Wood-encased telephone (aluminium-reinforced edging strips) in leather carrying case. Hinged lid mostly aluminium (some wooden trim). (Missing from original: Metal dividers/calipers should be held by the leather strips on front of case).Metal instruction plate inside lid - shows wiring diagram with instructions in Japanese. Serial No. (Front of wooden box): 146112 (other inscriptions in Japanese)

Black KM2 bakelite military field use telephone with attached hand-receiver and spiral cord in battery charger.Three plaques, battery instructions, model and serial number, mod.record, off ring and buzz settings, at back: L1, L2, CBS, MAG, CBtelephone, communication, field telephone

Field Telephone "D" type 5equipment, c1950, army

Field telephone set (F1) with wooden boxequipment, 1942, army

Model 92 Japanese field telephone, with carry case (EQ462A)equipment, ww2, army

After the 1939 bushfires, the Forests Commission Victoria invested heavily in a radically new communications network. After suffering some inevitable delays due to the war, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. But by today’s standards, the technology was primitive and the reception poor unless the user was on a high point somewhere. The radio signal was "line-of-sight" and bounced between fire towers and relay transmitters across the mountains back to the District offices. The advent of solid-state electronics in the 1960s replaced the more delicate valve sets which enabled greater use of vehicle mounted radios. The Commission continued to research, develop and build new radios at its many workshops around Victoria. The network was supported by a large team of skilled radio technicians. The more secure and versatile State Mobile Radio (SMR) digital trunk system came into operation in about 1995. Upgraded Tait Radios were purchased in 2014 after recommendations of the 2009 Bushfires Royal Commission. But it was the convergence of separate technologies such as 5G mobile phones, high-capacity and light-weight lithium batteries, Wi-Fi, the ever-expanding internet, cloud data storage, digital cameras, GPS, personal organisers and hundreds of supporting Apps into powerful smartphones and tablets which revolutionised bushfire communications from the mid-2000s. Field telephone in leather carrying case and strap. Unknown origin or datebushfire, radios, forests commission victoria (fcv)

This field telephone was developed primary for military purposes (World War I) and other wars/military interventions there after. It was the first "mobile" telephone which had a prime objective of providing isolated or "hard" to connect with locations instant communication links. Like a lot of "new" technologies it evolved from a war environment. This handset was used to connect offices and workshops, which due to their functions could not be co-located with their prime office(external workshops).The evolution from the early 1900s to the mid 1980s when mobile communication technology progressed in leaps and bounds from hard wire telephone communication to mobile digital receivers. This handset was manufactured by a subcontracted Australian company under the Australian Post Office mandate.This handset is significant in that it was donated by the Mount Beauty Timber yards and formed an integrated part of its communication system with its out lying work yards and buildings, before the mobile handset evolution. This handset was located in an environment which required a rugged and reliable day to day communications linkage as a vital part of its logistical (business) survival. As progress demands it, the faster that customers are satisfied with the service they obtain from suppliers the longer those services will be asked for and the longer and more profitable the supplier will be. This edict is as true for rural companies as it is for small or large city businesses. The customer is "always" right.This sturdy field telephone has a shell housing made in black bakelite material with a "U" form housing the major components (wiring, magneto and batteries). The main housing has two metal bells, with a central ringer between both, on the top part (to notify incoming calls). In front of the main structure is a box with the telephone hand piece (ear and mouth receptacles) nestled on two cradles. An on/off switch is activated when handset is removed from its cradle. On the front of the control box is a winder handle(to ring off) and in a field situation to activate/deactivate the magneto. To the left of the winder but on the the main body are two wind up connection buttons for the connection of operational wires (power)On the main right hand front body and next to two chrome switches is a plate with "L (next to the top switch) and below this "L2" and underneath this are "or" "EARTH". There is a plate fastened to the front of the handset and behind the winder with "REPLACE HANDSET WHEN FINISHED" and below the winder 'SERIAL NUMBER 5116"field telephone, world war ii field telephone f mk i

Field telephone set D MK V - used for sending messages in the field via voice. Serial No. 21396.Rectangular metal box with hinged lid, containing communication apparatus for sending verbal messages. Attachments on sides & rear for carrying straps. Hook & eye latch on front for securing lid.Instruction plates on inside of hinged lid. “Serial No 21396”communications - telephonic, military equipment - army, metalcraft, passchendaele barracks trust

Item souvenired by of Robert Clarence DERBY VX148150, enlisted in the 2nd AIF on 9.1.1944 age 21 years. Discharged on 22.5.1946 with the rank of Signalman in 19 Australian Lines of Communications, Signals.Brown, leather case with leather straps containing black metal telephone mechanics & bakerlite hand piece.“SIGNAL CORPS US ARMY, TELEPHONE EE-8-A”equipment, telephone, field, us

Fiels telephone used in WW2.Military field telephone, with handsetMounted on front of the telephone is an identification plate with the inscriptions “REPLACE HANDSET WHEN FINISHED AND RING OFF. TELEPHONE SET “F” MK 1. STANDARD TELEPHONES AND CABLES PTY LTD SYDNEY 1943. D ^ D. Also mounted to the front of the phone is a smaller plate with inscription “ Serial No. 5971. telephone.

WW2 Military Field Telephone contained in a leather case with shoulder strap.Embosed on the front of the case “ SIGNAL CORPS U.S. ARMY TELEPHONE EE-8-A

Khaki - Green colour box container containg handset and controlsTele.set D Mk.V printed on lid in cream colour Wiring diagram and use instructions attached inside lid section on black plates.

Used in WW2. Basically of german origin and manufacture but 'English' handset suggests capture and use by Australian forces possibly in Middle East Desert warfare.Black Rectangular Metal Box with Lid. Total Height 215mm (with lid closed), Body Height 140mm. Lid Height 75mm.Lid attached by full length Hinge on rear and locking Clip at front.Depth 90mm. Length 275mm. Lid Outside: has overlapping lip to body when closed.Reinforcing metal attachment on left side rolls over to inside of lid and is attached by two screws. Front locking clip is spring loaded and attached to lid by 3 screws. Lid Inside: Flexible metal plate to clip on handset. 2 inscription plates on left and right ends and telephone handset described separately Body Outside:Front: 2 Jack plug points, vertically aligned 85mm from left, 25mm apart either side of mid point of height of bodyprotedted by protective pivot plate. Air vent plate attached with 2 screws adjacent to Jack plug holes (same on Back). Left side at top; metal plate for carry strap (same on right side). carry strap not with item.Right side; hole covered by protective cover plate centred 70mm from base , Wind-Up handle attached (described seoarately. Body Inside: 2/3 filled with visible metal and bakelite components in separate compartment containing unseen working parts. Left side contains morse code key in canvas bag (described separately). Contents Inside Lid. Two schematics of wiring layouts attached to left and right ends. Removable Bakelite handset clipped into postion for carrying, attached cable has 4-pronged attachment connected to main section in body. Contents Inside Body. Most working parts hidden inside metal container. White plastic button 'Pruttaste' is a test button; threaded screws on top for attachments not present.Two pieces of loose wire purpose unknown. Canvas Bag with zip, labelled DD with arrow between (Department of Defence) containing Morse Code Key; wire with large jackplug attachment connected to MC Key through the bag. Jackplug connects via front of body of object. The whole of this item is stored in left inside of body.underside of handset says PRESS KEY WHILE SPEAKING and in smaller font size TELE HD NO 2

After the 1939 bushfires, the Forests Commission Victoria invested heavily in a radically new communications network. After suffering some inevitable delays due to the war, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. But by today’s standards, the technology was primitive and the reception poor unless the user was on a high point somewhere. The radio signal was "line-of-sight" and bounced between fire towers and relay transmitters across the mountains back to the District offices. The advent of solid-state electronics in the 1960s replaced the more delicate valve sets which enabled greater use of vehicle mounted radios. The Commission continued to research, develop and build new radios at its many workshops around Victoria. The network was supported by a large team of skilled radio technicians. The more secure and versatile State Mobile Radio (SMR) digital trunk system came into operation in about 1995. Upgraded Tait Radios were purchased in 2014 after recommendations of the 2009 Bushfires Royal Commission. But it was the convergence of separate technologies such as 5G mobile phones, high-capacity and light-weight lithium batteries, Wi-Fi, the ever-expanding internet, cloud data storage, digital cameras, GPS, personal organisers and hundreds of supporting Apps into powerful smartphones and tablets which revolutionised bushfire communications from the mid-2000s. STC Telephone Set Dept of Defence Set 5 Mk D With morse keybushfire, radios, forests commission victoria (fcv)

After the 1939 bushfires, the Forests Commission Victoria invested heavily in a radically new communications network. After suffering some inevitable delays due to the war, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. But by today’s standards, the technology was primitive and the reception poor unless the user was on a high point somewhere. The radio signal was "line-of-sight" and bounced between fire towers and relay transmitters across the mountains back to the District offices. The advent of solid-state electronics in the 1960s replaced the more delicate valve sets which enabled greater use of vehicle mounted radios. The Commission continued to research, develop and build new radios at its many workshops around Victoria. The network was supported by a large team of skilled radio technicians. The more secure and versatile State Mobile Radio (SMR) digital trunk system came into operation in about 1995. Upgraded Tait Radios were purchased in 2014 after recommendations of the 2009 Bushfires Royal Commission. But it was the convergence of separate technologies such as 5G mobile phones, high-capacity and light-weight lithium batteries, Wi-Fi, the ever-expanding internet, cloud data storage, digital cameras, GPS, personal organisers and hundreds of supporting Apps into powerful smartphones and tablets which revolutionised bushfire communications from the mid-2000s. Used to communicate to remote fire towers Single wire often run through the bush from FCV district officesFire tower telephone with winderChristmas Hills South Instructions for use around winderbushfire, radios, forests commission victoria (fcv)

After the 1939 bushfires, the Forests Commission Victoria invested heavily in a radically new communications network. After suffering some inevitable delays due to the war, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. But by today’s standards, the technology was primitive and the reception poor unless the user was on a high point somewhere. The radio signal was "line-of-sight" and bounced between fire towers and relay transmitters across the mountains back to the District offices. The advent of solid-state electronics in the 1960s replaced the more delicate valve sets which enabled greater use of vehicle mounted radios. The Commission continued to research, develop and build new radios at its many workshops around Victoria. The network was supported by a large team of skilled radio technicians. The more secure and versatile State Mobile Radio (SMR) digital trunk system came into operation in about 1995. Upgraded Tait Radios were purchased in 2014 after recommendations of the 2009 Bushfires Royal Commission. But it was the convergence of separate technologies such as 5G mobile phones, high-capacity and light-weight lithium batteries, Wi-Fi, the ever-expanding internet, cloud data storage, digital cameras, GPS, personal organisers and hundreds of supporting Apps into powerful smartphones and tablets which revolutionised bushfire communications from the mid-2000s. Manufactured in both UK and Australia, the 400 series telephone was developed for the PMG in 1957 based on the British, prototype, no.700, Bakelite phone. They became obsolescent by the early 1960s but because some magneto exchanges persisted in Australia for another quarter of a century and alternatives were not cost effective, PMG/Telecom regularly repaired or refurbished these obsolete phones until they were superseded by automatic exchanges. Used to communicate to remote fire towers Single wire (with earth return) often run through the bush from FCV district officesMagneto table telephone Christmas Hills South Instructions for use around winderbushfire, radios, forests commission victoria (fcv)

A cream coloured paper cover with black information on the front. In bold ink at the top reads TM 11-5805-294-15. There are lots of detail on the cover.operator's manual, united states war office, technical manual, field maintenance, switchboard telephone, manual sb-993-gt

Cast aluminium field telephone. The lid assembly hinges from the rear. Inside the lid is a schematic diagram on a metal plate. In the main body of the set is a small shelf. On that shelf are:- a bell, line terminals, morse key, battery holder, and buzzer assembly. Under the shelf is a four terminal socket for the handpiece. The handpiece is a black Bakelite material. It has a “Press to Talk” switch on the handset. The cable is cotton covered for insulation. At the rear are two webbing straps, 25 mm wide. There is a strap loop for each side.Stencilled on top of lid is: “TELE SET D MK.V” There is a black broad arrow stencilled on front. Painted roughly on the back, in pink paint, are the letters "C.M.S".communications, signalling, telephone, ww2

Item souvenired by Roy Leslie Thurlow No VX77313 enlisted on 26.3.42. At discharge on 2.11.1945 he was a Trooper in HQ 1 ARMD BDE GRP.Field Telephone, fold open lid, green colour, shows all details of system on diagram.On plate, “telephone set D MKV Serial No 1..15.17”military equipment, communications - telephonic

After the 1939 bushfires, the Forests Commission invested heavily in a radically new communications network. After suffering some inevitable delays due to the War, radio VL3AA switched into full operation in October 1945 proudly beaming out 200 watts across the State. The communication systems were regarded at the time to be more technically advanced than the police and the military. These pioneering efforts were directed by Geoff Weste, and later technical experts like Rex Philpot, John Whitehead, Charlie Reisinger and many others who designed, built and repaired most of the radio equipment. There was a dedicated radio laboratory at Surrey Hills in Melbourne. Little is known about this particular radio handsetField radio telephone with handset.radios, forests commission victoria (fcv)