Greensborough's Diamond Valley Sports and Fitness Centre need to expand to meet increases in basketball players.News clipping, black text. diamond valley sports and fitness centre, diamond valley basketball association

Panel from the exhibition held to celebrate the College's 70th anniversary in 2012. Photograph 1: Students with Bialik College banner, c. 1960s. Photograph 2: Prep class, 1968. Photograph 3: Year 6 class, 1969. Please contact [email protected] to request access to this record.shakespeare grove, bialik council, history, 2000s

Clothing. White nylon half slip petticoat. Elastic waist with decorative casing. Decorative scalloped blue stitching around seam on hem. Vents on both side seams at hem (5cm). Letter M monogram on front LHS. Blue stitching filled with satin fabric (26cmX10cm).Tag inside seam, ''ALL NYLON'' ''M''costume, female underwear, white nylon half slip petticoat

This may have been the camisole worn by the same bride as in 0087. It would be worn over her corset and under the bodice of her gown. This fabric must have been bought with a camisole in mind and the machine embroidery in place. It would have been embroidered on a Schiffli machine. It is interesting that the seams are hand stitched which may indicate that it was an item from a trousseau. There are ribbon insertion points along the top and bottom of the garment and although there are satin shoulder straps they could easily be tucked away or removed so that this could be worn under an off the shoulder gown. Packaged with note: "White cotton camisole hand stitched seams. Probably purchased fabric pre 1900".The Amess family owned Churchill Island from 1872 to 1929. This lace collection was owned and contributed to by four generations of Amess women,.Machine embroidery with small floral motifs Packaged with note: "White cotton camisole hand stitched seams. Probably purchased fabric pre 1900".janet amess lace collection, lace, churchill island, janet, amess, jane, corset, cover, machine, embroidery

Of type used by customers of Coles Cafeteria Melbourne circa 1940-1970. Displays mold marks on base, Mold G22M. Irregular glass thickness on base. Indent in rim to assist pouring. Evidence of two-piece mold seams.Clear glass milk jug (vial). Displays mold marks on base, evidence of two-piece mold seams.Mold G22Mmilk jug, coles cafeteria, glass bottle

A Lady's white, long, cotton half petticoat with a gathered flounce and lace insert at hem. The petticoat has a placket on the side seam and is fastened with bone buttons, The pioneer families had to be self sufficient making their own tools, clothing, while developing their market gardens, fruit orchards and dairy farms in Moorabbin Shire The pioneer women in Moorabbin Shire had to make and repair the clothes for themselves and their families and were accomplished in dressmaking, needlework , craftwork and knitting A Lady's white, long, cotton half petticoat with a wide flounce lace edging and bone buttons at side seam clothing, brighton, moorabbin, pioneers, dressmaking, market gardeners, early settlers, craftwork , bentleigh, lacework, moorabbin shire blackburn nance, dairy farms, fruit orchards

This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.Tool: a fuller, used to form a groove in heated iron. It is also referred to as a groover, seamer or fuller punch. Hand tool with round handle, flat round top and indented rectangular base. Base has grooves on long edges. flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, blacksmith tool, vintage tool, sheet metal fabrication, groover, seamer, hand tool, tinsmth, metalsmith, seaming tool, sheet metal worker, manual tool, smith's tool, fuller, grooving iron, punch

This hand groover is sometimes called a seamer, grooving iron, punch or fuller. It would have been used by a metal smith, such as a blacksmith, tinsmith or sheet metal worker. It is used to join two edges of metal. The smith overlaps the edges of the metal, then places the tool on top and beats it with a hammer on the top, forcing the metal into the tool's groove, which joins the metal. The device would be moved along the edges to complete the seam. The same tool could give a decorative finish to an artisan's work.This handmade tool was made for the particular purpose of joining sheets of metal together. The metal formed in this way could be used for water tanks, boilers and other similar items. It is an example of the equipment made and used in the trades of a metalsmith and blacksmith in the 19th and early 20th centuries.Tool: a fuller, used to form a groove in heated iron. It is also referred to as a groover, seamer or fuller punch. Hand tool with round handle, flat round top and indented rectangular base. Base has grooves on long edges. flagstaff hill maritime museum, maritime museum, shipwreck coast, great ocean road, blacksmith tool, vintage tool, sheet metal fabrication, groover, seamer, hand tool, tinsmth, metalsmith, seaming tool, sheet metal worker, manual tool, smith's tool, fuller, grooving iron, punch

This blazer was worn by John Freckleton at the Ballarat Teachers College in 1949. The Ballarat Teachers' College was established after the Victorian State Government and the State Education Department decided to establish two provincial teachers' colleges, at Ballarat and Bendigo. On 04 May 1926 W.H. Ellwood (Principal), Miss A. Bouchier, and Mr A.B. Jones, welcomed the first enrolment of 61 students to undertake the one year course. In 1927 the College moved to the former Ballarat East Town Hall in Barkly Street, which was remodelled for their use. It closed in December 1931 due to the Great Depression. In 1946 Ballarat Teachers' College reopened and relocated to the Dana Street State School. It was originally planned to open as a women's college, for whom the residence at 130 Victoria Street was purchased, but the decision was made to admit resident men from Ballarat. Mr T.W. Turner was appointed as Principal in 1951 and directed the introduction of a two year course for the Trained Primary Teachers' Certificate. The former one year course was terminated at the end of 1951. In 1958 the College was relocated to a custom built facility at Gillies Street, in close proximity to the Ballarat Botanical Gardens. Numbers increased with the introduction of the Trained Infant Teachers' Certificate course under the guidance of Mary Egan. With the introduction of a three year Diploma Course in 1968 accommodation became cramped. The introduction of the Diploma of Teaching (Primary) led to the Trained Infant Teachers' Certificate being discontinued in 1969, and the end of the Trained Primary Teachers' Certificate in 1969. Secondary Art and Craft students began studies at Ballarat Teachers' College in 1969 under Mr Ted Doney. In 1971 Mr D. Watson was appointed Principal. The State College of Victoria was proclaimed by Order in Council on 24 July 1973, and Ballarat Teachers' College became a constituent college of the State College of Victoria, and was known as State College of Victoria, Ballarat. By 1975 the College moved to Mount Helen as part of the Ballarat College of Advanced Education. Pre service teachers currently undertake their studies on the Mount Helen Campus of Federation University. ("Ruffians Attempted to Carry of the School Tent: A History of State Education in Ballarat", 1974, p73-4.)This unlined, 3 buttoned, royal blue woolen blazer is bound with twill tape in a matching colour. It has a patch pocket on either side near the bottom hem line and a breast patch pocket with an embroidered emblem of the Ballarat Teachers College. Under this emblem is embroidered in stem stitch 'B B' in brown and yellow. The pockets are all bound at the top and the sleeves have a trim binding about 8.5 cm from the cuff. The inside seams are all bound.The fabric label says - Paterson, Powell Pty Ltd Ballarat Attached to the shoulder seam is a tape with a handwritten - Georgeballarat teachers' college, blazer, costume, textiles, uniform, embroidery

Clothing. Pink nylon women's panties with gusset and elasticized legs trimmed with 3.5 cm coffee coloured lace with brown frilled edge. Elasticized waistband.Tag on inside seam, ''SW ''.costume, female underwear, woman's pink nylon panties

Another delicate item, this bed jacket has been made with machine made cotton net which has seams joined with bobbin tape. The hand appliqued motifs on the back of the jacket are possibly Princess lace which is a type of tape lace made in Belgium in the late nineteenth and twentieth centuries. There are two types of Princess lace, one is where the tape shapes are sewn on to net and the other is where the shapes are linked together to form a type of guipure lace. This could be an example of the former known as an applique lace. Unfortunately one of the cuffs has become detached. Packaged with note: "Limerick lace bed jacket Janet Amess 1860 from Kel Bright collection with separated cuff" Packaged with note: "Machined lace bed jacket. Janet Amess 1860The Amess family owned Churchill Island from 1872 to 1929. This lace collection was owned and contributed to by four generations of Amess women.Motifs hand sewn on to machined net; bobbin tape on seams (NGV) Princess machine lace machine made motifs hand-applied Packaged with note: "Machined lace bed jacket. Janet Amess 1860. From Kel Bright Collection with separated cuff".janet amess lace collection, lace, churchill island, janet, amess, bed, jacket, garment, clothing, hand, sewn, bobbin, machine

These Lady's white voile shirt fronts were made for a small woman or child to wear under a suit jacket . The front has fine vertical pintucks and ribbon waist ties The back seam is fastened with press studs. The high collar has horizontal pintucks and 4 metal wire stays. The early settler women were skilled dressmakers and craft workers. These Lady's voile shirt fronts are examples of the high dressmaking skill of the women of the early settler families in Moorabbin Shire c1900 2 identical small lady's white voile shirt fronts, with high collar and ribbon waist ties. The front has fine vertical pintucks and the high collar has horizontal pintucks with 4 metal wire stays. Press studs fasten the back seam . clothing, dressmaking, haberdashery, crochet, brighton, moorabbin, mckinnon, ormond, pioneers, market gardeners, early settlers, craftwork , bentleigh, lacework, moorabbin shire, hunt ailsa, dairy farms, fruit orchards

Clothing. Pale pink nylon woman's panties with gussett and elasticized legs trimmed with 2cm gathered nylon ruffle. Triangular inserts above each leg of transparent nylon fabric with printed floral pattern. Above each insert is a decorative pink bow (5cmX1cm). Elasticized waist band.Tag on side seam ''NYLON SW''costume, female underwear, woman's pale pink nylon panties

This small medicine glass has ho manufacturer's or owner's marks. It has no side seams, the base is slightly concave, the embossed inscriptions are inside the glass, the clear glass has slight imperfections and ripples, and the glass is slightly opaque below the lip; these features point to the glass being blown into a mould, partially set, and spun between that mould and an internal mould that had the embossing on it, called a turn-mould process. The lip was then ground to be smooth. The process was patented in 1887 with the title of "Mold for blowing turned bottles".This medicine glass is significant as an example of medical equipment that has a design still used today. It is significant also for having the embossing inside the glass, which was likely produced by the turn-mould method of bottle (and container) making.Medicine glass or dose cup; clear glass with small imperfections and ripples in the glass, no side seams and a slightly concave base. All embossed marks are inside the glass. The imperial measurements are in graduated scales for tablespoons, teaspoons, and ounces and drachmas. "OUNCES DRACHMS" "TABLE TEA"flagstaff hill, warrnambool, shipwrecked coast, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, medicine glass, measuring glass, dose cup, medicine dispensing, medicine measurement, sambell pharmacy warrnambool, sambell chemist and dentist, internal embossing, glass embossed inside, 20th century chemist, blown glass, two-piece mould, turn-moulded glass, turned bottles

These items were made as samplers either at school or most likely college. They are samples of embroidery stitches, seam types and sewing and knitting techniques.Nos 1-16 are group of samplers made from cotton lawn, cotton with sateen weave and flannel and made by Ruth McGannon. No 17 is a pair of gloves made by Margaret Russell. .1) A small square of yellow lawn with three horizontal rows in blue thread and three vertical rows in red thread of running stitch each 3.5 centimeters apart. The edges are frayed to 1.2 centimeters. .2) A larger rectangle of yellow lawn with three horizontal rows 7.8 centimeters apart and three vertical rows 10 centimeters apart of long stitch, stitched in blue thread. The edges are frayed to 2 centimeters. .3) A small square of yellow lawn with three horizontal rows and three vertical rows of blue thread of running stitch, each 1.9 centimeters apart. The edges are frayed to 1.5 centimeters. .4) A larger rectangle of yellow lawn with three horizontal rows 9 centimeters apart and three vertical rows 11.2 centimeters apart of running stitch, stitched in red thread. The edges are hemmed with two rows of long stitch .5 centimeter apart with a loose blue thread of laced running stitch weaving in and out of the red long stitch. .5) A rectangle of hemmed yellow lawn with a pocket formed at each end. Two rows of long stitch in red thread hem the edges with a blue thread stitched between each red stitch. The pockets are formed by turning back the edges and stitching them down in brown thread. R.M. is embroidered in brown chain stitch on the right side. .6) A rectangle of hemmed blue lawn the same as the previous piece but with five rows of back stitch in yellow and orange thread creating a pattern. .7) A rectangle of blue lawn with the top and bottom edges hemmed with two rows of long stitch close together in yellow and orange. The other two edge are frayed to 2.5 centimeters and has four rows of long stitch .7 centimeter apart in yellow and orange thread. .8) A blue lawn bag with two packets was made by hemming a rectangle of fabric on three sides in long stitch with orange thread, then yellow thread between the stitches. The fourth side is hemmed in hemming stitch in yellow thread with blanket stitch in yellow thread along the edge. This edge is folded up by one third to create a pocket. The edges on either side are stitched together. A row of chain stitch in orange thread is stitched down the middle to create two pockets. A tape is stitched to either side at the top and this is folded over the pocket. .9) A cream cotton with sateen weave rectangle is hemmed with a double row of orange thread in long stitch. On both sides is embroidery in orange and yellow thread. .10) A yellow cotton with sateen weave baby's bib is made from a rectangle of fabric with a semi circle cut out of the top. The edges are turned and hemmed with a narrower turning on the neck. A tape is stitched at either side of the neck. On the front is embroidered a train in blue and yellow threads. .11) A yellow lawn embroidery sampler using blue and brown thread shows long stitch, stem stitch, herringbone stitch, chain stitch, fly stitch, lazy daisy stitch, cross stitch and satin stitch. It is hemmed using drawn thread work and the bottom is scalloped and finished in blanket stitch. .12) A pink lawn embroidery sampler with green thread shows herringbone stitch, stem stitch, running stitch, chain stitch, cross stitch, lazy daisy stitch, fly stitch, feather stitch, satin stitch and back stitch. The bottom is scalloped and finished in buttonhole stitched. The other three edges are hemmed using drawn thread work. .13) A small cream flannel square with two smaller squares are stitched together down the middle in decreasing sizes using chain stitch. The largest piece is hemmed using both herringbone and a decorative blanket stitch. It also has a run and fell seam on the opposite side using both running and herringbone stitches. A row of feather stitch is on either side of the seam. The two smaller squares are frayed on the edges. .14) A cream rectangular flannel sampler has two seams along the length. One is a run and fell seam using running and herringbone stitches and the other is an open seam using running stitch and both edges are stitched down with herringbone stitch. The two shorter edges are bound and the longer edges have a tape which is stitched down to neaten the edges. On the right side are two rows of feather stitch. .15) This blue lawn apron has a rectangular gathered skirt which is attached to a waistband and in turn attached to a bib front which goes over the head. The bib and skirt sides are hemmed using decorative blanket stitch in pink and dark blue thread. The skirt hem and both sides of the waistband are stitched in two rows of herringbone in pink and dark blue thread. .16) This pale pink lawn child's shirt has french seam side seams, a waist band to which the shirt is attached using slight gathering. The sleeves have cuffs. There is a front facing and a collar and there is a small pocket in the left hand breast. .17) These yellow knitted gloves are made using plain stitch for the hand and rib for the wrist.Written on paper and stitched on to a couple of items - Ruth McGannon V.3 - 312 Written on paper and stitched to the gloves - Margaret Russell x No2embroidery, sampler, gloves, stitches, sewing, knitting, apron, costume, needlework, dressmaking, textiles

Clothing. Cream coloured woman's panties with gussett and straight legs trimmed with 4 cm lace. 7cm vents each side seam on lower leg. 4cm lace inserts on side seams. Elastic lace waistband with decorative bow (4cmX1cm) at centre front. Sticker on lower front left leg (green and yellow) ''THE DAISY COLLECTION''and a picture of a white daisy. Swing tag still attached.Tag inside back seam''LITTLE LUXURIES BY GLORIA'' Size 16 to fit bust 95 cm Hip 100cm, Bri Nylon . Made in Australia. Warm hand wash. Do not bleach. Do not hand wring. Drip dry in shade, warm iron. Swing tag Black And Gold, ''Little Luxuries by Gloria''. Reverse style 510931, size 16 Price--- Australian Made Boomerang Symbol.costume, female underwear, woman's cream coloured panties

Green wool felt pennant with stitched side seam and white cotton tape tie sewn in seam.Front: JEPARIT / VIC. / SIR ROBERT MENZIES PARK Back: Lake Hindmarsh / JEPARIT / VIC.jeparit, victoria

Clothing. Cotton knickers, peach coloured, pure cotton interlock. Silk lace insert 4 cms wide at each leg. Cotton gusset. Size SW.Inside seam label. Hanro. SW 100% cotton.costume, female, underwear

Ethyl chloride was first used as a general anaesthetic in 1847, by Johann Ferdinand Heyfelder (1798-1869), a German surgeon. Once ethyl chloride became readily available, it was again taken up as a general anaesthetic in the late 1890s (USA). Ethyl chloride evaporates very quickly so that when it is sprayed onto the skin it produces very cold temperatures. “Refrigeration anesthesia”, or cryoanesthesia, refers to the anesthesia produced when the skin is significantly cooled.Due to its rapid onset, ethyl chloride was often used to induce general anaesthesia. It would be followed by a second anaesthetic, such as ether or nitrous oxide, which would be used for the remainder of the procedure. (The Wood Library Museum, 2016) The bottle has clear side and base mould seams which indicate it was made using a cup bottom mould.Glass bottle with paper label, metal fastening at the top and cream coloured plastic sealant at the neck. The bottle has clear side and base mould seams which indicate it was made using a cup bottom mould.Printed on main label at front: 100 c.c. 3 1/2 fl. ozs. / MEDICINAL CHEMICALS CORP [illegible] / MEDCO / ETHYL CHLORIDE / PURE / This Product conforms to all the re-/quirements of the BRITISH PHARMA-/COPCEIA, 1932, for / GENERAL ANAESTHESIA / Manufactured by / MEDICINAL CHEMICALS CORPORATION PTY. LIMITED / 39 Martin Place, Sydney Printed on round label on reverse side: 6d. / Cred [illegible]this container if returned in good order and condition. Stamped into underside of bottle: CM / S99ethyl chloride, medco, medicinal chemicals corporation pty. ltd, dr [e.s] holloway, bottle

This handmade ‘gallon’ style of bottle was generally used for storing and transporting wine and ale. Many bottles similar to this one have their bases embossed with “6 TO THE GALLON”. It is one of many artefacts recovered from unidentified shipwrecks along Victoria’s coast between the late 1960s and the early 1970s. It is now part of the John Chance Collection. The capacity of this is one-sixth of a gallon (imperial measure), which is equal to 758 ml. (American bottles were often inscribed “5 TO THE GALLON”, which is one-fifth of an American gallon, equal to 757 ml.) Contemporary home brewers can purchase new ‘6 to gallon’ bottles that hold 750 ml. and are sold in cases of 36 bottles, which is equal to 6 gallons of wine. Glass was made thousands of years ago by heating together quartz-sand (Silica), lime and potash. Potash was obtained from burnt wood, but these days potash is mined. The natural sand had imperfections such as different forms of iron, resulting in ‘black’ glass, which was really dark green or dark amber colour. The ‘black’ glass was enhanced by residual carbon in the potash. Black glass is rarely used nowadays but most beer, wine, and liquors are still sold in dark coloured glass. Glass vessels were core-formed from around 1500 BC. An inner core with the vessel’s shape was formed around a rod using a porous material such as clay or dung. Molten glass was then modelled around the core and decorated. When the glass had cooled the vessel was immersed in water and the inner core became liquid and was washed out. Much more recently, bottlers were crafted by a glassblower using molten glass and a blow pipe together with other hand tools. Another method was using simple moulds, called dip moulds, that allowed the glass to be blown into the mould to form the base, then the glassblower would continue blowing free-form to shape the shoulders and neck. The bottle was then finished by applying a lip. These moulded bottles were more uniform in shape compared to the free-form bottles originally produced. English glassblowers in the mid-1800s were making some bottles with 2-piece and 3-piece moulds, some with a push-up style base, sometimes with embossing in the base as well. Improvements allowed the moulds to also have embossed and patterned sides, and straight sided shapes such as hexagons. Bottles made in full moulds usually displayed seam seams or lines. These process took skill and time, making the bottles valuable, so they were often recycled. By the early 20th century bottles were increasingly machine made, which greatly reduced the production time and cost. This bottle is historically significant as an example of a handmade, blown inscribed glass bottle manufactured in the mid-to-late 1800s for specific use as a liquor bottle with a set measurement of one-sixth of gallon. It is also historically significant as an example of liquor bottles imported into Colonial Victoria in the mid-to-late 1800s, giving a snapshot into history and social life that occurred during the early days of Victoria’s development, and the sea trade that visited the ports in those days. The bottle is also significant as one of a group of bottles recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection of shipwreck artefacts by his family, illustrating this item’s level of historical value. Bottle, brown glass, handmade. Tall slim Gallon style liquor bottle. Applied, double collar lip; square upper with flared lower. Neck has seams and shoulder seam from 3-piece mould. Body with horizontal ripples tapers inwards to base. Push-up base with pontil mark and embossed inscription. Tape over wire around mouth. Cork remnants inside mouth. Embossed on base "6 TO THE GALLON"flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, 6 to the gallon bottle, handmade, dip mould, mouth blown, pontil mark, blown bottle, liquor bottle, ale bottle, double collar, 19th century bottle, collectable

This handmade ‘gallon’ style of bottle was generally used for storing and transporting wine and ale. Many bottles similar to this one have their bases embossed with “6 TO THE GALLON”. It is one of many artefacts recovered from unidentified shipwrecks along Victoria’s coast between the late 1960s and the early 1970s. It is now part of the John Chance Collection. The capacity of this is one-sixth of a gallon (imperial measure), which is equal to 758 ml. (American bottles were often inscribed “5 TO THE GALLON”, which is one-fifth of an American gallon, equal to 757 ml.) Contemporary home brewers can purchase new ‘6 to gallon’ bottles that hold 750 ml. and are sold in cases of 36 bottles, which is equal to 6 gallons of wine. Glass was made thousands of years ago by heating together quartz-sand (Silica), lime and potash. Potash was obtained from burnt wood, but these days potash is mined. The natural sand had imperfections such as different forms of iron, resulting in ‘black’ glass, which was really dark green or dark amber colour. The ‘black’ glass was enhanced by residual carbon in the potash. Black glass is rarely used nowadays but most beer, wine, and liquors are still sold in dark coloured glass. Glass vessels were core-formed from around 1500 BC. An inner core with the vessel’s shape was formed around a rod using a porous material such as clay or dung. Molten glass was then modelled around the core and decorated. When the glass had cooled the vessel was immersed in water and the inner core became liquid and was washed out. Much more recently, bottlers were crafted by a glassblower using molten glass and a blow pipe together with other hand tools. Another method was using simple moulds, called dip moulds, that allowed the glass to be blown into the mould to form the base, then the glassblower would continue blowing free-form to shape the shoulders and neck. The bottle was then finished by applying a lip. These moulded bottles were more uniform in shape compared to the free-form bottles originally produced. English glassblowers in the mid-1800s were making some bottles with 2-piece and 3-piece moulds, some with a push-up style base, sometimes with embossing in the base as well. Improvements allowed the moulds to also have embossed and patterned sides, and straight sided shapes such as hexagons. Bottles made in full moulds usually displayed seam seams or lines. These process took skill and time, making the bottles valuable, so they were often recycled. By the early 20th century bottles were increasingly machine made, which greatly reduced the production time and cost. This bottle is historically significant as an example of a handmade, blown inscribed glass bottle manufactured in the mid-to-late 1800s for specific use as a liquor bottle with a set measurement of one-sixth of gallon. It is also historically significant as an example of liquor bottles imported into Colonial Victoria in the mid-to-late 1800s, giving a snapshot into history and social life that occurred during the early days of Victoria’s development, and the sea trade that visited the ports in those days. The bottle is also significant as one of a group of bottles recovered by John Chance, a diver in Victoria’s coastal waters in the late 1960s to early 1970s. Items that come from several wrecks have since been donated to the Flagstaff Hill Maritime Village’s museum collection of shipwreck artefacts by his family, illustrating this item’s level of historical value. Bottle, brown glass, handmade. Tall slim Gallon style liquor bottle. Applied double collar lip; square upper and flared lower. Neck has seams and shoulder seam from 3-piece mould. Body tapers towards base. Push-up base with pontil mark and embossed inscription. Base is uneven. Mouth has remnants of the seal in it and tape remnants around its outside. Embossed on base "6 TO THE GALLON"flagstaff hill, warrnambool, flagstaff hill maritime museum, maritime museum, shipwreck coast, flagstaff hill maritime village, great ocean road, shipwreck artefact, john chance, glass bottle, antique bottle, gallon bottle, 6 to the gallon bottle, handmade, dip mould, mouth blown, pontil mark, blown bottle, liquor bottle, ale bottle, double collar, 19th century bottle, collectable

Peach coloured nylon nightgown made by HANRO Bendigo. Bodice gathered at front onto a plaited band under the bust. On each side of the band three ties (102cm) extend from the ends of the plaited band. Shoulder straps made up of three pieces of nylon tubing attached back and front and plaited over each shoulder. Back of bodice in two pieces. Ankle length A line skirt. Colour at bodice is pale peach colour that darkens as it descends to the hem where it becomes a deep orange colour. Nightie given to donor by her grandmother who received the nightie as a prize at a Hanro meeting. Donor's uncle John Preston, father George Preston and mother Gwen Washington (machinist) all worked at Hanro.HANRO 100% Nylon SW on tag on lower side seamcostume, female, peach coloured nightgown

Clothing. Pale blue nylon woman's panties with gussett and elasticized legs trimmed with 2cm nylon fabric frill. V shaped panel insert on front surrounded by 6cm scalloped blue and white lace. Garment may be a 'second' as scalloped lace is stitched inside the garment instead of on the outside as a decorative trim. Elasticized waist band.Tag on inside seam, ''GEN TEX ALL NYLON W''costume, female underwear, woman's pale blue nylon panties