Index, bib, ill, maps, p.888.non-fictionThe 20th century is the century of communism and fascism, of debt and prosperity, of the United Nations and nationalistic fervour, of mass demonstrations and individual defiance; and also of the aircraft and the submarine, of the conveyor belt and the computer, of miracle cures and new diseases, and of radio and television. history - modern - 20th century, history - modern - 21st century

Napalm, white phosphorus, plague, cholera - and "ordinary" bombing with high explosives. These are everyday hazards for vietnamese peasandt. Martha Gellhorn puts the case against war by simply describing it. military history, modern - 20th century, war correspondents, vietnam

Gripping story of guerrilla warfare the men, the tactics and the weapons Guerrillas versus elite military forcesmilitary history, modern - 20th century, guerrillas - history - 20th century

Guerilla tactics are as old as warfare itself, and have always been the last resort of the weak against the strong.guerrilla warfare - history - 20th century, military history, modern - 20th century

p.398.non-fictionExplores the idea that the war of 1914-1918 continues and will shape the world in the 20th centurymodern history - 20th century, politics - 20th century

A pulley block of this size would have many applications on a ship, including lifting loads such as cargo and sails. It was recovered from the wreck of the Halladale in the 1970s by divers Gary Hansen and Peter Ronald, former Director of Flagstaff Hill. The Falls of Halladale was an iron-hulled, four-masted barque built in Glasgow, Scotland. It was used as a bulk carrier of general cargo. When the ship left New York in August 1908 it was bound for Melbourne and Sydney it’s the cargo in its hold consisted of roofing tiles, barbed wire, stoves, oil, benzene and many other manufactured items. On the 15th of November, 1908, after three months at sea and close to its destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland. The captain and 29 crew members survived but most of the cargo was lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not to any technical failure of the ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. The vessel was one of several designs of Falls Line of ships named after waterfalls in Scotland. The company had been founded between 1870- 1873 as a partnership between Joseph Russell, Anderson Rodger, and William Todd Lithgow. During the period between 1882-92 Russell & Co. standardised its ship designs, which sped up their building process so much that they were able to build 271 ships during that time. The Falls of Halladale had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales. It was one of the last of the 'windjammers'. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have huge seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions.The Falls of Halladale shipwreck is listed on the Victorian Heritage (No. S255). The vessel was one of the last ships to sail the Trade Routes from Europe and the Americas. Also of significance is that the ship was one of the first ships to have fore and aft lifting bridges as a significant safety feature that is still in use on modern vessels today. The block and pulley is an example of ship rigging equipment used on sailing ships during the 19th and early 20th centuries that transported goods around the world. It represents aspects of Victoria’s shipping industry and maritime history.A pulley block; metal frame with three sheaves. The block is in a fragile condition. It is also large and heavy. It was recovered from the wreck of the Falls of Halladale in the 1970s. warrnambool, flagstaff hill, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, flagstaff hill maritime museum and village, clipper ship, windjammer, cargo vessel, falls of halladale wreck, shipwreck, 1908 wreck, breakenridge & co glasgow, russell & co ship builders, 1886 ship, shipwreck artefact, rigging, ship rigging, rigging equipment, sailing equipment, cargo equipment, marine technology, block, ship’s block, pulley block

This deadeye was amongst artefacts recovered from the wreck of the Falls of Halladale. It would have been used on the ship to attach, hold and run ropes for the ship’s rigging. The Falls of Halladale was an iron-hulled, four-masted barque, used as a bulk carrier of general cargo. She left New York in August 1908 bound for Melbourne and Sydney. In her hold was general cargo consisting of roofing tiles, barb wire, stoves, oil, and benzene as well as many other manufactured items. After three months at sea and close to her destination, a navigational error caused the Falls of Halladale to be wrecked on a reef off the Peterborough headland on the 15th of November, 1908. The captain and 29 crew members survived, but her cargo was largely lost, despite two salvage attempts in 1908-09 and 1910. The Court of Marine Inquiry in Melbourne ruled that the foundering of the ship was entirely due to Captain David Wood Thomson's navigational error, not too technical failure of the Clyde-built ship. The Falls of Halladale was built in1886 by Russell & Co., at Greenock shipyards on the River Clyde, Scotland for Wright, Breakenridge & Co of Glasgow. She was one of several designs of Falls Line of ships named after waterfalls in Scotland. The company had been founded between 1870- 1873 as a partnership between Joseph Russell, Anderson Rodger, and William Todd Lithgow. During the period 1882-92 Russell & Co. standardised designs, which sped up their building process so much that they were able to build 271 ships during that time. The Falls of Halladale had a sturdy construction built to carry maximum cargo and was able to maintain full sail in heavy gales, one of the last of the 'windjammers' that sailed the Trade Route. She and her sister ship, the Falls of Garry, were the first ships in the world to include fore and aft lifting bridges. Previous to this, heavily loaded vessels could have heavy seas break along the full length of the deck, causing serious injury or even death to those on deck. The new, raised catwalk-type decking allowed the crew to move above the deck in stormy conditions. The Falls of Halladale shipwreck is listed on the Victorian Heritage (No. S255). She was one of the last ships to sail the Trade Routes from Europe and the Americas. Also of significance is that the vessel was one of the first ships to have fore and aft lifting bridges as a significant safety feature still in use on modern vessels today. The subject item is an example of ships rigging objects used on sailing ships during the 19th and early 20th centuries to transport goods around the world the item is representing aspects of Victoria’s shipping industry and maritime history. Deadeye; wooden deadeye, three (3) holes, with metal surrounds and metal rigging cable attached. Recovered from the Falls of Halladale.Nonewarrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, clipper ship, rigging equipment, sailing equipment, deadeye, falls of halladale wreck, breakenridge & co glasgow, russell & co ship builders, cargo vessel, 1908 wreck, rigging, ship rigging

Sharped Edged instrument used for cleaning hair from the skin. http://en.wikipedia.org/wiki/Straight_razor A straight razor is a razor with a blade that can fold into its handle.[1] They are also called open razors and cut-throat razors. HISTORY The first modern straight razor complete with decorated handles and hollow ground blades was constructed in Sheffield, England, by Benjamin Huntsman in 1740. Huntsman's process was adopted by the French sometime later. The English manufacturers were even more reluctant than the French to adopt the process and only did so after they saw its success in France.[5] Straight razors were the most common form of shaving before the 20th century and remained that common in many countries until the 1950s. TODAY Straight razors are still manufactured. DOVO, of Solingen, Germany, and Thiers Issard of France are two of the most well-known European manufacturers. Feather Safety Razor Co. Ltd. of Osaka, Japan makes a razor with the same form as a traditional straight, but featuring a disposable blade that can be installed through an injector-type system. Modern straight razor users are known to favor them for a variety of reasons. Some are attracted to the nostalgia of using old and traditional methods of shaving. It is a masculine ritual comparable to pipe smoking. Others profess an interest in reducing the waste of disposable blades.[11][22] Still others agree that straight razors provide a superior shave through a larger blade and greater control of the blade including the blade angle. Straight razors cover a much greater area per shaving stroke because their cutting edge is much longer than any of the multiblade razors. Ivory cut throat razor, with cream case 00121.3.Known as a straight razor.Razor with square point, full hollow ground 5/8” blade and double transverse stabiliser. The centre pin adds stability and rigidity to the handle---I think this is it ROM Parts The narrow end of the blade pivots on a pin, between 2 pieces of ivory forms the handle. LONG EXTRACT FROM WIKI _ SHORTEN to describe 00121 The parts of a straight razor and their function are described as follows: The narrow end of the blade rotates on a pin called the pivot, between two protective pieces called the scales or handle. The upward curved metal end of the narrow part of the blade beyond the pivot is called the tang and acts as a lever to help raise the blade from the handle. One or two fingers resting on the tang also help stabilize the blade while shaving. The narrow support piece between the tang and the main blade is called the shank, but this reference is often avoided because it can be confusing. The shank sometimes features decorations and the stamp of the country of origin. The top side and the underside of the shank can sometimes exhibit indentations known as fluting, or jimps for a more secure grip.[8] The curved lower part of the main blade from the shank to the cutting edge is called the shoulder.[9] The point where the shoulder joins the cutting edge is called the heel. A thick strip of metal running transversely at the junction where the main blade attaches to the shank is called the stabiliser. The stabiliser can be double,[10] single or can be absent in some razor models. The first stabiliser is usually very narrow and thicker and runs at the shank to blade junction, covering the shank and just spilling over to the shoulder. The second stabiliser can be distinguished since it is considerably wider and narrower, appearing after the first stabiliser and running lower into the shoulder. The non-cutting top of the blade is called the back or the spine while the cutting part of the blade opposite the back is called the cutting edge.[11] Finally the other free end of the blade, at the opposite end of the tang, is called the point and, sometimes, the head or the nose.[9][12] There are two to three pins in any handle. The middle pin, if present, is plastic coated and is called the plug.[13] Its function is to stabilise the sides of the handle so that they cannot be squeezed in the middle. When folded into the scales, the blade is protected from accidental damage, and the user is protected from accidental injury. During folding, the back of the blade, being thick and normally with a curved cross-section, acts as a natural stopper and prevents further rotation of the blade out of the handle from the other side shaving, lever, handle, blade, pivot, razor, tang

This book was given to Bill Rogers for his 8th birthday in 1927. Arthur George (Bill) was the grandson of Joseph Rogers, a Warrnambool plumber, and the son of Arthur and Agnes Rogers. Bill Rogers (d. 1995) worked in the advertising department of the Warrnambool Standard for nearly 50 years. He married Lorna Steller and they lived in MacDonald Street in South Warrnambool. This book is of interest as it belonged to Bill Rogers, a Warrnambool resident in the 20th century. It is also of interest as an example of the type of present given to an 8 year-old boy in the 1920s. This is a black leather covered book of 208 pages. There are two sections – The Book of Common Prayer and Hymns Ancient and Modern. The cover is partly detached from the binding and there is gold lettering on the front cover and spine. The pages are gilt-edged. There is a full page black and white illustration at the beginning of the text. The two inscriptions are handwritten in black ink. ‘To Billie on his 8th birthday 1927’ ‘Billie Rogers 32 McDonald St. Sth. Warrnambool’ bill rogers warrnambool, lorna steller warrnmbool, history of warrnambool

Bilson and Co. operated a general store in Murray Street, Colac with its history dating from 1884 to 1955. Originally founded by the Tulloh family it became known as Bilsons after 1889 when Franklin Bilson came from Allansford where he had operated a general store. Bilsons store became one of the largest stores in country Victoria. In 1952 Bilsons merged with Foy and Gibsons. and in 1955 the Foy Bilson business was sold. This label is of interest firstly because it is a memento of Bilson's stores an important 20th century business in country Victoria and secondly because Franklin Bilson and his wife, Fanny, both have their place in Warrnambool's history.Rectangular white label with dark blue text and some scroll decoration. It is adhered to a piece of pink card .DIRECT IMPORTERS OF DRAPERY DRESSMAKERS & MILLINERS TAILORS & OUTFITTERS GROCERS & GENERAL STOREKEEPERS WINE & SPIRIT MERCHANTS From Bilson & Co. MURRAY STREET, COLACcolac, drapers, tailors, dressmakers, milliners, grocers, wine and spirit merchants, general store, bilsons, foy bilson, fanny bilson captain of the allansford womens cricket team, franklin bilson

This label comes from the newsagency and stationery shop of James Deany. He took over the business of O.Gorman in Timor Street in 1901 and was in partnership with Robert Armstrong until 1906. His business was purchased in 1918 by Mrs Matilda Rowan. Deany was a Warrnambool Councillor (1911-1917), Mayor 1915-1916 and M.L.A. Victoria from 1917 to his death in 1927.This label is an interesting memento of the Timor Street, Warrnambool business of James Deany in the early 20th centuryThis is a piece of paper pasted on to another sheet of paper. The paper has white printing on a blue background with a blank space for an addressFrom J.D.Deany opposite P.O. Timor St. Warrnambool Bookseller, Stationer, Fancy Goods, Sporting Requisites Agent for Colonial Mutual Fire Insurance The Age Agency james d.deany, history of warrnambool, warrnambool councillor

This label comes from the business of James Earle. It was established in Liebig Street in the 1880s, taking over from A. Kentish. In the early 20th century it was known as Earle and Son. James Earle died in 1934.This label is of some interest as it is a memento of James Earle. His Warrnambool business was a prominent one in the late 19th and early 20th centuries. This is a cream-coloured piece of paper with cream-coloured printing on a green background. The paper is pasted on to a piece of pink card. From Jas. Earle - Fair Price – Clothier, Milliner & Draper Stocks Best Class Goods Liebig Street Warrnambool draper,, history of warrnambool

This perfume bottle has no known local provenance but ones like this would have been common in ladies' bedrooms in the late 19th and early 20th centuries. The use of perfume was important in those days of limited access to bathing facilities. Today more modern versions of perfume bottles are still in use though now they are not such a necessary item.This perfume bottle is retained for display purposes only.This is a small glass bottle with a silver-coloured metal attachment at the top forming a lid and a spray mechanism that includes a metal tube that goes into the bottle. The spray mechanism no longer works. The metal sections are tarnished.vintage accessories, warrnambool history

Maritime trades included making and mending nets. Netcraft skills have been taught and applied for centuries and are ongoing. Shuttles, or net needles, are used in the netting process, along with twine or cord, and a sharp knife or scissors. The twine is wound onto the shuttle and dispensed as the shuttle knots and weaves the cord to make the net. These shuttles are lightweight, compact and portable too. Nets were used on sailing ships for the crew's safety, often saving the sailor's lives in stormy seas Examples are the ship mast nets or shrouds that are wide at the base on the deck and taper to a point at the top of the mast, and railing nets that encircle the rails around the deck and prevent people and objects from rolling or falling into the sea. The shuttles were donated to Flagstaff Hill Maritime Village by the family of Doctor William Roy Angus, Surgeon and Oculist. It is part of the “W.R. Angus Collection” that includes historical medical equipment, surgical instruments and material belonging to Dr Edward Ryan and Dr Thomas Francis Ryan, (both of Nhill, Victoria) and Dr Angus’ own belongings. The Collection’s history spans the medical practices of the two Doctors Ryan, from 1885-1926 plus that of Dr Angus, until 1969. Nets were an essential part of the life-saving safety equipment on sailing vessels. The set of netting shuttles is an example of net-making tools used in the 18th to 20th centuries and continues into modern times to create and repair safety equipment. The shuttles are part of the W.R. Angus Collection, which is significant for still being located at the site it is connected with, Doctor Angus being the last Port Medical Officer in Warrnambool. Shuttles, set of three; wooden slats, one end pointed, the other a concave shape. The centre is cut-out, leaving a straight tab in the centre lengthwise. The set is part of the W.R. Angus Collection. warrnambool, shipwreck coast, flagstaff hill, flagstaff hill maritime museum, flagstaff hill maritime village, net making, net mending, net shuttle, net making tool, maritime trade, darning, shuttle, tool, 20th century, w.r. angus, weaving, netting shuttle, net craft, net needles, safety nets, safety equipment

A4, hardcover, 349pp, 300 illustrations, index, flags, funnels, hull colours, bibliography, full ships lists. Howard Dick, Iain Steverson, Mike Carolin, Barry Pemberton, Lindsay Rex, Rex Cox, Russell Priestnon-fictionAustralian National Line (ANL) began operations on 1 January 1957. It operated the largest fleet in coastal trade, ran passenger ships such as Princess of Tasmania and Empress of Australia that became household names, and from 1969 carried the Australian flag into international trades. ANL was at the forefront of innovation in bulkships, RoRo vessels and containerization, also in the redesign of ports and terminals. Many of its 110 ships were built in Australia. This impressive record of achievement eventually became overshadowed by financial woes, poor industrial relations and a difficult relationship with government that culminated in the sale of 1998-99. This fleet history, written and informed by the knowledge, experience and insight of those who sailed on and worked with the ships, weaves the stories of a complex forty-year transition from conventional shipping to modern bulk handling and containers, along with the nation-building role of the ANL, whose flag still flies proudly across the region as a subsidiary of the French CMA CGM. The book is lavishly illustrated with over 300 images, mostly in colour, and will become an essential source on Australia's 20th century maritime history.naa, anl, australian national line, interest group, shipping companies

This booklet contains details of the programmes for the Warrnambool Musical and Elocutionary Competitions in 1938, the fifth annual competition of its kind. The competitions were held over five days and attracted a great number of participants with the prizewinners receiving monetary prizes donated by local businesses and businessmen. The competitions included a spelling bee and an operatic aria competition with the latter offering a prize of £10. The adjudicator for the elocution competitions was John Howlett Ross (1857-1953) a Melbourne-born journalist and a noted elocutionist at that time. From 1924 to the early 1950s John Howlett Ross was a well-known A.B.C. radio broadcaster. Today the Warrnambool Eisteddfod conducts similar competitions annually. This program is of interest as an example of the popularity of music and elocution competitions in places such as Warrnambool in the first half of the 20th century. Also the local advertisements in the booklet are of considerable help to researchers today. This is a booklet of 20 pages with a white cover with green and red printing and a black and white photograph on the back cover. The pages contain many advertisements and printed information. The booklet was stapled but the staples have been removed.music and elocution in warrnambool, john howlett ross, journalist and elocutionist, history of warrnambool

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw blade with wooden handle attached with wingnut.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture.Compass saw with wooden handle and metal blade. Small teeth. flagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool, compass saw

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw with wooden handle broken and metal blade. Small teeth.Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool, compass saw

This book is a mid-20th century updated version of a manual with regulations and instructions for lighthouse staff and the supply of equipment and other goods that are necessary. It includes lists such as protective clothing required, fuel, when to raise a flag at half-mast, how communication must be carried out, the testing of equipment, and other similar information. It also contains templates for the Certificates of Service of various ranks such as Master and Mate. Australia no longer has manned lighthouses although some still have caretakers that report on the weather. The last manned lighthouse was in Tasmania and was de-manned in December 1995.The ultimate purpose of the book was to set down instructions that would be used to carry out life saving procedures, and to avoid shipwrecks. It confirms some earlier methods and updates others. The information within the book is similar to the information referred to by the 19th century and early 20th century lighthouse keepers and staff, and others involved in the preservation of life, such as those published by the Department of Ports and Harbours. The book is a valuable resource to those researching the evolving of maritime history from Colonial Australia to the modern day.Book, orange vinyl surface sealed cover on hard covered ring-binder. Gold embossed title on spine and front cover. Contains cream loose-leaf pages with rounded corners. Pages are printed with text, tables and diagrams, and are numbered with serial page and paragraph numbers. There is a Table of Contents and an Index. The cover displays the Coat of Arms of the Commonwealth of Australia. Published by the Commonwealth of Australia in 1968 for the Department of Shipping and Transport, the book contains the Standing Orders to Masters and Crews of Lighthouse Tenders. It has examples for Certificates of Service for various ranks, a list of books and forms, protective clothing, rates for passengers, and a Scheme of Colour Painting for Lighthouse Tenders.Coat of Arms [Commonwealth of Australia] "COMMONWEALTH OF AUSTRALIA" "DEPARTMENT OF SHIPPING AND TRANSPORT" "STANDING ORDERS / TO / MASTERS AND CREWS OF LIGHTHOUSE TENDERS" "No 1/1968" "No.2/1968"flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, shipwrecks, life saving, lifesaving, shiipping and transport, commonwealth of australia, standing orders, lighthouse crew, lighthouse tenders, masters and crews, 1968

A saw is a tool consisting of a tough blade, wire, or chain with a hard-toothed edge. It is used to cut through material, very often wood, though sometimes metal or stone. The cut is made by placing the toothed edge against the material and moving it forcefully forth and less vigorously back or continuously forward. This force may be applied by hand, or powered by steam, water, electricity or other power sources. An abrasive saw has a powered circular blade designed to cut through metal or ceramic. In ancient Egypt, open (unframed) saws made of copper are documented as early as the Early Dynastic Period, circa 3,100–2,686 BC. Many copper saws were found in tombs dating to the 31st century BC. Models of saws have been found in many contexts throughout Egyptian history. As the saw developed, teeth were raked to cut only on the pull stroke and set with the teeth projecting only on one side, rather than in the modern fashion with an alternating set. Saws were also made of bronze and later iron. In the Iron Age, frame saws were developed holding the thin blades in tension. The earliest known sawmill is the Roman Hierapolis sawmill from the third century AD used for cutting stone.The subject item is believed to date from around the mid to late 20th century and is regarded as a modern item. The maker is unknown but the pattern or design and type of wood used indicate it is a tool of modern manufacture. Compass saw blade with wooden with open handle blade attached with wingnut lever at side to adjust long narrow blade Noneflagstaff hill, warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wood cutting, wood saw, cross cut saw, cabinet makers tools, wood working tools, tool

maps, p,498.non-fictionForty gripping accounts of battles from the Boer war to Desert Stormbattles - history - 20th century, military science

Index, ill (col), maps, p.288.non-fictionEvery major conflict since 1939 is discussed and analysedmilitary history - 20th century, world conflict - 1939 -

This is a label from the business of Melsom Hemmons, a Warrnambool dentist in the late 19th and early 20th centuries. He had a practice at first in the chemist’s shop of Richard F. Kennedy in Timor Street and was later in Kepler Street.This label is of interest as a memento of a prominent dentist with a business in Warrnambool a hundred years ago. This is a small white card with a black border, black and red printing and some decorative patterns.M. Hemmons Dental Surgeon, W’bool Antiseptic Mouth Wash for Cleansing and Hardening the Gums melsom hemmons, warrnambool dentist, history of warrnambool, label

Index, p.519.non-fictionThirty seven contributions analyze guerilla movements between 1941 and 1961guerrilla warfare, military history - 20th century