This cut-throat razor was donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. ABOUT THE “W.R.ANGUS COLLECTION” Doctor William Roy Angus M.B., B.S., Adel., 1923, F.R.C.S. Edin.,1928 (also known as Dr Roy Angus) was born in Murrumbeena, Victoria in 1901 and lived until 1970. He qualified as a doctor in 1923 at University of Adelaide, was Resident Medical Officer at the Royal Adelaide Hospital in 1924 and for a period was house surgeon to Sir (then Mr.) Henry Simpson Newland. Dr Angus was briefly an Assistant to Dr Riddell of Kapunda, then commenced private practice at Curramulka, Yorke Peninsula, SA, where he was physician, surgeon and chemist. In 1926, he was appointed as new Medical Assistant to Dr Thomas Francis Ryan (T.F. Ryan, or Tom), in Nhill, Victoria, where his experiences included radiology and pharmacy. In 1927 he was Acting House Surgeon in Dr Tom Ryan’s absence. Dr Angus had become engaged to Gladys Forsyth and they decided he further his studies overseas in the UK in 1927. He studied at London University College Hospital and at Edinburgh Royal Infirmary and in 1928, was awarded FRCS (Fellow from the Royal College of Surgeons), Edinburgh. He worked his passage back to Australia as a Ship’s Surgeon on the on the Australian Commonwealth Line’s T.S.S. Largs Bay. Dr Angus married Gladys in 1929, in Ballarat. (They went on to have one son (Graham 1932, born in SA) and two daughters (Helen (died 12/07/1996) and Berenice (Berry), both born at Mira, Nhill ) According to Berry, her mother Gladys made a lot of their clothes. She was very talented and did some lovely embroidery including lingerie for her trousseau and beautifully handmade baby clothes. Dr Angus was a ‘flying doctor’ for the A.I.M. (Australian Inland Ministry) Aerial Medical Service in 1928 . Its first station was in the remote town of Oodnadatta, where Dr Angus was stationed. He was locum tenens there on North-South Railway at 21 Mile Camp. He took up this ‘flying doctor’ position in response to a call from Dr John Flynn; the organisation was later known as the Flying Doctor Service, then the Royal Flying Doctor Service. A lot of his work during this time involved dental surgery also. Between 1928-1932 he was surgeon at the Curramulka Hospital, Yorke Peninsula, South Australia. In 1933 Dr Angus returned to Nhill and purchased a share of the Nelson Street practice and Mira hospital (a 2 bed ward at the Nelson Street Practice) from Dr Les Middleton one of the Middleton Brothers, the current owners of what previously once Dr Tom Ryan’s practice. Dr Tom and his brother had worked as surgeons included eye surgery. Dr Tom Ryan performed many of his operations in the Mira private hospital on his premises. He had been House Surgeon at the Nhill Hospital 1902-1926. Dr Tom Ryan had one of the only two pieces of radiology equipment in Victoria during his practicing years – The Royal Melbourne Hospital had the other one. Over the years Dr Tom Ryan had gradually set up what was effectively a training school for country general-practitioner-surgeons. Each patient was carefully examined, including using the X-ray machine, and any surgery was discussed and planned with Dr Ryan’s assistants several days in advance. Dr Angus gained experience in using the X-ray machine there during his time as assistant to Dr Ryan. When Dr Angus bought into the Nelson Street premises in Nhill he was also appointed as the Nhill Hospital’s Honorary House Surgeon 1933-1938. His practitioner’s plate from his Nhill surgery is now mounted on the doorway to the Port Medical Office at Flagstaff Hill Maritime Village, Warrnambool. When Dr Angus took up practice in the Dr Edward and Dr Tom Ryan’s old premises he obtained their extensive collection of historical medical equipment and materials spanning 1884-1926. A large part of this collection is now on display at the Port Medical Office at Flagstaff Hill Maritime Village in Warrnambool. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station. and an ALDI sore is on the land that was once their tennis court). The Angus family was able to afford gardeners, cooks and maids; their home was a popular place for visiting dignitaries to stay whilst visiting Warrnambool. Dr Angus had his own silk worm farm at home in a Mulberry tree. His young daughter used his centrifuge for spinning the silk. Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. He had an interest in people and the community They were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Cut-throat razor, part of the W.R. Angus Collection. Razor model No. 42, steel blade, in dark cardboard box, with bone handle, arrow shaped end; blade swings inside the handle. Razor made in Germany with blade made in Sheffield, England, in early 1900’s.Embossed on box "No. 42 / DES GERMAN MANUFACTURE", on handle "GOTTA", on blade "HAMBURG RING / REG. GOTTA REG. / SUPER FINE" and "FINEST SHEFFIELD STEEL / FORGED AND - - - HOLLOW / GROUND IN GERMANY" flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, dr w r angus, dr ryan, cut-throat razor, gotta razor, german made razor, personal effects 1900's, grooming equipment 1900's

This machine was used to sharpen men’s razors several decades ago and is thus a vintage item of historical interest. It belonged to a local Warrnambool man, Henry Cain. This item has local provenance and it is retained for this reason. Also it is an interesting memento of times past when men used razors and razor blades and needed some sort of sharpening or stropping device to keep the razors sharp. Today men mostly use disposable razors or electric razors. This is a silver-coloured oval-shaped metal object with a hinged lid and a catch.Inside the machine are two rotating brown leather pieces which form the sharpening aspect of the machine. A razor blade is inserted between the two rotating pieces.There is a turning handle on the outside of the machine and part of this folds back into the inside of the machine when the lid is closed. The handle has a wooden end. The machine is in a rectangular-shaped cardboard box. The base is white and the top is dark blue with an image of the machine on the top and the side and gold and white printing. One section of the top of the box is missing. The name of the owner is printed in black ink on the inside of the machine. ‘Abziehappart fur Rasierklingen, Barba No. 740’ ‘Stropping Machine, Barba No. 740, Made in Germany’ ‘Afilador Barba No. 440’ ‘H. Cain’ henry cain

Straight razors were once the principal method of manual shaving, they have been largely overshadowed by the safety razor and electric razors.A straight razor with an ivory coloured bakelite handle. the blade folds back into the handle'RELIANCE - WALDOO ERN 1683 Made in Germanygrooming ern-carl razors-straight

Three vintage 'safety' razors. 1: Plastic Aramic razor with disposable blade. 2: Fason bakelite razor, manufactured in Germany before and during WW2 (1930s). 3: Bakelite razor with blade, made in England c1930s3 vintage 'safety' razors metal and plasticrazors, toiletries, shaving equipment

WW1 era shaving cut-throat razorWW1 eraFolding cut-throat steel razor and cardboard protective case (case missing the top section). The blade folds into a dark brown coloured two sided bakelite plastic handle, riveted at each end. The cardboard case is dark coloured, with a light green coloured insert. The steel blade has a curved section at one end, and the shaving blade at the other.THE CROWN AND (crown and sword picture trademark) SWORD RAZOR EXTRA HOLLOW GROUND CROWN (crown and sword picture trademark) & SWORD TRADE-MARK MADE IN GERMANY ERN 1166 The Crown and Sword picture trademark is embossed on one side of the Bakelite holder.razor, cut-throat, steel, germany, crown and sword, bakelite, shaving

Curved Acrylic (probably) or tortortoise shell handled cutthroat/straight razor with steel blade. Two handle pieces known as 'scales'. Blade hinged through handle with rivet at one end. Thumb notch as part of blade continues past hinge. Two more rivets attach two pieces of handle together; 1st rivet with spacer 4cm from hinge rivet, 2nd rivet at opposite end to hinge. Handle:Gold decorative writing-Flic R with 'REGD' enclosed below on one side approx 9 cm from hinge. 2nd side no inscriptions. Blade: Side 1- FLIC enclosed in rectangular parrallelagram next to hinge. Etched 'gold' decoration and inscription along back edge. Inscription reads 'FLIC GOLD'. Blade: Side 2- Near Hinge- MADE IN GERMANY FROM BEST FLIC SILVER STEEL. Blade: Back edge- Serrations for 5cm from hinge.

Cut-throat razor, White bone handle, "Magnetic Platypus Extra Hollow Ground", Made in Germany by Oswald- Solingen. With Boxflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, cut-throat razor, oswald- solingen, magnetic platypus extra hollow ground

King Camp Gillette observed in 1902 that as existing, relatively expensive, razor blades dulled quickly and needed continuous sharpening, a razor whose blade could be thrown away when it dulled would meet a real need and likely be profitable. Safety razors had been developed in the mid-19th century, but still used a forged blade that dulled and rusted. In the 1870s, the Kampfe Brothers ( Germany) introduced a type of safety razor Gillette improved these earlier safety-razor designs, and introduced the high-profit-margin stamped razor blade steel blade. Gillette's innovation was the thin, inexpensive, disposable blade of stamped steel. Gillette's safety razor retailed for a substantial $5 half the average working man's weekly pay — yet sold by the millions. The most difficult part of development was engineering the blades, as thin, cheap steel was difficult to work and sharpen. This accounts for the delay between the initial idea and the product's introduction. To sell the product, Gillette founded the American Safety Razor Company on September 28, 1901 (changing the company's name to Gillette Safety Razor Company in July 1902). Gillette obtained a trademark registration (0056921) for his portrait and signature on the packaging. Production began in 1903, when he sold a total of 51 razors and 168 blades. The following year, he sold 90,884 razors and 123,648 blades, thanks in part to Gillette's low prices, automated manufacturing techniques and good advertising. By 1908, the corporation had established manufacturing facilities in the United States, Canada, England, France and Germany. Razor sales reached 450,000 units and blade sales exceeded 70 million units in 1915. In 1918, when the U.S. entered World War I, the company provided all American soldiers with a field razor set, paid for by the government, and as they were allowed to take them at discharge they continued their use of this product thus ensuring future sales. The company continues in the present day as the Gillette brand of Procter & Gamble, USA. Throughout the 20thC most men used this type of safety razor with disposable stainless steel razor blades to shave their beards prior to the introduction of affordable electric razors in 1960'sA blue packet of unused 'King Gillette' safety razor blades.on top of packet; Press with thumb / and snap end open / GILLETTE QUALITY THE / SAME THE WORLD OVER / FACTORIES IN / USA / CANADA , GREAT BRITAIN / MEXICO , FRANCE / COLUMBIA, GERMANY / BRAZIL, SPAIN / ARGENTINA, AUSTRALIA / GILLETTE TRADE MARK / KING C GILLETTE / RED. TRADE MARKS / GILLETTE (AUST.) PTY. LIMITED / MELBOURNE / DE 2023 / MADE IN AUSTRALIA / shaving equipment, safety razors, gillette king, proctor & gamble, moorabbin, bentleigh, cheltenham,

KING RAZOR MFG. CO.Pittsburgh, Pennsylvania; moved to Indiana, Pennsylvania in 1911.ca. 1904 - 1919 Marked "Made in Germany", although the company's offices were located at 118 E. 28th Street, New York City. ca. 1934-1943 Used the "THE KING OF RAZORS REGISTERED TRADEMARK" trademark. 47-1/2 and Trademark: Crown and Wolf. For 500 years the Weyersberg family has been producing the finest blades in the world. For centuries the King’s Crown™ mark has been synonymous with exacting precision, hand-craftsmanship and quality. For the first few hundred years the blades, made in Solingen, Germany (the “City of Blades”), were for swords. As times changed, the Weyersberg family transitioned into making cut throat razors. The Greb. Weyersberg™ family business.continue to place our mark on each and every product sold as we have done since first being able to register it in 1774. For over a 100 years, the straight razors continue to be produced in Solingen (Germany). King's Crown™A folding cut-throat razoron blade ; KING'S / CROWN 'a crown trademark' RAZOR / EXTRA HOLLOW GROUND around 'trademark' ; SET READY FOR USE on steel handle; MADE IN GERMANYcut-throat razors, straight razors, shaving equipment, steel blades, swords, weyersberg family, king crown pty ltd., solingen, germany, early settlers, market gardeners, moorabbin, bentleigh, cheltenham,

In 1848, 43-year-old John Clarke launched a cutlery business in Harvest Lane in Neepsend, Sheffield UK. Clarke entered the trade late in life he was indenture and apprenticed to Octavius Twigg, a razor maker. Clarke was granted his Freedom in 1856 and began using the trademark 'NEVA'. By the 1860s, Thomas Clarke's son by his wife Elizabeth had joined the firm. When John Clarke died at his home at Augusta Place, Rock Street, Sheffield on 25 July 1873 (aged 68), he only employed six workmen.  By 1881, Thomas had expanded this number to twenty.  He sold a wide range of cutlery and was also an ‘emigration agent’, the Sheffield Independent, of 7th September in 1886 had an article published stating Thomas helped to recruit personnel from England for cutlery centers in America.  In 1893 Clarke’s showroom displayed miniature knives from '5/16ths-inch long to the most expensive sportsman's knives, that were gold and silver mounted.  Table knives and carvers were also manufactured (or factored).  Agencies were opened in London, New York, and Melbourne.  Besides ‘NEVA, the ‘EXPRESS’ and ‘RING’ marks were used on razors; and Clarke’s marketed the American ‘GEM’ safety razor.  By 1901, the firm had moved to Mowbray Street, where its Mowbray Works overlooked the River Don. Thomas Clarke died at Harrogate on 26 April 1902, aged 62, and was buried in the same Burngreave cemetery as his parents.  Thomas’s sons, John Roome Clarke (1860-1925) and Thomas Edward Clarke, were directors, another son George William Clarke was a shareholder. John Roome Clarke died on 3 February 1925, aged 64  his son, John Clarke, of Crimicar Lane, remained as the senior partner.  Clarke’s was one of the last producers of hand-made pocket knives and it also produced a large output of sheath knives for scouting associations. The firm was liquidated in 1964, but the company name was resurrected and Its last address after 1980 was at 65 Garden Street Sheffield.  The company trademark passed on to Meteor Industries and then to Egginton Ltd. Weber & Co: The Clarke company purchased or (factored) many of its blades for razors and knives from Weber & Co of Solingen Germany. The full name of the firm originally was Jowika Stahlwarenfabrik Eugen Weber & Altenbach KG. It was founded in Solingen prior to 1928, under the name Johann & Wilhelm Kleinewefers GMBH, Messerfabrik. JWK for short, hence JoWiKa. The company was sold to Eugen Weber in the 1930s. Weber was married to a woman named Altenbach, from a family that manufactured innovative low-priced pocketknives, as well as other cutlery items. In 1960 Weber opened a branch factory in Listowel Ireland. It was sold to Albert M. Baer of Imperial Schrade in 1978. The Listowel factory was closed about a year and a half before the U.S. Schrade factory closed in 2004 and the Jowika factory in Solingen had closed in 1984.An item with an interesting manufacturing history from the 1930s showing how one man can grow a business into a successful concern that made quality products that stand the test of time.Razor metal folding blade with horn handle in its original cardboard box Inscription Made by John Clarke and Son England. "Champion" razor. On box " The Champion 10/6d" and "Weber Lohmann & Co SOLINGEN".flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village

Cut throat razor, "Cuckoo' Brand, with a black tortoise shell handle, contained in a brown tortoise shell case Cuckoo Brand, Made in Germany (see photo)personal care, shaving, razor

A straight razor is a razor with a blade that can fold into its handle. They are also called open razors and cut-throat razors. This example of a straight razor was made in Germany for the export market by ERN. The company was registered in 1874.Steel and ebonised wood straight razor in original caseCase: "The Famous es-ex razor". Blade: "Made in Germany"es-ex razor, straight razors, cut throat razors, ern - germany

The Wodonga Historical Society Haeusler Collection provides invaluable insight into life in late nineteenth and early twentieth century north east Victoria. The collection comprises manuscripts, personal artefacts used by the Haeusler family on their farm in Wodonga, and a set of glass negatives which offer a unique visual snapshot of the domestic and social lives of the Haeusler family and local Wodonga community. The Haeusler family migrated from Prussia (Germany) to South Australia in the 1840s and 1850s, before purchasing 100 acres of Crown Land made available under the Victorian Lands Act 1862 (also known as ‘Duffy’s Land Act’) in 1866 in what is now Wodonga West. The Haeusler family were one of several German families to migrate from South Australia to Wodonga in the 1860s. This item has well documented provenance and a known owner. It forms part of a significant and representative historical collection which reflects the local history of Wodonga. An open cut throat razor with black plastic handle. On one side of blade near handle, "1st GERMAN MANUFACTURE". On other side of blade near handle, "KAUFMANN/IMPERIAL"haeusler, haeusler collection, wodonga, razor, cut throat razor

Man's cutthroat razor with black curved handle which folds down to cover blade.Crown Imperial Special Hollow Ground|Made in Germanypersonal effects-toilet requisites, shaving

Inscriptions 'Crown' and 'Imperial' suggest razor was made before 1914 - 18 warRazor with black movable handleCrown Imperial Spedial Hollow Ground Imperial Razor Made In Germanypersonal effects-toilet requisites, shaving

Bengall razors, made by T.R. Cadman & Sons in Sheffield, England, were produced for a long period, with the trademark granted in 1748 and the company trading until 1965, meaning they were made throughout the 18th, 19th, and 20th centuries, with many popular models from the early to mid-20th century (1900s-1940s/50s) being common finds. They were a classic type of straight razor, popular for daily use before safety razors took over. Klein cut-throat razors marked "Ground in Hamburg" are vintage straight razors, often collectible, indicating they were manufactured by or for J. Klein & Co. (or similar) and had their blades ground for sharpness in Hamburg, Germany, a traditional centre for steel and razor making, reflecting a quality indicator for these classic wet-shaving tools. H. Boker & Co. is a historic German-American company, established in 1837 by Hermann Boker, known for its high-quality cutlery, especially vintage straight razors, pocket knives, and other tools, marked by the iconic "Tree Brand" symbol originating from a chestnut tree near their Remscheid forgeTwo cut throat razors: 1. A vintage Bengall Cut Throat Shaving Razor with a brown bakelite handle made by T.R. Cadman & Sons, in Sheffield, England.The blade folds back into the handle to protect it. It has a floral decoration around the end of the blade near the handle. It is stored in a burgundy leather case with 'Genuine Bengall Razor' stamped onto it. 2. A vintage Klein Cut Throat Shaving Razor ground in Hamburg Germany with a brown bakelite handle.The blade folds back into the handle to protect it. There is a blue sticker on the end of the inside of the case with SHOP written on both sides. 3. An empty H Boker and Co razor case with the name in ornate lettering printed in black lettering on the front with Trade Mark written each side of an outline of marked by the iconic "Tree Brand" symbol originating from a chestnut tree near their Remscheid forge tree on the short section of the case. There is a white sticker with E.A. Pettit printed on it in purple and the name Kennedy in black ink handwriting below.1. The blade has 'Bengall' engraved one side and on the back it has 'T.R. Cadman & Sons Sheffield England'. 2.The blade has 'Klein' engraved on one side and on the back has 'Ground in Hamburg Germany'. There is a blue sticker on the end of the inside of the case with 'SHOP' written on both sides.3. On the empty worn black case 'H Boker and Co' 'Trade Mark' is written each side of an outline of tree on the short section of the case. There is a white sticker with 'E.A. Pettit Puts Your razor Inters Class Order' or 1/6' printed on it in purple and the name 'Kennedy' in black ink handwriting below.cut throat razors, shaving equipment, shavers, barbers

The razors often feature markings such as "Solingen," a city in Germany famous for high-quality blade manufacturing. As with many vintage razors, their value often lies in their craftsmanship and historical significance. Traditional straight razors need regular maintenance, including stropping before each use and occasional honing to keep the edge sharp. Shaving with a cut-throat razor requires practice and a specific technique to achieve a close shave without irritation. A vintage Tonso Cut Throat Shaving Razor with a cream bone handle with Tonso Made in Germany printed on one side in red lettering. On the blade is engraved Tonso No. 5556/8. On the back of the blade, Webster & Butz Merscheid-Solingen Germany is engraved. The blade folds back into the handle to protect it. It has an outline of a double headed bird like symbol on the end of the blade near the bone handle. It is stored in a worn cardboard case with 'TONSO GERMANY 555 6/8' stamped onto it. There are also instructions and inspection information printed on a small piece of paper glued onto the end of the slide out internal section of the case. (a) The bone handle has 'Tonso Made in Germany' printed in red lettering on one side On the front of the blade is engraved 'Tonso No. 5556/8'. On the back of the blade, 'Webster & Butz Merscheid-Solingen Germany' is engraved. It is stored in a worn cardboard case with 'TONSO GERMANY 555 6/8' stamped onto it.cut throat razors, shaving equipment, shavers, barbers

Razors often feature markings such as "Solingen," a city in Germany famous for high-quality blade manufacturing. As with many vintage razors, their value often lies in their craftsmanship and historical significance. Traditional straight razors need regular maintenance, including stropping before each use and occasional honing to keep the edge sharp. Shaving with a cut-throat razor requires practice and a specific technique to achieve a close shave without irritation. A vintage Magnetic Platypus Cut Throat Shaving Razor with a cream plastic handle which has four tiny holes on each side of it. On the blade is engraved Magnetic Platypus with an outline of a platypus and Extra Ground. It also has engraved an outline of a platypus symbol and Made in Germany on the end of the blade near the cream coloured handle.The blade folds back into the handle to protect it. On the back of the blade is engraved Wald-Solingen. There is no storage case. On the front of the blade is engraved 'Magnetic Platypus' with an outline of a 'platypus, Extra Ground.' On the back of the blade, 'Wald-Solingen Germany' is engraved. cut throat razors, shaving equipment, shavers, barbers

3 x Cut-throat razors. 1. Ivory handle with crown and sword carving. 2. Bakelite handle.1. Made in Germany ERN 1166. 2. Dr. Peres Solingencut-throat razors, shaving equipment

Possibly WWI historical significance.American model safety razor. Made in Germany possibly from 1914 with metal container.Safety Razor, Warranted, Made in Germany. Safety razor printed on metal container