(a) Note by T.H. Kneen, "Interested observors are: Joseph Cade (Agrostology Branch), Rosemary Hamley 1951, Alison Howie 1951, students, one not identifiable. (b) Note by T.H. Kneen 8 April 1992, "The operator is George Manley - note the equipment - crow bar, crosscut saw, axe, sledgehammer, power driven crosscut saw."Black and white photograph. (a) Huge root ball with 4 people standing beside it. (b) Man working on large trunk of fallen tree. Chainsaw on wheels stuck? in the tree trunk, man holding a sledgehammer.(c) George Manley (Stockman) standing beside root ball.root ball, joseph cade, agrostology branch, rosemary hamley, alison howie, students, george manley, crow bar, crosscut saw, axe, sledgehammer, stockman, cypress tree, power driven crosscut saw

The photo shows a woodchopping competition in an unknown location in the Grampians. The identity of the people in the photo is unknown.The photo shows a large group of men standing in a clearing, around a cut log. One man has his foot on the log and is holding an axe and a crow bar which are lodged in the log. There is a man holding a book standing on a rock in the centre.recreation, woodchopping competition

The photo shows a woodchopping competition in an unknown location in the Grampians. The identity of the people in the photo is unknown.The photo shows a large group of men standing in a clearing , around a cut log with a crow bar lodged in it. Other similar logs lie around the clearing. Many of the men are holding axes. There is a woman in a large hat standing beside a post in the right foreground and a man standing on a rock or log behind her with a pipe in his mouth.recreation, woodchopping competition

Chelsea Football Ground, Fence erection, working bee for the Chelsea Football Club. Group L/H - Tom Robinson, (wearing white apron) Les Green, Roy Beardsworth ( Mayor , 1930,.31,38,39.) Bill Barfoot, Bill Fricke, Jim Smith. Mattock in foreground, blue stone bricks, crow bar because soil was soil so hard.Black and white photo mounted on cardboard. chelsea football ground, erecting fence, les green, roy beardsworh, bill barfoot, bill fricke

Light Rail Bender Most rails are produced straight. While they to easily bend and appear flexible, they are required to bend for some curves, at rail joins on curves and at point (turn-out) junctions. For a safe transition around curves and in the finer areas of the point, this use to be done with a manual rail bender. Sometimes referred to as a Buddah, the rail bender attaches its two claws to the rail. In the middle of the two claws is a screw that is slowly tightened using a crow-bar to bend the rail. Tightening the screw too fast or too tightly may not give the structure of the rail time to redistribute and the rail may break if not done properly. Historic - Railways Permanent Way and Works - track equipment - Light Rail Bender Light Rail Bender made out of cast wrought ironpuffing billy, light rail bender

Railway tracks are produced straight. They may appear to be easy to bend and may appear flexible, but are required to be bent for curves, at rail joins on curves and at point (turn-out) junctions. For a safe transition around curves and in the finer areas of the point, this was required to be done with a manual rail bender. Sometimes referred to as a Jim Crow, the rail bender attaches its two claws to the rail. In the middle of the two claws is a screw that is slowly tightened using a crow-bar to bend the rail. Tightening the screw too fast or too tightly may not give the structure of the rail time to redistribute and the rail may break if not done properly.Victorian Railways Permanent Way and Works track equipment Light Rail Bender narrow GaugeCast iron semi-circular tool, with hooked ends and central screw shaft.puffing billy, rail bender, jim crow

As quoted from Wikipedia, ‘An anvil is a block with a hard surface on which another object is, struck. The block is as massive as it is practical, because the higher the inertia of the anvil, the more efficiently it causes the energy of the striking tool to be transferred to the work piece’. The lightstation’s anvil is a red-painted iron block with a conical beak or horn at one end that was used for hammering curved pieces of metal. It would have stood on a heavy free-standing pedestal, such as a large tree stump, to allow complete access to the item being hammered. Some anvils display the manufacturer’s name in the metal on the side, but this is not the case here, and its age, although unknown appears to be quite old, perhaps c.1900. It appears to have had a lot of use, and although no record of this survives, it is presumed that a forge operated on site for hammering, cutting, shaping and repairing tools such as bolts, nails, hooks, chain segments, pulley blocks, hinges, crow bars, picks, chisels, horseshoes and harness hardware. A hames hook (which forms part of the collar worn by a draught horse) survives at the lightstation as do many other heavy metal tools and pieces of equipment. The anvil is an example of the necessary resourcefulness and self sufficiency practiced by lightkeepers working and living in a remotely located workplace and home, and many of the iron items in the collection may have been repaired or even made on its working surface. As a lightstation manager Chris Richter used the anvil to manufacture pulley blocks for sash windows, repair brass door hinges & sharpen cold chisels, crowbars and picks and other lightkeepers have used this anvil for many fabricating jobs such as manufacturing ducting for the generator room ventilation system."The lightship only came in every three months with supplies and there would have been repairs to do between visits from a blacksmith - who would have had to travel on the ship. Also, the ship was only anchored in the bay long enough to unload supplies and collect and deliver lightkeeping staff – probably not enough time to get much smithy work done – especially if the weather packed it in and the ship had to depart. Lightkeepers in our time had to be self sufficient, resourceful and innovative and I imagine that would have been the case in the past." It has second level contributory significance.Red painted blacksmith's anvil.

Set of six Agfa colour blue white plastic mount slides, photo by Keith Caldwell of trams passing the intersection of Flinders and Swanston St. Slides undated - c1967/68, possibly 3/68, aligns with similar scene and time on Reg Item 4315 .1 - W4 670 crossing Flinders St with both the driver and conductor in the view. Has destination of Hanna St. .2 - L102 crossing route 61 to South Caulfield Junction. Has adverts for Tolley's Brandy and a fast courier. In the background is SW6 940 (University 2A) and W2 389? (East Malvern, route 4D) .3 - W3 668 to South Melbourne Beach, route 1 .4 - W3 669, route 1 to South Melbourne Beach, has advert for White Crow sauce. .5 - W2 627, North Balwyn with other trams at the Swanston St stop, including a SW6 on route 64 .6 - a long line up of up to 9 trams northbound at the Swanston St stop outside Flinders St Station, led by SW6 917 (University, route 64) with adverts Suptuned, Sony and "take my advice" featuring an owl. Following is another SW6, 913? with adverts for Tiger Paw, also a route 64. In the background is the Flinders St station awing with a Craven Filer cigarette advert.. Photos have Young and Jackson, the Classic Restaurant Coffee lounge bar in the view, Coles,.1 - "BXBU" and on .3, .1 also has W4" in ink.trams, tramways, flinders st, swanston st, w4 class, w3 class, l class, sw6 class, w2 class, hanna st, south caulfield, university, route 2a, route 4d, east malvern, st kilda beach, route 1, route 64, north balwyn, tram 670, tram 102, tram 668, tram 669, tram 627, tram 913