cresalo, vaporizing, lamp

Cresalo Vaporizing Lamp. Sigma Co. Ltd. Manufacturing Chemists Melbourne. Instructions to side. Brown & White Cardboard Box. Glass bottle with metal cap and wick. Metal stand and pan. Aileen and John Ellison Collection.cresalo, lamp, vaporizing

Tom Johnson - Supply Supt. Checking controls on a vaporizer T.L.P.G. Plant - Date Unknownorganisation, industry, gas and fuel

Tom Johnson Inspecting Foundations for a Larger Vaporizer (T.L.P.G Plant) Required to Heat Liquid Propane to meet Winter Load for 1971-78organisation, industry, gas and fuel

The Fluotec vaporizer was made to administer only halothane (Fluothane). It was one of the first vaporizers made for use with only one anesthetic, and one of the first to use a bimetallic coil for temperature compensation.The bimetallic coil is part of the valve that controls how much of the carrier gas enters the vapor chamber to vaporize the anesthetic.Modern vaporisers still use this bimetallic coil technology today. Serial No: 5040 Patent No: 814427 A ready reference “calibration card” came attached to these vaporizers. The card was printed with a scale that indicated the concentration of halothane produced at different flow rates and dial settings.This item does not have a reference card with it.This Flotec vaporiser holds historic significance as a very good example of an early model piece of equipment for halothane only administration. Modern vaporisers still use the bimetallic coil technology and therefore this object has scientific and research significance.Small metal stand with 3 rubber feet, Main metal cylinder body housing the bimetallic coil. Inlet valve with a brass attachment and metal outlet valve. Metal dial that controls % Penthrane. Dial notches range from OFF to 1.5. Small silver chain hangs from the top of the dial lever. Small silver metal box held by 4 screws and a round bakelite window with FULL inscribed in white text located on the front of the main cylinder Fluothane Cyprane vaporiser. Fluotec Mark II by Pentec, with stand. Royal Children's HospitalStamped on Inlet and outlet valve: INLET OUTLET Stamped on to a plate on the front of the vaporiser: KEEP UPRIGHT / PENTHRANE / WHEN CHARGEDinhaler, fluotec mark ii

vaporizing kerosene gas lamps of this type were used by track gangers to facilitate night works. Historic - Victorian Railways - Permanent Way and Works - track equipment - Ganger's Lamp made of metal, brass and glass V.R ( and Arrow symbol ) AL 14puffing billy, victorian railways, ganger's lamp

Metal gold retort, it has a two parts circular container attached to crook shaped long handle. A caption reads Mr. G. Humphrey. An amalgam (gold and mercury) is placed inside and fire built around outside. Mercury vaporizes away leaving the gold. Diameter of retort 23 cm. Overall size 37x75 cm.mining, equipment, retort

Atomiser tube and attachment head for a perfume bottle. Atomizers, which vaporised liquid into fine droplets using air, were first used in the medical field around c. 1859. By the late 1870s, French perfume makers were using vaporizers to scent the air in their sales booths.This item is part of a collection that represent the urban development occurring in the Warrnambool.Container brass for perfume bottle. Ribbed cylinder with screw lid. Blue and white stones inlaid on top. warrnambool, shipwrecked-coast, flagstaff-hill-maritime-museum, shipwreck-coast, brass container, perfume bottle, perfume

The original Primus stove was designed to be "soot-free" by vaporizing kerosene before ignition, a process requiring a precisely drilled, small-aperture jet nipple. Early jet parts were made of brass, designed for longevity and maintenance by the user. In 1962 Optimus bought the Primus brand name for liquid fueled stoves. Together with the brand name they also got spare parts and partly finished stoves. Bahco retained the Primus brand name for liquid gas products.A small lidded plastic container with Primus Jet parts, 9 washers, 11 jet nipples, 2 tiny open cylinders and 1 tiny screw. The lidded plastic box has a cardboard insert with details about an automotive Joseph Lucas Contact Set of points which are not contained in this box. The plastic box lid has a "King of the Road" lion emblem at the top and 'Made in Australia' stamped at the bottom. Handwritten on the lid and base of the box in black texta is 'Primus Jets'. The cardboard in the bottom of the plastic box says 'This Contact Set is treated with a preservative. IT IS ESSENTIAL that the POINTS are wiped clean before fitting. JOSEPH LUCAS (AUST.) PTY. LTD.'camping equipment, recreational equipment, cooking stoves, cooking equipment, kerosene cooking stoves

The Epstein, Macintosh, Oxford vaporizer (EMO) was designed in 1952 by Dr H. G. Epstein and Sir Robert Macintosh of the Nuffield Department of Anaesthetics at the University of Oxford, with the aid of their technician, Mr Richard Salt. It was essentially a refinement of their earlier Oxford vaporizer and designed specifically to deliver ether in known concentrations, irrespective of the temperature of the ether. Robert Macintosh was born at Timaru New Zealand in 1897. In December 1915 he travelled to Britain and was commissioned in the Royal Scots Fusiliers, soon transferring to the Royal Flying Corps. He was shot down behind enemy lines on 26 May 1917 and taken prisoner, escaping several times. When the war ended he returned to medical school and qualified in 1924 as MRCS LRCP. Macintosh's initial intention was to be a surgeon, but soon after qualifying he developed an interest in the field of anaesthesia. Macintosh became the first professor of anaesthetics at Oxford although the university was at first against the appointment. He recruited the scientists Dr Kurt Mendelssohn and Dr H G Epstein and together they designed and built the Oxford vaporiser, a simple, portable, and accurate means of delivering varying concentrations of ether which was to see service in the second world war. He was knighted in 1955 and died at Oxford in 1989.The apparatus is a round, barrel style object with three small rubber feet and a moulded handle over the top. It consists of a vaporising chamber, wick, ether level indicator, temperature compensating value, air bypass chamber and mixing chamber. Manufacturer's label on reverse: EMO, Longworth Scientific Inst. Co. Ltd. England. Serial No. 5878macintosh, epstein, oxford, vaporiser, nuffield, ether

Recognising that warmed ether was less irritating to the airway and patients receiving it were less likely to experience shock, Francis Shipway developed the Shipway's apparatus which was used during World War 1 and continued to be used through to World War 2. Reduction of shock for patients who had experienced trauma was crucial to their later recovery, particularly during war times. This example of the Shipway's apparatus also has the facility for administering chloroform.A triangular metal stand with two glass jars sitting in a metal tub and a green metal jar that looks like a thermos, also sitting in a metal tub. A metal pole has been screwed into the centre point of the stand, with a circular top to act as a handle. One of the jars has a rubber stopper in the neck with metal tubing attached to the stopper. The other glass jar has a metal screw top with a dropper spout. The two glass jars are connected via red rubber tubing. The apparatus has been sectioned in parts to show the inner mechanisms.Typed in black ink on white paper and adhered to metal bath: SHIPWAY'S APPARATUS •Typed in black ink on white paper and adhered to metal bath: ETHER VAPORISER •Typed in black ink on white paper and adhered to metal bath: THERMOS WITH HOT WATER •Typed in black ink on white paper and adhered to glass bottle: CHLOROFORM VAPORIZER •Typed in black ink on white paper and adhered to metal connector: TO AIR BELLOWS •Typed in black ink on white paper and adhered to tube in thermos: DELIVERY TUBE •Moulded into base of thermos: THERMOSshipway, world war i, warmed ether, endotracheal, chloroform

A blowtorch is a fuel-burning tool used for applying flame and heat to various applications, usually metalworking. Early blowlamps used liquid fuel, carried in a refillable reservoir attached to the lamp. Modern blowtorches are mostly gas-fuelled. Their fuel reservoir is disposable or refillable by exchange. The term "blowlamp" usually refers to liquid-fuelled torches still used in the UK. Liquid-fuelled torches are pressurized by a piston hand pump, while gas torches are self-pressurized by the fuel evaporation. In 1882, a new vaporizing technique was developed by C. R. Nyberg in Sweden, and the year after, the production of the Nyberg blow lamp started. It was quickly copied or licensed by many other manufacturers. The US blowlamp was independently developed with a distinctive flared base and was fuelled by gasoline, whereas the European versions used kerosene for safety and low cost.The family of Mr Howcroft were early settlers in Moorabbin ShireA brass blow-torch B.A. HJOP Co. STOCKHOLM SWEDENblowtorch, stockholm sweden, welding, moorabbin, cheltenham, bentleigh, early settlers

A blowtorch or blowlamp is a fuel-burning tool used for applying flame and heat to various applications, usually metalworking. Early blowlamps used liquid fuel, carried in a refillable reservoir attached to the lamp. Modern blowtorches are mostly gas-fuelled. The blowlamp is of ancient origin and was used as a tool by gold and silversmiths. They began literally as a "blown lamp", a wick oil lamp with a mouth-blown tube alongside the flame. This type of lamp, with spirit fuel, continued to be in use for such small tasks into the late 20th century. In 1882, a new vaporizing technique was developed by Carl Richard Nyberg in Sweden, and the year after, the production of the Nyberg blow lamp started. It was quickly copied or licensed by many other manufacturers. Carl Richard Nyberg (May 28, 1858, – 1939) was the founder of Max Sievert’s Lödlampfabrik, then one of the largest industries in Sundbyberg, Sweden. After school he started working for a jeweller and later he moved to Stockholm and worked with various metalworks. 1882 and set up a workshop at Luntmakargatan in Stockholm making blowtorches. However the business didn't work well because it took too long to both manufacture and sell them. In 1886 he met Max Sievert (1849 - 1913) at a country fair and Sievert became interested in Nyberg's blowtorch and started selling it. In 1922 the company was sold to Max Sievert who continued to own it until 1964 when it was bought by Esso. The blowtorch is commonly used where a diffuse high temperature naked flame heat is required but not so hot as to cause combustion or welding: soldering, brazing, softening paint for removal, melting roof tar, or pre-heating large castings before welding such as for repairing. It is also common for use in weed control by controlled burn methods, melting snow and ice from pavements and driveways in cold climate areas, road repair crews may use a blowtorch to heat asphalt or bitumen for repairing cracks in preventive maintenance. It is also used in cooking; one common use is for the creation of the layer of hard caramelised sugar in a crème brûlée. A brass blowtorch, 'Sievert' with a wooden handleSIEVERTtools, blow torches, blow lamps, welding, brazing, jewellery, cookery, soldering, nyberg carl, sievert max, stockholm, sweden, spirit fuel, kerosene, gas fuel, moorabbin, bentleigh, cheltenham, market gardeners, pioneers, early settlers, plumbing, carpenters,

This vaporiser has a main cylindrical body with a step up to the dial plate with a small red latch to lock dial in to place.On the front of the body sits a square gauge to indicate the level FULL along with a long rectangular shape.There is an Inlet and outlet valve that sits behind the metal dial.There is a manufacturers plate sitting on top of the dial and the inlet/outlet valve. Inscribed on top plate: KEEP UPRIGHT/ PENTEC 2/ WHEN CHARGED •Inscribed on inlet & oulet valve plate: PENTEC 2/ SERIAL NO 252939/ PATENTS PENDING •MADE IN / ENGLAND BY/ CYPRANE LTD / KEIGHLEY •Metal dial has inscribed: OFF/.2 .5 1 1.5 2 Max •Inscribed on front plate in green writing: USE ONLY/ PENTHRANE/ (METHOXYFLURANE)penthrane, vaporizer, anaesthesia, anaesthetic machine

Irregular cylindrical grey inhaler that has been sectioned for teaching purposes. The centre dial is labelled "E.M.O. ETHER INHALER", and controls for the percentage volume of ether released, from "close for transport" to 20%. The sectioned areas of the apparatus have been painted yellow and expose the vaporising chamber, wick, ether level indicator, temperature compensating valve, air bypass chamber and mixing chamber. anaesthesia, vaporizer, vaporiser, sectioned, inhaler