The vent cover comes from the Falls of Halladale, a four-masted iron-hulled barque built in 1886 for the long-distance bulk carrier trade. The vessel was built for the Falls Line (Wright, Breakenridge & Co., Glasgow, Scotland) at the shipyard of Russell & Co., Greenock on the River Clyde, she was named after a waterfall on the Halladale River in the Caithness district of Scotland. The ship's design was advanced for her time, incorporating features that improved crew safety and efficiency such as elevated bridges to allow the crew to move between forward and aft in relative safety during heavy seas. The Falls of Halladale was the seventh vessel in a series of eight similar iron-hulled sailing ships, all built by Russell & Co and all named after waterfalls in Scotland. The Falls of Halladale was preceded by the Falls of Clyde (1878), the Falls of Bruar (1879), the Falls of Dee (1882), the Falls of Afton (1882), the Falls of Foyers (1883) and the Falls of Earn (1884). The Falls of Halladale was followed by a sister ship, the Falls of Garry (1886). The Falls of Clyde is afloat today and is a major attraction at the Hawaii Maritime Center in Honolulu. The Falls of Halladale is best known for her spectacular demise in a shipwreck near Peterborough, Victoria on the shipwreck coast of Victoria, Australia. On the night of 14 November 1908, she was sailed in dense fog directly onto the rocks due to a navigational error. The crew of 29 abandoned ship safely and all made it ashore by boat, leaving the ship foundering with her sails set. For weeks after the wreck, large crowds gathered to view the ship as she gradually broke up and then sank in the shallow water. Soon after the accident the ship's master, Capt. David Wood Thomson was brought before a Court of Marine Inquiry in Melbourne and found guilty of a gross act of misconduct, having carelessly navigated the ship, having neglected to take proper soundings, and having failed to place the ship on a port tack before it became too late to avoid the shipwreck. Capt. Thomson's punishment included a small fine and he had his Certificate of Competency as a Master suspended for six months. Today the Falls of Halladale is a popular destination for recreational divers. The wreck is easily accessible by scuba divers about 300 m offshore in 3 to 15 m of water. The hull lies on its collapsed starboard side. Some of the original cargo of 56,763 roof slates remains at the wreck's site along with corroded masses of what used to be coils of barbed wire. Twenty-two thousand slates were salvaged in the 1980s and used to provide roofing at the Flagstaff Hill Maritime Village in Warrnambool. An anchor that was recovered in 1974 is on display in the village. The pulley sheave is significant as a salvaged item from the Victorian heritage-listed Falls of Halladale wreck. As an artifact from the wrecked ship, it helps us to remember today the story of the wrecking and is an important reminder of a marine incident in Victoria's maritime history. Vent cover taken from the top of an iron Bollard. Recovered from the wreck of the Falls of Halladale. noneflagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, vent cover, falls of halladale, russell & co.

Part of the Reverend Chaplain Major Thomas Bruce Williams, No 556101, Collection.Green full length nylon raincoat with button-up front and adjustable belt with buckle. Mesh vent covered with a flap on the back. Under each arm are four small vent holes. Sewn onto the inside neck is a manufacturer's label. Washing instructions label sewn on inside right. Two side pockets.Printed in black ink on manufacturer's label: 'M. PENNISI CLOTHING CO. PTY. LTD., VIC., 1977, (upwards arrow), CLASS 8405-66-018-1271' Handwritten in black ink on manufacturer's label: 'PADRE TOM B. WILLIAMS'.army chaplain, clothing, uniform, major thomas b. williams

Part of the "Kevin John Herdman" ,397661 Collection. See Cat No. 5942P for details of his service.Green plastic waterproof coat with belt. Belt has a buckle for adjustment. Mesh vent across back, covered with a flap. Two vents at shoulder level on front. Front closed with buttons. Two side pockets. Manufacturer's label on inside neck. Care instructions label inside right.On Manufacturer's label: '38R, CLASS 8405, 66-018-1272, 8305-66-018-0456'.accesory, waterproof coat, australian army, kevin john herdman

Part of the "Kevin John Herdman", No. 397661 Collection. See cat No. 5942P or details of his service.Green plastic waterproof coat with belt. Belt has a buckle for adjustment. Mesh vent across back covered with a flap. Two vents at shoulder level on front. Metal vent holes under arms. Front closed with buttons. Two side pockets. Sizing label on inside neck. Manufacturers label on inside left.On sizing label: 40L, CLASS 8405, 66-018-1274, 8305-66-018-0450'. Stamped on sizing label: 'BRK, 70, 70". Handwritten on sizing label: 'K. HERDMAN'. On Manufacturer's label: 'M.PENNISI, CLOTHNG CO. PTY LTD, VICTORIA, 1970 (upwards arrow ^).accessory, waterproof coat, australian army, kevin john herdman

Used by local apiarist J Laidlaw until the 1980s.Bee smoker consisting of a metal cylinder with a hook, attached bellows, and a hinged lid enclosed in a wire cage. The lid has a spout for puffing the smoke into the hive, and a covered air vent. Fuel is placed in the cylinder and ignited. A triangular wedge-shaped bellow with wooden sides and a leather insert is attached.laidlaw, apiaries, apiarists, beehives, hive smokers, allansford

The Red Cross is a voluntary organisation that aids people in difficulty. The Pledge reads "Red Cross Pledge / We pledge ourselves as / members of Red Cross to work for / the improvement of health, the pre- / vention of disease and the mitigation / of suffering.The Red Cross is an active organisation in the Kiewa Valley.Wooden frame with plastic cover over a printed Red Cross Pledge. The print is black.There is a string at the back for hanging.red cross pledge

Arthur E. Woodley donated the WW1 Military Carbide Signal and General Purpose Lamp to Frankston RSL. It was given to Arthur E. Woodley of Crib Point during the 1960s by Captain Ivan E. Layton MBE who was then the Executive Officer of Melbourne Legacy. During WW2 Ivan Layton was secretary to General Blamey. Ivan Layton died on 15th September, 1979. The carbide workings of the lamp were removed because of corrosion, otherwise it is almost complete.WW1 Military Carbide Signal and General Purpose Lamp which is round and made of brass. The lamp has a latched and hinged brass top. Brass and wood hinged handle with knurled access knob which is situated at the top of the lamp. In between the handle uprights is a round chimney flu which allows heat to escape. Approximately one third down from the top of the lamp there is a brass side handle. Immediately to the left of the handle is a rectangular curved view port with brass cover. Directly opposite the side handle is a convex glass window. Air vents are located at the bottom of the lamp. Inside the top half of the lamp is a chamber which contains the carbide lamp and perpendicular sleeves for the insertion of coloured glass panels. The bottom half of the lamp contains the carbide.Manufacturers Stamp, 'PLAYER & MITCHELL LTD', 'SENTINEL WORKS' 'BIRMINGHAM'ww1, military, brass, lamp, world war 1, round, great war, carbide, signal lamp, player mitchell, birmingham

http://en.wikipedia.org/wiki/Horse-drawn_vehicle http://www.coyaltix.com/lamps.htmlThe candle light needed to be protected from the wind. This removeable light or lantern has 4 sides with 2 oblong bevelled glass panals, 3rd panel is plain with a heat vent and the 4th opens to light the lamp and has a 4.5 cm round red glass which would act as a reflector. The candle holder screws out to allow for a narrow candle to be inserted. It has a black ventilated cover on top and has slide fixture to attached the lamp on to the carriage. . Powerhouse Museum Collection Thesaurus Protected lamps or lanterns, fixed or removable, used on coaches or carriages. Commonly made of brass, they often were fitted with reflectors as well as red lenses to serve as tail lights (Art and Architecture Thesaurus).red and clear glass lenses light candle reflector bevelled glass horse buggy tail light

Olivine is mostly found on the Earth's surface in igneous rocks that are dark-coloured. It is common at divergent plate boundaries and at warm spots, such as volcanic areas. It crystalises and forms during the cooling of magma. Olivine is used in refractory sand, bricks, and gemstones. Olivine has been found on a number of meteorites, which might have originated from large asteroids or the mantle of a now-destroyed planet. This olivine crystal is thought to originate from Mount Noorat, with speculation that it could have originated from Mount Shadwell. Mount Noorat is a dormant volcano cone located in the Newer Volcanics Province of Victoria. Mount Noorat belongs to the Kirrae Wuurong people, who used the Mount as a place for meetings and gatherings prior to European settlement. Contact was first made between European settlers and the Indigenous people in 1841. The Mount has mostly been used for cattle and sheep grazing. Mount Shadwell is a well-known source of olivine and is the highest of a gathering of volcanic cones. The New Volcanic Province is located in South East Australia and covers 15000 square kilometres. It contains 400 explosive vents and small shield volcanoes. The last eruption is thought to have occurred 5000 years ago at Mount Gambier and Mount Schank. This olivine crystal has been identified as a volcanic bomb, which is a molten rock which was pushed out and ejected into the air when a volcano reupts. A rock needs to be larger than 65 mm in diameter to be classified as a volcanic bomb. This olivine volcanic bomb and its locality is historically and socially significant. The olivine was found in the Newer Volcanic Province, an area which contains over 400 dormant volcanoes. This olivine is one part of a volcanic bomb, which would have ejected when magma erupted out of a volcano. This specimen is part of a larger collection of geological and mineral specimens collected from around Australia (and some parts of the world) and donated to the Burke Museum between 1868-1880. A large percentage of these specimens were collected in Victoria as part of the Geological Survey of Victoria that begun in 1852 (in response to the Gold Rush) to study and map the geology of Victoria. Collecting geological specimens was an important part of mapping and understanding the scientific makeup of the earth. Many of these specimens were sent to research and collecting organisations across Australia, including the Burke Museum, to educate and encourage further study.A solid iron-magnesium silicate mineral with shades of green and brownburke museum, beechworth, geological, geological specimen, olivine, igneous rock, volcanic, gemstones, volcanic bomb, meteorites, asteroids, plantes, mount noorat, mount shadwell, indigenous, kirrae wuurong people, newer volcanics province, victoria, european settlement, eruption

The cap was found in 2017 during a clear up. It May have been donated or possibly left behind by a cadet who stayed at the Mission in the 20th C. The Mission was host to both Officers and Cadets during much of the 20th C.An example of trainee cadet clothing produced in the 20th C (ID No. 8405.66.075.6069).Stiffened size 17 white nylon-covered cap with air-vents and leather and black felt headband, with navy-blue woollen chin strap; lined with fabric and calico and stitched and printed nylon label.Combination of printing and hand-written; see image attached. Hand-printing "Reynold/ATC" (which possibly stands for Australian Trainee Cadet).sailor cadet, ran, trainee cadet, royal australian navy, agcf, reynold

Used in WW2. Basically of german origin and manufacture but 'English' handset suggests capture and use by Australian forces possibly in Middle East Desert warfare.Black Rectangular Metal Box with Lid. Total Height 215mm (with lid closed), Body Height 140mm. Lid Height 75mm.Lid attached by full length Hinge on rear and locking Clip at front.Depth 90mm. Length 275mm. Lid Outside: has overlapping lip to body when closed.Reinforcing metal attachment on left side rolls over to inside of lid and is attached by two screws. Front locking clip is spring loaded and attached to lid by 3 screws. Lid Inside: Flexible metal plate to clip on handset. 2 inscription plates on left and right ends and telephone handset described separately Body Outside:Front: 2 Jack plug points, vertically aligned 85mm from left, 25mm apart either side of mid point of height of bodyprotedted by protective pivot plate. Air vent plate attached with 2 screws adjacent to Jack plug holes (same on Back). Left side at top; metal plate for carry strap (same on right side). carry strap not with item.Right side; hole covered by protective cover plate centred 70mm from base , Wind-Up handle attached (described seoarately. Body Inside: 2/3 filled with visible metal and bakelite components in separate compartment containing unseen working parts. Left side contains morse code key in canvas bag (described separately). Contents Inside Lid. Two schematics of wiring layouts attached to left and right ends. Removable Bakelite handset clipped into postion for carrying, attached cable has 4-pronged attachment connected to main section in body. Contents Inside Body. Most working parts hidden inside metal container. White plastic button 'Pruttaste' is a test button; threaded screws on top for attachments not present.Two pieces of loose wire purpose unknown. Canvas Bag with zip, labelled DD with arrow between (Department of Defence) containing Morse Code Key; wire with large jackplug attachment connected to MC Key through the bag. Jackplug connects via front of body of object. The whole of this item is stored in left inside of body.underside of handset says PRESS KEY WHILE SPEAKING and in smaller font size TELE HD NO 2

Book of hymns, a collection of over 100 gems of sacred song compiled by J W Van Dr Venter, published by R L Allan & Son Glascow, Alfred Holness London. Burgundy coloured soft cover with gold lettering & embossed floral design. Written in ink inside front cover A.J.Pethard.J.W.Van.De.Venter.books, music, religion

This type of head dress was very commonly worn by British Commonwealth Forces in the Sub Continent and other tropical areas. This particular example would have been a common sight in Northern Australia during the time frame, as well as Africa, Middle East and the Pacific. It is a light weight ventilated helmet offering good air circulation via the vent in the top of the crown, and shade to the back of the neck. As well as protection by the peaked front for the eyes reducing glare, preventing sun and heat stroke. It also created an image of gentlemanly dress and pride in appearance. It conformed to an ideal and was considered quite fashionable and a little dashing, often worn at a jaunty angle, creating a rakish air, far from today's simplistic view of pure functionality and at as low as possible cost. Whether worn with a tropical uniform with jacket and trousers, or open necked shirt and shorts, the wearer was easily identifiable as British or one of the Commonwealth countries.WW2 RAAF Wolsley cork helmet. Helmet Khaki cotton six (6) panel outer, with three (3) fold pugaree. Colour patch on left side approximately 6cm X 5.5cm, Dark blue,2.5cm, Light blue, 0.5cm and Maroon 2.5cm. Tan leather trim around brim, tan leather chin strap. Traditional pith helmet four (4) hole domed type vent on top of crown. Beige leather sweat band pierced around the top and with a cotton cord adjustment threaded around. Fixed to shell in four points diagonally. Interior is also covered in Khaki cotton. Hand written in brown ink. A1917 F/Lt C KERR GRANTworld war two, head dress, helmet, pith, cork, cloth covered, leather trimmed, royal australian air force, officer, flight lieutenant, khaki, pith helmet, air force, tropical, hat

A typical North Vietnamese army issue helmet.Khaki green fabric covered pith helmet. Top part has 4 sections, each with a silver metal ventilation eyelet. Band separating top section from brim also has a metal eyelet. A domed metal vent at the top has 4 'arms. Inside strapping is green vinyl held in place by brown cord, and the chinstrap is brown leather with a silver metal buckle.pith helmet, vietnam, uniform, north vietnamese, helmet

A cream coloured cardboard cover. Top right corner reads Australian Air Publication 7435.031-6. Royal Australian Air Force is above their insigna and the description of the manual us under this. the manual has three punch and tow metal staples down the left hand side.royal australian airforce - manuals, vent valve heater assembly

Metal cylindrical base to store kerosene. Above this area is a cylindrical glass area for the actual lamp light. Above this is a metal cylindrical cover with perforated holes for venting fumes. A thick metal wire handle is attached to the sides of the lamp. Access to the inside of glass area is via two spring-loaded clamps on either side of the glass area.On glass: Pyrex, Aladdin, Made in Australialamp, light, lantern, kerosene

Belonged to Kathleen Marjorie Dunn (nee McKenzie)Day dress in fine silky fabric. It has a blue, white and green floral pattern on a navy ground. The skirt is gathered to the waist in two places in front and has two darts at the back. The sleeves are short, set in, gathered at the shoulder and end in inverted V shapes. The bodice is shaped with two sets of gathers in front and two darts at the back. The square neck dips to a shallow point in front, fastens with six self-covered shanks behind and is edged with cream net frill (probably discoloured white). There is a side vent wiht four press studs on the left at waist level. The hem is hand sewn.Nonecostume, george evans collection

Belonged to Kathleen Marjorie Dunn (nee McKenzie)Formal day dress in black crepe. It has a round neck and short set-in sleeves. The front opens from neck to waist and has four self-covered shank buttons. The bodice is slightly gathered at two points front and back. The skirt is gathered centre front with seven rows of shirring. The bodice features six arabesques in black and white beads. The skirt has two false pockets with similar beading. A small vent at the left waist closes with a hook and eye. The dress is machine sewn with a hand sewn turn-up on the hem.Nonecostume, george evans collection

Sixteen page booklet. On front cover: Bendigo Mining NL, Community and Environment Report, 2003'. Image of gecko on piece of wood on front cover. Contents include Managing Director's message, our project, community, environmental performance, Carshalton, New Moon, Woodvale, vent shaft and decline tunnel, economic value, verification. bendigo mining n.l., 2003, annual report, community, environmental performance, carshalton, new moon, woodvale, vent shaft and decline tunnel, economic value, verification.