Showing 77 items
matching glass embossed inside
-
Flagstaff Hill Maritime Museum and Village
Container - Medicine Glass, ca. 1887 to early 20th century
... glass embossed inside..., the embossed inscriptions are inside the glass, the clear glass has... concave base. All embossed marks are inside the glass..., the embossed inscriptions are inside the glass, the clear glass has ...This small medicine glass has ho manufacturer's or owner's marks. It has no side seams, the base is slightly concave, the embossed inscriptions are inside the glass, the clear glass has slight imperfections and ripples, and the glass is slightly opaque below the lip; these features point to the glass being blown into a mould, partially set, and spun between that mould and an internal mould that had the embossing on it, called a turn-mould process. The lip was then ground to be smooth. The process was patented in 1887 with the title of "Mold for blowing turned bottles".This medicine glass is significant as an example of medical equipment that has a design still used today. It is significant also for having the embossing inside the glass, which was likely produced by the turn-mould method of bottle (and container) making.Medicine glass or dose cup; clear glass with small imperfections and ripples in the glass, no side seams and a slightly concave base. All embossed marks are inside the glass. The imperial measurements are in graduated scales for tablespoons, teaspoons, and ounces and drachmas. "OUNCES DRACHMS" "TABLE TEA"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, medicine glass, measuring glass, dose cup, medicine dispensing, medicine measurement, sambell pharmacy warrnambool, sambell chemist and dentist, internal embossing, glass embossed inside, 20th century chemist, blown glass, two-piece mould, turn-moulded glass, turned bottles -
Flagstaff Hill Maritime Museum and Village
Instrument - Sphygmomanometer, Riester, 1948 -1969
This blood pressure monitor (sphygmomanometer) belonged to Dr William Roy Angus, surgeon and oculist. It was donated to Flagstaff Hill Maritime Village by his daughter, Berry McDade in January 2015. . It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material once belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) as well as Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, up until 1969. The approximate manufacture date of the blood pressure monitor coincides with the time when Doctor William Roy Angus had his practice in Warrnambool. The company Short & Mason Ltd. London used the brand name TYCOS between 1907-1969 and Rudolf Riester (the brand on the cuff) formed the company ‘Riester” in Germany in 1948, where he developed and produced the first mercury blood pressure monitors. In 1939 Dr Angus and his family moved to Warrnambool where he purchased “Birchwood,” the 1852 home and medical practice of Dr John Hunter Henderson, at 214 Koroit Street. (This property was sold in1965 to the State Government and is now the site of the Warrnambool Police Station.). Dr Angus was appointed on a part-time basis as Port Medical Officer (Health Officer) in Warrnambool and held this position until the 1940’s when the government no longer required the service of a Port Medical Officer in Warrnambool; he was thus Warrnambool’s last serving Port Medical Officer. (The duties of a Port Medical Officer were outlined by the Colonial Secretary on 21st June, 1839 under the terms of the Quarantine Act. Masters of immigrant ships arriving in port reported incidents of diseases, illness and death and the Port Medical Officer made a decision on whether the ship required Quarantine and for how long, in this way preventing contagious illness from spreading from new immigrants to the residents already in the colony.) Dr Angus was a member of the Australian Medical Association, for 35 years and surgeon at the Warrnambool Base Hospital 1939-1942, He served as a Surgeon Captain during WWII1942-45, in Ballarat, Victoria, and in Bonegilla, N.S.W., completing his service just before the end of the war due to suffering from a heart attack. During his convalescence he carved an intricate and ‘most artistic’ chess set from the material that dentures were made from. He then studied ophthalmology at the Royal Melbourne Eye and Ear Hospital and created cosmetically superior artificial eyes by pioneering using the intrascleral cartilage. Angus received accolades from the Ophthalmological Society of Australasia for this work. He returned to Warrnambool to commence practice as an ophthalmologist, pioneering in artificial eye improvements. He was Honorary Consultant Ophthalmologist to Warrnambool Base Hospital for 31 years. He made monthly visits to Portland as a visiting surgeon, to perform eye surgery. He represented the Victorian South-West subdivision of the Australian Medical Association as its secretary between 1949 and 1956 and as chairman from 1956 to 1958. In 1968 Dr Angus was elected member of Spain’s Barraquer Institute of Barcelona after his research work in Intrasclearal cartilage grafting, becoming one of the few Australian ophthalmologists to receive this honour, and in the following year presented his final paper on Living Intrasclearal Cartilage Implants at the Inaugural Meeting of the Australian College of Ophthalmologists in Melbourne. In his personal life Dr Angus was a Presbyterian and treated Sunday as a Sabbath, a day of rest. He would visit 3 or 4 country patients on a Sunday, taking his children along ‘for the ride’ and to visit with him. Sunday evenings he would play the pianola and sing Scottish songs to his family. One of Dr Angus’ patients was Margaret MacKenzie, author of a book on local shipwrecks that she’d seen as an eye witness from the late 1880’s in Peterborough, Victoria. In the early 1950’s Dr Angus, painted a picture of a shipwreck for the cover jacket of Margaret’s book, Shipwrecks and More Shipwrecks. She was blind in later life and her daughter wrote the actual book for her. Dr Angus and his wife Gladys were very involved in Warrnambool’s society with a strong interest in civic affairs. Their interests included organisations such as Red Cross, Rostrum, Warrnambool and District Historical Society (founding members), Wine and Food Society, Steering Committee for Tertiary Education in Warrnambool, Local National Trust, Good Neighbour Council, Housing Commission Advisory Board, United Services Institute, Legion of Ex-Servicemen, Olympic Pool Committee, Food for Britain Organisation, Warrnambool Hospital, Anti-Cancer Council, Boys’ Club, Charitable Council, National Fitness Council and Air Raid Precautions Group. He was also a member of the Steam Preservation Society and derived much pleasure from a steam traction engine on his farm. He had an interest in people and the community. He and his wife Gladys were both involved in the creation of Flagstaff Hill, including the layout of the gardens. After his death (28th March 1970) his family requested his practitioner’s plate, medical instruments and some personal belongings be displayed in the Port Medical Office surgery at Flagstaff Hill Maritime Village, and be called the “W. R. Angus Collection”. The W.R. Angus Collection is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool.. The collection of medical instruments and other equipment is culturally significant, being an historical example of medicine from late 19th to mid-20th century. Dr Angus assisted Dr Tom Ryan, a pioneer in the use of X-rays and in ocular surgery. Sphygmomanometer (blood pressure meter), from the collection of W.R. Angus. Brand TYCOS by Short & Mason Ltd, London. The case is of black leather with press-stud closure, lined in brown leather with gilded maker's embossing inside lid. The meter has a grey fabric cuff attached to two black rubber tubes, one tube has a pump bulb on a short brown extension tube on the end, the other has a round meter with glass covered dial on the end. Dial registers 20 – 300. There are maker's details on both meter and box."Patent 9535. No. 39370". Gold maker's stamp " "TYCOS" "SPHYGMOMANOMETER / SHORT & MASON LTD. LONDON / company’s logo”. Cloth label sewn on cuff "GERMANY / RIESTER"flagstaff hill, flagstaff hill warrnambool, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, sphygmomanometer, chemist equipment, dr w.r. angus, medical instrument, warrnambool base hospital, medical treatment, medical history -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1880s to 1910’s
This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. The bottle’s shine has been worn from around 3/4 of its body, indicating that it has been resting horizontally on an abrasive surface, perhaps in the ground or on a river or sea bed. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. Brown, brown glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ nipple-liker bump in the centre. Bottle is straight from base to half height then tapers to a shoulder over the next quarter, than almost straight up to the mouth. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, brown glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker, ginger beer bottle -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1880s to 1910s
This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This turn-moulded glass bottle is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1880s to 1910s
This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This hand made, green glass bottle is representative of bottle making before mass production and is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. There is a portion of cork in the bottle’s mouth and dry remnants in the bottle’s base. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker -
Flagstaff Hill Maritime Museum and Village
Container - Bottle, 1880s to 1910s
This handmade green glass bottle was made using the turn-moulded or rotated-moulded method, a variation of the mould-blown process. The bottle has the remnants of a cork seal in its mouth. It possibly contained ginger beer, soda or mineral water, flavoured drinks, liquor or wine. The bottle’s shine has been worn from around 3/4 of its body, indicating that it has been resting horizontally on an abrasive surface, perhaps in the ground or on a river or sea bed. TURN-MOULDED BOTTLE production method This bottle was handmade using the ‘turn-moulded’ process, one of a variety of mould-blown processes that followed the earlier mouth-blown method. The maker would add a portion of hot soft glass to the end of his blowpipe then blow air through the pipe while placing the end inside a bottle mould. The mould was then turned and twisted, giving the bottle a round, seamless body, and usually a round indented base. The cooled body of the bottle would then be finished with the addition of an applied top. A small amount of soft glass would be applied to the top of the bottle and a lip would be formed using a tooling implement. A concentric ring would also form below the lip, caused by the rotated lipping tool. The bases of bottles made with the turn-moulded method were generally not embossed but would commonly have a mamelon or ‘dot’ in the centre of the base. SEALING THE BOTTLE After filling this type of bottle with its contents it is then sealed with a straight, cylindrical cork with the aid of a hand operated tool called a bottle corker. The bottle corker compresses the cork as it is driven into the bottle. Once inside the bottle the cork expands evenly into the opening to tightly seal the contents – the denser the cork the better the seal. This turn-moulded glass bottle is made distinctive due to its round seamless body and indented base.Bottle, dark green glass. Handmade turn-moulded bottle with seamless body and tooled lip. Deeply indented base has push-up mark with a ‘mamelon’ bump in the centre. Bottle is straight from base to half height, then tapers to a shoulder over the next quarter, than almost straight up to the mouth. The shine has been worn from three-quarters of the body of the bottle. There are particles adhered to the inside of the bottle. Possibly used for ginger beer. Produced in 1880s to 1910’s. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, green glass bottle, handmade glass bottle, bottle with indented base, turn-moulded bottle, rotate-moulded bottle, tooled lip on bottle mouth, applied lip bottle, bottle corker -
Kiewa Valley Historical Society
Trophies - Glass - Tawonga Primary School, 1980
The Tawonga Primary School was a weatherboard building built on 8 acres. In 1900 a fire destroyed the building and its records. The school was then moved to the Old Tawonga Hall before a new one was built in 1910 on land donated by Frank Cooper. In 1937 and 1954 further buildings were added. Tobacco farming and the building of the Kiewa Hydro Electric Scheme increased the number of pupils during the 1950s and 1960s. This glass represents the celebration held when the school became 100 years old.Tawonga Primary School was established for the children of the farmers of the Kiewa Valley in 1880 and later for children of the tobacco farmers and workers on the Kiewa Hydro Electric Scheme. The history of the school reflects the activities of the people living in the valley and in particular Tawonga township.Clear glass with gold metal brim and embossed in gold on two sides. Base is solid tapering up to the glass sides.On one side: Gold embossed picture of school building On opposite side: Gold embossed 2 circles - Inside inner one: 1880 - 1980. Between this and outer circle - Tawonga Primary School No 2282. Underneath both circles gold embossed: Centenarytawonga primary school, kiewa valley, education -
Kiewa Valley Historical Society
Crockery - Bogong Hotel
Bogong Hotel at Tawonga. See KVHS 0965, KVHS 0991 - KVHS 0993 inclusive.Bogong Hotel an important social icon for Kiewa Valley farmers, visitors, and KHES workers. The Bogong Hotel was 125 years old when it was burnt down in December 2011.1. 2 small china cups- white with black and green lines around the top and 'Bogong Hotel' logo 2. 2. glass cups with a handle. Glass is smooth on outside and has vertical 'waves' on inside 3. 1 small glass jug with handle and pouring lip. It has 5 rings of embossed glass around it 4. 1 burnt fire valve handle - T shaped for attaching to a surface 5. burnt bottle topbogong hotel, tawonga, crockery, fire at bogong hotel -
Kiewa Valley Historical Society
Bottle - Spirits
Whisky came in bottles bought at a hotel. The shape of the bottles changed as did the stopper used to seal it. Pre 1966 if this bottle was made in Australia.Historical: Change of bottles imperial v metric, shape, glass, stopper embossing, use. Aesthetic: Display showing embossing and shape.Clear glass bottle with oval shape used for whisky. Sides are straight tapering sharply to form a short neck and opening.Large embossing on the front and back sides at the top. There is a broken cork stuck in the opening. The glass has a bubble and an inside 'chip'.Embossed at top inside a banner on one side 'Imperial' and the other side 'Quart'bottle for spirits -
Kiewa Valley Historical Society
Bottle - Clag
Clag was used in homes, schools and offices for sticking mostly paper and cardboard together. It was applied with a brush. In later years adhesives became varied with chemicals being combined enabling many different surfaces to be stuck together. Clag is a very basic form of adhesive.Clear glass round bottle gradually tapering from base to opening. It has an orange and white label with blue and white writing and titled 'Clag'. The opening has a partly broken cork in it.Embossed at base: 'Angus & Co. Pty. Ltd around the top / 1156 / glass manufacturers logo '9 above 46' inside a circle then '4' Across the bottom: 'Clag'bottle for clag; adhesive; office equipment -
Kiewa Valley Historical Society
Bottle - Soft Drink, c1940s
Soft drink came in bottles bought at the local grocery store or at a larger city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. The history of Zedmanfg Company, Albury. Historical: Change of bottles - shape, glass, stopper, embossing, use. Aesthetic: Display showing embossing & shape especially if in good condition. Clear glass bottle. Bottom half has straight sides. Upper half tapers to the top where a metal crimp fits over the lip. Manufacturer's name is heavily embossed in cursive script diagonally across the lower half. The place 'Albury' is embossed below the diagonal script, in capital letters.There is heavy embossing at the base and at the bottom of the sides. All in capital letters. It has a crown seal - AGMZedManfg Co. Albury - across the bottom half of the bottle. At the base on the sides around the circumference 'This bottle is the property of the Zedmanfg Co. Albury. On the Base: F1486, GM inside A, M 113 glass, bottle, domestic, household, albury, zedmanfg co., drinks, lemonade -
Kiewa Valley Historical Society
Bottle - Soft Drink, 1940s - 1950s
Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re-cycled remaining the property of the manufacturer. History of Cohn Bros., Bendigo & Swan Hill.Historical: Change of bottles - shape, glass, stopper, embossing, use. Aesthetic: Display showing embossing & shape especially if in good condition.Clear glass bottle. Bottom half has straight sides. The top half tapers to the top where a metal crimp fits over the lip. Manufacturer's name is embossed in print in block letters with its logo just above halfway from the bottom. At the base on the sides is embossing in capital letters around the circumference. The base is embossed with the crown seal of AGM.On 1 side half way up is embossed - Cohn / circle with CB inside around top of circle is Bendigo and around bottom of the circle is Swan Hill / Bros.is on the other side of the circle. - On the other side is embossed - The property of the Cohn Bros. Vic. Bry. Co. Ltd. Bendigo & Swan Hill. At the base - F1449 AGM (crown seal) M 2glass, bottle, domestic, household, drinks, lemonade, cohn bros., swan hill, bendigo -
Kiewa Valley Historical Society
Bottle - Soft Drink, 1930s - 1940s
Soft drink came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of R.J. Hadden's company in Benalla.Historical: Change of bottles - shape, glass, stopper. embossing, use. Aesthetic: Display showing embossing & shape especially if in good condition.Clear glass bottle heavily embossed. It was used for lemonade. It has straight sides that taper towards the opening two thirds of the way up. On 1 side the company's logo forms a circle with the word 'lemonade' embossed horizontally inside the circle. On the other side, at the base, are 2 lines of embossing.R. J. HADDEN - moon shape across the top forming the top of a circle with BENALLA completing the circle below. LEMONADE is embossed horizontally inside this circle. On the other side of the bottle: 'This bottle is the property / of R.J.Hadden, Benalla.' Base: lemonade, benalla, bottle, drink, r.j.hadden, soft drink -
Kiewa Valley Historical Society
Bottle - Beer, 1930s - 1940
Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles were recycled remaining the property of the manufacturer who paid for their return. History of Manufacturers Bottle Co. of VictoriaHistorical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear brown glass beer bottle. Straight sides 190 mm from base. Sharp taper to neck which tapers for 90 mm to opening. At top of straight side is a heavily embossed spade (as in cards) shape with M.B. at top and C.V. beneath - both inside spade shape. Bottle made with 2 longitudinal halves. At the bottom near the base is heavily embossed print (in capital letters) around the circumference. At the base is embossed a horseshoe shape.Inside spade shape: M. B. above C. V.. Along the circumference at the bottom "The Property of Manufacturers Bottle Co. of Victoria Pty. Ltd.'. At the base; A horse shoe shape with a pointed curve.bottle, beer, munufacturers bottle co. of victoria, horse shoe shape on bottle, spade shape on bottle -
Kiewa Valley Historical Society
Bottle - Beer, 1944
Beer came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles were recycled remaining the property of the manufacturer who paid for their return.History of the company - Pick Ax, AdelaideHistorical: Change of bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing & shape especially if in good condition.Clear brown glass bottle used for Beer. Long straight sides before sharp taper to neck which has a slight bulb shape. Glass joined longitudinally on 2 opposite sides. Cork is stuck inside the bottle. Along the bottom of the sides there are 3 rows of heavily embossed print (capital letters), beginning with a circle. Embossed on base: 634. At bottom: circle (can't read). 3 lines: This is the Property of / ....Bottle Co-Operative / Company Limited South Walk.bottle, brown glass, beer, adelaide brewery, pick ax brewery -
Kiewa Valley Historical Society
Bottle - Sauce, Late 1930's
Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of H.M. Leggo & Co. Ltd. BendigoHistorical: Change of bottles - shape, glass, embossing, use Aesthetic; Display showing, embossing, size, shape.Medium size sauce bottle made with clear glass. The bottom half has 10 equal sides (or panels) going half way up. The sides become round and taper to the opening to a lip and screw top. Heavily embossed on 2 of the side panels with printing in capital letters vertically and the maker's name printed horizontally above the panels directly opposite. Embossed on the base.Manufacturer: 'Leggo" on side. Sides: "This Bottle is the Property / of H. M. Leggo & Co. Ltd Bendigo " Next panel: "Is Lent Only / Must Be Returned" Base: Common Seal - "A' with 'G' inside top half and 'M' inside lower half of A. Underneath this and across the middle is "M154' with 'M' below On the edge: '018'sauce, household, h.m. leggo & co. ltd. bendigo, glass bottle -
Kiewa Valley Historical Society
Bottle - Cream, 1940's
Cream came in bottles bought at the local store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it - the cardboard one predating the aluminium seals. Liquids were measured in pints pre 1966.Historical: Change of bottles - shape, size, stopper, embossing Aesthetic: Display showing embossing, size and shape Clear glass cream bottle with straight edges half way up tapering to the top where there is a thick lip on the outside. Opening is wide. There is an inner rim inside the opening which held a cardboard disc which fitted on to seal it. Heavy embossing on the side and base printed in capital letters.On side near the base: "One Imperial Pint" On base: At top - Common seal A with G at top and M below in side the A. F1297 across middle and M underneath it.cream, dairy, bottle, household -
Kiewa Valley Historical Society
Bottle - Cream, 1940's
Cream came in bottles bought at the local store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Liquids were measured in pints pre 1966.Historical: Change of bottles - shape, glass, stopper, size, embossing, use Aesthetic: Display showing embossing, size and shape especially if in good conditionClear glass bottle used for storing cream. Straight sides half way up then gently tapered into a wide opening which widens with a broad lip on top. Heavily embossed along the bottom on one side in printed capital letters and lightly embossed on base. Lip on inside to hold a cardboard disc that sealed the opening.Side: One Imperial Pint Base: G 499cream, dairy, milk bar, bottle, household -
Kiewa Valley Historical Society
Bottle - Cream, 1940's
Cream came in bottles bought at the local store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Measurement of liquids was in pints pre 1966.Historical: Change of bottles - shape, size, glass, stopper, embossing and use. Aesthetic: Display showing embossing and shape.Clear glass bottle with straight sides tapering towards the opening from half way up. The opening is wide with a thick glass rim. There is an inner rim inside the opening to hold a cardboard disc to seal it. It is heavily embossed on one side near the base.Side: 'Imperial Half Pint'bottle, cream, dairy, milk bar, household -
Kiewa Valley Historical Society
Bottle - Cream, 1935
Cream came in bottles bought at the local store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. The amount of liquid was measured in ounces and pints pre 1966. History of J. Kikpatrick, Waverley, East malvern.Historical: Change of bottles - shape, size, stopper, embossing and use. Aesthetic; Display showing embossing and shapeClear small glass cream bottle with heavy embossing on both sides. Inside the opening is a rim to hold a cardboard disc used to seal the bottle. The sides are straight half way up then taper to the opening. One side: The Property of / J. Kilpatrick (half moon on top) / Waverly Road (across middle) / East Malvern (half moon on bottom) Other side: Please / wash / & / Return (also curved with & in the middle) Along side at base: "Contents not less than 8 ozs." Base: Across middle M93 above M, and AGM below. cream, dairy, milkbar, bottle, household -
Kiewa Valley Historical Society
Bottle - Spirits, 1940's
Whisky came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape of bottles varied. Bottles were recycled remaining the property of the manufacturer who paid for their return. History of James Dickson Co. Pty. Ltd.Historical: Change of Bottles - shape, glass, embossing. Collected by bottle collectors. Aesthetic: Display showing embossing and shapeClear glass whisky bottle with heavy embossing on one side where the maker's name and details is printed in capital letters longitudinally. Heavily embossed zig zag pattern at the top of straight sides that go three quarters of the way up. The sides taper to the neck which has straight sides to the screw top opening. The tapered section is grooved with ridges of straight lines to a lip which is between it and the neck. Side (longitudinally): 'This Bottle is the Property of / James Dickson & Co. Pty Ltd / Established 1854 / Melbourne Aust. / And Cannot Be Legally Used By Others' Base: 'A' above 'F892' and 'M' beneath. Reading from the inside of the bottle on the base is 'E41' whisky, bottle, spirit, james dickson co. pty. ltd -
Kiewa Valley Historical Society
Bottle - Spirits, 1890's - 1900 Late Victorian
Spirits came in bottles sold at licensed premises either locally or in larger cities visited during shopping expeditions. The shape and colour of the bottles varied. An 'Imperial Pint' was the standard measurement at the time. The opening of bottles was hand made prior to 1915. History of Mitchell & Co. Belfast Ltd.Historical: Change of bottles - shape, glass, embossing, manufacture Aesthetic: Display showing how made, embossing, shapeClear glass bottle with green tinge and heavy embossing. Used for Old Irish Whisky. The bottle has a longitudinal join on each side but the opening has been hand made without the joins. The bottle is an oval shape with long straight sides three quarters of the way up tapering to the neck which has a lip and then the opening. The base of the bottle is curved inwards.Front: top and curved around the bottle's shape: 'Old Irish Whisky'. Inside of which is a shield shape with a crown shape inside it. Either side of the shield horizontally 'Trade' (the shield) then 'Mark'. Same side off bottle at bottom are 2 lines in heavily embossed print also in capital letters 'Mitchell & Co / of Belfast Ltd.' Back: curved around the bottle's shape inside a 'ribbon' is "Imperial Pint"spirits, bottle, old irish whisky, mitchell & co. belfast ltd. -
Kiewa Valley Historical Society
Bottle - Sauce, Late 1930's
Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of Australasian Jam Co. Pty Ltd, MelbourneHistorical: Change of bottles - shape, glass, embossing, use Aesthetic: Display showing embossing and shapeClear glass sauce bottle with straight sides a little more than half way up. This bottle is a hexagon at the base and along the straight sides. The bottle then tapers to the opening reaching a lip near the screw top opening. One of the 6 sides is heavily embossed with printed capital letters reading sideways from top to bottom of the bottle. There is embossing on the base.Side: "This Bottle is the Property of / The Australasian Jam Co Pty Ltd / Melbourne / Contents 26 ozs Approx" Base: Common Seal "A" with 'G' inside top of 'A' and 'M' inside bottom half of 'A'. 'M257' is underneath the 'A' and across the middle. 'M' is underneath.glass bottle, sauce, jam, australasian jam co pty ltd melbourne -
Kiewa Valley Historical Society
Bottle - Sauce, 1920's
Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape, size and embossing of bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of Holbrook & Co and of VulcanHistorical: Change of bottles - shape, embossing, stopper Aesthetic: Display showing embossing, size and shapeClear glass bottle with straight sides two thirds of the way up. Heavily embossed reading from top to bottom down the side of the bottle. Heavily embossed along the circumference at the bottom. Sides taper quickly to a long straight neck to a lip near the opening. On the inside of the opening there is a lip a little way down. Sealed with a glass stopper with cork. Embossed on the base.Side - vertically read from top to bottom: 'Holbrook & Co' Along bottom: 'This Bottle is the Property of Holbrooks A(sia) Ltd' There is a '3' above 'Holbrooks' Base: 'Vulcan'glass bottle, sauce, holbrook & co., vulcan, household -
Kiewa Valley Historical Society
Bottle - Sauce, 1940's
Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed. Bottles were re cycled remaining the property of the manufacturer. History of W. J. & F. Barnes, Pty. Ltd. Melbourne.Historical: Change of bottles - shape, glass, embossing, use Aesthetic: Display showing embossing and shape Clear glass medium sized bottle. The base is as wide as the top before it tapers into the neck and lip and then the screw top. From the base it tapers in before a very gradual taper to the broad part which is three quarters of the way up. The base is round but the sides have 4 wider 'panels' opposite each other. In between these are 2 smaller panels. Heavy embossing on 1 wider panel and base printed in capital letters.Side: vertically: 'This bottle is the Property of / W. J. & F. Barnes Pty Ltd. Melbourne' Base: Common Seal "A" with 'G' inside the top half and 'M' inside the lower half. Underneath the 'A' and across the middle is 'F1570' and below this is 'M'sauce, glass bottle, w. j. & f. barnes pty ltd melbourne, household -
Kiewa Valley Historical Society
Bottle - Sauce, 1940's - 1950's
Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it. Bottles were re cycled remaining the property of the manufacturer. History of Rosella Pres & Manuf. Co. Ltd.Historical: Change of bottles - shape, embossing, stopper Aesthetic: Display showing embossing and shapeClear glass bottle not quite round but oval with straight sides two thirds of the way up. The glass is clear for the first 2 thirds of the straight sides and then is patterned with long vertical ripples before it begins to taper in clear glass to the lip and the opening, which has a screw top. Embossed around the circumference along the bottom in printed capital letters and on the base.1 bubble in the glass on the tapered section. Side: 'Prop. of Rosella Pres. & Manuf. Coy. Ltd R.D.No. 9062' Base: Common seal on top (A with G and M inside) 'J367' across the middle and 'M' underneathglass bottle, sauce, rosella pres. & manuf. co. ltd., household -
Kiewa Valley Historical Society
Bottle - Sauce, 1935
Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape and size of the bottles changed as did the stopper used to seal it.Historical: Change of bottles - shape, size, stopper, embossing Aesthetic: Display showing shape and embossing.Medium sized clear glass sauce bottle with straight sides two thirds of the way up then tapering to the neck and opening. Sealed by cork which is loose inside the bottle. Embossed at the base. Base: Common Seal 'A' with 'G' at top and 'M' below inside the A. Underneath and across the middle 'M559' and beneath 'M' '211' on edgeglass bottle, sauce, household -
Kiewa Valley Historical Society
Bottle - Sauce, 1935
Sauce came in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape, colour, size of the bottles changed as did the stopper used to seal it.Historical: Change of bottles - shape, glass, stopper, size, embossing Aesthetic: Display shown embossing and shapeClear brown glass bottle of medium size used for sauce. Sealed with a glass stopper that has cork on the outside. It has straight sides for nearly two thirds to the top then tapers quickly into a long straight neck with a lip near the opening. Inside the opening is a lip. Embossed on base.Base: across the middle 'M 311' and below that 'M'glass bottle, household, glass cork stopper, sauce -
Kiewa Valley Historical Society
Bottle - Sauce, 1950's - 1960's
Sauce came in bottles bought at the local grocery store or in a large city store on a shopping expedition. The shape and size of the bottles changed as did the stopper used to seal it. The bottles were re cycled remaining the property of the manufacturer. History of Rosella Pres. & Manuf. Co. Ltd.Historical: Change of bottles - shape, glass, embossing, use Aesthetic: Display showing embossing and shape. Clear glass bottle used for sauce. Grooved straight sides two thirds of the way up, tapering to the lip at the top of the neck and screw top. Embossed on base around the circumference and in the middle. The print is in capital letters. A few very small bubbles in the glass. Base: 'The Prop. of Rosella Pres & Manf Coy Ltd' around the circumference. Base: Inside the above inscription: '15' at top, 'Reg. No. 25701'across the middle and below 'ISM - 100'sauce, glass bottle, rosella pres. & manuf. co. ltd, household -
Kiewa Valley Historical Society
Bottle - Sauce, Late 1920's - Early 1930's
Sauce and coffee / chicory was stored in bottles bought at the local grocery store or at a large city store on a shopping expedition. The shape of the bottles changed as did the stopper used to seal it.Historical: Change of bottles - shape, glass, stopper, embossing and use. Aesthetic: Display showing embossing and shape.Clear slightly green glass bottle used for storing sauce, coffee or chicory. The base is square with a slight indent inwards and has embossing. The straight sides go two thirds of the way, taper quickly to the neck and then form a lip and opening for a cork stopper. Glass badly blown with a defect about one quarter of the way up.Base: Common seal: 'A' with 'G' at top and 'M' below inside the 'A'. 'M711' across the middle and 'M' underneath. 'F18' on edge of one side.glass bottle, sauce, coffee, chicory