Geelong Tramway Inspector in winter long coat.Black and white print on paper.11/7 and GS 710/11/1/7 written in pencil on the reverse. No. 2 in a circle written in ink on the reverse.tramways inspector, geelong tramways, geelong tramways uniform, tramways uniform coat

BHS CollectionBlack and white photo. Three men standing dressed in tramways uniform. The man in centre dressed in dark uniform, two men on side dressed in short grey dust coats, worn over dark trousers. Man on left holding roll of paper. Part of Basil Miller Collection.Unknownperson, individual, basil miller

An original piece of SEC Tramway Uniform which has since been used by a Tramway volunteer driver.HighA bottle green, woollen tramways Great Coat manufactured by David Klein Pty. Ltd, of 22 Patrick St., South Melbourne (Ph 323771) The coat is trimmed at the lower sleeve edges and pocket edges with black leather strips which are completed with half circles of leather to strengthen the opening of the pockets. Both coat fronts are fully lined, and the back is lined to the waist. The coat is buttoned to the neck with five standard State Electricity Commission of Victoria metal buttons with the shield and lettering embossed and raised on each. There are two additional buttons positioned to the side of the lapels. Three of the buttons are secured on the under side with small, metal split rings. The back of the coat features a waist band, and a lower box pleat for ease of movement. The makers label positioned on the inner lining of the LH front, is labelled "L. MCMAHON S.E.C. B/RAT No 23 - O/N D.I 104083" secv, btm, uniform, great coat

The badge belonged to the Donor's father - Bill Irvin, who was a SEC tram driver. Bill and his elder brother Dan, both drove trams in Ballarat. The Union badge confirmed membeship of the Union and was permitted to be worn on a uniform.Has a strong association with Bill Irvin, SEC tram driver of the 1930's and demonstrates the importance of being a union member at the time and the badge provided by the unionAustralian Tramway Employees Association (Tramways Union) badge. Badge made on a steel/ silver backing with words "Australian Tramway Employees Association" on outer edge of badge with a royal blue enamel background. In centre of badge has the Australian coat of arms with a railway type spoke wheel above the logo and underneath the coat of arms the words "Federated Australia" in a banner. Has a hole in the top of the badge for a steel ring or a method of attachment to a uniform. On back of badge has stamped into the badge "BL 42", possibly indicating Ballarat and badge number. On the base of the badge has words "Wittenbach " cast into the badge. tramways, trams, unions, badges, atea, employees, bill irvin

Demonstrates Uniform items and yields information about the manufacture of heavy overcoats for winter use in Ballarat.. Has a strong association with a former SEC crewman.Great Coat or Overcoat - double breasted, complete with buttons. Great Coat or Overcoat - bottle green colour Coat given to donor by Leo McMahontrams, tramways, uniforms

Type of coat worn by SEC tram crews in Ballarat from the mid 1930s through to 1971. Demonstrates the SEC Uniform in 1921. It is significant for its good condition, which is rare for an item of its age.Green woolen coat with brown leather detailing on sleeves and pockets, and three brass buttons. Buttons - "State Electricity Commission of Victoria 1921" Tag - "David Klein PTY LTD" "22 Patrick Street, Melb. 32 3771" "Name J. Mason SEC Ballarat" "Date D.I 258716" "Pure Wool" btm, uniforms, conductors, ballarat tramway museum, coat, jacket

The Motorman or Conductor in winter uniform with SEC type number on his hat and a 3-button coat. The change in coat design would suggest that these photographs were taken in the late 1930s or in the 40s when uniforms would have been standardized across the three regional tramways in Victoria.Black and white print on paper.11-3 and GRS710/11/1/3 written on the reverse in pencil. No. 3 in a circle written on the reverse in pen.motorman, conductor, sec uniform c1930, tramway winter uniform c1930

Possibly a Motorman in winter coat (as there are no lapel badges). SEC type numbers are on the latter two hats. The Conductor badges on coat lapels and 5-button coats must have been retained by the SEC for a while. The date of these photos would be 1930s.Black and white print on paper11/13 and the No. 1 in a circle, written in pen on the reverse. GRS710/11/1/13 written in pencil on the reverse.mesco's winter uniform c. 1912-1930, mesco motorman, duncan and fraser tramcar, geelong tramway depot

Set of photographs taken together displaying Geelong tramway uniforms in the early SEC era, possibly Motorman in winter coat (as there are no lapel badges).Yields information about the type of uniform worn by tramways personnel in Winter.Black and white print on paperPLATE NUMBER 11/14 hand-written on the reverse of the photograph.tramways, geelong, mesco

Set of photographs taken of the first women employed on SEC tramways in Geelong; as conductresses in 1942. (See also Item 9260 and 9261). They are standing in front of a Duncan and Fraser tramcar that, perversely, was modified for 'one man' operation about ten years previously. On the tram saloon window behind them, people are being encouraged to lend to the war effort through War Savings Certificates. Note the four button coats.Black and white print on paper.The No. 2 inside a circle and 21-1 printed in ink on the reverse. GSR710/21/1/1 printed on the reverse in pencil.geelong tramways, duncan and fraser tramcar, first geelong female conductresses, tramway four button uniform jacket

Set of photographs taken of the first women employed on SEC tramways in Geelong: as conductresses in 1942 (Also see items 1958 and 1960). They are standing in front of a Duncan & Fraser tramcar that, perversely, was modified for 'one man' operation about ten years previously. On the tram saloon window behind them, people are being encouraged to lend to the war effort through War Savings Certificates. Note the four button coats.Black and white print on paper.The No. 1 in a circle written on the reverse in ink. GRS710/21/1/5 and 21-5, written in pencil on the reverse.geelong tramway first conductresses, duncan and fraser tramcar, geelong tramway uniform four button jacket

Used on SECV Uniform coats and great coats.Demonstrates the manufacture of uniform items and their use in uniforms for tramway crews in Ballarat.SEC uniform clothing button 24 diameter, with SEC crest, 1921 and organisation name embossed onto outer surface, with backing piece and brass wire lug for sewing on rear. Nickel plated silver? Has Manufacturers name stamped on rear - Stokes & Sons Melbourne.tram, trams, secv, ballarat tramways, uniforms, buttons

Demonstrates uniform cap manufacture. Appears to be unworn.SEC Motorman/Drivers/Conductors cap - green cloth exterior, grey cotton interior lining, brown leather internal hat band, black cotton hat band on exterior with a plastic band at the front half of the cap terminating in two small SEC metal buttons on either side, black plastic peak. Sewn on the inside is a label "Commonwealth Government Clothing Factories Melbourne" and stamped "6 1/2". On the right hand side of the inside of the brown band, stamped in gold is the Australian Coat of Arms and the words "A quality product / made in Australia / by the Dept. of Supply". Appears never to have been used.tramways, trams, ballarat, uniforms, cap

Demonstrates the manufacture of uniform items and their use in uniforms for tramway crews in Ballarat and has a very strong association with well known Tramway identity in Ballarat.SEC uniform clothing button from uniform of Lew Walker, SEC Motorman, on last day of service. 24 diameter, with SEC crest, 1921 and organisation name embossed onto outer surface, with backing piece and lug for sewing on rear. Nickel plated silver? STATE ELECTRICITY COMISSION OF VICYTORIA 1921tram, trams, secv, ballarat tramways, uniforms, buttons, btm

Demonstrates the manufacture of uniform items and their use in uniforms for tramway crews in Ballarat.SEC uniform clothing button 24 diameter, with SEC crest, 1921 and organisation name embossed onto outer surface, with backing piece and brass wire lug for sewing on rear. Nickel plated silver? Has Manufacturers name stamped on rear - Stokes & Sons Melbourne.tram, trams, secv, ballarat tramways, uniforms, buttons

Has a strong association with the early days of the BTPS in preparing to move the tramcars from the depot and working at the former SEC depot itself in dismantling 0 road..Set of five black and white photographs, showing a SEC employee modelling different type of uniforms, c1950/1960. .1 - Winter uniform with Great Coat on - cap badge No. 44 .2 - Summery uniform - no jacket, long sleeve shirt and tie - cap badge No. 44 .3 - Inspectors summer uniform - no jacket .4 - as for .3 .5 - Inspectors winter uniform with Great Coat and cap. See also Reg Item 3907 for a mounted set of these photographs. See also Reg item 1368 for a set of photographs of later uniforms.trams, tramways, secv, uniforms, crews, inspectors

Yields information about the SEC uniform that was proposed or being introduced as part of the rehabilitation of the Ballarat / SEC tramwaysSet of six black and white photo prints from collected negative of Ballarat employee wearing the SEC tramway uniform of the time, late to mid 1930's. Has a brick wall behind, possibly taken at the power house. 1368.1 - full height view of the person where the uniform with cap. 1368.2 - close up, top half, showing cap number (53) and designation - Conductor. 1368.3 - full height view of the person wearing a greatcoat over the uniform. 1368.4 - rear of view of 1368.1 1368.5 - side view of 1368.1 1368.6 - close up, front on, top half showing same details as 1368.2 Copy 2 - of all above photos - large format prints (253H x 203W) - added 30/7/2007, ex Alan Bradley holding of prints, received 5/2007. Generally a closer up crop of the person wearing the uniform. See also Reg Item 3907 for a mounted set of these photographs. See also Reg item 4634 for a set of photographs of later uniforms. Copy negatives scanned 18/5/2020 and images updated. tramways, trams, uniforms, conductors, great coats, cap or badge number

Demonstrates the manufacture of uniform items and their use in uniforms for tramway crews in Ballarat and a larger set and a strong association with a SEC tramway employee.Set of twelve SEC uniform clothing buttons from a former Ballarat Tram driver. Each about 24 diameter, with SEC crest, 1921 and organisation name embossed onto outer surface, with backing piece and lug for sewing on rear. Nickel plated silver? Badges in varying condition of new to worn. Each has name of manufacturer stamped on rear part - "Stokes & Sons Melbourne". Donor of items 1259, 1260 and uniform jackets. Six further buttons added 5/7/2017 from donation of Wendy Hunt.tram, trams, secv, ballarat tramways, uniforms, buttons

One worn TB uniform clothing buttons donated by a former Ballarat Tram driver. Button about 23 diameter, with TB crest, with backing piece and lug for sewing on rear. Nickel plated silver? Badge has been worn on a jacket as in poor condition compared to new. Has name of manufacturer stamped on rear part - "Buttons Ltd" of Birmingham, England with their trade mark, a pair of fully opened scissors. See tm1762i2 for image. Donor of items 1259, 1260 and uniform jackets.tram, trams, mmtb, melbourne tramways, uniforms, buttons

Photograph shows the crew of a four wheel tram standing in uniform - Motorman "Matey" Clark and Conductor Kemp at Kew Depot. The Motorman is wearing a grey great coat, the Conductor has lapel badges on his jacket, there are no cap badges. c1922? Photograph is included in item 8295, "My Uncle Bill".Yields information about the Kew Depot crews c1922.Photograph - Black and White - with notes on rear and negative.In ink "Motorman Left Matey Clark, Conductor Kemp right, Kew Depot"mmtb, tramways, tram crews, uniforms

Coat button - round metal with a stamped imprint of The Met logo and painted gold. Has an eyelet or ring fixed to the back and with the raised letters "Stokes and Sons".trams, tramways, buttons, the met, uniforms

Set of six large gold Coat button and four small cap buttons. Has an eyelet or ring fixed to the back and stamped either "Stokes and Sons Victoria" or "Stokes and Sons Australia" 8 additional buttons added from Ron Scholten 11-6-2022.trams, tramways, buttons, mmtb, uniforms

MMTB Winter Jacket, woolen of the style issued to tram and bus crews in the 1950s. Has not been used. Delivery docket dated 18/4/1955, for Foster at Hanna St depot.Yields information about the style of jacket worn by MMTB tram and bus crewsCoat or Jacket - navy blue wool with MMTB logo lapels, leather trim on lower pockets - standard issue, about a size 42, fitted with three buttons, with delivery docket sewn onto the inside of the jacket - never used.See delivery docket photommtb, tramways, crews, conductors, uniforms

Each button has the logo of the Melbourne Tramway and Omnibus Co. pressed into the front of the badge - a M interwoven with a T. All made by Stokes and Sons of Melbourne. Worn by Cable Tram employeesDemonstrates buttons worn by the MTOCo staff.Set of five MTOCo coat buttons fitted with hooks - nickel plated brass - 3 large coat, 2 small sleeve or cap.trams, tramways, cable trams, mto co, buttons, uniforms

Button has the raised letters "P & M Tramway Trust" on the front of the badge and the imprint of Stokes & Sons Melbourne on the rear. Used by the Prahran and Malvern Tramways Trust for their Uniforms. See item 517 for another example.Demonstrates buttons worn by the PMTT staff.Button, brass fitted with a hook and a clip - small sleeve or cap.trams, tramways, buttons, uniforms, pmtt

Set of three coat buttons: 1 - Small Prahran and Malvern Tramways Trust - PMTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. 2 - Large PMTT - heavily worn - made by Stokes and Sons Melbourne - approx. 26mm dia - missing lug. 3 - MMTB button or Badge - damaged - made by Buttons of Birmingham UK - approx. 25mm dia. Each button has a backing piece on rear with a lug (except for 2) for sewing onto a jacket and have name of manufacturer stamped on rear part. "Buttons Ltd" of Birmingham, England has their trade mark, a pair of fully opened scissors.trams, tramways, mmtb, melbourne tramways, uniforms, buttons, pmtt

Small Hawthorn Tramways Trust - HTT - made by Stokes and Sons Melbourne - approx. 20mm dia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part.trams, tramways, melbourne tramways, uniforms, buttons, htt

Set of five nickel silver MMTB Coat buttons. Three of the buttons (approx. 22mm dia) are made by Stokes and Sons Melbourne and the two (approx. 25mm dia) are made by K. G. Luke Australasia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. The Stokes and Sons badges are two small holes in the rear, while the Luke's badges do not.trams, tramways, melbourne tramways, uniforms, buttons, mmtb

Button used by The Met on their uniform jackets with the first logo or symbol used by The Met.Demonstrates a The Met Uniform button.Button - brass - The MTA (Metropolitan Transit Authority) of The Met logo with a raised metal finish - made by Stokes Australia - approx. 23mm dia. The badge backing piece is brass. It is fitted with a lug for sewing onto a jacket and have name of manufacturer stamped on rear part. Two copies held. The second copy has a section of thread wound around the lug,"Stokes & Sons Australia" stamped on the rear.trams, tramways, melbourne tramways, uniforms, buttons, the met, mta

Set of four types of coat buttons: 1 - MMTB button or Badge - brass - made by Buttons of Birmingham UK - approx. 25mm dia. 2 - MT - (Cable tram) button - brass - made by Stokes and Sons Melbourne - approx. 25mm dia. (this is to be clarified as at 24/6/2018, though see detailed image of a conductor in uniform - Reg Item 1961.) 3 - Dept of Govt Transport - Tasmania? - has a crown in the centre, - nickel silver with brass back and formed loop to sew onto a jacket or be pinned. 4 - Two badges both with the Islamic symbol and star (5 points) - brass, one marked "Tramways" and the other "Tramways Caire" - Cairo. The first badge made by "A. Meyer & Co. Wien".trams, tramways, melbourne tramways, uniforms, buttons, cairo, tasmania, cable trams