Malcolm Moore No. 1015 One of a Batch of 92 such rail tractors built. Builders Number 1015. Built for the Australian Army in 1943 Built for the Australian army - delivered to Army on the 3 March 1944 and was sold to the State Rivers and Water Supply Commission at Red Cliffs, Victoria. - used at the Red Cliffs Power station to haul briquettes from the rail siding Red Cliffs to the Red Cliffs Power Station and also used for shunting and some haulage from the Red Cliffs siding.. This rail tractor was originally powered by a Ford side valve V8 petrol engine. It arrived at the Museum from Red Cliffs in 1977 and is operational. Originally equipped with a Ford side valve V8 Later replaced by a Fordson Major diesel tractor engine.Historic - Narrow Gauge Industrial Railway - used by the Australian Army, and the State Rivers and Water Supply Commission at Redcliffs, Victoria, AustraliaMalcolm Moore No.1015 - Malcolm Moore Rail Tractor 0-4-0 Malcolm Moore Rail Tractor - Steel (Painted)Malcolm Moore Rail Tractor 0-4-0 Malcolm Moore 2' Gauge 1015puffing billy, malcolm moore, ford v8, rail tractor, fordson, australian army, state rivers and water supply commission, 2' gauge, industrial narrow gauge railway

Two blue and white embroidered badges for Malcolm Moore Pty Ltd with off-white cloth backing.Moorebuilt environment - industrial, industry, engineering, costume, malcolm moore pty ltd, norm robinson

Malcolm Moore No. 1013 Four wheel Diesel Rail Tractor Gauge 2'0" Malcolm Moore rail tractor (Builder’s Number 1013) It was built for the Australian Army in 1943. It was sold to the Inkerman Sugar Mill in Queensland around 1948 for hauling cane and shunting at the works. This rail tractor was originally powered by a Ford side valve V8 petrol engine. It was purchased from the Inkerman Mill of Pioneer Sugar Mills in 1982. Historic - Industrial narrow gauge Railway - Diesel Rail Tractor - used by the Australian Army and Inkerman Sugar Mill in QueenslandDiesel Rail Tractor made of iron and wrought irondiesel rail tractor, puffing billy, inkerman mill, industrial narrow gauge railway, gauge 2’0”, inkerman sugar mill, australian army

Photocopy of poster of Australia's first motor grader, with printed history outline. Malcolm Moorebuilt environment - industrial, business and traders - engineering, malcolm moore pty ltd, norm robinson

"Grace Blake’s conversations with older members of the Club have elicited the following information during July 2014: • Don Christie recalls the machine being acquired by (or donated to) SMRC in the 1960s. SMRC later donated it to APRC. • Bob Duncan remembers it being at APRC. • Max Shaw joined the club in 1946 but doesn’t recall it at all. • Peter Watson recalls collecting the rowing machine from the old APRC club house before its demolition (c. 1995). The AP-SMRC machine carries a ‘maker’s plate’ with the name Moore... Moore Crane and Engineering Company Pty Ltd was a subsidiary of Malcolm Moore Industries Ltd whose manufacturing engineering works were located on Williamstown Road, Port Melbourne from 1927. The founder established the main business in 1921 and retired in 1953.21 The business was delisted from the Australian Stock Exchange in 1976. Grace Blake advises that some of the earlier SMRC members were plumbers and therefore worked in trades connected with engineering. She reports that Peter Watson recalls some of his contemporaries completing their engineering apprenticeships at Malcolm Moore Industries Ltd in the 1970s. There are still many unanswered questions concerning the history and provenance of the rowing machine at the time of writing this report, but the connection with a local engineering works is certainly fascinating. Questions to explore in the future include: Did Moore manufacture the machine, or import it (and perhaps assemble it) under licence? Was this machine a ‘one-off’ or did Moore make / distribute others within Australia? When, why and how did SMRC acquire the machine? Why did SMRC decide not to retain it, but to pass it over to APRC? And how did APRC use it?" 2014 Significance Assessment, pp38-40. "The ‘Moore’ Rowing Machine at the Albert Park – South Melbourne Rowing Club (AP- SMRC) is a rare example in Australia of the Kerns patent design from 1900. This machine may not, however, be that old in construction or use. The AP-SMRC machine is almost intact, appearing to lack only the leather straps for fastening the rower’s feet to the foot-rests. Spalding manufactured the design in the USA in the early decades of the 20th century, but the metal elements in its models are traditionally black. The bright red paint on the AP-SMRC machine suggests something different. The AP-SMRC machine carries a maker’s plate that associates it directly with a local engineering business, Malcolm Moore Industries Ltd of Williamstown Road, Port Melbourne. Club members recall the machine being at the South Melbourne Rowing Club in the 1960s, and being transferred at a later date to the Albert Park Rowing Club. The machine has not been used since the founding of the amalgamated AP-SMRC and requires careful conservation. The ‘Moore’ rowing machine is of national research significance as a rare survivor, in Australia, of the well-regarded Kerns patent design that was popularised by Spalding in the northern hemisphere. The English River and Rowing Museum website quotes a testimonial from an AG Spalding & Bros’ Mail Order Catalogue: ‘This machine was described by ‘an experienced oarsman’ ... “to be the most perfect rowing machine ever produced”. A feature was the adjustment of the resistance so “the weaker sex can use the machine”’. Its historic significance lies in its rarity (and perhaps uniqueness) as an aid to the training of rowers at two successful clubs on Albert Park Lake. Additional historic significance lies in the connection that the rowing machine represents between local rowing clubs and a major local manufacturing engineer. The ‘Moore’ rowing machine bridges the realms of innovation and application, of industry and recreation, of land-based and aquatic sports, and of two neighbouring rowing clubs on the Albert Park Lake." 2014 Significance Assessment, p43"A rowing machine that appears to be built to the Kerns patent design from 1900 but may not be that old in construction or use. The machine is heavy and includes parts made from cast iron. The cast iron components are painted in a distinctive bright red. The wooden seat moves on timber slides. Resistance is created by spring mechanisms at the ends of two frame elements that connect with two wooden ‘oars’, and by the central chain-driven system that co-ordinates with the rower’s movements. The machine carries a maker’s plate with the single word ‘Moore’ in an oval design, using white letters against a navy background, fastened to the base board and close to the foot-rests." 2014 Significance Assessment, p38Moorerowing, apsm rowing club, significance assessment, malcolm moore industries ltd, kerns, 1900, sculling machine, albert park rowing club, south melbourne rowing club, albert park lake, rowing machine, ergo

TACL-Tractor Appliance Company Limited TACL rail tractors manufactured by Malcolm Moore of Port Melbourne Located in the Parishes of Moondarra and Telbit, Gippsland, the tramway terminated at Collins Siding on the Moe Walhalla 2'6"gauge branch of the Victorian Railways. Its construction by the Forests Commission of Victoria was to facilitate the extraction of timber from the Southern and Western slopes of Mount Erica and to replace the outlet tramways destroyed during the disastrous forest fires of February 1926. Tyers Valley Tramway The line, following the Eastern arm of the river, passed Ingrams Siding (7m.) to terminate at a forest area, known as "Ten Acre Block", 8m. 60c. from Collins Siding. The western branch of the line followed the Western Tyers Valley to Growlers Creek, 13m. 40c. from Collins Siding. THE T.A.C.L. TRACTORS at Tyers Valley tramway. On the 19th January 1928, T.A.C.L. locomotive, purchased from Tractor Appliance Co. Ltd. (Malcolm Moore), was delivered. This unit had a 20 h.p. Fordson engine coupled by a chain drive to the two axles, providing a tractive effort of approx. 2000lbs. Wheelbase was 5’ and weight was four tons. It was intended that the two tractor locomotives, working with the grade, would deliver timber from the branch lines to Tyers Junction, from which place it would be steam hauled out to the Collins Siding transfer point. Following a breakdown of the steam locomotive, haulage during the early months of 1928 was carried out by the T.A.C.L. unit, supplemented by the Nattrass, which was, by this time, becoming unreliable. During April 1928, after ensuring that no suitable locomotive was available in Australia, an order was placed with the Climax Manufacturing Co., U.S.A. for the supply of a geared locomotive. A second T.A.C.L. engine was purchased during May and, on the 27th, the local mill owners, having obtained running rights on the tramway, commenced haulage with the Harman. The three tractor units worked the branch lines and transported ballast, whilst the Harman hauled the timber to Collins Siding in rakes of eight trucks (56 tons). The weekly loading of the line for the first, second and third weeks were 54, 62 and 71 trucks respectively. info from : http://www.nmra.org.au/tyersvalley/Tyers-Tram.html Historic - Industrial Narrow gauge Railway - Timber working - Rail Tractor used by the the Forests Commission of Victoria on the Tyers Valley TramwayRail Tractor with Fordson engine coupled by a chain drive to the two axles - made of steel and wrought ironerica sawmill, puffing billy, tacl, rail tractor, tractor appliance co. ltd. (malcolm moore), industrial narrow gauge railway, tyers valley tramway, forests commission of victoria

Oval shape, blue and silver metal signplate for Moore Pty LtdMoorebuilt environment - industrial, industry, engineering, malcolm moore pty ltd, norm robinson

Collected by donor's father Norm Robinson during his 40 year employment with Malcolm Moore between 1948 and 1988.Photos of worksites, machinery, manufactured equipment for Malcolm Moore's. Selection taken from photo album now returned to donor. Moore's premises were in Williamstown Road (approximately where Bunnings is now)industry, built environment - industrial, norm robinson, malcolm moore pty ltd

Blue printed plan view of Malcolm Moore Crane Factory with lettered index of areas within the factory from 1979 some with names listed including Norm (presumably Norm Robinson).built environment - industrial, industry, engineering, malcolm moore pty ltd, norm robinson

Greater Port Melbourne - Official Souvenir of the 1939 Port Melbourne Centenary Celebrations Committee. Red and black 56 page book containing details of the Liardet festival, and local advertisements (2 copies)celebrations fetes and exhibitions, religion - anglican (holy trinity), religion - wesleyan methodist church, religion - roman catholic church (st josephs), mayors, town clerks, james peter crichton, sydney sims anderson, henry melville fennell, wilbraham frederick evelyn liardet, wfe liardet, caroline frederica liardet, edward james 'jack' holloway, j kitchen & sons pty ltd, swallow & ariell ltd, general motors-holden, gmh, neal's motors, port melbourne yacht club, pmyc, sandridge golf club, port melbourne football club, pmfc, port melbourne cricket club, port melbourne baseball club, nightingale supply co ltd, malcolm moore ltd, joe nield, harold v drew, j p burke, wilson electric transformer co, daniel scott pty ltd, a t harman & sons pty ltd, concrete constructions, cindcrete brick co, schumacher mill furnishing works

Invoice Dr to Malcolm Moore Ltd, Engineers and Contractors, to Mr H. F. Pearson, Wonga Road, Ringwood, Victoria. Receipt with Victorian duty stamp attached - July 1944 1 new English Fordson Tractor, 4.3 gear box complete with radial drawbar,choke control, steel wheels with Duplex grips fitted. Orchard type fittings. £338.10.0 Less Allowance £13.17.0. Total amount and receipt £324.13.0.

1st Quarterly Bulletin produced of Kimberley Region stories and events in Victoria of the time. Bulletins produced until Distribution to This is the 1st Bulletin produced by Victorian Section relating to Corporate and historical significanceSmall 12 page A5 printed book. Journal articles from President, Annual meeting, Obitiuary Malcolm Moore,Guest Speaker W. A. Minister, Admiralty Gulf - Mitchell Plateau, Wyndham-Kununurra, RFDS Operations in the Kimberley,Man Lost on Drysdale River, Profile A.S. McLaughlan, Country Women's Association/ West Kimberley Air Branch, Donations 01/10/69-31/01/70 bulletin, newsletter, rfds victorian section, kimberley region, donations

Black and white photograph "Attached to photograph" List of names, supplied by Jenny Hall nee Parker. Back Row - L to R: Glenn Pope, David Green, Russell Rogers, Peter Hayes, Colin Greeves, Ian Barnes, Graeme Reynolds, Peter ?, Keith Lancaster. 2nd Row - L to R: Jenny Hall, Kerry Malcolm, Lucia Ziole, Kim Jordan, Lynda Cook, Joyce Weaver, Janice Louttit, Joy Hall, Pam Weeks. 3rd Row - L to R: Michael Brown, ?, John Moore, Bruce Pumpa, ?, Gary Saffron, Daford Roberts, David ?, Mark Hopping. Front Row - L to R: Roslyn Dorien, Josie Trotter, Lynette Lightfoot, Jenny Walters, Beulah Connell, Cheryl Smilie, Maria Maraffa, Bronwyn Kenny, Margo Johnstone. Teacher : Mr Treloar