of coffee as a drink (especially instant) for the early morning, after meals and general "drink any time" pick me up beverage.This relatively large tea tin marks a period in time when loose leaf tea was in great demand and large quantities were not only used by families but also restaurants, workers mess halls and remote large rural families. The ability to obtain a quick tea supply in semi remote rural areas such as the Kiewa Valley was not possible due to the factors of all weather road access and the economics of traders going out of their way. Stocking up with important beverages, such as tea, was a "one of those things" that early rural communities had to endure with. Bulk storage tins such as this item were not only a requirement but also offered storage for other household items. This usefulness was not overlooked by the "canny" rural family.This large metal tin container was specifically manufactured for the kitchens requiring a bulk storage "bin" type of loose leaf tea content. When emptied, it could also be used as a general kitchen storage container for other bulk consumables.On the front side and in the background, there are three sketches of Egyptian pyramids(increasing in size from left to right). At the forefront there is a camel "train" loaded with supplies and handlers, making their way over the sandy desert going towards a large sign(in a freehand script) "PYRAMIDS BLEND". The left side "Specially Selected" and underneath "PURE TEAS" below this and within a circle is the figure of a Geisha clad of Asian appearance (with a fan in a raised hand with boxes(of varying sizes) around her. All these are in (off white design and wording on a green background. On the back in green print on off white background "PYRAMIDS BLEND" and underneath "OF SPECIALLY SELECTED PURE TEAS". On either side are columns of similar print. To the left "THESE UNRIVALLED BLENDS ARE GUARANTEED TO CONTAIN ONLY PURE TEAS".To the right "SPECIALLY SELECTED FROM THE CHOICE GROWTHS OF CHINA INDIAN & CEYLON". Below both columns is "for delicacy & fragrance of flavor, combined with great strength, and are confidently recommended to the public as the best values in teas obtainable" On the last side is a sketch of an " Indian encircled, holding a staph with palm trees in the background and four tea containers on his left, with "PYRAMID BLEND" as a subject heading. There are two Oxen pulling a two wheeled cart with a load of six large boxes. On lid and barely readable "FIVE POUNDS NET"loose leaf tea containers, food storage tins, kitchen tidies -
City of Ballarat
Artwork, other - Public Artwork, Bridget Hellier, Outrospective by Bridget Hellier, 2012
This whimsical sculpture high on the wall in a narrow lane uses woven wire patterns to lift the view beyond and to the sky. The artwork is of aesthetic significance to the people of BallaratWire sculpture attached to wallOUTROSPECTIVE/ Artist: Bridget Hellier/ This work is inspired by it's setting. Walking through a shopping mall it is easy to become immersed in consumerism and material things. I have tried to create a link between the urban and the natural world. Walking through the area I couldn't find many references to nature. The organic shapes that "grow" out of the wall to attempt to serve as a reference - reminding us of what once was./ Officially opened by Cr Des Hudson 7 December 2011./ Commissioned by the Public Art Advisory Committee on behalf of the City of Ballarat./ City of Ballarat logooutrospective, bridget hellier -
Beechworth RSL Sub-Branch
Equipment - Combat Ration One Man, January 2021
Australian Defence Force - Combat Ration One Man used by members of the ADF on active duty in the field. In the collection they have a limited shelf lifeCombat Ration One ManCRIM Lot: 19.12.2018 / E (indicating menu E / Safety warning in Text box - CAUTION - FOOD ALLERGIES / This ration pack has NOT been constituted for consumers/ with any food allergy or special dietary requirements / Products used in ration packs may contain nuts, free nuts / cereals containing gluten, soy, fish, milk, egg crustaceans / sesame seeds and their products and/or added sulphites / Check the Ingredient List in the Information Sheet and or/product label before consumption. If you have any doubts / about the contents , you should not consume the ration pack. NOT FOR PRIVATE SALE TO PUBLIC -
National Communication Museum
Equipment - Ericofon, Ericsson, 1950s
The Ericofon was the first commercially successful telephone which incorporated both handle and dial within a single unit. Manufactured by the Swedish company Ericsson, and available for lease from the Postmaster-General’s Department, the streamlined design has been praised for anticipating the cordless phone, and later mobile phone, by several decades. The ‘cobra’ design was formulated in the 1940s and manufactured in the 1950s; Australian cases were likely made in the L M Ericsson Broadmeadows factory. Although new thermoplastic technology allowed for a bolder aesthetic than traditional black Bakelite telephones, Ericofon sales accounted for only 4% of the market and it never enjoyed popularity with Australian subscribers. The design did, however, spark a conceptual shift whereby the telephone “was seen more as a consumer product than merely an extension of telephony” (Ericsson).Clear plastic telephone casing inside which are coloured electrical wires. Telephone has a broad base that contains the dial, mouthpiece and cord with cream plastic coated wall plug attached at rear. Handle tapers in a curve to a stylised squared earpiece. Dial underneath is a rotary dial with red disconnection button in the centre. telephone, design, domestic, ericsson, industrial design -
Vision Australia
Administrative record - Text, Braille and Talking Book Library Annual Report 1991: the tradition continues, 1991
Annual report of the Braille & Talking Book Library including Minutes of the AGM, Board of Director's Report, President's report and financial statements. Items also included are: inability to merge with RVIB and ratified agreement to merge with Association for the Blind, 21st year of fundraising of the Benalla Auxiliary, low morale and productivity prior to merger, ongoing issue with staff turnover, continued delays with computer system and decision to purchase Urica system, toll free number for borrowers as well as advisory groups introduced to insure Library remains consumer focused, Rose Blustein appointed Chief Librarian, automated circulation system introduced which has decreased backlog in processing mailbags, and the Braille and Talking Book Library ceased trading 4 October 1990 due to the merge.1 volume of text and illustrationsbraille and talking book library, annual report -
Wodonga & District Historical Society Inc
Functional object - Transistor Radios, Sanyo Electric Co. Pty. Ltd, 1970s
The first transistor radio (the Regency TR-1) was produced by Regency Electronics in cooperation with Texas Instruments in 1954. Transistor 4 , the AWA transistor radio was manufactured by Amalgamated Wireless Australasia Limited (AWA), Australia's largest and most prominent twentieth century producer of radios, televisions, audio and telecommunications equipment. Transistor radios went on to become the most popular electronic communication device of the 1960s and 1970s. Billions of transistor radios are estimated to have been sold worldwide between the 1950s and 2012. They were exceptionally popular amongst young people in Australia due to their portability, allowing them to be taken wherever you wanted to gather with friends or, due to the headphone attachment, without disturbing those around you. These pocket radios are representative of technological developments which had a vast influence on social life and activities throughout Australia.4 pocket transistor radios of various brands. No. 1 orange Sanyo RP 1280 manufactured in 1979/1980. No2. is white bakelite No. 2 K--181 pocket transistor made by the Kmart Corporation c1975 and No. 3 is a Nation Brand AM Portable Receiver made in Hong Kong c1980. No. 4 Is an AWA Radiola B121 Solid State pocket transistor. All of them include a socket to plug in an ear piece.No. 1 on the front "SANYO RP 1280 and tuning dial. On the back: "SANYO MODEL RP 1280/ DC 3 V 2 x "AA" BATTERY/ SANYO ELECTRIC CO. LTD." No. 2 on the front "K-181" and tuning dial. On the back "Code 600-857/ AM POCKET RADIO/DC-3VC (UM-3x2)/ART 181. HONG KONG" No. 3 AM Portable Receiver Nation Brand on front No 4. on the front: below dial - AWA Radiola B121 ad at bottom "SOLID STATE" On the back: AWA Thorn Consumer Products Pty. Ltd./Model No. B121/Batteries 2 x UM-3 OR AA Cells/AM 520 -1620KHz/ Serial No. 75686/ Made in Hong Kong"radio communications, transistor radio -
Melbourne Tram Museum
Negative, Wal Larsen, 1949
Black and white negative, of SW2 565 (St Kilda Beach) on the Moreland Road stub at Brunswick/Coburg. Has the tracks to Brunswick Depot in the background. On the side of the tram is a sign "Save to help control prices" Photo not in Wal Jack Melbourne album. Neg was in a Bright Methodist Church offering envelope - stored with negative file - has 1949 in pencil on the envelope. Wal Larsen was a Bright resident. Note on the background to the sign: Norman Abjorensen wrote in The Canberra Times about the election of Menzies in 1949 - see https://www.canberratimes.com.au/story/6532529/the-election-which-shaped-australia-for-decades/ (Accessed 9-6-2021): Not known how the sign was sponsored. "The uncertainty was magnified by a range of post-war concerns and expectations that the expansionary 1949 budget brought into sharp focus. The nation was still war-weary, tired of austerity and impatient with rationing and controls; people wanted to spend their accumulated savings on the new household goods starting to appear in stores, and the taxation burden was resented. Further, rising inflation was a problem, with the Consumer Price Index rising by more than 10 per cent in 1949. It was little wonder Menzies' pledges to end rationing and "put value back in the pound" fell on such eagerly receptive ears."trams, tramways, w2 class, moreland road, tram 556 -
The Beechworth Burke Museum
Photograph, Between 1946 and 1961
Elgin Shoes Pty., Ltd., established a branch shoe factory in Beechworth in 1946. Managing director, Mr T Nagle Pitman, selected Beechworth as a suitable location for the factory due to the availability of labour in the town, particularly girls under sixteen years of age. At its peak, the shoe factory employed thirty six women and girls, which also included post-war migrants. After the Second World War, Australia admitted increasing numbers of immigrants in order to fulfil labour requirements for a rapidly inflating demand of consumer goods. These migrants were largely from European Countries in line with the ‘White Australia Policy’. In 1954 Beechworth had 170 migrants from the UK, 102 from Hungary, and 63 from Germany. The factory closed in 1961 as increased centralisation of both populations and industry in the larger nearby towns of Wangaratta and Wodonga lead to the closure of many factories in small towns in the 1960s and 1970s. This photograph is historically significant as it shows the working conditions in a factory primarily staffed by women at some point between the late 1940s and early 1960s. Sepia rectangular photograph printed on matte photographic paperReverse: 14 / AFGA / 6982 / pitman shoe factory, elgin shoe company, industry, shoe factory, shoemaking, working women, post-war migration, factory, white australia policy, mid-twentieth century women's working conditions, twentieth-century working conditions, pitman, elgin, shoe, sewing machine, leather, pittman -
Flagstaff Hill Maritime Museum and Village
Container - Brown paper shopping bag from Adda & Co. Paris, c. early 20th century
Adda & Co operated a business at 52 Boulevard Haussmann, Paris.The store sold crocheted silks, furs and hides. History of shopping bags: Before the late 1800s, shopping bags didn’t exist. Shoppers would either carry their goods home in baskets, or have the merchant deliver them to people's homes, until 1852 when Francis Wolle, a schoolteacher in Pennsylvania, invented a machine to produce paper shopping bags. This invention would allow customers to carry items home in disposable paper bags. Soon after, owners of department stores and retailers began to realise that paper shopping bags could be used to help market their brands, and as such custom shopping bags with printed logos became common place. Carrying a shopping bag from certain shops became a type of status symbol for consumers, providing evidence that one was well-off, had good taste, or both.The paper shopping bag is a rare survival of ephemera related to a retail store called Adda &Co that operated at 52 Boulevard Haussmann, Paris. The arrival of waves of more than ten million migrants by boat is one of the major themes in Australia’s history. The paper shopping bag is representative of personal items purchased for migrant journeys as markers of domesticity, warmth and making oneself at home in a new land that speaks of the transnational lives embedded in threads of migration.A brown paper shopping bag with a printed logo and store information in black inkparis, department store, shopping, adda & co, flagstaff hill, maritime museum -
Ballarat Tramway Museum
Book, State Electricity Commission of Victoria (SECV), "Instruction for the Guidance of Employees working on or within reach of Live Low Voltage Conductors", 1949
Booklet with blue Rexene cover and round corners on heavy card with sheet of paper glued on inside of covers and 32 printed pages stapled with in, titled "Instruction for the Guidance of Employees working on or within reach of Live Low Voltage Conductors". Also possibly known as the "L.V. Blue Book" - see top of definitions page. Dated 1949. Above title has name of the organisation - SECV - Electricity Supply Department. Inside front cover has space to record name and occupation of person issued to. In bottom left hand corner has form number "596-210 R2" Has been stamped "L. J. Denmead" by a hand stamped in blue ink and words "Departmental Tramway Supt." written in using blue ink. See image file 1854i2.jpg Book details procedure and rules for SEC employees working on or near low voltage conductors or Powerlines. Covers general matters, authorised employees, work on low voltage overhead lines, moving a conductor near live wires, public lighting, radio and carrier circuits, batteries, portable equipment, metering work on consumer premises, and definitions. Consists of 32 pages sheets of paper, printed and folded with one staple centrally and then stapled into the covers with paper inside pasted onto cover. Contents pages are not numbered. Covers blocked in blackSee issuing details above. On front cover in blue ink "L. J. Denmead / D. T. Supt"trams, tramways, sec, power lines, linesman, safety -
Kiewa Valley Historical Society
Jar/ Demi John Stone Ware, Circa 1860
This kiln glazed container for liquid's, was the type used in the 1700's to mid 1900's to contain fluids mainly for human consumption which needed to retain liquid that could be affected by sunlight and or required to be maintained at a cooler temperatures. Ginger beer and other "brews" for human consumption were the prime target. The ability to refill these vessels were of the utmost importance to the consumer. Over time these containers were reduced in size and produced for "special" liquids e.g. alcoholic Port. This Demi John stone ware was manufactured in Tamworth (England) and imported into Australia during a period when the majority of "quality" domestic items were sourced from "the Mother Country" and the ties between the still "colonial" outpost were very strong. This bondage remained longer in rural communities than in the cities. The "multi-culturalism of the post World War II era resulted in the lessening of the earlier ties. The growing of nationalism, the Aussie evolution, was brought about by the increased social and business/commercial interactions between Australia and the United States of America, post World War II.This container(jug) is very significant to the Kiewa Valley, a rural region that required these type of liquid storage vessels, especially in the late 1800's to the mid 1900's. These were times when household refrigeration, if available, would be from the "block ice" coolers or "cool" storage nooks and crannies within farmhouse locations.This large "stone ware" glazed Demi John, alias Carboy has a capacity of over 20 litres. It has a conical smooth lipped neck top with a wide, flat(three to four finger) carry and poring handle. The top third portion of the jug is caramel in colour and the bottom a darker cream. It has a manufacturer's seal stamped into the surface before glazing. This item would have been corked and then sealed (air tight) with wax.manufacturer's seal "GEORGE SKEY WILNECOTE TAMWORTH"household liquid jar container, 1800's food storage, kiln fired glazed pottery -
Parks Victoria - Wilsons Promontory Lightstation
Bottles
The catalogue includes twenty-one diverse types of bottles ranging from beer, soft drink and chutney bottles to bottles designed to hold perfume, medicines and poisons. They appear to range in date from the nineteenth to c.mid-twentieth centuries and represent various types of mass-produced consumer goods that were commonly available at the time. The five different types of bottles included in 0156.5 are made of clear glass with tapered necks and narrow openings to facilitate pouring. One can be positively identified as an imported mineral soda water/soft drink bottle because of the marble stopper in the neck and thickness of the glass. The globe-stopper bottle, also known as a ‘Codd’ bottle, was invented by English engineer, Hiram Codd in 1873 for holding gaseous soft drinks. The thick glass could withstand the pressure of the contents as well as repeated bottling by manufacturers. The bottles were probably used by former lightkeeper households. and tapered, narrow necks. The older ‘porter’ has a slightly bulbous neck. The bottles were probably used by former lightkeeper residents. Five glass bottles. Four are clear glass and one has coloured to green. -
Kiewa Valley Historical Society
Typewriter Mechanical Portable, 1950s
The Olivetti company was founded in Italy in 1908.This particular typewriter is a Olivetti Lettera 22, oblique front stroke and portable manufactured after 1950. The 1950s and 1960s was a time when British manufactured goods were still purchased by many Australian consumers. The later 1960s onwards, there was a shift, mainly in the cities, to European made goods. The invasion of Japanese manufactured goods was relatively slower, especially in rural areas. The demand for long lasted and dependable merchandise was in the rural area still the most important criteria. The ease of setting up this typewriter and its compact mobility was its major benefit to trades people and travelling professionals, e.g. rural doctors, other medical professionals, accountants, lawyers and educators. This item facilitated the growing numbers of professional nomads requiring a relatively light office stationery package e.g. travelling novelist, writer, businessman and academics. This typewriter needed no electrical or battery power to operate it. Outback Australia, where at this point in time, was still relatively isolated from a good available electrical power reticulation and battery power, and therefore could not be totally measured as a highly efficient office environment.Although this typewriter was purchased from a business in Penrith, Sydney, N.S.W., it is significant that it travelled easily to the Kiewa Valley, demonstrating the mobility of certain sections of the community. This typewriter was designed by an Italian industrial designer, Marcello Nizzoli, in line with the art deco style of the 1930s and the colour and flexibility of the vibrant 1950s. The underlying theme of manufacturing in the 1950s was to produce equipment that was more efficient than what was inherited from the earlier period of 20th century. Improvements were made to this Olivetti typewriter by Giuseppe Beccio by reducing the number of parts made from 3,000 to 2,000. This reduction of parts and therefore cost of production was the major principle of the Japanese manufacturing juggernauts of the post World War II era. Efficiency and low costs material was becoming prime factors in the success of rural industries from the 1960s. Competition from overseas producers was starting to affect rural industries and the removal of the large range of tariff protection, especially rural products, required not only a shift of farm management but a more efficient cost savings modus operandi. This Olivetti Lettera 22, oblique front stroke portable (weighs 4kg) mechanical typewriter has a coral coloured plastic casing. The keys are made of black hardened plastic with white lettering, numbers and symbols (imperial fractions, and pound). It has a QWERTY keyboard as opposed to the Italian QZERTY. It has a lever to move the ribbon between black, neutral (for mimeograph stencils)and red colours (a red key is provided for highlighting specific words,letters or symbols) . This machine is fitted with only a black ribbon. It has a black rubber paper rollers and chromed metal parts on the carriage way. It has four rubber feet underneath the main body. On the left side of the roller there is a lever to adjust the roller from fixed (when mobile) through 1,2 and 3 line space gradients. This model has a key for zero but not one for the number one (uppercase letter l is used) see KVHS 0459 for the carrying bag.On the cover over the ribbon wheels letter strikers has a plate marked "Lettera 22" and the back plate behind the paper roller and in front of the paper supports has a silver metal label marked "olivetti made in great britain".commercial, mobile office equipment, mechanical typewriter -
Melbourne Tram Museum
Ephemera - Personal Papers in a Benson & Hedges tin, 1950s
Allan Yoemans was a tramway employee at Preston depot. Receipts contained within the Benson and Hedges tin of the early 1950s noting it is by appointment to HM King George V are: 1 - Receipt for a ladies cycle - 9 pounds - dated 2/11/1957 2 - MMTB clothing docket for a coat - size 6 3 - Receipt on MMTB letterhead and docket - payment of Tramway Benefit Society subscription - dated 3/12/1956 - received at Preston Revenue office 4 - Receipt for 170 pounds - payment for a Chev sedan car with a Victorian 3d duty stamp, dated 13-4-53 5 - Receipt for payment of 4/6, Ezyart Co of Reservoir showing a balance of 1pound and 10 shillings - hire purchase? - dated 21/9/1950 6 - Receipt from Bruce Small Pty Ltd for payment of 15 pounds, a/c Bicycle finance - with a Victorian 2d duty stamp, dated 8/4/1952 7 - Interim receipt for 5 pounds from the Lalor Consumer Co-op dated 26-9-1950 At the time Mr Yoemans lived in Gratwick St Lalor.Shows business practices of the early 1950s and the way payments such as hire purchase could be made and receipted, including payments to the Tramway Benefit Society.Metal tin or cigarette container - red for 20 Benson & Hedges cigarettes containing 7 paper receipts or dockets.tramway benefit society, tbs, receipts, financial records, tramway employee -
City of Greater Bendigo - Civic Collection
Instrument - Weights and Measures, Troy Weight Set, c 1865
Troy weight is a system of units of mass from an unknown origin. While the name Troi is believed to have come from Troyes in the north east of France the system used primarily in the precious metals industry and adopted in Australia originated in 15th century England. Troy weight units are the 'grain' and 'pennyweight' (24 grains), the troy ounce (20 pennyweights), and the troy pound (12 troy ounces). One troy ounce equals 31.1034768 grams. The troy ounce and grain were also part of the apothecaries' system and was long used in medicine, but has now been largely replaced by the metric system (milligrams). When the Weights and Measures Act was passed in Victoria in 1862 local inspectors were established throughout the colony to ensure accuracy particularly in the weighing of gold. By the 1870's each local council had a set of standards that were used to test the scales, weights and measures of local merchants and businesses. This set would have been de commissioned some time after 1947 and was offered back to the Borough of Eaglehawk in 1989. Hinged, lockable wooden box with brass handle, hinges, latches and lock. Remnant wax on front face of box above and below lock. Interior of box is lined with purple velvet which is worn in several places. Box houses nine troy weights ranging in size from 100oz Troy to 2oz Troy. 1oz Troy is missing. Accompanying set is a two page letter from Weights and Measures Branch of Consumer Affairs offering set back to the Borough of Eaglehawk in 1989. Troy Weights: Part a) 100oz Weight, 68 mm Diameter at base x 113 mm H b) 50 oz Weight, 53 mm D x 90 mm H c) 30 oz Weight, 45 mm D x 77 mm H d) 20 oz Weight, 39 mm D x 65 mm H e) 16 oz Weight, 37 mm D x 60 mm H f) 8 oz Weight, 30 mm D x 47 mm H g) 4 oz Weight, 24mm D x 36 mm H h) 2 oz Weight, 19mm D x 28 mm H i) 1oz missing Hinged Wooden Box: Part j)171 mm H x 300mm W x 196 mm D Typed two page letter: Part k) 295 mm H x 210 mm W x 1 mm Top Troy: Each Troy weight stamped with small symbol made up of the number 5, an image of a crown and the word STANDARD. Side Troy : Each Troy weight stamped with small symbol made up of the number 5, an image of a crown and the word STANDARD above a series of date stamps recording every time the weight was tested. Date stamps: 30.4.1866; 16.9.81, 30 12.86; 1.2.92; 10.5.97; 15.1.04; 10.2.09; 17.12.14; 20.4.20; 29.9.25; 23.1.31; 18.6.36; 14.7.41: 11.7.47 Exterior Top of Box: Remnant of paper pasted to wood. Faint printed text 'ON HIS MAJESTY'S SERVICE'.borough of eaglehawk, making a nation exhibition, city of greater bendigo commerce -
Wodonga & District Historical Society Inc
Book - Let's Have Water - A history of the Fish River Water Supply, Robin McLachlan, Denis Barrett, Jack Domis, Nick Welling, 1997
A history of the development of the management of the Fish River Water Supply Scheme in Central NSW. The scheme extends across the local government areas of the Shire of Oberon, the City of Lithgow and the City of the Blue Mountains.non-fictionA history of the development of the management of the Fish River Water Supply Scheme in Central NSW. The scheme extends across the local government areas of the Shire of Oberon, the City of Lithgow and the City of the Blue Mountains.water nsw, fish river region nsw, oberon dam, water resources development nsw australia