This bank cheque originated from the Bank of Australasia, Melbourne branch. It was issued on 3rd December 1885 to a person surnamed Slater for £71.11.5 (seventy-one pounds, eleven shillings and five pence). The parallel lines are called Cheque Crossed and mean that only Slater and no one else could receive the payment and that it would have been paid into Slater's bank account, not exchanged for cash. The embossed dots signify that the cheque amount was also paid to be the bearer of the cheque. Slater would have visited the bank to deposit the money into his or her own account. The cheque was printed by Sands & McDougall, a long-standing Melbourne printing and stationery company. It was then Stamped at the bank with its own unique number before it was issued to the customer. From its previously perforated edges, it is presumed that the cheque was part of a page of cheques, likely to be contained within a book of similar cheques ready for use. The Bank of Australia was incorporated by Royal Charter of England in March 1834. It had its Australian beginnings on 14th December 1835, opening in Sydney. The Acting Superintendent of the bank at that time was David Charters McArthur. He was Superintendent from 1867-to 1876. The Melbourne branch opened on 28th August 1838 in a two-roomed brick cottage on the north side of Little Collins Street, where two huge mastiff dogs were used at night to guard the bank. The government also provided an armed military sentinel. Due to the bank's rapid growth, a new building for the Melbourne branch was opened in 1840 at 75 Collins Street West. By 1879 the bank had been upgraded to a magnificent two-storey building on the corners of Collins and Queens Streets, with the entry on Collins Street. In 1951 the Bank of Australasia amalgamated with the Union Bank to form the Australia and New Zealand Bank, now known as the ANZ. Then in 1970, the ANZ merged with both the ES&A and the London Bank of Australia to form the ANZ Banking Group Limited. The ANZ Banking Group Ltd kindly donated a variety of historic items from the Bank of Australasia. BANK of AUSTRALASIA, WARRNAMBOOL – In 1854 Warrnambool had two banks, the Union Bank and the Bank of Australasia. Later, completely different bank businesses opened; in 1867 the National Bank of Australasia, then in 1875 the Colonial Bank of Australasia. The original Warrnambool branch of the Bank of Australasia was established in July 1854, and operated from a leased cottage on Merri Street, close to Liebig Street. The bank next bought a stone building previously erected by drapers Cramond & Dickson on the corner of Timor and Gibson Streets. Samuel Hannaford was a teller and then Manager at the Warrnambool branch from 1855 to 1856 and the Warrnambool Council chose that bank for its dealings during 1856-57. In 1859 Roberts & Co. was awarded the contract to build the new Bank of Australasia branch for the sum of £3,000. The land was on a sand hill on the northeast corner of Timor and Kepler Streets and had been bought in 1855 from investor James Cust. The new building opened on May 21, 1860. The bank continued to operate there until 1951 when it merged with the Union Bank to form the ANZ Bank, which continued operating from its Liebig Street building. Warrnambool City Council purchased the former Bank of Australasia building in 1971 and renovated it, then on 3rd December 1973 it was officially opened as the Art Gallery by Cr. Harold Stephenson and Gallery Director John Welsh. The Gallery transferred to the purpose-built building in Liebig Street in 1986 and the old bank building is now the Gallery club. Staff at the Bank of Australasia in Warrnambool included the following men but others were also involved: Samuel Hannaford, Teller then Manager from 1855-1856; W H Palmer, Manager from January 1857 until November 1869 when the Teller Basil Spence was promoted to Manager; H B Chomley, Manager from April 1873 and still there in 1886; A Butt, Manager in 1895-1904; J R McCleary Accountant and Acting Manager for 12 months, until 1900; A Kirk, Manager 1904; J Moore, staff until his transfer to Bendigo in December 1908; J S Bath was Manager until 1915; C C Cox, Manager until April 1923; Richard C Stanley, Manager 1923 to April 1928. The bank cheque has significance through its association with the Bank of Australasia. The early Australian bank was established in 1834 by Royal Charter and opened in Sydney, Australia, in Sydney in 1835. The bank had many Australian offices in November 1877, particularly on the east and south coasts. Victoria had 45 percent of all Offices. The bank cheque is significant as an early example of financial management of money and money exchange or transfer.Bank cheque of the Bank of Australasia, Melbourne branch. The rectangular paper has three sides that have been perforated. It is printed in blue with bank's Insignia of a heraldic shield of sheep hung by their waists and ships in full sail. Embossed Stamp Duty mark. Embossed dots. Handwritten black ink details Dated 3rd Dec 1885. Printed in Melbourne by Sands & McDougall. Diagonal parallel lines are across the cheque. Printed: "Bank of Australasia, MELBOURNE (75 COLLINS ST. WEST)." "454,358" "Sands & McDougall, Melbourne" Embossed stamp: Symbol of Crown above double oval lines " - STAMP DUTY" "ONE PENNY" Embossed dots forming test "7 PAID T2" Handwritten: "3rd Dec. [188] 5" "134 - Slater" "Seventy one pounds 11/S 5p" "£71.11.5" Signature: (undecipherable) flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bank cheque, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, bank of australasia, boa, union bank, australia & new zealand bank, anz bank, bank note, melbourne, slater, sands & mcdougall, chrssed cheque, embossed dots, paid cheque

A bottle holding medication or poison. Labelling is difficult to read.Historical: Interpretation and comparison to modern day containers.Amber glass bottle with small round neck and screw plastic lid. The back is flat and long. The other 2 sides are equal and plain and equal with the front, which is embossed with 'not to be taken'. the other two planes of the bottle are embossed with a dotted lattice pattern. So embossed as follows: plain, latticed, 'not to be taken', latticed, plain.Embossed: - Lattice design is of dots. Not to be taken is at front. Base: G above M under 3 lines / F1092 / M. On wide flat back section at bottom is 6.bottle. amber. poison. medicine.

Document. Greeting Cards. White card with embossed celluloid front. The front has a gold basket of purple & white flowers with a bow on top. Around the edges are embossed flowers with gold dotted centres. Yours for (printed in gold) Ever (black glitter with gold edge.) printed on the front. Card held together with glue and a mauve ribbon.The 'Erima' Series Published in Londonperson, greeting cards, malone collection, malone collection, greeting cards

Off white wedding invitation. Embossed oval sonsisting of dots, circles, narrow ovals and scrolls. In the centre is a double silver circle with dots between the lines and inside are two silver hearts. On the left is a sign pointing left with 'Marr' printed on it and on the right is another sign pointing right with 'iage' printed on it. Silver printing inside. Card and insert held together with white cord.person, greeting cards, malone collection, malone collection, wedding invitation

The Trade Mark "Preservene" was registered on 23 June 1914 and traded in that name until 1930 when Cussons Australia Pty Ltd incorporated the name and its products including the Preservene Cloudy Ammonia. The Preservene Company produced a book (19 pages) "The Presevene Method Of Housework" in 1911. This publication was not only a self promotion but also a useful tool for the rural household and commercial enterprises.This bottle is very significant as it details the type of household cleaning methods and products used in the early 1900's up until the mid 1900's, when greater product diversities became available for rural areas. This product was a general cleaning agent that could be used for a variety of household items. It was the one product that "fits all cleaning". This attitude by the manufacturer fits into the mores held by the populous not only in cities but especially in the rural sector. This was an era where the success of a product was measured by the degree of versatility that came with it. The war years, the great depression had a lingering affect upon those who lived through them not to "waste" money on a multitude of products if one product had multiple uses. This was more so in rural areas where semi remote locations (as the case of the Kiewa Valley in the early 1900's) did not have the market place choices of city dwellers.This oblong shaped brown stained bottle has a red,green and faded white label covering 90% of the bottle. The bottle has a screw on lid. The bottle has embossed at the top back "POISON NOT TO BE TAKEN"on front label starting from top down "POISONOUS" IN SMALLER LETTERS "NOT TO BE TAKEN", below in an eclipse red backed sphere "PRESERVENE CLOUDY AMMONIA" below this in smaller print "CONTENTS 15 1/2 ozs", "For Household & Laundry use " below this "Removing stains and clearing Silverware Jewellery Etc". On a slant with green lettering on off white background, "IMPORTANT NOTICE (underlined) NO TOIL PRESERVENE ONLY BOIL(underlined) SOAP". Below within a red dotted boundary "PRODUCED BY Preservene Pty. Ltd. Melbourne Victoria". Below this and in smaller print "This preparation contains not more than 10 percent and not less than 7 percent free ammonia" Both sides of the label detail manufacturers instructions for different applications.laundry cleaners, stain removers, preservene label

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. The bottle’s shine has been worn from around 3/4 of its body, indicating that it has been resting horizontally on an abrasive surface, perhaps in the ground or on a river or sea bed. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. Brown, brown glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ nipple-liker bump in the centre. Bottle is straight from base to half height then tapers to a shoulder over the next quarter, than almost straight up to the mouth. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, brown glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker, ginger beer bottle

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This turn-moulded glass bottle is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This hand made, green glass bottle is representative of bottle making before mass production and is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker

This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. The bottle’s shine has been worn from around 3/4 of its body, indicating that it has been resting horizontally on an abrasive surface, perhaps in the ground or on a river or sea bed. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This turn-moulded glass bottle is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. The shine has been worn from three-quarters of the body of the bottle. There are particles adhered to the inside of the bottle. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker

2 off white wedding invitation cards and envelopes. Cards have an embossed oval consisting of lines, flowers, scrolls and dots. Inide the oval ' Wedding' is printed in silver. Silver printing inside the cards. Card and insert held together with white cord.British Manufactureperson, greeting cards, malone collection, malone collection, greeting cards

3 small off white wedding invitation cards with envelopes. The edges are pattern cut. The card has an embossed oval consisting of a line, dots and hearts. Inside the oval, printed in silver is 'Wedding'. Printing inside the carde is silver. Card and insert held together with white cord.British Manufactureperson, greeting cards, malone collection, malone collection, wedding invitation

Document. Greeting Cards. Small, single white card with two pink roses at the top and one at the bottom. The leaves are green and the stems are brown. The flowers have yellow centres and dots of black glitter. The flowers and stems are embossed and there is an embossed frame around the edge. Best Wishes written in gold between the rose stems.person, greeting cards, malone collection, malone collection, greeting cards

Blue hard bound 'Harry the Hero or Forgiveness Wins ' CHILDREN'S book by Jesse Page Author of 'The Story of a Yellow Rose ; 'The Children's Saviour etc. , The Religious Tract Society , 56, Paternoster Row and 65 St Pauls Churchyard /showing picture of bird, branches , flowers and moon on front /gold lettering / inside front cover writing in ink -'Endsleigh Private School awarded to Master Harold Merifield 2nd prize for Arithmetic , E. Gibbins Xmas .Embossed .Frank Catford Bookseller Bendigo / black and white / coloured illustrations / Little Dot Series / 6 x short stories / back of the book has several pages advertising further readingJesse Pagebooks, children's, story book, harry the hero /jesse page author / the religious tract society , 56, paternoster row and 65 st pauls churchyard / 'endsleigh private school /.frank catford bookseller bendigo / little dot series

From the Betty McPhee writing equipment collectionA bone coloured letter called a 'letter scale' with an embossed imperial scale to 7 inches on one edge. Handle has five red dots marking 1/4 oz, 1/2 oz, 1oz, 1 1/2 oz & 2oz. On reverse is inscription 'insert letter' to mark gap to weigh letter and an additional inscription 'grasp rotary button and balance'. Embossed in blue with compliments ALLEN & HANBURYSWith compliments ALLEN & HANBURYScommerce, office equipment / stationery, domestic items, writing equipment

Each five minute period is indicated on the embossed setting dial by two dots and the first quarter hour is additionally marked to show the individual minutes. The case is fitted with rubber feet. White base with black circle with braille upon it and a hard plastic white dial in the middleassistive devices, smiths

In 1872 the Derby Silver Company began production in Derby, Connecticut U.S.A. The company made bathroom-related items, clocks, tableware, flatware, candlesticks and more objects made of silver, silver plate and more. In 1898 the company became a division of the International Silver Company with headquarters in Meriden.CT. It closed down in 1933.A small child's silver plated antique Derby Silver Company cup with a large embossed floral pattern on one side. At the top of the rim is a fine dotted pattern all around it. It has an ornate decorative handle. Underneath is the Makers Mark in a circle with an anchor and crown. Above this circle is stamped: Made in U.S. America.A floral pattern is embossed on one side. On the bootom us stamped : ' Made in U.S America' above a circle Makers Mark 'Derby Silver Company with an anchor and a crown. 1 1/2'silverware, silver plate, mugs, christening mugs

A small blue cloth covered storybook for young children titled - Show Your Colours and Other True Narratives. There are gold and black patterns all over the front cover and the back is embossed. A Merit Bookplate is glued to the front endpaper. The full colour illustrated frontispiece picture is of an old man seated at a table with a younger one standing behind him. It has grey pencil scribble all over it and a large tear. There are three short stories all with strong religious themes. At the back is a list of 40 of The "Little Dot" Series - New Sixpenny Books. The spine is broken from the pages. 62p.fictionA collection of three short stories for young children of family and school life with strong religious themes in the late 1800's.religious stories, children's stories, school life

Watchmaker History: James McCabe was born in 1748. He was the son of Patrick McCabe, a notable watchmaker from Lurgan in County Armagh, Ireland. James McCabe immigrated to London in 1775 and established his business in Bells Building, Fleet Street, on 2nd April 1781. He was made an Honorary Freeman of the Clockmakers Company. The House of McCabe was renowned for the sheer variety of its designs, and the creativity and prestige of its manufacture were celebrated and revered by owners worldwide. These pieces remain highly collectable today and fetch increasingly higher prices at auction houses worldwide. Watch association with the Loch Ard: The watch was saved from the sea when discovered on the body of Mrs Rebecca Carmichael from Dublin and handed to Eva Carmichael, the only family member to survive the fatal wreck of the Loch Ard on 1st June 1878. Eva gifted the watch to her husband, Thomas Achilles Townsend when they married in 1884; his name is engraved on the rear movement cover. The watch was held by the family until 2011 when they decided to bring the watch, to Australia for auction. At this time the watch was in the possession of Eva Carmichael's grandson, Robert Townsend. Given its connection with the Loch Ard shipwreck, it was purchased at auction by Flagstaff Hill Maritime Village on 25th October 2011 to add to its Loch Ard collection and is currently referred to as the Carmichael watch. It is now on display alongside the Minton Peacock, which also survived the Loch Ard shipwreck, and other artefacts from the collection. James McCabe was originally a Belfast watchmaker who had moved his business to London. At the time James McCabe was much esteemed for producing fine watches and clocks, especially for export to India. Only the best watches were inscribed “James McCabe” and many with highly decorated cases were intended for the Indian market. Contemporary newspaper accounts of the watch's discovery echoed a Carmichael family tradition that the watch had been intended as a gift from the City of Dublin to King George IV to mark his planned visit to the city in 1821, however, there is no evidence to support this theory. Dr Evory Carmichael, according to some accounts, bought this watch from a nobleman for about £100 at some point and so it travelled with him on his final fateful journey to Australia. Today we can only guess at the actions of Mrs Carmichael in the chaos and darkness of the pre-dawn shipwreck. Perhaps the two items that were found on her body, the watch and a locket, were items that reminded her of those she held most dear, her husband and her family. When Mrs Carmichael's body was washed ashore the watch was found secreted in the waistband of her dress. In its own right the watch is of artistic and monetary value and is a rare and beautiful object depicting watch making in the early 19th century. It is a historically significant object in it’s own right and there is additional importance, surviving a significant event in the maritime history of Victoria. The wreck of the Loch Ard, Victoria's greatest maritime disaster has also been declared an event of National Significance because of its strong connection to Australia's immigration and maritime history. The watch, together with the Loch Ard Peacock, make up the two most significant shipwreck artefacts in Australia. Both of these items are of great social significance to not only local people but the wider Australian community. Funding for the watches purchase came from six local trusts and one anonymous citizen and is now on permanent display. Both these artefacts symbolise and helps to interpret the stories of survival along the Shipwreck Coast. Fob Watch, known as the "Carmichael Watch" or the "Loch Ard Watch". 1814 fob pocket watch belonging to the Carmichael family, recovered from the wreck of the Loch Ard. Fob watch (or pocket watch)and winding key, made by James McCabe and Son, of Cornhill, London. The watch is in excellent condition and its design is decorative and intricate. The gold face is covered by glass. The gold rear cover is hinged over a silver inner cover that includes the winding hole. The watch has a knob with a swinging ring from which it can be hung. The dial of the gold watch face is textured and has raised Arabic numerals and every minute is marked around the perimeter by a dot, with the 5-minute dots slightly larger. The numerals and dots are a different coloured gold than the rest of the face. The centre of the face has a wavy pattern fanning out to the base of the numerals. The hour and minute hands are of a dark colour. The stems of the hands are a wavy shape and finish with spade shaped tips; the tip of the hour hand is larger than that of the minute hand. The hour hand reaches to the base of the numerals and the minute hand is long enough to rest between the minute dots. The back of the watch is decorated with a detailed design on a textured gold background. The design is embossed in coloured metals; gold, silver, greenish-gold and pink. In the centre is a dove resting on leaves of a pot plant that sits on a silver circular base. Another dove is flying above it, and their beaks touch together. On the right of the base of the pot plant is a dog resting on its hind legs, body facing away from the plant and head twisted around to look at the birds. On the sides of this design and meeting at the base are sprigs of leaves and buds. Around this central design is a rope-like border. Around the perimeter of the case is a border of leaves and budding stems. The inside of this cover has embossed hallmarks, numbers and etched markings indicating that the watch is 18 carat gold, made by James McCabe, assayed in London in 1814 and the case may have been made by Daniel Willmott, case maker. The silver inner workings cover has a full name beautifully engraved on it. There is a winding hole that accesses a square-ended lever for the key to fit over. The handle of the watch is a twisted gold knob with a hollow ‘D’-shaped swinging ring attached to the end of it. This knob also has a hallmark.On the silver inner workings cover “Thomas Achilles Townshend” is engraved, underscored by a thin, delicately decorated line. On the gold handle is the logo of a crown with “18”’ next to it. Inside the gold rear case is stamped “DW’. Under that is etched “JAN 77 II”. Underneath this are 3 logos; a logo “leopard, crowned”’, a logo “ crown on top of 18”, and a logo “T”. Under these 3 symbols is part of a stamp that could possibly be “IMC”. Under this is “ ’ 5 9 4 ”. Other numbers, symbols and letters are etched into this case including “15001”, “2/5/19”. Others are difficult to read.warrnambool, shipwrecked coast, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, maritime museum, shipwrecked artefact, shipwreck artefact, carmichael, townshend, townsend, carmichael watch, loch ard watch, pocket watch, loch ard, 1st june 1878, james mccabe, thomas walker, robert townshend, loch ard gorge, great ocean road, victoria., memorial headstone

The original Hall Braille writer was modelled on the typewriter and was the first successful mechanical point writer. Frank Haven Hall, Superintendent of the Illinois Institution for the Blind, introduced his invention to the public on 27 May, 1892 at Jacksonville, Illinois. It was manufactured by Harrison and Seifried, Chicago, ca 1892. The carriage moves one space to the left as the keys are released. The styli in the embossing heads are controlled by the keys as are the bars on a typewriter. The styli operate from the back so that letters appear in the normal position for reading. Braille writers enable all dots in a Braille cell to be created simultaneously. This model was found in the Braille and Talking Book Library in South Yarra prior to the staff departure in 2000. Presumably used by either staff or volunteers at the library.Braille writer with a key board like a piano with black wooden keys on an ivory board. The body is made from heavy cast iron with a black lacquer.Painted in gold on top of the machine: "The Hall Braille Writer / patent pendingbraille equipment, assistive devices

The Jot a Dot Pocket Brailler is a portable, manual Braille writer designed for use by individuals who are blind or have low vision. This small, lightweight brailler has six keys for Braille entry. The keys have high contrast colors for identification by users with low vision. Braille is written from the left hand side of the page to the right, with 20 cells of braille per line. The user can read Braille as it is written by turning the unit over. A built-in reading stand keeps the unit stable when resting on hard surfaces. Tactile line and cell indicators show the current location on the page. The line indicator shows which line is being Brailled, and the cell indicator shows the position of the embossing head on the line. By turning the device over, the user can read the Braille as they write it. This Brailler uses standard photocopy paper in A5 and A6 paper sizes. The unit is constructed in one piece, so there are no parts that can be lost. 1 rectangular blue Braille unit with 6 bright green keys Yellow sticker LN017a on front. On back Jot a Dot F07077 sponsored by Guide Dogs. braille equipment, assistive devices

Designed to create an impression on paper, the stylus allows users to create Braille through the applied use of pressure that creates a depression on one size of the paper and a raised dot on the alternative side. However sometimes mistakes were made and rather than re-emboss the whole page, a Braille eraser was sometimes used by flattening out indentation on card, one dot at a time.1 wooden piece with blunted tipbraille equipment, association for the blind

Two small invitations and their envelopes. The invitations have Invitation printed in blue on the front inside an embossed frame. On the inside is: - request the pleasure of the company of M, at, on and R.S.V.P. It has blue dotted lines to write on.societies, aof, correspondence, ancient order of foresters no. 3770 collection - correspondence, invitation

Print Council of Australia Members' Print Commission, 1977.Screenprint and embossed print. Screenprinted image is in upper 1/2 of print. Two rectangular prints in gold and mauve in abstract pattern. Overlaying these is a royal blue dotted print, framing top and sides of gold and mauve print. Over centres of gold and mauve prints are rectangles of royal blue dots, giving appearance of Benday dots, or mesh screen. The density of this mesh fades gradually from top to bottom. The bottom edge of the screenprints are undulating, meeting the upper edge of the embossing that occupies remaining lower area of the print. The embossing is the same pattern as in the mauve and gold screenprint above. Mounted in pale cream matt. In black painted wodden frame, with glass.Front: A. P. VIII/X (lower left) Ewins 77 (lower right) (pencil) Back: 1978 (upper left, pencil)

Uniform issued to Lieutenant ANC (Australian Navy Cadets) "Patricia Ibbotson", No. 1005777. Commanding Officer of Training Ship Bendigo. Enlisted 26/2/2004 - Admin Officer, 2IC. Acting CO June 2012 Commanding Officer 16/10/2012. Retired 26/02/2016.1. Jacket - Black winter ceremonial, wool/polyester fabric, double breasted with 8 gold plastic buttons embossed with an anchor. Two wavy gold stripes just above sleeve hems, denotes rank of Lieutenant. One stripe has a loop. There are black shoulder flashes with the words "Australian Navy Cadets" embroidered in gold. 2. Trousers - Black wool/polyester fabric with side pockets. Fob pocket, back pocket and belt loops. Nylon and metal zipper fly, Black polyester pocket lining. 3. Shirt - long sleeved with cuff, white cotton/polyester fabric, collar, front breast pockets with button down flap. Shoulder epaulettes, plastic buttons. 4. Shirt - white, short sleeved with shoulder boards. Cotton/polyester fabric, collar shoulder epaulettes, two front pockets, white plastic buttons. Shoulder boards gold ribbon on black fabric with gold plastic embossed buttons. 6. Belt - black with gold buckle. 7. Hat - Tricorne for female officer - black and white colour fabric. Black brim, white crown with black polyester lining. On front is a cloth Officers badge featuring gold laurel wreath surrounding a silver anchor. On top of that is a gold crown with padded insert of red velvet. Around the base is embroidered dots of red, blue and green representing gems. Manufacturers label - black in print - illegible. Handwritten owner's, blue ink pen "IBBOTSON". Manufacturer's label - black ink print on white cotton fabric. 1. "ADI/ 1992/ SIZE 115s/ Bust - 115cm/ Waist 90 cm/ 8410-66-134-3810/ Wool/polyester/ Service No/ Name/DRY CLEAN ONLY." 2. ADA/ 2002/ ^/ NSN 8405 66 137 9251/ Wool/Polyester/ Size: 104L/ Waist:104/ Seat: 125/ NO/ NAME/ DRY CLEAN ONLY. 5. White print on black fabric "AUSTRALIAN TIE CO/ MADE IN AUSTRALIA/ 65% POLYESTER/ 35% VISCOSE/ MADE IN AUSTRALIA/ DRY CLEAN ONLY".uniform, anc, ts bendigo, patricia ibbotson