non-fictionA62 Inner Wheel District History 1995 - 2015inner wheel club of pakenham, pakenham (vic.)

Part of the Zakrzewski Collection of spinning wheels donated to the National Wool Museum by Mr Wlodzimierz Zakrzewski. For many years, Mr Zakrzewski collected, researched and repaired spinning wheels from all over the world. This wheel is known as a Carrington wheel. It was designed and built by Mr Zakrzewski who made 400 similar wheels of three different designs over a 30 year period. The design was named for his wife, Sonya Carrington who was a Polish artist and teacher who became a well known tapestry weaver. She married Mr Zakrzewski in 1956 and continued to exhibit under her own name. As it was difficult in the 1950s to obtain tapestry wools she decided to spin and dye her own. She didn't have a spinning wheel, so Mr Zakrzewski, whose training was in engineering, offered to make her one. They became very popular and he continued to make and sell them.Part of the Zakrzewski Spinning Wheel collection.handicrafts - history, spinning wheels, carrington wheel, highlights of the national wool museum: the zakrzewski spinning wheel collection - exhibition (28/07/2001 - 02/12/2001), zakrzewski, mr wlodzimierz carrington-zakrzewska, mrs sonya

A digital copy of a colour tinted postcard of the water wheel that powered the Barton's Store in Marysville in Victoria.A digital copy of a colour tinted postcard of the water wheel that powered the Barton's Store in Marysville in Victoria. This water wheel was located on the Steavenson River in Marysville. Barton's Store was established by Thomas John Barton in 1864. Thomas John Barton was born in 1836 in Gloucestershire and after his father died in 1850 arrived in Melbourne in 1852 along with his mother, adult sisters, younger brothers, his uncle, his uncle's wife Suzanna and their family. Thomas tried gold mining at Woods Point but found it too difficult. He then partnered with Ewen Hugh Cameron to provide the miners with meat. In 1864 they purchased a plot of land in Marysville and set up a butchers/abattoirs and from there began their business of taking supplies to the miners at the nearby Woods Point and Jamieson goldfields. In 1865 the business was firmly established and Thomas married Selina Croker at Heidelberg and brought her back to Marysville. Their first home was 'The Chestnuts', which included the store, and was situated on the town side next to the Steavenson River. Sadly, in 1876 Selina died of complications after giving birth to their sixth child. Thomas was in need of a nanny to care for his six children, including the newborn baby, and so he employed Emily Ada Sparke, who is the eldest daughter of the local school teacher. Thomas and Emily subsequently marry in 1878 and they go on to have a further 10 children over the next several years. Thomas assisted in the establishment of the first school in Marysville in 1870 and remained a very active member of the community including as a Councillor for the Shire of Healesville, Shire President and he was also appointed as a Justice of the Peace. Thomas died in Carlton in 1911. After their father's death, his sons Fred and Frank took over the family business, which was then known as Barton Bros Store which continued to operate until sometime in the 1970's. This postcard was produced by Murray Views in 1950 as a souvenir of Marysville.marysville, victoria, barton's store, thomas john barton, ewen hugh cameron, woods point, jamieson, gold mining, goldfields, selina croker, the chestnuts, emily ada sparke, shire of healesville, fred barton, frank barton, barton bros store, francis adam barton, frederick john barton, water wheel, steavenson river, murray views, murray views no. 51, postcard, souvenir

Part of the Zakrzewski Collection of spinning wheels donated to the National Wool Museum by Mr Wlodzimierz Zakrzewski. For many years, Mr Zakrzewski collected, researched and repaired spinning wheels from all over the world. This spinning wheel is known a Charka spinning wheel and is from India. Spinning wheels like this became widely known through their connection with Mahatma Gandhi and are often referred to as Gandhi wheels. Gandhi encouraged people to spin whenever they had the opportunity. He especially advocated their use to India's poor as a means to achieve self-sufficiency and thus combat the growing poverty rate in India after the departure of the British.Charka or Gandhi spinning wheel. Part of the Zakrzewski Collection of hand spinning wheels from around the world. handicrafts - history, spinning wheels, highlights of the national wool museum: the zakrzewski spinning wheel collection - exhibition (28/07/2001 - 02/12/2001), zakrzewski, mr wlodzimierz

Instruction - 4 pages - duplicated foolscap sheets - headed "MMTB Engineering Department - Workshops and Running Shed Branch" - titled "Wheel Grinders Runningsheds and Wheel Grinder Procedure" Details duties of workmen who undertook wheel grinding, training, procedures, preparation, procedure, cutting out of motors, wheel gauges, flanges and notes procedures for trams 750, 751 and 980. Dated May 1970.trams, tramways, depot, safety, workshops, pitmen, instructions, procedures, wheels

This feed wheel is part of the drill press catalogued as No. 2030.A cast iron wheel ( a feed wheel) with three spokes (one has been broken off). It has a screw nut for fastening to the shaft of a workshop drill (cat. no. 2030).BUFFALO FORGE Co. BUFFALO N.Y.drill machinery engineering cast iron

De Soza park was developed as a public amenity from the early 1980s. The poppet head and Chilean wheel sculpture are representative of the gold mining origins of the town.The park, located centrally in Buninyong is of social and historic significance.Original B/W photograph of streetscape of De Soza park frontage to Warrenheip St., Buninyong, with poppet head, rotunda and Chilean Wheel sculpture, former post office in background. Large eucalypt tree present behind rotunda, large cypress tree to north of park.buninyong, de soza, park, rotunda, poppet head, sculpture, chilean wheel, post office, warrenheip st, streetscape

Wheel metal small part of pulley assembly.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wheel, pulley wheel

Spinning wheelGold coloured metal plaque with the inscriptionslovenian, spinning wheel, 1896

Work being completed on the tiling and kerb at the Clock Tower and Rotary Wheel garden showing workmen tiling, view looking towards newly installed palm trees, car park and boat harbour 1993 Lakes Entrance Victoria. Black and white photograph showing work being completed on the tiling and kerb at the Clock Tower and Rotary Wheel garden showing workmen tiling, view looking towards newly installed palm trees, car park and boat harbour Lakes Entrance Victoria. Also another black and white photograph of same area looking towards Post Office and IGA Supermarket 04259.1 size 9 x 12.5boats and boating, jetties, waterways, civil engineering

These wheels were fitted to the B-24 LiberatorMetal wheel hub and leg minus tyre.

Black and white photo of Spinning Wheel in Museummuseum

Ink on paper technical drawing: Worn and Worm Wheel technical drawing, w e edsall, worm and worm wheel

Colour photograph of the ferris wheel known as Melbourne Star.melbourne star, ferris wheel, melbourne

.1 - Book - 20 pages + light grey cover, issued by the British Engineering Standards Association, British Standard Specification for "Cast Steel Wheel Centres for Electric Tramcars". Dated April 1922. Has standard Number 150-1922. Provides materials specification, testing and an index. .2 - Book - 16 pages + light grey cover, issued by the British Engineering Standards Association, British Standard Specification for "Wrought Iron Wheel Centres for Electric Tramcars". Dated April 1922. Has standard Number 149-1922. Provides materials specification, testing and an index. Both copies has the stamp of the "Tait Book Co. 90 William St. Melbourne" on the lower edge and in the top right corner, the ESCo Ballarat company stamp and the date "14 September 1923". trams, tramways, tramways, electrical equipment, wheels

Belltower Pottery was set up by Rudolf Dybka in Kyabram, Victoria, in around 1977 with the help of John Stroomer. Stroomer later took over the pottery, employing as many as 23 workers and apprentices. After a fire in 1988 destroyed the building, Stroomer moved the pottery to the old Kyabram butter factory, where it operated until the late 1990s. Works may be marked with an impressed 'Belltower Pottery' or, after the move to Kyabram, 'Belltower Pottery, Handmade, Kyabram, Vic.'Wheel thrown stoneware bowl with the word 'Nuts' on one side. pottery, belltower pottery, rudolf dybka, john stroomer

Jan Feder studied Ceramics at the Gippsland Centre for Art and Design. After her untimely death the staff and students created a memorial ceramics collection in her honour. Black and white photographic portrait of Jan sitting at a pottery wheel throwing a pot.jan feder, jan feder memorial ceramics collection, jan lorraine feder, alumni

THE WHEEL OF HMAS SYDNEY COMMEMORATING AUSTRALIA’S FIRST NAVAL ENGAGEMENT The historic wheel of HMAS Sydney commemorates the Royal Australian Navy’s first ship- to- ship naval engagement. It was purchased early in 1930 and later presented to the Royal St Kilda Yacht Club (now Royal Melbourne Yacht Squadron) by then Commodore Joe White, following HMAS Sydney being broken up at Cockatoo Dock, Sydney. On 1 November 1914, led by the flagship SS Orvieto, a large convoy of 28 Australian and 10 New Zealand transports escorted by the Light Cruisers HMAS Melbourne, HMAS Sydney, HMS Minotaur and the Japanese ship Ibuki, departed King George Sound, Albany Western Australia with a large contingent of Australian and New Zealand troops bound for Egypt, to become the original Anzac’s. As the convoy steamed northwest across the Indian Ocean, leaving Cocos-Keeling Islands well to the westward, Captain Karl von Muller in the German Light Cruiser Emden of 3,600 tons, after having wrought much havoc to allied shipping in the Indian Ocean, ignorant of the convoys presence, had in mind to destroy the Cocos Island Cable Station on Direction Island. In the early hours of the morning of Monday the 9 November, he anchored “Emden” off Direction Island to send a landing party ashore, In the meantime the Cable Station had sent out a Morse Code message ‘Strange ship approaching’, this was followed soon after by a ‘S.O.S.’ These messages were picked up by ships in the convoy and at 7.00 a.m., Captain J.C. Glossop of the 5,400 ton HMAS Sydney was directed to leave the convoy and proceed at full speed for Cocos Islands. Two hours later Cocos Island was on the horizon. Captain von Muller, with the boarding party ashore to destroy the Cable station, steamed out to intercept the intruder. Captain Glossop decided to close in to 9,500 yards ( 8686.8m) before delivering his first salvo. Emden on the other hand, opened fire at 10,500 yards (9601m), its ten, 4.1 inch (104mm) guns firing 38 pound (17.24 kg ) shells, some of which scored near misses. Emden was hit repeatedly by HMAS Sydney’s eight, 6 inch (152.4mm) guns firing 100 pound (45.36kg ) shells. Within two hours Captain von Muller had decided to run the badly damaged Emden aground on North Keeling Island. Captain Glossop then broke off the engagement to speed off to intercept Emden’s collier, “Buresk”, seen lurking in the distance, soon to overtake her. A boarding party from HMAS Sydney was too late to prevent Buresk from being scuttled but able to rescue her crew. Returning to finish off Emden, HMAS Sydney was again met by heavy gunfire. Sydney scored a number of direct hits to Emden and only after having suffered 134 killed and 65 wounded, did Captain von Muller finally decide to lower his Naval Ensign. He was among those captured and was allowed to retain his Naval sword. In the engagements HMAS Sydney only suffered four direct hits, 4 killed and 12 wounded. J.H.(Bert) Ferris Extremely significant as part of Australia's Naval and Military history.Ships wheel, timber, mounted on a timber plinth, wheel of ship first HMAS Sydney.Plaque notifying that wheel donated by Commodore Joe White 1930ww1, sydney, german, hmas, raider, emden, cocos keeling, islands, hmas sydney, wheel

The map wheel is a simple, fast and accurate way to measure distances on maps, whether in straight lines or along curves. Hold the device from the tip and trace with the small wheel at the bottom along the line to be measured Measures distances in miles, kilometres or nautical miles depending on the scale on the side.Two metal map measuring wheel sMap scales on each side of wheelforests commission victoria (fcv), surveying, mapping

Frank Wright was a renown resident of Smeaton, where he was born. He lived at Laura Villa, and attended Smeaton State School. His father William was a gold miner and his mother's name was Sarah. Their family won many singing and instrumental awards. Frank was tutored by Percy Code and was awarded a gold medal for the highest marks in the ALCM examinations in the British Colonies at the age of seventeen years. He became the Australian Open Cornet Champion by the age of eighteen. A year later, Frank conducted the City of Ballarat Band, and later the Ballarat Soldiers’ Memorial Band. He formed the Frank Wright Frisco Band and Frank Wright and his Coliseum Orchestra. These bands won many South Street awards, and Frank as conductor won many awards in the Australian Band Championship contest. In 1933 Frank Wright sailed to England to conduct the famous St Hilda’s Band and was later appointed Musical Director of the London County Council, where he organized many amazing concerts in parks, in and around the London district. He was made Professor of Brass and Military Band Scoring and conducted at the Guildhall of Music and Drama. Frank was often invited to adjudicate Brass Band Championships around Europe, in Australia, including South Street and in New Zealand. The Frank Wright Medal at the Royal South Street competition is awarded to an individual recognized as making an outstanding contribution to brass music in Australia.A black and white photo of a man in a suit, cap and bow tie leaning on a ship's wheel. The man is Frank Wright.frank wright

These clamps were invented by Egil E Hyggen in 1968, for which he was awarded a major design prize in Norway. According to the company which manufactured them, Christiana Spigerverk, they ended production in the mid 1980s but were available in many countries for much longer.This item is significant because it shows how snow driving safety has evolved over time.A set of Norwegian manufactured wheel clamps for safe driving in snow and icy conditions. They are displayed with a poster explaining application.wheel clamps, snow driving safety, snow grips, snow chains and safety 1970s

Chilean Mill and Wheelstawell

set of 9 pencil on paper student's technical drawings .1 - .2) Boom gate .3 - .9) Potters wheelmechanical engineering, technical drawing, peter ian kilpatrick

Ivan Haustorfer was a student of Civil Engineering at the Ballarat Institute of Advanced Education when he completed this drawing. 3 pencil on paper student's tecnical drawings .1) 'R.C. Tank' .2) 'Drainage inlet' .3) 'Dethridge wheel' civil engineering, technical drawing, ivan haustorfer, ballarat institute of advanced education, alumni

Vergers Family in 2 wheel horse cartPhoto is named 14880027.jpg on CD

News paper clipping from The Age, 15 June 1985, titled "You're right, this tram has a flat wheel!", written by Tony Harrington, transport reporter about the problem of wheel flats or square wheels. Quotes the Union Secretary Jim Harper and the MTA who blamed the Union over a dispute the previous year and a backlog.trams, tramways, wheels, tramcars, maintenance, unions, mta

Black and white Ceramics with three photography students at a pottery wheel in the Ballarat School of Mines M.B. John Building. The student in the centre is John McLaughlin.ceramics, pottery, ballarat school of mines, pottery wheel, john mclaughlin

FALLS CREEK ROPE TOWS Toni St Elmo brought back plans for a Hamilton rope tow from New Zealand. He had a rope tow built in the summer of 1950-51 and it went into operation the following winter. Skiers were charged 10/- per day to use it. Skiers held onto the rope with a locking device called a ‘nutcracker” attached to a webbing belt. This tow, known as the Nissen Tow, continued to operate until 1960. Bob Hymans installed a shorter portable rope tow for his guests at Skyline from 1954. Other tows included the Village Tow and the Nursery Tow. Eventually most of the tows were taken over by Alpine Developments. From 1960 onwards they were gradually replaced by T-bars and then later on by chairlifts. This belt is from the original rope tow used between 1951 and 1960 in the Falls Creek ski lifts. These items are significant because were part of the earliest rope tows constructed at Falls Creek.A canvas waist belt with leg hoops and metal joining and hook used to attach skier to the rope tow. The wheel is also a damaged component of the Rope Tow.falls creek, nissen alpine club, rope tows, toni st elmo

A black and white photograph of the water wheel which provided power to the Barton Bros Store in Marysville in Victoria.A black and white photograph of the water wheel which provided power to the Barton Bros Store in Marysville in Victoria. This water wheel was located on the Steavenson River in Marysville. Barton's Store was established by Thomas John Barton in 1864. Thomas John Barton was born in 1836 in Gloucestershire and after his father died in 1850 arrived in Melbourne in 1852 along with his mother, adult sisters, younger brothers, his uncle, his uncle's wife Suzanna and their family. Thomas tried gold mining at Woods Point but found it too difficult. He then partnered with Ewen Hugh Cameron to provide the miners with meat. In 1864 they purchased a plot of land in Marysville and set up a butchers/abattoirs and from there began their business of taking supplies to the miners at the nearby Woods Point and Jamieson goldfields. In 1865 the business was firmly established and Thomas married Selina Croker at Heidelberg and brought her back to Marysville. Their first home was 'The Chestnuts', which included the store, and was situated on the town side next to the Steavenson River. Sadly, in 1876 Selina died of complications after giving birth to their sixth child. Thomas was in need of a nanny to care for his six children, including the newborn baby, and so he employed Emily Ada Sparke, who is the eldest daughter of the local school teacher. Thomas and Emily subsequently marry in 1878 and they go on to have a further 10 children over the next several years. Thomas assisted in the establishment of the first school in Marysville in 1870 and remained a very active member of the community including as a Councillor for the Shire of Healesville, Shire President and he was also appointed as a Justice of the Peace. Thomas died in Carlton in 1911. After their father's death, his sons Fred and Frank took over the family business, which was then known as Barton Bros Store which continued to operate until sometime in the 1970's.WATER WHEEL./ MARYSVILLE '53marysville, victoria, barton's store, thomas john barton, ewen hugh cameron, woods point, jamieson, gold mining, goldfields, selina croker, the chestnuts, emily ada sparke, shire of healesville, fred barton, frank barton, barton bros store, francis adam barton, frederick john barton, water wheel, steavenson river, photograph