THE CARRON COMPANY The Carron Company established its ironworks on the banks of the River Carron in Falkirk, Stirlingshire, Scotland, in 1759, and became an incorporated company in 1773. The company was the largest ironworks in Europe during the 19th century. It supplied ammunition and armaments, steamboat engines, pig iron, cast iron goods such as flat irons, balustrades, fire grates and bath tubs, pillar boxes and telephone boxes, and even cast iron rings for underground tunnels. In 1982 it became insolvent and was taken over by the Franke Corporation, using the brand Carron Phoenix.This iron is representative of the domestic appliances used throughout Australia up until electricity became widely available for domestic use.An antique Carron iron made of solid cast iron. These types of iron were nicknamed "sad irons" from the Old English where "sad" was originally a word which meant "heavy and solid". Typically, there would be two irons simultaneously in use: one to iron with and one being heated up on the stove or in the fire. This iron has a flat bottom and back and it curves to a point at the front. It has a goose neck handle which has a twist. Irons such as this were often given the name "goose" irons. Near the front of the iron on its top '11' is marked. These irons were used from the late 18th to mid 20th centuries before electricity was widely available in all areas, particularly in rural environments.On top of iron "CARRON"flat irons, domestic appliances

drainage rod used to unblock drains and clean them from vine roots steel long rod with a spiral end block drainage rod, block, horticulture

This item is part of the Federation University Art Collection. The Art Collection features over 1000 works and was listed as a 'Ballarat Treasure' in 2007.art, artwork, ramos, rod ramos, sculpture

ill, maps, p.87.non-fictionA history of the Hamersley Iron Railway for Iron Ore in the Pilbara region of Western Australia.railroad construction - western australia - history, railroads - freight - australia

This iron was given to Isobel and Stan Campbell by another woman in Boort Victoria pre 1999 as per the letter attached with the Donation form. These irons were manufactured in Australia as per the printing on the cardboard box and instruction sheet. These self-generating gas irons used methylated spirits in the small tank at the back of the iron. The irons would have been used prior to electricity being available to be connected to a house and used for ironing clothes and other woven material items used by the members of the household.Brown cardboard box with separate lid with black printing on the front and back of box and lid. A heavy silver iron with 13 holes along each side there is a black handle screwed to top of iron and a small round container attached to the back. An instruction sheet. Box front and back - The "STAR"/Self-Generating Gas iron/(Registered)/Is Made In Australia!/By Australian Workers!/From Australian Material!/ Instruction sheet - MADE IN AUSTRALIA/.../The "STAR' is the most economical Iron ever put on the Market , and/being manufactured of the best materials only, will last a life-time./...social history, domestic appliance, irons, george evans collection, isobel campbell, 1990s

Bell from the "Iron Spencer" , Melbourne 1956IRON SPENCER MELBOURNE/ S.S IRON SPENCER LAUNCHED BY/ MRS L.G.DARLING/23rd MAY 1956 "PWO 2113"

256 page book by Rod Gilbert. On page 25 there is reference to Schwerkolt Cottage and a Blackburn subdivision in 1913non-fictionWW1 record of Private Leslie Raymond Talbot Gilbertgilbert rod, gilbert leslie raymond talbot, world war 1914 - 1918, walsham road blackburn

This iron would have been used mostly by women either travelling, in hotel rooms etc, or on an occasion when only one or two small items were needed to be ironed. It has been superseded by electric irons. This is an attractive item and is retained as a fine example of a travel iron used about 90 years ago. This has a rectangular-shaped metal base with pointed ends (in the shape of a conventional ironing plate). The top of the plate is indented. A piece of metal (chrome-plated), with a hinged lid, partially slides out from the top of the plate and this is used to hold the meta tablets (methylated spirits) or coal. The top of this plate is used to extinguish any coals or flames. This piece of metal is partially enclosed in an open metal container. The wooden handle of the iron is affixed to the top of this container. ‘British Boudoir Iron’ ‘World Pats Granted or Appd for BCM WS4C’ household items, history of warrnambool

This fishing rod was donated to the Wodonga Historical Society by Mr. David Brown who is a retired Victorian Railways driver. It was made for him by Mr. Jack Bowden in 1962. Mr. Bowden was the driver of the Southern Aurora when it crashed with a freight train at Violet Town on 7 February 1969. The Sydney – Melbourne passenger train was bound for Melbourne. At about 7.05 a.m. the “Southern Aurora” collided head-on with the Melbourne-Albury goods train near Violet Town. 8 people lost their lives in the crash and 117 were injured. Driver John Bowden had died of cardiac arrest at some time before the collision. The driver of the goods train, Lawrence Rosevear, a good friend and workmate of Jack Bowden had tried to apply the brake when he realised the Aurora was not slowing down, but was unable to stop the impact. Lawrence also died in the crashThis was made by a local train driver who was died in the "Southern Aurora" train tragedy.A hand made fibre-glass fishing rod with wooden handle and agate runnersfishing, fishing equipment, recreational fishing, southern aurora

Gem irons were heated before adding batter. The design was unchanged for many years. Also known as drop scone iron.Cast iron gem scone iron, for 12 sconesgem irons, baking utensils, cooking

Rodney Ross Scoullar was born on 02/01/1953 and attended John Knox Presbyterian Church. After studying geology, he began studies at the United Faculty of Theology in 1981. He was ordained at Bentleigh Uniting Church on 17/12/1984. His ministry included Balmoral, Queenscliff High School chaplaincy, Haileybury chaplaincy, and Geelong College chaplaincy. He began placement at Cowes St John's.B&W photograph head and shoulders."Rod Scoullar C&N 30/1/95 pagae 14"scoullar, rod, reverend

Small corroded rod with square shaft end to endarchaeology, historic building, former royal mint

Corroded rod with a square shaped shaft end to end.archaeology, historic building, former royal mint

Black and white postcard image of children with rods and musical instruments. This photograph mainly shows the girls' rod team, members of the boys' fife and drum band can be seen to the right.drum and fife bands, schools, linton state school no. 880, primary schools

Collection of 20 corroded rods (nails) rectangular from end to end. archaeology, historic building, former royal mint

The company Morphy Richards was founded in 1936 in the United Kingdom by Donal Morphy and Charles Richards. The company developed the first electric iron in the UK.Intact appliance with original warranty and packaging.Iron (electric) - Morphy-Richards Safety Control Electric Iron, in original packaging with instructions for installing and using, and Warranty.domestic equipment, electric irons

The artillery piece of the cannon was cast at the Low Moor foundry in England in 1861. It is a 68 pound muzzle loading cannon, capable of firing a 68 pound weight projectile. The arrow on the top of the barrel is the symbol of government ownership. It is probably one of the artillery pieces purchased by the Victorian government in response to the 1863 report by Captain Scratchley, which recommended 19 such artillery pieces be bought for the defence of Hobsons Bay, (Williamstown, Melbourne) (Billets p.12). It was possibly brought to Warrnambool in the late 1860s or the 1870s, to be used for training purposes by volunteers and local militia. The wrought iron runners were probably added to the slides at a later date. This model of carriage had been manufactured since 1855, and the traversing slide since 1860. The traversing slide of the wooden carriage absorbs the recoil when the gun is then returns to the gun to its original position for loading and re-firing. The properties of the timber (regarded as being Burmese teak) have helped to preserve these carriages in Australia. This particular carriage and traversing slide would have been manufactured about the same time as the gun (in 1861) in the Royal Carriage Department of the Royal Gun Factory in Woolwich, England. The gun would then have been assembled on the traversing slide of the carriage, then despatched as a unit. The wooden slide compressor mechanism that belongs to the cannon was used to limit the recoil when the cannon was fired. It is now stored separately for purposes of preservation. It is extremely rare, as it is the only one surviving in this group of South Western Victorian cannons.This 68 pdr cannon, mounted with its original wooden carriage, is part of the South Western Victoria collection of surviving 19th Century artillery pieces, item number W/F/02. It is rated as EXTREMELY RARE on a State, National and World level. The 68 pound smooth bore cannon of this period are not particularly rare either in Australia or overseas; its significance lies in its Victorian provenance and as an element in a major collection of 19th century cannon. The number of surviving carriages with traversing slides in this group in South Western Victoria is unique in Australia and probably in the World. Out of 10 such platforms surviving in Australia, the South Western Victorian group has half. Several survive around the world but probably not in such a large group. The wooden sliding compressor mechanism belonging to this cannon is extremely rare, and the only one in this South Western Victorian group of Guns and Cannons. As a whole, this cannon has undergone very little restoration or modification, giving it a high level of integrity.Warrnambool Garrison Cannon. 68pdr smoothbore, muzzle-loading, cast-iron cannon. Manufactured in Low Moor, 1861, No. 10310. Mounted on the wooden carriage with wrought iron traversing slide and wrought iron runners and fittings. The cannon's Cascabel is cast with a loop. The wooden slide Compressor Mechanism, or Recoil Mechanism, is extremely rare. This mechanism comprises two equal-sized sections of wood, one on each side of the centre, joined by metal rods. In the centre of this wooden platform, with openings, top and bottom is a 15cm diameter metal cylinder with two cusps on the edge of the top (this wood has split over time). Two parallel sides each have two 1cm thick metal "L' plates attached 15cm long and 8.5cm wide. With the unit is ‘ L’ bracket, curved bracket and bolt head.Cannon trunnion "LOW MOOR / 10310 / 1861" Top of the barrel "7045, (symbol of an arrow pointing up), 95 – 3 – 14, 1861, 209" Cascabel "CV / N / C" The rear of left-hand slide " "OD” “JW” “No 33” Side chock – “JW” twice. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, muzzle loading cannon, 68 pound cannon, low moor foundry, royal gun factory, warrnambool militia, warrnambool garrison volunteers, warrnambool fortifications, wooden sliding compression mechanism, carriage and traversing slide, 19th century cannon, traversing platform, garrison sliding carriage, 68 pounder

Coastal Barometer No. 5 was installed on the Queenscliff pier in 1866. The purpose was to provide weather data to the Professional Fisherman. It was later installed in the slipway winch shed. Instrument is housed in a cast iron case.Only one left in existanceCoastal Barometer No. 5 was installed on the Queenscliff pier in 1866. The purpose was to provide weather data to the Professional Fisherman. It was later installed in the slipway winch shed. Instrument is housed in a cast iron case.Instrument: J Grimaldi, Case: Langlands Broscoastal barometer, queenscliffe, fishing industry

Hotpoint Irons were first developed in 1903 in California. The invention was named Hotpoint, after the heating elements that converged in the iron's tip, allowing it to be used to press around buttonholes and in and around ruffles and pleats on clothing and curtains.Early electric iron manufactured under license by Hotpoint Australia. The iron has a metal base into which a separate power cord is plugged. The iron has a wooden handle.Label: " Hotpoint. Made in Australia. Licensed by Edison Elelectric Appliance Co. Inc. Chicago, U.S.A. Cat.915 F61. W.575, W200."hotpoint -- australia, electric irons

Hotpoint Irons were first developed in 1903 in California. The invention was named Hotpoint, after the heating elements that converged in the iron's tip, allowing it to be used to press around buttonholes and in and around ruffles and pleats on clothing and curtains.Early electric iron manufactured under license by Hotpoint Australia. The iron has a metal base into which a separate power cord is plugged. The iron has a wooden handle. Missing cord.Label: " Hotpoint. Made in Australia. Licensed by Edison Elelectric Appliance Co. Inc. Chicago, U.S.A. Cat.915 F61. W.575, W230."electric irons, hotpoint australia

Carrol Preston has used newspaper references from 1877 through to 1917, to document the history of the Orbost - Bairnsdael railway line.. It starts with the lobbying and jockeying, and moves through to the opening in 1916. The title is a reference to plans to further extend the railway beyond Orbost - but "The Iron Horse stopped at Orbost Railway Station". Most articles are from the Snowy River Mail and Bairnsdale Advertiser. All newspaper articles are dated and sourced. About 1912 work began at Newmerella on clearing the track for the railway line from Bairnsdale to Orbost. A canvas town sprang up on the higher land adjacent to the river flats. Local farmers supplied meat, milk and fresh produce to the camp, as well as gaining employment carting and labouring. The line opened in 1916, the Orbost railway station being built on the Newmerella side of the river.This item is associated with the history of the Orbost-Bairnsdale railway line and therefore reflects the role that the rail line played in the social and economic history of Orbost. On April 10 1916, the first scheduled train service left Orbost for Bairnsdale. The Bairnsdale-Orbost railway was opened to serve the agricultural and timber industries. This book has been compiled by a local historian. A spiral bound book titled, "The Iron Horse Stopped at Orbost Railway Station". The cover is blue / green with the title in black and red print. Underneath is a railway track leading to the bottom of the page. The book is 110 pages, A4 size and contains maps and photos. in black print on cover - "The Iron Horse Stopped at Orbost Railway Station ; The newspaper story of the eventual construction of the ORBOST RAILWAY LINE (in red print); Compiled and produced by CARROL PRESTON (in white print)railway-transport orbost-bairnsdale-railway east-gippsland-railway

Captain Benjamin Francis (Frank) Helpmann was once the owner of the S.S. CHAMPOIN, then owned it in partnership with S. G. Henty. S.S. CHAMPION was an early steamship and one of the first coastal traders to operate between Melbourne and Portland in Victoria from December 1853 until August 1857, when she collided with the S.S. LIRDY BIRD in the open sea off Cape Otway. CHAMPION was returning from Melbourne, and sank with thirty-two people still on board. The thirty others were saved by the LIRDY BIRD (ref. The Story of a Port : Portland, Victoria, by Noel F. Learmonth)This picture Lithograph) is associated with the S.S. Champion, which is listed on the Victorian Heritage Database VHR S110. The wreck of the SS Champion is significant historically as one of Victoria's worst shipwrecks. As an early steamship it played an important part in the development of and communications between the Western district and Melbourne . Although the site has not yet been located it is predicted to be highly significant archaeologically with the potential to yield information about early coastal shipping and the western district passenger and cargo trade. It is significant technically as an example of an early iron screw steamship, and is part of the western district steamship resource including the SS Casino, SS Coramba and SS Julia Percy.Painting. Lithograph of the schooner S S Champion, hand coloured watercolour, in a cedar frame behind glass. Unusual cross member bracing on the corners of the frame (one missing). Title "Iron S.S. Champion Frank Helpmann Esq. Comr" (in script) on bottom of picture.On the bottom of the painting "Iron S.S. Champion" (in printing), "Frank Helpmann Esq. Comr" (in script) shipwrecked coast, flagstaff hill, flagstaff hill maritime museum, maritime museum, shipwrecked artefact, flagstaff hill maritime village, shipwreck coast, warrnambool, lithograph, frank helpmann, henty

Cricketer W.G. Grace said the City Oval was the 'most English' of any grounds he had played on in Australia. The City Ova Grandstand was constructed in 1898 to the designs of Clegg, Kell and Miller. The arched roof is supported by iron columns with cast iron brackets. Three squat lanterns are a feature of the roof, and support flagpoles. The cast iron balustrading at the front of the grandstand features a sunflower pattern, and the upper tiered section covers dressing rooms and internal stairways. Registered by Heritage Victoria, it is significant as a large and intact grandstand. The design, especially the roof, is unique in Victoria and the setting is enhanced by the ancillary ticket boxes and nearby mature trees. It was classifed by the National Trust on 11 June 1981. Colour photograph of the iron work at the Ballarat City Oval Grandstand.grandstand, ballarat city oval, cast iron, iron lace

Photograph shows the main features of the iron mine smelter site. These include the tramway, with mine tub, the smelter, complete with the overhead track to the charge port at the top. Photograph provides detailed information operation of the smelterReproduction of original photograph of Lal Lal Iron Mine c1880lal lal smelter, tramway from mine, tramway to top of furnace for charging

In 1951 Victoria commemorated 100 years of the Victorian Parliament. A protective lined keepsake box contains a black rod (in two parts) with a small plaque: "Presented by [the] silver and electroplate ware Manufacturers Association. Made by Harold C. Hutchinson, Eltham. It was first used in 1954. Black Rod is best known for their part in the ceremonies surrounding the State Opening of Parliament and the Speech from the throne. They summon the Commons to attend the speech and lead them to the Lords. As part of the ritual, the doors to the chamber of the House of Commons are slammed in the approaching Black Rod's face. This is to symbolise the Commons' independence of the Sovereign. Black Rod then strikes the door three times with the staff, and is then admitted and issues the summons of the monarch to attend. - Wikipedia This photo forms part of a collection of photographs gathered by the Shire of Eltham for their centenary project book,"Pioneers and Painters: 100 years of the Shire of Eltham" by Alan Marshall (1971). The collection of over 500 images is held in partnership between Eltham District Historical Society and Yarra Plenty Regional Library (Eltham Library) and is now formally known as 'The Shire of Eltham Pioneers Photograph Collection.' It is significant in being the first community sourced collection representing the places and people of the Shire's first one hundred years.Digital imagesepp, shire of eltham pioneers photograph collection, eltham, black rod, harold c. hutchinson, victorian parliament, parliament house, ceremonial, ceremony, box

Social/ political, legalColour photo, Interior Buninyong Courthouse, view of wood-lined ceiling, with painted ceiling rose and brass support rod for lights.buninyong, courthouse, buninyong council chamber