A spring cart is a two-wheeled, one-horse cart, often with the driver standing up to drive it, and otherwise seated on a simple seat. Carts like this one had springs to make the ride smoother. It is a lighter version of a farm dray and is sometimes called a spring dray. Spring carts were often used on farms for carrying loads. In the towns, some businesses used a spring cart for deliveries of bread, milk and other goods. The carts would be used for travel and for families going on outings and picnics. Visitors to Flagstaff Hill Maritime Village from 1986 to 1992 would enjoy watching a Clydesdale horse named Duke as he worked around the village with his driver Pat McGowan. He would be hitched to a wagon or to this lightweight spring cart or sometimes he would pull the wagon with the cart attached as a trailer. The cart was used for maintenance, carting loads of timber or stone around the site or from town to Flagstaff Hill. Sometimes Duke and the cart would take visitors for cart rides around the Village. Pat McGowan was known for his restoration of horse-drawn vehicles including this spring cart. He already had 40 years of horse handling experience when he began looking after Duke, feeding and harnessing him and driving the horse and cart around the Village. Pat’s dog ‘Yabbie’ would often join them. In August 1992 Duke had to be put down. Warrnambool Veterinary Clinic and other fund-raisers began well-supported appeals and the beloved horse was replaced by a Clydesdale also named Duke (the second), who began work in late October 1992. He, like his predecessor, had a quiet temperament and was comfortable in the traffic. The spring card is an example of vehicles used on farms, for business delivery and for domestic transport in the late-19th and early-20th century. This cart is of note for being associated with the Clydesdale horse Duke which pulled the cart around Flagstaff Hills in the 1980s and 1990s, representing transport of that period.Spring cart; two-wheeled cart with shallow box tray and plank seat bolted across the front. Wheels have metal rims and fourteen (14) wooden spokes. A plank is bolted from side to side. A decorative metal step is on the cart's left and has acorn cut-out shapes in the plate. Both wheels have a brake block that is operated by a lever on the cart's right. The cart has eight-leaf suspension from front to back. The box tray is painted blue and has decorative pale yellow detail. Each shaft pole has has a handle fitting on it. (Horse equipment with the cart is a leather covered, straw filled collar.) flagstaff hill, flagstaff hill maritime museum and village, warrnambool, maritime museum, maritime village, great ocean road, shipwreck coast, springcart, spring cart, jingle, horse-drawn cart, one horse cart, two-wheeled cart, dray, spring dray, wagon, transportation, travel, cart, duke, clydesdale, pat mcgowan, delivery cart, yabbie, cartwright, horse-drawn vehicle, transport, horse cart

The Brodribb River is an tributary of the Snowy River, and runs into the Snowy River near Marlo in East Gippsland. Both of these rivers have floods which spill over their banks onto a large floodplain. Floods are always significant events. These photos show the impact on transport during a flood event. These photos are significant because they show the effect of a flood on everyday lives, in this case, on transport. Three b/w photographs with a sepia hue, of the Brodribb River in flood. 2724.1 This photo shows a horse and cart with a man standing up in the cart, seemingly pulling a car through water. In the front left is a wooden fence. 2724.2 Two men standing up in a cart behind a horse, pulling a truck through water. 2724.3 A one-horse cart with two men standing, entering water. A wooden fence is to the left of the photo, and a wooden construction lying on the the ground. Written on front of all 3 photos, in black ink: 'Brodribb in flood'. On the back: A Coulsonbrodribb river, floods

Sepia photograph: Diggings Myers Creek. Slab huts on left side. Man standing in front of hut, barrels and timber outside hut. Carriage with two horses, on right buck board and one horse, horse and cart on left. Discovery of gold at Myers Creek 1867, vic. Australia. Letter from Kerry Carroll included.Batchelderplace, land, mining, kerry carroll (for dolly carroll), 9 brooke street, eaglemont vic 3084

Photograph of Charing Cross Bendigo from the Family Hotel with an electric tram (possibly No. 13), motor cars and one horse drawn cart. In the view are the Post Office, the Beehive building, and signs for Plume petrol, City Club hotel, and Wanda Inn. Photo from the Collection of the National Library Canberra. The Bendigo Historical Society has dated the image as 1958.Yields information about Charing Cross Bendigo in 1958.Printed black and white illustration.trams, tramways, bendigo, charing cross

Photograph, looks north east along High St Kew, from Kew Junction. Has a horse tram climbing the hill. There are signs for Canary tobacco, F O Stowe Fruiter Confectioner, Alice cycle works, a tobacconist Geo Neubecker, advertising Perfection, Havelock and Two Seas tobacco, and Farland Timms & Co Produce Merchants. One horse drawn cart is parked outside the Produce shop.Yields information about Kew Junction c1900.Black and white photograph with notes on the rear.Has on the rear in pencil "Kew Junction" and number "186"tramways, horse trams, kew junction, high st kew

Rose Series postcard P.1060, titled "Flinders St Railway station Melbourne," shows a W2 with white war time paint on the bumper bar crossing Swanston Street (Route 28?) with many cars and one horse-drawn cart in the view. On the est bound safety zone stop are several men in military uniforms. Note the eastbound safety zone stop on the east side of Swanston Street. Yields information about the intersection of Flinders and Swanston Sts.Postcard - printed real photograph with Rose Stereograph Co. name on the rear.Has been used as a part letter to Ken Magor.trams, tramways, w2 class, flinders st station, flinders st, swanston st, safety zones, world war ii, princes bridge station, rose series

Unmade road through bush and trees. One white horse and one black horse pulling cart loaded with hay. Two hatted men seated on top of hay. A rider on horseback with stock in background. Very rural scene.Carting hay on Nobbies RoadThe Nobbies Roadlocal history, photographs, the nobbies road, sepia photograph, betty kus collection, rural scene, phillip island, bruce bennett

Rose Series postcard No. 3239, "Flinders Street Railway Station, Melbourne" with W class tram 223, westbound in Flinders St. with another W class tram on the other side of the intersection. A Y1 class tram is in Swanston St with its doors open. There is one horse drawn cart in Swanston St. A traffic policeman is on duty, though the intersection has been fitted with traffic lights. See reference for a note on traffic lights in Melbourne.Yields information about the Flinders St Station building and the intersection of Swanston and Flinders Sts.Postcard - printed real photograph with Rose Stereograph Co. name on the rear.tramways, traffic, flinders st, flinders st station, swanston st, tram 223, y1 class, w class, trams, rose series

Rose Series postcard P.3541, titled "Elizabeth Street Melbourne", taken from The Argus Building tower on the corner of Elizabeth and La Trobe Streets looking south to Flinders Street, There are eight trams in the view and one horse drawn cart in Lonsdale Street near the corner. St. Francis' Church is in the middle of the photograph with the Myer Emporium Londale Street store in the left of the photo. The white building in the right of the photo is the new Mitchell House built in 1936. Yields information Elizabeth Street late 1930s.Postcard - printed real photograph with Rose Stereograph Co. name on the rear. Two copies held.tramways, trams, w5 class, elizabeth st, lonsdale st, rose series

Rose Series postcard P.1083, titled "Bourke Street Melbourne", showing a busy scene outside Buckley & Nunn Limited store and the Myer Emporium. In the view are two double-decker buses, two single-decker buses in the wartime livery with white mudguards and white rear panels. one horse-drawn cart is on the opposite of the road. There is a gas producer pack on the back of the car parked on the left-hand side of the photograph. Also in the view are signs for London Stores.Yields information about Bourke St early 1940s.Postcard - printed real photograph with Rose Stereograph Co. name on the rear.tramways, bourke st, buses, world war ii, td5c class, ts8c class, mmtb buses, rose series

Photo of St Kilda Road, from the junction looking north with tram 123 standing opposite the signal box. The tram is sign written for "St Kilda to Queensberry St. The signal box has signs advising that "All traffic keep to the left of this box". A uniformed employee is standing between the box and the tramcar. There are several motor cars in view, along with one horse-drawn cart. Second copy - actual postcard - "Rose Series P.3387 St Kilda Road, from The Junction, St Kilda Vic"Yields information about St Kilda Junction, and cable tram operations.Black and White Photograph postcard format, divided back with note on rear. Two copies held.In pencil on the rear "St Kilda Rd from the junction"tramways, trams, cable tram, st kilda, st kilda road, st kilda junction, signal box, tram 123, rose series

Rose Series postcard P.1701, titled "Elizabeth Street from Lonsdale Street Melbourne". Has a number of cable trams in the view, the closest one being a Brunswick tram. There is a policeman on point duty. In the view are signs for G A Grano Mantle manufacturers, Smiths Pawnbroker, State Savings Bank, Michael's Camera store, one horse-drawn cart, and motor vehicles. On the west side footpath under an awning is a "Keep to the left" for pedestrians. Flinders St Railway Station can be seen in the far distance. The Brunswick cable tram line was closed Sept. 1935.Yields information about Elizabeth St, c1930Postcard - printed real photograph with Rose Stereograph Co. name on the rear.On rear in pencil "KM-M-076" and a Ken Magor stamp.trams, tramways, flinders st station, cable trams, elizabeth st, rose series

Original O'Beirne family home on Skipton Road, Linton, adjacent to office of their wool and skin business.Black and white copy of original photograph showing a weatherboard house with verandah and lattice work, next to a smaller building (office) which has two windows, a door and no verandah. One pine tree behind the buildings and one to the right of photograph. A light coloured picket fence in front of the buildings with a gate half way along. Six men, two children, a dog and two horses (one with cart) in front of the buildings.o'beirne residence, house, home, building, office, shed, business, children, horse cart, dog (buller), francis o'beirne, francis john (frank), harry o'beirne, rod o'connor (bookkeeper), charlie todd, jack cox, roger o'beirne, frank hall butcher from piggoreet, wool and skin business

Copies (2) of original photo: Print attached to back of photo : Mr. Fred Kelly ( in uniform ) with his complete working model of a mine which took part in the Easter Procession for many years. Mr. Kelly built the mine himself, and included a small steam engine to drive the stampers and make the cage go up and down. The mine was formerly on show upstairs in the Town Hall, and is now at the Deborah mine museum. Written on bottom of photo in black biro : Valda Pinder 54435593 Photo shows 6 seated men, one standing and one driving horse driven cart with mine model on cart. Two white horses drawing cart. Streetscape in background.bendigo, mining, kelly mine model

This stock horse bridle was probably used in the mid 1900's. This was the period when cattle and sheep mustering was at its prime. The movement of cattle and sheep was by mounted stock horse only and not by other methods. Northern territory cattle stations in the late 1900's started to use helicopters for "cattle control". In the KIEWA Valley/Bogong High Plains and other rural cattle/sheep producing areas required well trained stock horses and stockmen for cattle/sheep control. It is only in the later 1900's that motor bikes and four wheeled quad-bikes have taken over, in part, from the mounted stockman.This horse bridle is very significant to the Kiewa Valley because of the early introduction of cattle and sheep stations in what initially was regarded as a semi remote valley location. The maintenance of cattle and sheep in the Kiewa Valley was, and still is an important requirement of livestock management. A good stock horse bridle is important, especially during the period when cattle and sheep were grazed on the Bogong High Plains. The mustering and and moving cattle/sheep from the valley pastures to the high country was a demanding and dangerous exercise requiring "sure footed" stock horses.The "good specialised" bridle was a vital part of this cattle/sheep mustering. A scientific study started in 1947 to study the impact of grazing cattle/sheep on the natural Alpine and sub Alpine vegetation found grazing cattle had an adverse affect on the natural Alpine and sub alpine vegetation, and grazing on the plains was stopped by the Victorian Government in 2005.This "camp draft" on the Bogong High Plains could take up to six weeks.This harness bridle includes "blinders, winklers or blinkers" and would therefore be used on a pack or "working" horse. This bridle has rings on each end of the browband. The bridle is one used by a horse working in a team configuration pulling a heavy cart or wagon. The bridle has ten adjustable straps to allow it to accommodate a variety of horse sizes. See KVHS 0495 for a stock horse saddle.horse, country, leather bridle, gaiters, high country grazing, cattlemen, laces, studs

The Tawonga Store was a general store in the Upper Kiewa Valley providing for the farming community. This store had a variety of items and was the main store for many of the farming families who would travel in on horse and cart to make weekly trips to the store for supplies.George Potter owned the store before 1920. Whit Potter, George's son worked with his father for many years. See KVHS 0621 for early Ledgers, which give a comprehensive list of what type of items the residents of the Kiewa Valley purchased during this period.Rectangular sepia photo of Tawonga Store with Geo. Potter printed on its roof. Horse and cart and one early model car and one truck are parked out the front. The truck has a driver and passenger.tawonga store, george and whit potter

This framed portrait is of a family group picnicking and is titled Emerald School Picnic, Mordialloc, Victoria which was taken in 1930. The group are mainly family members of the Hirst Family, as described on the reverse of the photograph.An oval timber framed black and white sepia toned photograph of Emerald Primary School Picnic held at Mordialloc, Victoria in approximately 1930. The photo is a landscape orientation photograph and is mounted with an oval, white mat board in a mahogany timber style hanging frame. At some point the photo has been touched up with a painted tree in the left-hand side foreground of the picture, partially covering the identity of one of the group of picnickers. More information about the people in the group has been detailed on the back of the photo frame. The photo frame chops into part of the photo which is also slightly less sharp and blurry compared to the original one printed on cabinet card.On back of photograph: "Alice Richardson first grandchild for Granny & Grandad Hirst. A School Picnic held at Mordialloc - Victoria. approx - year of 1930 They are listed from left to right from back row; Tom Legett and Joe Hirst. Second row consists of Maud Nobelius (now Hirst), Jack Hirst, Kath Hirst (now Fitton). Third row consists of Kath Hirst (now Fitton), Charlie Leggett, Granny Hirst (Alice) (hat on), Harry Leggett, Dolly Richardson (Alice) (now Hirst), Grandad Hirst, nursing Alice Richardson (now Newcombe). Front row is a set of legs (unknown) and Lana Hirst (now Tardrew). At Emerald Primary School Picnic held at Mordialloc approx 1930 Harry Leggett father of Tom & Charlie Leggett also father of Bonnie Butterworth (Leggett) Not in photo. Another daughter Dorothy Leggett died (aged 13years) after an accident falling from a milk cart when the horse bolted at Emerald. Drinking fountain in Emerald School a memorial to her."hirst family, 1930, photograph, mordialloc, emerald primary school

This glass milk bottle was manufactured and used mid 1800's (1834 Victorian dairy industry was founded) to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the large volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36"This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against sunlight penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it 6/33 and next to this "ONE PINT" and under this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "4"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) up to the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under house at 1 Beauty Ave., Mt Beauty.This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head was manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle which contained milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/18" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "3"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded) until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under house at 1 Beauty Ave., Mt Beauty.This heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottle along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/36" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "15" glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late1900's (1834 Victorian dairy industry was founded) up until the time that a cheaper container was invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle to contain milk required its thickness because of the extensive handling before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle a circle within it "6/18" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "4"glass bottles, commercial milk containers, domestic milk bottles, pasteurized milk bottles

This glass milk bottle was manufactured and used mid to late 1900's (1834 Victorian dairy industry was founded), until the time that cheaper containers were invented(plastic bottles and polyethylene plastic lined cardboard cartons). In 1909 the supply of pure bottled milk was required for babies to overcome infant mortality due to unhygienic milk sources (unclean containers and unpasteurized milk). Due to the volume of milk being processed and hand milking could not keep up with demand, dairy farms introduced milking machines in the late 1930's. The great increases in dairy herds from the average of 18 cows per heard in 1950's to 142 cows per herd in 1996 required milk tankers to pick up the regions milk supply. This bottle was so constructed to be easily moved within the milk processing plants from the delivery vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1958 the milk bottle slowly became phased out of production. At this point in time Melbourne was drawing 160,000 bottles per week from the two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co.Victoria was the major state supplier of cows milk in the history of Australian milk production from the early 1800's. The Kiewa Valley and its region was a major contributor to meet that demand. Each bottle was "branded" during manufacturing to show the contents (pasteurized milk) and where it originated from (region and supplier). This method of recycling the bottles back to specific dairy farms was a good control method but an uneconomical "on cost" which was replaced by the "throw away" less costly plastic and cardboard containers. Kiewa Valley dairy herds had marked bottles bearing "90/9", "6/18", "6/33", "6/35" and "6/36" Found under the house at 1 Beauty Ave., Mt BeautyThis heavy gauged glass milk bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the milk production line. The method of pouring milk into the bottle has been part of the "production line". This bottle has a one pint capacity and is made from "light green" coloured glass(a protection against light penetration). There are other milk bottles that do not have a "green" tint in them. This thick glass bottle, to contain milk, required its thickness because of the extensive handling (man and machine) before final consumption. Milk was delivered by the "milk man" direct to the homes of consumers. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck.On the bottom end of this bottle is a circle within it "6/35" and next to this "MILK" and opposite "ONE PINT". Below this "THIS BOTTLE BELONGS TO MILK BOTTLE RECOVERY LTD" and below this "AND CANNOT BE USED WITHOUT WRITTEN PERMISSION" on the base "M" underneath this "20"milk, dairy, glass bottle

This glass ginger beer bottle was manufactured and used early to late 1900's, until the time that cheaper containers were invented(plastic bottles). This bottle was so constructed to be easily moved within the ginger beer processing plants from the brewing vats/holding tanks to the final corking/sealing of the bottles for eventual distribution. From 1990s the bottle slowly became phased out of production however boutique suppliers still preferred thick glass to contain any explosive action. Two major glass bottle works companies, e.g. Melbourne Glass Bottle Works Co. were the main suppliers for the Victorian State. In the period when this bottle was manufactured and used the major ginger beer brewing plants for the whole of Victoria were located in Melbourne because this was where its greatest consumer base was there and most rural areas were supplied by domestic sources (mother brewing ginger beer for the children). The Kiewa Valley and its region was one rural area which until road invrastructure was enhance covered the ginger beer thirst by local family production. As the population expanded considerably in the late 1940's (SECV Hydro Scheme) with a greater demand for "soft" drinks" being established supplies from larger towns and cities were call for. Each bottle was "branded" during manufacturing to show the contents were from a reputable supplier (H Taylor) and where it originated from. These bottles were recyled by the manufacturer as a way to cut production costs. This method of recycling the bottles back to the specific manufacturer has (except for South Australia)been overtaken by a no cost recycling collection by councils (funded by their communities). This method by passes the user cost principle as the bottles are processed as non generic. The uneconomical "on cost" which was replaced by the "throw away" less costly plastic containers however did not provide the keen domestic brewer of the "beer" with a reusable bottle. This heavy gauged glass ginger beer bottle has a rim and a distinctive head at the top. This head has been manufactured to facilitate the movement of the bottled along the filling production line. The method of pouring ginger beer into the bottle has been part of the "production line". This bottle has a one and a half pint capacity and is made from "light green" coloured glass(a protection against light penetration). This thick glass bottle, to contain ginger beer, required its thickness because of the extensive handling (man and machine) before final consumption. During this period delivery to homes in cities and towns was made initially by horse and cart and later by truck. Ginger beer was a "soft drink" of great demand. On the middle portion of this bottle is a large elongated circle within it and following the spherical line is "H. TAYLOR" ans a star separates this from "MELBOURNE" rounding out the bottom curviture. Within these words are the large initials "T H" . The "T" superimposed onto the "H". On the base and covering the whole bottom is the letter "T". At the opposite side to the manufacturers logo is "THIS BOTTLE CANNOT BE SOLD OR USED BY ANY OTHER PERSON & IS NOT COMPLETE WITHOUT STOPPER" glass bottle, non alcoholic drink, taylor ginger beer bottle, reuseable bottles

This box which once contained linen thread manufactured in Scotland and labelled "British" manufacture" was used for the repair/manufacture of clothing by professional seamstresses and those wives required to "do" repair stitching of family clothes. This box was manufactured in a period when the title "United Kingdom" was used (late 1700's early 1900's) to describe the union of Britain and Scotland. The label however can be misleading as the"British Manufacture" thread was manufactured in Scotland. The broad term "British Manufacture" was used for the benefit of those in the "colonies" of Australia and New Zealand, during a period when the "coined" phrase "best of British, or British best" was synonymous to "top quality". After World War II the need for "cheaper products" was more persuasive than the quality of the product. In rural areas this shift to cheaper "non British" goods was at a slower rate than in the cities. Goods such as clothing manufactured or altered by seamstresses were regarded as of a higher standard and therefor the use of linen thread from "Britain" was a sign of quality and reliability.This box which contained linen thread, "British" made, is very significant to the Kiewa Valley because it demonstrates the conditions under which households in the late 1800's and early 1900's evolved from a "domestic repair /replacement" of damaged clothing to a consumer of recycled and shop bought clothing and linen. The ability of semi isolated rural based families to purchase "off the rack" clothing was severely affected by weather, long distance over dirt roads(poorly serviced) to large towns(shops), horse/cart or slower driven cars. The purchasing of clothing was, on the whole, from trading house "mail order" consignment orders.This red paper covered box has a white covered lid (top) with black print detailing the manufacturer and contents. This box contained 150 yds of linen thread 2 cord. A small added note pasted on one side "USUAL TWIST (s)" describing the thread's appearance. Two semicircular "finger" holes on two sides of the lid permit easier removal of the lid from the base.On the top lid: "W.&J. KNOX'S" below this a crest with latin motive "MOVEO ET PROFICIOR" English translation "I proceed and am more prosperous" encircling an open winged falcon. below this "LINEN THREAD", "2 CORD." "WARRANTED" "150 Yds." Made from Flax." British Manufacture". On one side "DRABS SOFT FINISH" within a shield "KNOX'S TWO CORD 150 YARDS 30" next to this a trade mark "W & J KNOX below this "made in KILBIRNIE, SCOTLAND"thread, cord. flax, box container, linen thread, seamstress items, cardboard box

This photograph depicts employees of C. A. Nobelius on a fruit growers employee picnic. It is disputed where this photograph was taken - while we have suggested it was in the Cockatoo Creek area (now simply Cockatoo), the State Library's catalogue entry for another copy of this photograph suggests it was likely the Dandenong Ranges based on the Sassafras-Olinda label on one of the carts. Another post specifically labels it as the corner of Mount Dandenong Tourist Road and Monbulk Road, though I don't believe we have enough information to affirm this. This image recalls the workplace recreational events of the area in the early 20th century, and has direct relevance to the Nobelius Nursery.A black and white copy of a photograph of several horse-drawn carts on a road, filled with at least thirty people - men and women - dressed in the styles of the early 20th century. There are trees and buildings in the background, and some of the picnickers are posing for the photograph.Top-left of photograph: "1909"cockatoo, 1900s, nobelius nursery

These were used on a horse-drawn wagons, carriages, stagecoaches, and carts. A wheelwright would use this tool to make or repair the wheels. All sizes of buggy spanners, or wagon wrenches, were needed as wagon wheels were of many different sizes. Horse-drawn wagons are an important part of Australia’s agricultural history. Light buggies were popular with farmers for trips into town before the common use of motorised vehicles.A collection of thirteen iron wheel spanners on an iron hook. One spanner has a wooden handle and is an adjustable spanner.tool wagon-wrench-spanner transport

Walter John Howell was born in the Buckland Valley 30.11.1871 he died in Bright 13.05.1930. Walter "Watty" ran his Blacksmith shop opposite the Alpine Hotel (corner of Anderson and Wood sts) from 1893 until his death in 1930. He was also proprietor of the Ovens Valley Coach Factory in Ireland Street, near the site of the present library, for a numberof years before World War 1. From 1893 he resided in Cobden Street (no.37) The medals were for attaching to a watch chain and were presented by his grandsons, Keith Edwards and Ron Howell (both born in Bright) in November 1994 The Medals were presented by the Bright Fire Brigade which has been a local volunteer organisation scince the C1870s The Howell family were one of the first families to settle in the Buckland Valley and many descendants live in the local area Reference to the Ovens Valley Coach WorksQuarto size ridgid card with information regarding the medal hand written in black ink. Two silver medals with inscriptions, one shield shape and the other round with a star in the center, sash and small horse shoe on the top, medals are stitched to the cardboad and taped on the reverse side.Two medals, both silver, one is shield shaped with a fire reel cart inscribed on the front and inscription "B.F.B. ANNIVERSARY 11-5-94 four men won by W. Howell" and number 65. The second one in round with with a star in the center, with a small horse shoe and sash on the top, inscribed on the front, "B.F.B. Anniversary best of eight men W. Howell 11-5-94", the reverse is blank except for a small 69.