Troy weight is a system of units of mass used for weighing precious metals and gemstones. The items here have no known provenance or donor.These items have no local significance and are useful for display onlyThese are six troy weights – 4 ounces, 2 ounces, I ounce, ½ ounce, ¼ ounce, ¼ ounce. They are brass and circular in shape and have ridged edges so that they fit one on top of the other. They are all slightly discoloured. The smallest ¼ ounce weight is different in shape and has a small brass knob on top.‘4 oz troy, 2 oz troy, 1 oz troy, ½ oz troy, ¼ oz troy, ¼ troy’ Old cataloguing number etched on all of the weights – ‘1499’ troy weights, warrnambool

Used c.1907-1909 at Dawsons Dam mine by Engineer James Mitchell Carlyle Bennett. On slip of paper kept with box, dated 9-7-93: "This set of Gold Weights is to go to the Linton Historical Society to match a set of Gold Scales they have in their collection. The weights were from the effects of James Mitchell Carlyle Bennett, whose photos of the Dawson Dam Pump House etc are in the Society's collection. These weights were used at the Dawsons Dam main office, when the daily gold collection was weighed, Circa 1907-09". Signed "R McD Bennett".Brown analite box with metal clasp, containing a set of gold weights and tweezers. Weights vary in size.james mitchell carlyle (lyle) bennett, dawson's dam, mining, gold weights, russell mcdonagh bennett

Hinged timber box containing 14 weights (200g, 100g, 50g, 20g, 20g, 10g, 8g, 6g, 2g, 2g, 1g, 0.5g, 0.2g, 0.2g) and a pair of tweezers. weights, measurement

Set of weights to be used with a beam balance9 weights from 1 to 50 gram plus 8 fractional pieces 0.5 down. Tweezers with bone tips. Box lined with purple velvetweights, gram, tweezers, beam balance

History of the Weights and Measures in Stawell from 1863 to 1991. The Physical Weights are on display in the MuseumLight Yellow paper cover with Victorian coat of arms and black print. with yellow tape on the spine.Victoria Coat of Arms VICTORIA The rest is undelined: A Brief History of Imperial Weights and Measures Equipment of Wimmera weights and Measures Union Donated to Stawell Historical Society Inc. by Former Shire of Stawell 26 July 1991stawell

Many Orbost babies were weighed on scales using these weights. Used in early 1930's.The early 20th century saw an emphasis in Australia on the reforming of mothering practices. There was a desire to improve infant mortality rates and produce healthy, well-adjusted citizens.Government organisations, in particular hospitals and baby clinics. encouraged mothers to measure their babies and regulate their feeding patterns. By the 1930s most mothers had been influenced to a greater or less extent by these new approaches to infant care. These weights are representative of that period.Two steel circular 10lb weights used with 106.1 scales used to weigh babies at Orbost Hospital. Gold painted. 10 lbs in relief on top of each weight.weights instruments-weighing orbost-hospital nursing

The 1907 Melbourne Cup was won by Poseidon. Horses and weights for the Caulfield Cup and Melbourne Cup.horse racing, melbourne cup, caulfield cup, weights

Troy weight is a system of units of mass that originated in 15th-century England.Assorted ounce brass apothecaries weights x 6 - 3 oz, 2 oz, 1 oz 1/2 oz. on red felt stand.weights, weighing instruments

A collection of silver and brass colour balance weights stamped variously in g,c,or cm (carat) units. . The smaller weights from 0.05 to 2 Carats are stored in small brown paper bags. The weights and a pair of silver colour tweezers are stored in a grey tin box Mass CARAT - Number of 0.05 - 14 0.1 - 5 0.2 - 10 0.5 - 17 1 - 8 2 - 5 100 g - 2 40 g - 4 20 g - 8 20 g - 3 10 g - 5MarkingsThe brown paper bags have marking of DISAL London stamped on frontweights, scientific instruments

Box of assorted weights.They range from 1/10 of a pound to 2 pounds. Made from differing metals.8 x weights of various size - 2lb (pound) to 1/10 of a poundWeight on each item "W & T AVERY LTD BIRM" on 8 oz 'GRAVE FOUNDRY Co" on 2 oztroy weight, imperial weight, grave foundry, w t avery ltd, birmingham

The green holder for the weights was hand made by cutting recesses out of a single piece of wood. The wood was painted green. Between 1960 and 1988 Australia gradually adopted the SI units (Standard International) or metric units. In 1970 the Australian parliament passed the metric conversion act, and the Australian building trades made it the standard in 1974. This information helps to date the set of weights to C. 1970s.These weights have local and social significance to indicate the weights used in many homes or small businesses in the 1970s.Set of 5 small metric weights in wooden holder. Measurements are difficult to decipher but "Gram" can be identified around the edge of some weights. Holder has been created by cutting round recesses into a block of wood.metric system, weights and measures australia

Sets of scales similar to these were very common in households throughout Australia. Between 1960 and 1988 Australia gradually adopted the SI units (Standard International) or metric units. In 1970 the Australian parliament passed the metric conversion act, and the Australian building trades made it the standard in 1974. This information helps to date the set of weights to before the1970s.Domestic scales such as these were common throughout Australian homes. They are now primarily superceded by plastic items, often electronic. Metal table scales with imperial weights weights and measures australia, table scales, domestic appliances

The set of seven imperial weights were used in the Post Office in Wodonga. The first Post Office in Wodonga opened on the 6th June 1856, and a second Post Office was built in 1874 on the corner of Sydney Road which became High St. and South St. In 1878 there were three staff at the Wodonga Post Office, including the Postmaster/Telegraph Manager and two Office-Keepers/Messengers. The mail service in 1878 included delivery four times a day from the Railway Station to the Post Office in Wodonga, and to and from the Wodonga Post Office to Albury twice a day.The set of seven imperial weights has local and state significance as it was used in the Wodonga Post Office in North East Victoria before decimal currency was introduced in Australia in 1966. The weights also have national significance as examples of the equipment used in post offices in Australia pre 1966.Set of seven cast iron and lead weights with imperial measurements '4 oz, 8oz, 1 lb, 2 lb, 3 lb, 4 lb, and 7 lb' The exterior circular black painted cast iron encases the heavy inner grey lead component, which is visible from the underside. "4 oz.", "8 / oz.", 1 lb.", "1 lb.", "2 lb.", "3 lb.", 4 lb.", MERCURY / 7 LB." on the top of the weights in raised numbers and letters.wodonga post office, post office, victoria post offices, wodonga, north eastern victoria post offices, victorian mail service

Set of 6 cast iron, Imperial and Decimal measurement weights. weights

The nested cup weights were designed to make the transport of weights, essential items in most commercial transactions, more convenient. This idea goes back to Roman times. In the nested cup form, a series of weights shaped into cups are set one into the other. Each cup fits precisely into the next, larger sized cup which each larger example weighing exactly twice that of the one previous. The Troy weight system was used for precious metals and gemstones.7 x Brass troy measures of various sizes. Fine groove lines near top edge and bottom 2 x Copper sliding weights - domed.1) 32 oz Troy around top .2) 16 oz Troy around top .3) VIII R around top. Maker's mark - lidded pot (coffee/tea?) with date 1826 .4) 8 oz around top .5) 6 oz Troy around top .6) 4 oz Troy .7) 2 oz Troy "WATERS" on top of sliders with "4" on under sidenested cups weights, troy weight, precious metals, gemstones, commercial transactions, sliding weights, domed weights

These weights would have been used with a Beam Balance. Forceps were to be used when moving weights from the box.Set of 17 weights in a hinged timber box.On Lid "Box No. 8. Check the weights before & after using them. Always use the forceps to handle the weights."weights, scientific instruments, grams, milligrams, beam balance weights

A small number of heavy cast iron weights and two rods remain at the Point Hicks Lightstation. These weights comprise one rod with a forked top and four circular weights attached to the bottom of the shaft. The weights and rods were part of the original clockwork mechanism that was fitted beneath the lens to keep the kerosene‐fuelled light turning. They were attached to a cable or chains and moved vertically in similar fashion to the way weights move on grandfather clocks. As the weight fell, the optic clock was driven and the lens was turned. To keep the clock turning, the weight needed to be wound back up to the top of its travel. The cables and weights in this lighthouse were visible as they moved through the length of the tower up to the lantern room. It was usual for systems to move inside a tube extending up to the top, but in this case the tower’s cast iron spiral staircase, which is supported on cantilever cast iron brackets set into the concrete wall, spiralled around the space in which they moved. Lighthouse keepers had the arduous job of having to constantly wind the clock to keep the light active, and at least two keepers needed to observe a strict roster of hours. When electric motors were invented, all of this became redundant and the motors were able to turn the optic for as long as there was power to drive them. In December 1964, the original 1890 Chance Bros kerosene‐fuelled light and clockwork mechanism were replaced by small electric motor, and the number of keepers reduced to two. The six circular weights and rods originate from the obsolete system and may have been part of a larger set. Wilsons Promontory retains seven of its original set of ten weights, all of which are detached from the tower’s weight tube. Cape Schanck has a set of fourteen weights remaining in situ as well as another four detached weights, which have inscriptions. One weight is displayed in the lantern room at Cape Otway. The image shows four of the clockwork weights attached to a rod with a forked top. They were part of the original clockwork mechanism that was fitted beneath the lens to keep the kerosene‐fuelled light turning. The Aldis lamp in its case sits on the floor next to the weights. Source: Parks Victoria.The Point Hicks weights have first level contributory significance for the insights they provide into the superseded technology and operations of a late nineteenth century lighthouse. They are well provenanced and are significant for their historic value as part of the lightstation’s Chance Brothers optical system installed in 1890. Four circular metal weights are stored on a metal rod with a forked section at the top. The weights have a cut out section which allows the weights to be removed easily.

Avery metal manual scales with measurement in grams - with adjustable chrome feet. Accompanied by an array of weights of varying brands (Mercury, MSC, unmarked) 2 x 7LB, 3 x 4LB, 1 x 3LB, 1 x 2LB, 3 x 1LB, 8OZ and 4OZ.AVERY FOR TRADE VICTORIAN PATTERN APPROVAL No. V8 To Weigh Chart MARKED BY 2 GRAM DIVISIONS MADE IN ENGLAND BY W&T AVERY LTD BIRMINGHAM No 1215 BFH/S - 680767scales, measurement, weighing, weights, artifact

Set of 6 Imperial measurement, heavy cast iron weights. 6 = 4 lb., 2 lb., 1 lb., 8 oz., 4 oz., and 2 oz.weights

A small number of heavy cast iron weights and two rods remain at the Point Hicks. The weights and rods were part of the original clockwork mechanism that was fitted beneath the lens to keep the kerosene-fuelled light turning. They were attached to a cable or chains and moved vertically in similar fashion to the way weights move on grandfather clocks. As the weight fell, the optic clock was driven and the lens was turned. To keep the clock turning, the weight needed to be wound back up to the top of its travel. The cables and weights in this lighthouse were visible as they moved through the length of the tower up to the lantern room. It was usual for systems to move inside a tube extending up to the top, but in this case the tower’s cast iron spiral staircase, which is supported on cantilever cast iron brackets set into the concrete wall, spiralled around the space in which they moved. Lighthouse keepers had the arduous job of having to constantly wind the clock to keep the light active, and at least two keepers needed to observe a strict roster of hours. When electric motors were invented, all of this became redundant and the motors were able to turn the optic for as long as there was power to drive them. In December 1964, the original 1890 Chance Bros kerosene-fuelled light and clockwork mechanism were replaced by small electric motor, and the number of keepers reduced to two. The six circular weights and rods originate from the obsolete system and may have been part of a larger set. Wilsons Promontory retains seven of its original set of ten weights, all of which are detached from the tower’s weight tube. Cape Schanck has a set of fourteen weights remaining in situ as well as another four detached weights, which have inscriptions . One weight is displayed in the lantern room at Cape Otway. The Point Hicks weights have first level contributory significance for the insights they provide into the superseded technology and operations of a late nineteenth century lighthouse. They are well provenanced and are significant for their historic value as part of the lightstation’s Chance Brothers optical system installed in 1890.PHLS0005.1 Round cast iron weight with flat base used for lens clock-work mechanism attached to a bent metal rod. PHLS0005.2 Removable round cast iron weight with flat base used for lens clock-work mechanism stored above the other weight.

A cast iron weight, associated with the "Beehive Sock Knitter."A cast iron weight, associated with the "Beehive Sock Knitter."knitting textile machinery machine knitting, hosiery, knitting, textile machinery, machine knitting

A four piece set of cast iron weights, associated with the "Beehive Sock Knitter."A four piece set of cast iron weights, associated with the "Beehive Sock Knitter." A four piece set of cast iron weights, associated with the "Beehive Sock Knitter."knitting textile machinery machine knitting, hosiery, knitting, textile machinery, machine knitting

Weights & Measures, partially in wooden boxConsists of 10 parts as follows: 4 lb 1866; 8 oz 1803; 4 oz 1855; 2 lb 1866; 7 lb 1866; 1 lb 1866; Imperial Standard Gill 1826; Imperial Standard Pint; Imperial Standard Quart; Imperial Standard Half Gallon

The seven weights (0008.4 and 0136.3) are circular in shape with a hole in the centre and a groove cut across the radius. They were specifically designed to fit into a weight tube, which allowed movement of the weights that were used for driving the clockwork mechanism for turning the lighthouse lens. They are most likely original to the Chance Brothers system installed in 1913, which was originally equipped with a set of ten, each weighing around thirty kilograms.The weights were moved vertically in similar fashion to the way weights move on a grandfather clock. As the weight fell, the optic clock was driven and the lens was turned. To keep the clock turning, the weight needed to be wound back up to the top of its travel. Lighthouse keepers had to constantly wind the clock to keep the light active, and at least two keepers needed to observe a strict roster of hours. When electric motors were invented, weights became obsolete and the motors were able to turn the optic for as long as there was power to drive them. Wilsons Promontory’s Chance Bros. kerosene operated light, which was turned by a clockwork mechanism, was replaced by small electric motor in 1975, reducing the number of keepers and eliminating the need for weights. Cape Schanck has a set of fourteen weights remaining in situ in the lighthouse weight tube as well as another four detached weights, two of which may be associated with the 1859 mechanism. A small number of detached cast iron weights and two associated rods remain at the Point Hicks Lightstation and one weight is displayed in the lantern room at Cape Otway.The Wilson Promontory weights have first level contributory significance for the insights they provide into the technology and operations of a late nineteenth/early twentieth century lighthouse which has since been superseded. They are well provenanced and are significant for their historical value as part of the lightstation’s Chance Brothers optical system installed in 1913.Four circular disc shaped lead weights, all with a narrow section cut out to the middle of shape. (as in slice of cake)

The rectangular weight is rectangular in shape and made of concrete and metal. A closed metal hook is attached to the concrete block, which is encased in metal, and a section of rope is attached. It was used as a counter weight on a canopy that operated as part of a winch located at the [east] landing deck … Originally there were four weights that formed part of a fibreglass canopy which consisted of a staunch, pulley and a rope so when you lifted the canopy up, the weights on either side countered the weight so objects could be moved. The weights were installed in the 1970s and were dismantled along with the winch in the following decade.The weight has first level contributory significance for its provenance and historical value as a component of an earlier apparatus that was used for hoisting goods at the lightstation sea landing.2 x Rectangular shaped weight with with closed hook embedded in concrete surrounded by metal. A section of rope is attached to the hook.