This item is from the ‘Pattison Collection’, a collection of books and records that was originally owned by the Warrnambool Mechanics’ Institute, which was founded in Warrnambool in 1853. By 1886 the Warrnambool Mechanics’ Institute (WMI) had grown to have a Library, Museum and Fine Arts Gallery, with a collection of “… choice productions of art, and valuable specimens in almost every branch and many wonderful national curiosities are now to be seen there, including historic relics of the town and district.” It later included a School of Design. Although it was very well patronised, the lack of financial support led the WMI in 1911 to ask the City Council to take it over. In 1935 Ralph Pattison was appointed as City Librarian to establish and organise the Warrnambool Library as it was then called. When the WMI building was pulled down in 1963 a new civic building was erected on the site and the new Warrnambool Library, on behalf of the City Council, took over all the holdings of the WMI. At this time some of the items were separated and identified as the ‘Pattison Collection’, named after Ralph Pattison. Eventually the components of the WMI were distributed from the Warrnambool Library to various places, including the Art Gallery, Historical Society and Flagstaff Hill. Later some were even distributed to other regional branches of Corangamite Regional Library and passed to and fro. It is difficult now to trace just where all of the items have ended up. The books at Flagstaff Hill Maritime Village generally display stamps and markings from Pattison as well as a variety of other institutions including the Mechanics’ Institute itself. RALPH ERIC PATTISON Ralph Eric Pattison was born in Rockhampton, Queensland, in 1891. He married Maude Swan from Warrnambool in 1920 and they set up home in Warrnambool. In 1935 Pattison accepted a position as City Librarian for the Warrnambool City Council. His huge challenge was to make a functional library within two rooms of the Mechanics’ Institute. He tirelessly cleaned, cleared and sorted a disarrayed collection of old books, jars of preserved specimens and other items reserved for exhibition in the city’s museum. He developed and updated the library with a wide variety of books for all tastes, including reference books for students; a difficult task to fulfil during the years following the Depression. He converted all of the lower area of the building into a library, reference room and reading room for members and the public. The books were sorted and stored using a cataloguing and card index system that he had developed himself. He also prepared the upper floor of the building and established the Art Gallery and later the Museum, a place to exhibit the many old relics that had been stored for years for this purpose. One of the treasures he found was a beautiful ancient clock, which he repaired, restored and enjoyed using in his office during the years of his service there. Ralph Pattison was described as “a meticulous gentleman whose punctuality, floorless courtesy and distinctive neat dress were hallmarks of his character, and ‘his’ clock controlled his daily routine, and his opening and closing of the library’s large heavy doors to the minute.” Pattison took leave during 1942 to 1942 to serve in the Royal Australian Navy, Volunteer Reserve as Lieutenant. A few years later he converted one of the Museum’s rooms into a Children’s Library, stocking it with suitable books for the younger generation. This was an instant success. In the 1950’s he had the honour of being appointed to the Victorian Library Board and received more inspiration from the monthly conferences in Melbourne. He was sadly retired in 1959 after over 23 years of service, due to the fact that he had gone over the working age of council officers. However he continued to take a very keen interest in the continual development of the Library until his death in 1969. The Pattison Collection, along with other items at Flagstaff Hill Maritime Village, was originally part of the Warrnambool Mechanics' Institute’s collection. The Warrnambool Mechanics’ Institute Collection is primarily significant in its totality, rather than for the individual objects it contains. Its contents are highly representative of the development of Mechanics' Institute libraries across Australia, particularly Victoria. A diversity of publications and themes has been amassed, and these provide clues to our understanding of the nature of and changes in the reading habits of Victorians from the 1850s to the middle of the 20th century. The collection also highlights the Warrnambool community’s commitment to the Mechanics’ Institute, reading, literacy and learning in the regions, and proves that access to knowledge was not impeded by distance. These items help to provide a more complete picture of our community’s ideals and aspirations. The Warrnambool Mechanics Institute book collection has historical and social significance for its strong association with the Mechanics Institute movement and the important role it played in the intellectual, cultural and social development of people throughout the latter part of the nineteenth century and the early twentieth century. The collection of books is a rare example of an early lending library and its significance is enhanced by the survival of an original collection of many volumes. The Warrnambool Mechanics' Institute’s publication collection is of both local and state significance. Precious Stones and Precious Metals Author: C W King Publisher: George Bell and Sons Date: 1883 Label on spine with typed text PAT 549 KIN Inside front cover has a sticker from Corangamite Regional Library Service warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, shipwrecked-artefact, book, pattison collection, warrnambool library, warrnambool mechanics’ institute, ralph eric pattison, warrnambool city librarian, mechanics’ institute library, victorian library board, warrnambool books and records, c w king, precious stones and precious metals

Three paper catalogues for an auction sale held on 6th May 1943 of Cyanide Plant, Buidings, Machinery and Equipment of Precious Metals Recovery N. L ' adjoining North Deborah Mine' . By Order of the Liquidator Mr. F. H. Tadgell. Sale conducted by permission of the Director of Machine Tools and Gauges under Regulation 59 of the National Security (General) Regulations. J. H. Curnow & Son were the auctioneers.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - precious metals recovery n. l, north deborah mine, mr f h tadgell, j h curnow & son, j l jamieson & co, director of machine tools and gauges, the cambridge press

Yellow catalogue with black printing for Curnow's Ninth Gold Nugget Precious Metals & Rare Coins Auction held in the George Lansell Auction Room, Cahill Chambers, View Point, Bendigo on 16th October 1982. On the front is a black sketch of Bendigo Historic Post Office. The inside contains a list of Nuggets with Lot No., Approx. Weight in Grams, Area of Find, Code, Why Buy Gold? And Note to Buyers. The left front has the Conditions of Sale and the centre front has Curnows name and a Reproduction of Curnows original Letterhead circa 1900. Sale includes nuggets from Victoria and Interstate.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - curnow's ninth gold nugget precious metals & rare coins auction, bolton bros pty ltd, j h curnow, j h curnow & son pty ltd, ian dyett, fred dyett

Yellow catalogue with black printing for Curnow's Eighth Gold Nugget Precious Metals & Rare Coins Auction held in the George Lansell Auction Room, Cahill Chambers, View Point, Bendigo on 27th February 1982. On the front is a black sketch of Bendigo's Historic Post Office. The inside contains a list of Nuggets with Lot No., Approx. Weight in Grams, Area of Find, Code, Stone from Brazil, some jewellery and List of Coins. The left front has the Conditions of Sale and the centre front has Curnows name and a Reproduction of Curnows original Letterhead circa 1900. Sale includes nuggets from Tarnagulla, Bendigo, Maryborough, Inglewood and Myrtleford.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - curnow's eighth gold nugget precious metals & rare coins auction, bolton bros pty ltd, j h curnow, j h curnow & son pty ltd, ian dyett, fred dyett

Yellow catalogue with black printing for Curnow's Seventh Gold Nugget Precious Metals & Rare Coins Auction held in the George Lansell Auction Room, Cahill Chambers, View Point, Bendigo on 7th November 1981. On the front is a black sketch of Bendigo's Historic Post Office. The inside contains a list of Nuggets with Lot No., Approx. Weight in Grams, Area of Find, Code, Why Buy Gold?, and List of Coins. Also note to buyers. The left front has the Conditions of Sale and the centre front has Curnows name and a Reproduction of Curnows original Letterhead circa 1900. Sale includes nuggets from Wedderburn, Tarnagulla, Rheola, Inglewood, Maryborough, Bendigo, Dunolly and Eaglehawk.business, auctioneers, j h curnow & son pty ltd, ian dyett collection - auction catalogue - curnow's seventh gold nugget precious metals & rare coins auction, bolton bros pty ltd, j h curnow, j h curnow & son pty ltd, ian dyett, fred dyett

The nested cup weights were designed to make the transport of weights, essential items in most commercial transactions, more convenient. This idea goes back to Roman times. In the nested cup form, a series of weights shaped into cups are set one into the other. Each cup fits precisely into the next, larger sized cup which each larger example weighing exactly twice that of the one previous. The Troy weight system was used for precious metals and gemstones.7 x Brass troy measures of various sizes. Fine groove lines near top edge and bottom 2 x Copper sliding weights - domed.1) 32 oz Troy around top .2) 16 oz Troy around top .3) VIII R around top. Maker's mark - lidded pot (coffee/tea?) with date 1826 .4) 8 oz around top .5) 6 oz Troy around top .6) 4 oz Troy .7) 2 oz Troy "WATERS" on top of sliders with "4" on under sidenested cups weights, troy weight, precious metals, gemstones, commercial transactions, sliding weights, domed weights

A pair of scales or dishes in which objects to be weighed and the weights / masses against which to weigh them are placed is an "Apparatus for weighing. The pan, or each of the pans, of a balance." Its parts include a fulcrum, a beam that balances on it, two pans at the ends of the beam to hold the materials to be weighed, and counter-balancing weights. Gottingen made fine precision scientific scales for use by assayers, jewellers, chemists, gold buyers rtc. A 2 pan analytical, scientific or pharmaceutical beam balance scale made in Gottingen Germany c 1880. These scales are encased in a mahogany framed glass cabinet and Graded 0 -9 9-0D.R.PATENT / GOTTINGER PRAZISIONSWAGENFABRIK G.m.b.H. / GOTTINGEN On upright V over GPW scales, balance, precision measures, gold, pharmacy, precious metals, jewellery, gottingen germany, sartorious f, moorabin, bentleigh, cheltenham, early settlers, gold miners, pioneers, market gardeners, ballarat, bendigo, imperial measure, troy weight

Troy weight is a system of units of mass used for weighing precious metals and gemstones. The items here have no known provenance or donor.These items have no local significance and are useful for display onlyThese are six troy weights – 4 ounces, 2 ounces, I ounce, ½ ounce, ¼ ounce, ¼ ounce. They are brass and circular in shape and have ridged edges so that they fit one on top of the other. They are all slightly discoloured. The smallest ¼ ounce weight is different in shape and has a small brass knob on top.‘4 oz troy, 2 oz troy, 1 oz troy, ½ oz troy, ¼ oz troy, ¼ troy’ Old cataloguing number etched on all of the weights – ‘1499’ troy weights, warrnambool

A person wanting to dig for Gold or any other precious metal were required to register a claim on the land to be mined, the claim had to be measured & pegged to be specific as to its size and shape.Certificate Miners Claim No 058gold, document, certificate, miners claim

A pennyweight was a unit of mass that was equal in weight to 20 grains, one twentieth of an ounce and one 240th of a Troy pound. The abbreviation for a pennyweight is ‘dwt’ (denarius weight). These measures and weights were typically used for weighing gold and other precious metals. Group of eleven weights and measures including seven rectangular pennyweights with clipped corners and marked 10 DWTS, 6 DWTS, 5 DWTS, 4 DWTS, 3 DWTS, 2 DWTS respectively, two gram weights; 5 grams and 4 grams with top right pressed corner and two cup troy weights marked 4oz TROY and ½.284.1 10 DWTS 284.2 6 DWTS 284.3 5 DWTS 284.4 4 DWTS 284.5 3 DWTS 284.6 2 DWTS 284.7 1 DWTS 284.8 5 GRAMS 284.9 4 GRAMS 284.10 4 oz TROY 284.11 ½ city of greater bendigo commerce, making a nation exhibition, city of greater bendigo mining

No information is available on the history of these six examples of pennyweights. A pennyweight was a unit of mass that was equal in weight to 20 grains, one twentieth of an ounce and one 240th of a Troy pound. The abbreviation for a pennyweight is ‘dwt’ (denarius weight). Pennyweights were and are used in the weighing of precious metals and are still used by dentists in the measurement of the metal used in dental crowns etc. These items are of antiquarian interest and will be useful for displays. These are six pennyweights of varying weights – 5 pennyweights, 4, 3, 0.4, 0.5 and 0.6. They appear to be made of brass and the 5, 4 and 3 pennyweights are rounded off rectangles in shape with eight sides. The three smaller weights are rectangular in shape with nipped-off edges. ‘5 dwts’, ‘4 dwts’, ‘3 dwts’ In black labelling, ‘1499.10, 1499.11, 1499.12’ (old cataloguing numbers) pennyweights, warrnambool, denarius weight

This book was specially compiled and prepared for the convenient use of mine officials, mining engineers, and students preparing themselves for certificates of competency as mine inspectors or mine foremen.Dark, hard covered book. Contents include arithmetic, weights and measures, Cylinders, Geometry, Mensuration, Surveying, strength and Weight of Materials, wire ropes, chains, Colliery management, precious metals, ventilation, hydrostatics, hydraulics, mine railways, Friction of mine cars, colliery machinery, steam raising, rules for engine drivers, faults, electricity, glossary of Mining terms.mining, coal, metal, colliery, definitions, brook, advertisements

Troy ounces are slightly heavier than avoirdupois ounces that we commonly use. 1 troy ounce equals roughly 1 1/8 ounces and is used for the weighing of precious metals and gems. It is believed that the troy ounce dates back to the 16th century to the town of Troyes in Frances. This was a major trading centre for Europe and a standardised for of weights was needed. One troy ounce equalled 480 grains of barley.Four circular Troy weights - three have raised outer edge/lip with weight details imprinted in the centre. Large weight has the number 2 embossed in the middle. Second has the number 1.0 in the middle third has the number 1/2 in the middle. Fourth weight is solid and has a smaller inner circle. All appear to be made out of brass All taper down to smaller base.gold mining, gold mining equipment, gold mining history

Troy ounces are slightly heavier than avoirdupois ounces that we commonly use. 1 troy ounce equals roughly 1 1/8 ounces and is used for the weighing of precious metals and gems. It is believed that the troy ounce dates back to the 16th century to the town of Troyes in Frances. This was a major trading centre for Europe and a standardised for of weights was needed. One troy ounce equalled 480 grains of barley.Two Sets of Troy weights all circular and tapering to the bottom plus two individual weights - 1oz. One Complete set of Troy weights round in shape and tapering to bottom with six inner weights imprinted with 6oz, 4oz, 2oz, 1oz and nothing on two inner smaller ones.2nd set is incomplete with three inner crucibles next size is missing and then smallest size 6oz 4oz 2oz 1oz . Two individual weights 1oz.gold mining, gold mining crucibles, gold mining equipment, gold smelting

Assay is a process of metallurgy and chemical analysis used to determine proportions of precious metals in ores and other metallurgy substances such as silver or gold. The process helps identify pollutants present within a sample and can indicate a high level of pollution in a mining site. Stoneware crucibles are used in the fire assay process due to their ability to withstand high temperatures. Fire assay is a three step process where by samples from the mine are ground in a find powder and then mixed with dry powder chemicals. This mixture is heated in a crucible to extreme temperatures (crucible fusion) until all of the powers fuse into a glass like slag. Once this reaction is complete, the contents are poured into a mold and cooled. In step three (known as cupellation) the mixture is separated in a fire assay cupel and once this is complete the cupel with reveal a small bead of precious metals. Established by George Guthrie in 1857 (about 5km north of its current site) and then again seven years later in 1864 after it initially closed, Bendigo Pottery remains one of the most influential and longest running potteries in Australia. Over the years the Pottery has contributed to the growth and development of the district through both its products including building products, table ware and decorative and commemorative war as well as artistically, being responsible for training and supporting many potters locally. It has partnered with the City on various tourism promotions and the Civic Collection holds a number of important items within its collection.Two stoneware vessels of differing dimensions (0287.1 & .2). Unglazed and porous, showing extensive signs of use. Stamped and marked on the outside. 0287.2 has a shaped pouring lip. Six smaller items, coins, buttons (0287.3,.4,.5,.6,.7,.8) were found with the crucibles but their relationship to the assay items is unknown.0287.1; Large crucible; Bendigo Pottery / E. 0287.2; Small crucible: Pottery / C Icity of greater bendigo commerce, city of greater bendigo mining, making a nation exhibition

This particular specimen was recovered from two hundred feet down in the Golden Mile in Kalgoorlie, Western Australia. The Golden Mile, named after the estimated sixty million ounces of gold worth around one hundred billion dollars, was the birthplace of the largest gold rush in Australia almost one hundred and thirty years ago when William Brookman and Samuel Pearce leased the Great Boulder mine. The Golden Mile is also the home of the Super Pit, Australia's most well-known mine.The majority of gold deposits will form as a native metal, however, on occasion, it can form a compound with another element, in this case, sulphur. Therefore, this specimen is a rare example of gold naturally forming into a compound mineral with sulphur. This specimen is part of a larger collection of geological and mineral specimens collected from around Australia (and some parts of the world) and donated to the Burke Museum between 1868-1880. A large percentage of these specimens were collected in Victoria as part of the Geological Survey of Victoria that begun in 1852 (in response to the Gold Rush) to study and map the geology of Victoria. Collecting geological specimens was an important part of mapping and understanding the scientific makeup of the earth. Many of these specimens were sent to research and collecting organisations across Australia, including the Burke Museum, to educate and encourage further study.A small gold-sulphide ore mineral specimen in shades of silver and grey with flecks of gold. Precious metals are often found in Sulphide Ores, as sulphides usually bind to these metals. They are also extremely symmetrical in crystaline form. Gold-Sulphide Ore occurs when gold forms a natural compound with other elements. In this form, gold can be present in one of two ways. It can be fully immersed in the sulphide, or a portion may be partially free. This specimen has minimal gold visible, with only a few flecks being partially visible.burke museum, beechworth, indigo shire, beechworth museum, geological, geological specimen, mineralogy, gold-sulphide ore

A tie pin is a neckwear controlling device, originally worn by wealthy English gentlemen to secure the folds of their cravats. They were first popularized at the beginning of the 19th century. Cravats were made of silk, satin, lace and lightly starched cambric, lawn and muslin, and stickpins were necessary accoutrements to keep these expensive fabrics in place and safe. Stickpins commonly used pearls, and other precious gemstones set in gold or other precious metals and were designed specifically for their owners. By the 1860s, wearing cravats had been embraced by the English upper middle classes with a consequently lower quality of materials and designs used in both the neckwear and in the stickpins used to keep it in place. By the 1870s Americans had embraced stickpins and designs were mass-produced. 3 men's metal lapel pins with coloured glass inserts 1 yellow 2 red jewellery, tie-pins, male neckwear, moorabbin, brighton, early settlers, pioneers, cheltenham

A tie pin is a neckwear-controlling device, originally worn by wealthy English gentlemen to secure the folds of their cravats. They were first popularized at the beginning of the 19th century. Cravats were made of silk, satin, lace and lightly starched cambric, lawn and muslin, and stickpins were necessary accoutrements to keep these expensive fabrics in place and safe. Stickpins commonly used pearls and other precious gemstones set in gold or other precious metals and were designed specifically for their owners. By the 1860s, wearing cravats had been embraced by the English upper middle classes with a consequently lower quality of materials and designs used in both the neckwear and in the stickpins used to keep it in place. By the 1870s Americans had embraced stickpins and designs were mass-producedThe family of Lorna Risstrom were early settlers in Moorabbin ShireA tie-stud and chain in a small, blue velvet covered, silk lined, hinged jewellery box with . The tie-stud has a red stone set in gold metalmoorabbin, bentleigh, cheltenham, early settlers, pioneers, market gardneners, jewellery, risstrom lorna, tie-pins, tie- studs, cravats, silk, lace,

A shirt stud is a decorative fastener that fits onto a buttonhole on the front of a pleated shirt, or onto the starched bib of a stiff-front shirt. Such shirts have special buttonholes solely for shirt studs. A shirt stud may be fashioned from alloys, precious metals, and gemstones—materials uncommon to buttons sewn on shirts. The stud may have an inlay, such as of pearl or onyx. Dress code of the modern western world reserves shirt studs for men's formal wear and some semi-formal occasions. In the western world, shirt studs were first used in the mid-19th century, when some shirt fronts were too stiff to close with buttons. So remains the case for the heavily starched, modern full dress shirts worn with white tie. A collection of men's shirt studs in black and white and in various styles,and sizesclothing, shirts, menswear, early settlers, pioneers, moorabbin, bentleigh, cheltenham, jewellery, dinner suits

Bendigo Advertiser "The way we were" from 1999. Malthouse: The Albion Brewery (Steward Brothers), Eaglehawk, circa 1900. The brewery dates back to 1853. James Steward was born in 1830 at Bury-St-Edmonds, Suffolk, England, and was educated in the brewing of ale before he boarded the American ship, the James L. Logert, bound for Australia in 1852. He made his way to the Bendigo diggings where he soon won his share of the precious metal until 1857 when he purchased a brewery in Letherby's Rd, Sailors Gully. The brewery covered five acres, had a house opposite with creeper covered walls and was described as one of the most attractive in the area.newspaper, bendigo advertiser, the way we were

Troy weight is a system of units of mass from an unknown origin. While the name Troi is believed to have come from Troyes in the north east of France the system used primarily in the precious metals industry and adopted in Australia originated in 15th century England. Troy weight units are the 'grain' and 'pennyweight' (24 grains), the troy ounce (20 pennyweights), and the troy pound (12 troy ounces). One troy ounce equals 31.1034768 grams. The troy ounce and grain were also part of the apothecaries' system and was long used in medicine, but has now been largely replaced by the metric system (milligrams). When the Weights and Measures Act was passed in Victoria in 1862 local inspectors were established throughout the colony to ensure accuracy particularly in the weighing of gold. By the 1870's each local council had a set of standards that were used to test the scales, weights and measures of local merchants and businesses. This set would have been de commissioned some time after 1947 and was offered back to the Borough of Eaglehawk in 1989. Hinged, lockable wooden box with brass handle, hinges, latches and lock. Remnant wax on front face of box above and below lock. Interior of box is lined with purple velvet which is worn in several places. Box houses nine troy weights ranging in size from 100oz Troy to 2oz Troy. 1oz Troy is missing. Accompanying set is a two page letter from Weights and Measures Branch of Consumer Affairs offering set back to the Borough of Eaglehawk in 1989. Troy Weights: Part a) 100oz Weight, 68 mm Diameter at base x 113 mm H b) 50 oz Weight, 53 mm D x 90 mm H c) 30 oz Weight, 45 mm D x 77 mm H d) 20 oz Weight, 39 mm D x 65 mm H e) 16 oz Weight, 37 mm D x 60 mm H f) 8 oz Weight, 30 mm D x 47 mm H g) 4 oz Weight, 24mm D x 36 mm H h) 2 oz Weight, 19mm D x 28 mm H i) 1oz missing Hinged Wooden Box: Part j)171 mm H x 300mm W x 196 mm D Typed two page letter: Part k) 295 mm H x 210 mm W x 1 mm Top Troy: Each Troy weight stamped with small symbol made up of the number 5, an image of a crown and the word STANDARD. Side Troy : Each Troy weight stamped with small symbol made up of the number 5, an image of a crown and the word STANDARD above a series of date stamps recording every time the weight was tested. Date stamps: 30.4.1866; 16.9.81, 30 12.86; 1.2.92; 10.5.97; 15.1.04; 10.2.09; 17.12.14; 20.4.20; 29.9.25; 23.1.31; 18.6.36; 14.7.41: 11.7.47 Exterior Top of Box: Remnant of paper pasted to wood. Faint printed text 'ON HIS MAJESTY'S SERVICE'.borough of eaglehawk, making a nation exhibition, city of greater bendigo commerce

This photograph depicts four men standing near a large unidentified building. This building is the entrance to a deep lead mine shaft. There is a bridge entering the building, which was used to access the elevator to the shaft. Deep lead mining involved placing large shafts into the ground which miners use to access deeper locations in order to excavate the rocks in the search for lead. Deep lead mining was highly dangerous as roofs could cave in of the soil was loose. Therefore, this particular mining considered to be highly undesirable profession as many miners did not want to work long hours nor risk their lives in the search for lead. Indigo Shire was a large area where deep lead mining took place, and thus the landscape and environment was largely impacted by these mining businesses. The Indigo Shire grew in population and wealth in the early 1850s when people came into this location in the hopes of finding gold and making a fortune. Ultimately, the accessibility and availability of gold and precious metals decreased once the gold reserves dried up and alongside this, the large population moved away. The Ovens was also heavily impacted environmentally as deep mining resulted in the change in land formation.The search for gold is ingrained into the history of Victoria and therefore, images like this one which portray an open cut sluicing site can reveal important information for society and technology for the date when the photograph was taken. This image is of important historical significance for its ability to convey information about the methods used to find gold in Indigo Shire. It also shows a location where deep mining was undertook which provides insight into the impact of deep mining on the environment at a time when it was done. This image is important for current research into the history of Indigo Shire, a region in Victoria's north-east. Therefore, this image has the capacity to be beneficial for research into society and the motivations of those living and working in this region during this period and therefore, has social significance. The Beechworth Burke Museum has additional images relating to deep lead mining and Indigo Shire which can be analysed and studied alongside images like this one.Sepia coloured retangular photo printed on gloss photographic paper.Reverse: 1997, 2510/ A02570/ Deep Lead Mining/ page 94/ 65%/ Burke Museum, Photo 44beechworth, burke museum, indigo shire, deep lead mining, mining, gold, gold mining

Rodd's was established by George & Ernest Rodd in Melbourne in 1919.They were manufacturers and wholesalers of precious metal jewellery. Later they began to manufacture high quality silver plated cutlery under the brand name “Rodd”. They then expanded into holloware when they took over Platers Pty. Ltd. who produced a very high quality range of silver plated Sheffield Reproduction Silverware, under the brand name “Hecworth”. Rodd’s established a large factory at 150 Barkly St., St. Kilda, Melbourne. During WW2 with a staff some 200, the factory produced ordnance components to help with the war effort. Rodd’s established sales offices in the main city centres of all States. The company prospered. In December, 1960, Rodd [Australia] Ltd. was merged with Mytton’s Ltd., Melbourne, and became part of the newly formed company Mytton Rodd [Australia] Ltd. Mytton’s were also producers of silver plated cutlery under the brand name “Grosvenor” and were strong competitors to the Rodd brand of cutlery Australia wide. It was a friendly take over and the Directors of Rodd [Aust.] Ltd. were appointed to the board of Mytton Rodd [Aust.] Ltd., and some to the Holding Company Mytton’s Ltd. Mytton’s were heavy manufacturing engineers producing a large range of stainless steel products including: kitchen sinks of various design, beer barrels [9 and 18 gallon kegs] for the breweries, milk vats for cooling and storing milk on dairy farms, a large range of dairy and industrial vessels, road transport tanks, LPG tanks, low pressure pre-mix vessels for the soft drink industry. They also produced a range of domestic bathes, steel railway sleepers, using their 3000 ton hydraulic presses. Mytton’s also had their own non ferrous foundry and rolling mill which produced nickel silver sheet used in the manufacturer of their silver plated cutlery. They also produced copper sheet for their own and industrial use. Mytton’s had factories in York St., South Melbourne and Port Melbourne. Rodd [Aust.] Ltd. set up a manufacturing, distribution plant in Auckland, New Zealand, circa 1960. This company began producing precious metal jewellery in a rented space in the premises of Matthey Garret Ltd., Bullion Merchants, in Drake St., Auckland. Later they moved into their own building in Sale St., Auckland. The company prospered and purchased land and built a factory at 121 Apirana Ave. Glen Innes, Auckland, circa 1964. ( B. McCulloch Rodd Pty Ltd)A butter knife with stainless steel blade and bone handle c1930on blade; RODD / STAINLESScutlery, stainless steel, cheltenham, moorabbin, bentleigh, early settlers, rodd aust ltd, mytton rodd pty ltd, aukland, port melbourne

Michael and Wendy Wilson have been living in Eltham for fifty years. Recently Michael decided to write what is an engaging and entertaining journey through Michael and Wendy’s life. He recounts his love of Wendy, his family, friends, and his many acquaintances, as well as his love of Eltham and district. Kate Palmer AM, wrote the forward for this book saying, “…it is a window into the world of a true craftsman, an award winning master goldsmith - an artisan who can transform precious metals, wood and gold into exquisite sculptures, jewellery and works of art”. Kate also says “This book is a tribute to Michael Wilson. A man who is fascinated by the world around him and who is inspired by his experiences in that world. Every piece tells a story – about emotion, about a man and his dreams and his fascination for all things engineering.” Michael also recounts his extensive love affair with things with four wheels, from billy carts as a boy, to the various cars he has enjoyed, particularly his favourite Lotus 7, which he states is “a sophisticated billy cart”. He also shares many memorable experiences with others pursuing automotive escapades. It is well written, informative, and just an amazing life story, a very personal record of a life well explored and well lived. - EDHS Newsletter Feb 2024."For the Eltham District Historical Society, Best Wishes, Michael"autobiography, eltham, goldsmith, jeweller, michael wilson. biography, artists, memoir

This photograph was captured at an undisclosed location and at an unidentified time but likely dates to approximately 1870. The photographer's details are not recorded and the identities of the men in the image are also not known. This image depicts a group of 10 men in typical miners fashion. Four of them are sat on a large log with one holding a small dog. Six miners stand behind those sitting. All these men are wearing a white button-up shirt and tan coloured work trousers. They wear heavy boots and seven have included a dark vest over their shirt. The man holding the dog has a pipe in his mouth. Two of these men are clean shaven with the remainder sporting a moustache and two with a beard. The ages of these men vary from late 20s to middle age. This group of men are located in a mining location with what appears to be an open cut mine in the background of the image. The ground is muddy and has elements which can help identify it as a mining location based on the condition of the landscape. The bottom of the men's trousers are muddy which provides the assurance that these men were working in this location when their photograph was captured. In the background there is one structure, possibly a dwelling, and bush which identifies the location as Australia. Open cut sluicing is a method used to extract gold and other precious metals from beneath the surface of the earth. This technique involved the use of high-powered hoses which broke down the soil enabling miners to come along and search this soil for gold. After the gold rush of the early 1850s, diggers had to enlist the assistance of heavy machinery and techniques like hydraulic sluicing in order to reach gold because the surface alluvial gold had already been discovered and removed. This heavy machinery was not used until after 1853. The search for gold is ingrained into the history of Victoria and therefore, images like this one which portray an open cut sluicing site can reveal important information for society and technology for the date when the photograph was taken. This image is of important historical significance for its ability to convey information about sluicing and the methods used to find gold in the late 1800s and early 1900s. It also shows a location where sluicing was undertook which provides insight into the impact of sluicing on the environment at a time when it was done. Images, like this one, of Australian gold rush history can reveal important information about the social and environmental impact of this period. This image depicts diggers standing in a mining location and therefore, this image has the capacity to reveal or support significant information for researchers studying the fashion and social status of diggers in Australia in approximately 1870. It can also provide information on the landscape of Australia in this period and the impact of mining for gold on both society and the Australian landscape. The Burke Museum is home to a substantial collection of Australian mining photographs which can be used to gain a deeper understanding into life on the gold fields, technology used in mining, the miners themselves and the impact of the gold digging on the environment.Sepia toned rectangular photograph printed on matte photographic paper mounted on board.Reverse: 1997.2518mining, goldfields, beechworth, 1870, australia, australian goldfields, diggers, victoria, sluicing, gold mining, miners, diggers victoria

This photograph depicts a large group of men in their work clothing situated in front of a large bank of earth. They are identified as miners working in an unidentified location in Australia. This photograph was taken by photographer Walter Thwaites sometime during the period of 1865-1908, likely c.1870. It is unsure where this image was taken since Thwaites travelled a lot over his photography career and the photograph is not annotated with this information. In addition, the identities of the men in the photograph are also unknown. These men are photographed in front of a large bank of earth where they had presumably been mining for gold or other precious metals. The men, with the exception of four, are wearing wide brimmed hats to protect their faces from the sun. They are also wearing loose fitting white shirts which are often worn beneath a darker coloured vest. They wear pale coloured work pants and boots. The men are mostly clean shaven with the exception of the moustache and a couple of beards. Two of the men have pipes in their mouth. Their clothing is basic and much less dramatic than the outfits worn by the gold diggers of the 1852 gold rush. These men, by wearing similar outfits, are expressing a sense of comradery or equality between them. It is likely that they are from the same, or similar, social status. They have an air of independence and share social equality in their stance and clothing. Walter William McLean Thwaites (1840-1908) was a professional photographer born in Sydney, Australia. He learnt the craft in his father's Hobart studio, but later embarked on his own solo career and toured every existing Australian colony between 1860 to 1888. The Thwaites family were a long line of photographers and artists with Thwaites' father Walter WIlliam Thwaites Sr working as an artist and photographer in Australia after moving from England in 1834. Walter Thwaites Sr's father, also named Walter Thwaites, was a British miniature portrait artist.Images, like this one, of Australian gold rush history can reveal important information about the social and environmental impact of this period. This image depicts over 30 diggers standing in front of a bank of earth and therefore, this image has the capacity to reveal or support significant information for researchers studying the fashion and social status of diggers in Australia in approximately 1870. It can also provide information on the landscape of Australia in this period and the impact of mining for gold on both society and the Australian landscape. The Burke Museum is home to a substantial collection of Australian mining photographs which can be used to gain a deeper understanding into life on the gold fields, technology used in mining, the miners themselves and the impact of the gold digging on the environment.Sepia toned rectangular photograph printed on matte photographic paper and mounted on board.Reverse: 1997.208 / MINERS. / W. Thwaites / Photography /australia, australian photography, photography, miners, gold rush, australian landscape, diggers, walter thwaites, thwaites photography, w. thwaites photography, social history

George Milford, a long term staff member of Thompsons Foundry Castlemaine, remembers discussing Alexander Sinclair with this son, Alex Sinclair Jnr. "When Alex Jnr was a boy, his father, a senior design engineer, was sent to Malaya to oversee the erection on site of a suction cutter dredge for Thompsons. This was an adaptation of the idea of a bucket-dredge, where gold is won from alluvial gravels. In the 1915-1920 era, the Thompsons Engineering Department designed a suction-cutter dredge, by which hydraulic suction with a revolving cutter at the end of a long proboscis would collect the alluvial soil and deliver it into the dredge for recovery of the precious metals. Export marketing was then ‘all the go’, and the tin dredges were ordered from Thompsons, using the new cutter design. The dredges were, of course, shipped to Malaya in pieces, ready to be assembled on site. A number of Thompsons employees were selected to travel to Malaya to assemble the dredges. There were fourteen men in the gang. These men sailed on 1st July 1925, their number including Delmenico, McKay and Charles Albert Hauser, an engine driver. C A Hauser died of malaria in Malaya shortly after arrival. Components for a further three of these dredges were in transit or on site when the first suction-cutter dredge was assembled and tested. The designers had failed to take into account the fact that, in the jungle floor in Malaya, many trees grow up, and fall down, in tropical conditions, and become submerged still waterlogged in the floor of the jungle, and in the tin-bearing gravels. The suction-cutter dredge was found to be inefficient in these circumstances, the price of tin had fallen and the Malayan client reneged on the contract. Faced with an outlay of over £4,000 on which no money would be received, the company went bankrupt on 25th August 1925. Alex Sinclair Snr was at that stage in Malaya, and received the news of the bankruptcy by telegram. Upon telegraphing his employers for funds to return home, he received the reply that there were no such funds available. Alex Sinclair Jnr told the story of how his father worked as a labourer in Malaya for two years, while his mother took in washing and ironing during the same period, until together they had assembled enough money to pay for his father’s return Anyone who talks about “the good old days” is talking nonsense!"Large blue printed paper plan outlining the conditions of contract for the making of a steel boiler. The Blueprint includes design drawings and written contract specifying materials, time frame and costs. Signed on front 'Alec Sinclair Consulting Engineer, 31 Queen Street, Melbourne'. Stamped on verso 'Printed by Paterson & Co, Colonial Mutual Chambers, Collins St, Melbourne'. blueprint, designs and plans, yarrawee suction dredge, conditions of contract, thompsons foundry castlemaine, george milford