Photograph of an unknown male with a beard in a Military Uniform, he has a badge on his upper left arm and two medals, one of which is depicting Queen Victoria. He is wearing a sash across his left shoulder to under his right arm. The front of the tunic is fastened with round brass? ButtonsBartlett Bros. Bendigoperson, individual, military uniform, military uniform, bartlett bros.

Black and White photograph of a young H.R.H. Prince of Wales in a military uniform with walking stick & cigarette in hand, standing in the snow, mounted under glass in a slim brown wooden frame, markings on rear of photo read 'Arcade Art Gallery Bendigo Art Pictures and Framing, L Pattern (Late AIF)'person, individual, portrait, military uniform, military person, military

Issued while serving in the Australian Army. It was not worn and was out of season on his return to Australia.Components of military uniform, comprising the following: Cotton Shirt Size 36 Summer ,Trousers Size 30 Waist Summer, Woollen Trousers Size 30 Waist Winter, Woollen Bomber Jacket Winter, Braces Tie Black BeretDavid Klein Pty Ltd 1967costume, male uniform, military

Belonged to Colonel Otter.16 Military uniform round brass buttons.Various inscriptionsmilitary buttons

RAEME Corps was first established in 1942 when the Ordnance Corps and the Service Corps were combined. This uniform was donated by a RAEME member who served during the Vietnam War. The Corps began sending advisers to Vietnam in 1964 and this foreshadowed a massive build- up of RAEME personnel and equipment which peaked in 1971. The first direct RAEME support was provided in early 1965 as part of 1 Aust Logistic Support Coy (1 ALSC). Prior to 1971 the RAEME elements of 1 Australian Logistic Support Group built up to a stage where there were two field workshops. The withdrawal of all Australian forces was completed in 1972 and RAEME reverted to its peacetime role.This uniform was worn by a member of the Wodonga community who served with RAEME during the Vietnam War. RAEME Corps members are also represented at the Army Logistic Training Centre at Bandiana.Australian Military uniform - this uniform was issued during Australia's involvement in the Vietnam war. It was worn by a member of RAEME (The Royal Australian Engineers), Damien Hunt who is a resident of Wodonga.On shoulder badge: "ROYAL AUSTRALIAN ELECTRICAL / & MECHANICAL ENGINEERS"raeme, military uniforms, australian army

Black and white photograph of wedding couple. Bride has trailing bridal bouquet. Groom in military uniform, leather leggings, Sam Brown felt hat? Leather armchair on left. Pole on left. Inscriptions: 'Bourne & Shepherd, India'Bourne & Shepherd, Indiacottage, miners

photograph: 6 men seated, one standing at rear. Five men dressed in suits, two in military uniform. Appear to be standing inside hangar with plane engines, wing structures. Written on top above head of man standing ' Basil'aviation, military, men in hangar, basil watson collection

Associated with medal bar for dress uniform WW1. 1914-1918. Associated with dress uniform WW1. The ribbon bar is worn on the left hand side above the breast and the colours of the ribbons affixed determine the campaigns served and or other military awards with approval to wear. Circa WW1 1914-1918. Gold coloured metal and brass ribbon plate for military uniform (no ribbons affixed). The back of the plate has two round lugs and an attachment slide through pin. The front top of the metal bar has a feather leaf type pattern affixed on top of where the ribbon mount would sit. Nilribbon bar ww1, circa ww1 1914 - 1915, dress uniform ribbon bar ww1 (incomplete with no ribbons attached).

This is the army uniform of James Chester Kerr Trewin a lieutenant in 2/7th and 58/59th Battalions. He served in the Middle East, Syria and New Guinea. James Trewin was wounded in action.This item gives an insight into the human element of World War 11 ensuring that those who were part of the Orbost community and played a vital role during this time are remembered.A khaki coloured WW11 jacket (male) with a cap. There are medals on a strip. Three bronze stars : 1939-1945 Star; Africa Star; Pacific Star. Round silver medals : 1939-1945 Defence Medal ; 1939-1945 Australian Service Medal . There is a Rising Sun - Australian Commonwealth Military Force - on the lapel and on the cap. On left sleeve is a strip of black and red bars.uniform-military trewin-james ww11

Written by hand in blue ink on a small piece of paper - Ribbon is pure gold thread. The buttons and stars are rolled gold. They were all brought from Germany by Auntie Hilda - made in her cousin's factory who supplied these for the German Army, (1st World War).A set of 1st World War German Military Uniform badges (10 star pins) and buttons (5) with a shank on the back made of rolled gold and a piece of ribbon made of pure gold thread. 3 buttons are smaller than the other two and all have engraving and military insignia which is difficult to read on the front and the back of each. One star is bigger than the other 9 and all have 5 points and lines on each point. They have a pin on the back. The 5 buttons have an insignia on the front with a key and other markings. German writing is around the edges and back.war, military badges, world war 1, military buttons, military decorations, gold

Sepia image mounted on board: group of seven men, dressed in military-type uniform. Four standing, three seated. Men on either side front have sash across chest, man in middle holding a sword. Rifle brigade ? On bottom of image written in black pen ' H. Friswell, S. Walton, Theo (?) Shearer, - Barber, Corp. Keck, Lieu. Pendlebury, Serg Miller.person, group, military, sandhurst, bendigo, military, friswell, walton, shearer, barber, keck, pendlebury, miller.

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) 1A Service Dress Uniform 1A - Tunic (Jacket - Blue Grey). This uniform was in the period 1966 - 2001 as the primary uniform. Service Dress is approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The Tunic consists of a jacket has a lapel collar, with two external chest pockets and exposed pocket flaps, two side jacket pockets with external flaps and two internal jacket pockets positioned just below the external chest pockets. There is a crescent shaped cloth badge 'AUSTRALIA' sown at the side/top of each sleeve and Squadron Leader - rank stripes sown around each sleeve on the upper wrist area. The Tunic is closed with four gold buttons down the front. Each button is inserted through a small round hole sewn into the right side of the tunic front and held in place at the rear with a safety pin. There are four corresponding button holes sewn into the left front of the tunic to fasten the jacket in the normal closed position when worn. Maker: Australian Government Clothing Factory (A.G.C.F.) - Coburg Victoria The Tunic has two military decorations attached above the exterior left chest pocket. The decoration are: 1. Conspicuous Service Medal - Yellow and Green right sloping diagonal strips 2.. Defence Service Medal (with one clasp) - Blue and Gold upright stripes and round metal clasp positioned centrally. The DSM is awarded for 15 years service and a clasp is awarded for each additional 5 years service.

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) 1A Service Dress Uniform 1A - Tie (Blue blue). This uniform tie was worn in the period 1966 - 2001 as the primary uniform. Service Dress was approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The tie was dark blue of medium width and has a tetron lining inside the wide end and no lining at the narrow end. Maker: Austal

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Working Dress (Jacket - Blue Grey). This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The short waist length jacket consists of a jacket has a lapel collar and zip front, with two external chest pockets and exposed pocket flaps, There are portlets on each shoulder that are fastened with a black plastic button. This button has a crown over eagle in flight on the front. Rank slides are slid onto these portlets and this jacket has Squadron Leader rank slides on the portlets. is closed with four gold buttons down the front. Each button is inserted through a small round hole sewn into the right side of the tunic front and held in place at the rear with a safety pin. There are four corresponding button holes sewn into the left front of the tunic to fasten the jacket in the normal closed position when worn. The waist belt is part knitted on the sides and cloth on the front and rear. There is also one interior pocket on the right side below the exterior breast pocket. Maker: Australian Defence Industries The Tunic has two military decorations attached above the exterior left chest pocket. The decoration are: 1. Conspicuous Service Medal - Yellow and Green right sloping diagonal strips 2.. Defence Service Medal (with one clasp) - Blue and Gold upright stripes and round metal clasp positioned centrally. The DSM is awarded for 15 years service and a clasp is awarded for each additional 5 years service.

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) trousers- Blue Grey. This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The trousers have a belted waist and zip front, with two slant side pockets, money fob pocket below the waist on right side and two rear slit pockets. The trouser leg is pleated at the waist belt in the front. Maker: Australian Defence Industries

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) 1A Service Dress Uniform - Tie (Blue blue). This uniform tie was worn in the period 1966 - 2001 as the primary uniform. Service Dress was approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The tie was dark blue of medium width and has a tetron lining inside the wide end and no lining at the narrow end. Maker: unknown

This item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Service Dress Uniform - Shirt (Blue blue). This uniform tie was worn in the period 1966 - 2001 as the primary uniform. Service Dress was approved for wear as either ceremonial dress or working dress when employed in office or business type environments. The tie was dark blue of medium width and has a tetron lining inside the wide end and no lining at the narrow end. Maker: Australian Defence Industies

Issued to Aircraftsman Bernard Farley in 1976 as part of his initial issue of uniform on joining the Permanent Air ForceThis item of military uniform was worn by Squadron Leader (SQNLDR) Bernard Farley during his period of Full Time service in the Royal Australian Air Force (RAAF) between 27 January 1976 and 02 March 1997. Bernard joined the RAAF as an Airmen was trained and employed as a Clerk Supply (CLKSPL) between 1996 - 1977. He undertook officer cadet training at the Army Officer Cadet School in 1978 and was commissioned into the Ground Defence Category on the 09 December 1978, where he served for 18 years and rose to the rank of SQNLDR. Royal Australian Air Force (RAAF) Peaked Hat - Blue Grey. This uniform was in the period 1966 - 2001 as the primary daily uniform in the office environment. Polyester working dress is approved for wear employed in office or business type environments. The trousers have a belted waist and zip front, with two slant side pockets, money fob pocket below the waist on right side and two rear slit pockets. The trouser leg is pleated at the waist belt in the front. Maker: Australian Government Clothing Factory

As an historic army uniform with an association to Victoria this item is of local historic and social significance. It is also in very good condition. Woolen khaki peaked hat has a central head band with solid peak connected to the lower front of the head band. The top is high at the front and protrudes out from the headband about 3cm on all sides. There is a brown leather chinstrap on the lower front of the headband above the peak and this has a slide extension that can be enlarged to go under the neck to keep the hat in position in high winds. The chin strap in connected to the headband with two plastic button that have queens crown above a map of Australia. Affixed to the front of the headband above the peak is the Artillery Corps metal hat badge in gold colouring. The interior of the top of the hat has a cotton lining under the woollen exterior and then a plastic protective lining to avoid sweat bleeding onto the exterior. A cloth badge with the makers name sewn to the cloth lining and covered by the plastic protective layer. uniform

WW1 History of Victor has been researched by Gary WithersSepia colour Photograph. Soldier In Army Uniform taken in a photographers studiouniform, ww1

People - "Harris, James" Buildings - Fence Associated with - Ww2

Part of the small collection of uniforms in DAHC's possession. Like most of these uniform this one stems from the 1950-ies. The shoulder insigne indicate a "Genie" division (Engineering Corps).Many of the 1950's period uniforms came from people that had been discharched after having served in the Dutch East Indies (now Indonesia) during the Indonesian War of Independence.Dutch military field uniform made from heavy greenish material: (1) short jacket and (2) pantsShort jacket (brass, insect eye - like button on each collar, St Joris (St George) patch on shoulder straps, "Prins Alexander" on sleeves, Dutch army emblem with "Je Maintiendrai", the Dutch national motto, on left sleeve), marks inside jacket W MvO 1954, Motecht door MITN.uniform army

Felt uniform patch relating to the United States Naval Academy and depicting a male tennis player and Navy insignie. Materials: Felt, Ink, Cardboard, Wood, Metal, Glasstennis

Donated by Brigadier D.O. Magee. Great grandson of John and Mary Burgi.Australian Army military jacket with insignia and decorations. Khaki in colour with three ribbon bars. Has epaulettes, red collar, gold buttons, belt with brass buckle, and matching khaki shirt and knitted tie.CGCF 1969 Victoria on collar of jacket.military uniforms

Black and White Photocopy of a portrait photo of James Madden in military dress, taken by S.T. King, in Williamson St Sandhurst. Uniform description: red shirt with gold buttons and braid, red hat on shelf, dark navy pants, white sash, belt and gloves, sabre and spurs. ? Local Regiment. No date.Photographer S.T. King Williamson St Sandhurst?military, s.t. king, photographer, james madden

It appears that items .1 , .4 and .5 are insignia worn by members of the Royal Australian Air Force. It also appears that items .2 and .3 were gifts by members of the force for a friend or loved one. The origin of the two star shaped items is unknown. The Royal Australian Air Force was formed in 1921, being evolved from the Australian Flying Corps., the aviation section of the Australian Army in World War One. These items are examples of military insignia pertaining to the Royal Australian Air Force and are retained for display purposes..1 Propeller khaki cloth badge with red and black embroidered symbol of a propeller .2 An oval badge featuring a gold and red eagle with wings outstretched and a gold and red crown above embedded in a black transparent material. A safety clip is attached by two chains to the badge .3 A metal oval with a bronze stylised propeller attached through two holes in the metal base to a silver coloured safety pin at the back. .4 and .5 Bronze five pointed star shaped three dimensional badge. The centre of the star has a rosette. One has a single brass clip on the reverse. The other has two clips. Otherwise they are identical. Nilmilitary insignia