The Story of S.S. "Santhia" sank while in service as a troopship, of her subsequent salvage, and of how her bell came to Bogong School. Bogong State School was built and used from the 1940s when the SECV was constructing the KHES. The school bell was unique having originated from the ship "Santhia'. Teal colored background with the title printed in white at the top and the 'Bogong State School' printed in black at the bottom. 9 pages back to back with information about the School Bell. Published in March-April, 1947Inscribed on the bell - "Presented to G. G. Jobbins, Esq., Chairman, State Electricity Commission by Captain J. P. Williams for Bogong School, on December 6th, 1946. This bell was recovered from the wreck of the S. S. Santhia sunk in the Houghly River, Calcutta, and raised by an Australian salvage party."bogong state school bell, s.e.c. magazine 1947

Colour photograph of Miss Octavia Rose Margaret Bell holding a tabby cat wearing a tartan skirt, blue skivvy and red cardigan.Ocka Bell on reversegenealogy

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. MMTB Drawing R1241 Details of Signal Bell refers. Tram 502 entered service 4/1928. Demonstrates a conductors communication or signal bell made for use on tramcars. Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, three nuts to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, four screw holes that were used to secure the bell to the roof. Has been stamped at one end on the underside "502" "1", indicating it was made or used on W2 502, No. 1 end. trams, tramways, conductors, bells, mmtb, w2 class, tram 502

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. MMTB Drawing R1241 Details of Signal Bell refers. Tram 579 entered service 9/1929.Demonstrates a conductors communication or signal bell made for use on tramcars. Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, three nuts to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, four screw holes that were used to secure the bell to the roof. Has been stamped at one end on the underside "579 2", indicating it was made or used on W2 579, No. 2 end.trams, tramways, conductors, bells, mmtb, w2 class, tram 579

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. N&C - Demonstrates a conductors communication or signal bell made for use on tramcars.Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, sheet metal domed section that is secured to the underside of the bell with one nut to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, six screw holes that were used to secure the bell to the roof. Note the difference in the casting detail between the two ends of the bell.trams, tramways, conductors, bells, mmtb

This brass bell bracket has been carefully shaped to fit around the shape of a bell. Its fitting allows it to swing freely. The bracket allows the bell to be fixed to a horizontal surface such as a s wooden frame, post or base. It may have been portable or fixed to a counter, desk or table. The bell may have been used to sound the time, to draw attention to an event such as a church surface, to signal a time to start or stop, or even as a percussion instrument.This metal bell bracket appears to be handmade and may have been used as a portable signal for a school or public meeting. It could have been used on a ship to signal the watch or the time.Bell bracket; the brass, bracket is bell-shaped with a removable hinged section across the top where the bell swung. The base is composed of a curved and shaped base stand. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, bell bracket, bell stand, bell frame, swinging bell, portable bell, bell ringing, signal

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. The actual bell and part of the striker are missing. The striker has been broken off. The "JS" indicates it was made by John Stephenson of New York who made tramway equipment and the first cable tram saloon cars for Melbourne. Demonstrates a conductors communication or signal bell made for use on tramcars.Part of a brass Conductor Communication Bell, or signal bell, consisting of cast frame, part of the bell striker and bell pull part. Has at both ends, nine screw holes that were used to secure the bell to the roof of a tram. trams, tramways, conductors, bells, john stephenson

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. Demonstrates a conductors communication or signal bell made for use on tramcars. Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, one nut and washer to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, six screw holes that were used to secure the bell to the roof and at one end the initials "TB" cast in - "Tramway Board".trams, tramways, conductors, bells, tramway board

Framed coloured photograph of a Bell 47 Sioux Helicopter and a Cessna 180A Aircraft in a jungle clearing. Mechanics are working on the helicopterArmy Rondell, Bell S/No: 637photograph, bell 47 sioux, cessna 180

Bell used by the conductor or passengers to signal to the driver - stop, proceed or an emergency stop. TB PatternDemonstrates a conductors communication or signal bell made for use on tramcars.Brass Conductor Communication Bell, or signal bell, consisting of cast frame, bell, striker, bell pull part, one nut to secure the bell to the frame and two rivets securing for the bell pull part. Has at both ends, multiple screw holes that were used to secure the bell to the roof. Has at one end the initials "TB" cast in - "Tramway Board". trams, tramways, conductors, bells, mmtb

Bells of this type were normally used to hang around the necks of cows, horses or bullocks to prevent them from being lost and were used from around the 1860's onwards. The initial J B identify the bell as being made by James Barwell who made bells for the Australian market from around the 1860's. His bell and brass foundry manufactured all sorts of bells from school bells to full church peals as well as plumbing fittings. The four marks on the edge of the bell are typical of those used by drovers or owners to identify their animal. While this bell has no known local provenance, it is a link to the early cattle and agricultural life in Australia and most likely the Western District. Its significance lies in the fact that it is typical of bells used for a purpose at that time and as such can be used for discussion in a social and interpretive context.This is a brass bell of the type used to hang around the necks of animals such as cows, horses and bullocks. The mechanism for the attachment to a collar or harness has been sheared off and the clapper is detached from the inside hook. The bell has an inscription incised around the top and there are four small cuts or incisions made into the bell at the wider end. The bell is a little tarnished.‘Success to 4 in horse teams J.B.’history of warrnambool, animal husbandry, animal bell, james barwell bells

.1) Black & white photo, copy, Air Force, BILL WEST on back. .2) Black & white photo, original, cannon in park setting. .3) Black & white, photocopy, RALPH BELL (Spinner) on back. .4) Sepia photo, original, RALPH BELL & Jean .5) Sepia photo, original, RALPH BELL, Bendigo Milk Co on back, inside sprig of flowers, Greetings to McKenzie Family from Ralph Bell. .6) Xmas / New Year card, cover: Photo of Solomons Pools. .7) Sepia, photocopy, soldier in uniform, ERNIE DOWER. .8) Black & white photo, soldier in uniform, ERNIE DOWER..1) BILL WEST on back. .3) RALPH BELL (Spinner) on back. .5) RALPH BELL, Bendigo Milk Co on back, inside sprig of flowers, Greetings to McKenzie Family from Ralph Bell.photography-photographs, military history - air force - army

This wagon is linked to Mr Stanley James Bell via his father Mr John Bell, who owned "Warrumyea" at Wangoom. It is believed that Stanley grew up and worked for his father at this property, eventuality inheriting his father's death in 1920. This wagon was likely used at Mr Stanley Bell's property “Warrumyea” at Wangoom around 1920-1940. The wagon was donated in 1984, at which time it was noted as having a brass plate inscribed "Jas", which name Stanley was known by. Also, a painted on the wage was “S J Bell Wangoom”. Remnants of the original paint colours of blue and yellow show on the photograph, which was taken at the time of cataloguing. Mr John Bell Snr from Plymouth, England, arrived in Portland, Victoria, around 1860. He had served in the British navy as a lad for a number of years. On arriving in Australia he travelled to the Wangoom district where he lived for many years. Mr J Bell worked for 20 years as herd manager at “Wangoom Park”., for Mr F Tozer (1843-1954), one of the original pioneers of the western district. He went on to pursue dairying and general farming at his property “Warrumyea” Wangoom. Bell’s son Stanley James Bell went to the Wangoom School. His first reader from this school, published in 1909, has his name inscribed in the flyleaf “Stanley J. Bell, Warrumyea, Wangoom” and is now in the collection of the Warrnambool & District Historical Society. Stanley went on working the property “Warrumyea” and eventually purchased “Wangoom Park” in 1956, where his father had been employed years before. Mr S J Bell died in 1968.The wagon is significant for its association with the farming history of Wangoom and the Warrnambool area in general. Also, the wage is significant for its association with one of the early families that settled in the Warrnambool area and their contribution to the dairying and general farming industries that sprang from their efforts. The wagon has a good provenance linking it to Mr Stanley James Bell and is also a good example of how goods were transported using horse-drawn vehicles at the beginning of the 20th century.Four-wheeled wagon or cart,12 spokes in each wheel, wooden axle with rear hub brake. Hinged and chained tailboard. Wheels have metal rims. Metal frame and wooden superstructure. Wagon has two pairs of staves. Wooden shelves, one missing with turntable. Small toolbox in front. Made by Kelly and Preston of Ballarat. Metal nameplate of the owner attached, "Jas" (S J Bell of Wangoom).. Original inscription, now obscured, was painted “Kelly and Preston Builders Ballarat”. Metal plate inscribed "Jas", and "S J Bell Wangoom". flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, wagon, sj bell, stanley james bell, wangoom park, warrumyea, first reader, john bell 1830-1920, stanley james bell 1904-1968, warrnambool pioneers, f tozer, western district, kelly and preston of ballarat

Second photograph of sign that tells story of the bell.Colour photograph of the bell tower and bell at St Nicholas Anglican Church, Lakes Entrance, Victoria.buildings, religion

Hand bells such as this one were used in schools, churches, meetings and other public gatherings to draw attention or mark time.Small brass hand bell with ebony handle. Bell has metal clapper attached by copper wire. Bell has an inscription."281"flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, brass hand bell, hand bell, communication

Chris Bailey’s father loaned this bell to Newcomb High School for the first two years until a PA system was installed. It came from his father’s boat in the Middle East. Chris was a Form 1 student in 1969. The bell is now kept at Chris’ home, 4 Yvonne Street, Belmont, 3216. Metal Bell

Recovered by the donor from Geelong tram No. 2 and polished for donation to the Museum. One of four bells that would have been fitted to the tram.Demonstrates a conductors communication bell made for use on tramcars. Brass Conductor Communication Bell, consisting of cast frame, bell, striker, bell pull part, one nut to secure the bell to the frame and two rivets securing for the bell pull part. Has the initials "TB" cast in both ends that were used to secure the bell to the roof - possibly indicating the "Tramway Board" manufacture. Has the number "2" on the underside of the bell in green paint.conductor, bell, trams, tramways, geelong, tram 2

After the wreck of the SS "Time" the bell come under the control of the "Receiver of Wrecks". St Aiden's Church of England, Parkdale, procured this bell from the "Receiver of Wrecks" for church purposes. On 29 July 1951 Rev F L Cuttriss dedicated the bell to church service. Apparently the "Sour" sound irritated some of the congregation. In 1997 St Aiden's offered the bell to this Museum to further enhance the SS "Time" display.Ships bell from SS "Time""Time-1913-Melbourne"time, wrecks, corsair rock, st aiden's c of e church parkdale

The 8 diatonic scales bells were cast in London and arrived in Bendigo in 1873, being rung for the first time at Easter 1876. However due to the unsafe nature of the bell tower the bells could only be chimed rather than rung from 1880. In 1963 they were returned to London for recasting and on their return they were installed at a lower level of the bell tower. They were rededicated by the Bishop of Bendigo in 1964Yellow folder titled: Bendigo's St. Paul's bells. Inside many newspaper articles relating to the bells of St. Paul's cathedral in Bendigo.bendigo churches, st. paul's, bells

This artifact is a large brass bell. It was retrieved from the Schomberg wreck by local divers in the 1970s. Its location at the wreck site was described as "found on the west side towards the stern" the vessel remains lying on a north-south axis, with the bow pointing towards the shore as a result the bell was assessed from this position to have formed part of the cargo. The view that this was not a ship's bell belonging to the Schomberg is gained from two other 'Schomberg Bells' in the Flagstaff Hill collection, both of which have the vessel's name prominently etched into their outer surface. Additional indications indicate that this bell was not intended for maritime use due to the bell's rounded 'bell-curve' shape suggesting it was melodically tunable. Also the detailed basket-type fittings on the bell dome that would allow the bell to be suspended by ropes rather than just bolted to a yoke. The bell is currently on display at Flagstaff Hill, categorised as a church bell part of the Schomberg's cargo that was intended for use in a church within the Victorian colony. As the Colony of Victoria became more established, and its population expanded with the Gold Rush and other emigration from Britain, the demand for regular religious services and permanent church buildings also grew. We will never know if this bell was a specific order or part of an enterprising bell founder's consignment of general stock to a wholesale supplier in Melbourne. A cargo manifest for the Schomberg has unfortunately never been found. The shipwreck of the Schomberg is regarded as of significance to Victoria and is registered on the states Heritage list (S 612). The Schomberg wreck has great historical significance as a rare example of a mid 19th century large, fast clipper ship intended to transport cargo and passengers between England and Australia. The vessel that carried this bell represents the marine advances made in an attempt to break established sailing records between Europe and Australia. Flagstaff Hill holds a noteworthy collection of artefacts from the Schomberg shipwreck. The collection as a whole is primarily significant because of the relationship the objects have archaeologically, not only to highlight the story of the Schomberg ship and later it's wrecking but have an important potential to interpret the story and progression of maritime shipping in the 19th century. The church bell has a standard bell-curve shape and is dull bronze in colour. A large brass bell, plain and without visible maker marks, but with traditionally intricate basket-type cast fittings for suspension from a yoke by a number of ropes or chains. Approximately 3/8 of the bell’s outer surface bears a thin layer of marine growth and limestone accretion, and there is some minor pitting and spots of light verdigris over the remainder. The bell mouth, or lip, is slightly compressed-in in two places. It was retrieved from the wreck of the Schomberg. None warrnambool, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, schomberg, shipwrecked-artefact, clipper ship, black ball line, 1855 shipwreck, aberdeen clipper ship, captain forbes, peterborough shipwreck, ss queen, brass bell, church bell

Bell brought from Longerenong Homestead by former boundary rider William McClintock. Given to John Hamilton and used on his farm to call the men to dinner. In 1922 it was used as a school bell when Higher Elementary School classes began in the Firebrigade Hall and in the Methodist & Presbyterian hall untill the Murtoa H.E.S. was built in 1925 and their own bell was purchased. The bell was donated by Miss Grace Hamilton.The Bell is significant as it was originally the property of William McClintock - one of the original settlers to obtain land in Murtoa around 1872. Its significance is enhanced by its connection to the Hamilton family and its use on the farm and later its use in the temporary school setting.Metal bell with wooden handle and metal clapperwilliam mcclintock, bell, murtoa higher elementary school, john hamilton

This is an early school arithmetic book with the front preface indicating it is the third edition published in 1842. The book appears to have been used about the 1860s by members of the Bell family who probably lived at Cudgee. The names of the children, presumably the Bell children, are scattered throughout the book – Margaret, Walter, Sarah and William. No information is available on this Bell family though there are records of births in Warrnambool of Bell children in the 1850s to William and Jane Bell. Cudgee, a small settlement on the Cudgee Creek, is about 16 kilometres from Warrnambool. This book is of some minor interest because of its age and because it has some association with the Bell family who may have lived at Cudgee in the mid 19th century. The exercises in the book are of interest as examples of the arithmetical problems given to children in the mid 19th century. This is a hard cover book of 282 pages. The cover is dark brown with gold lettering on the spine but the front cover and part of the first few pages are missing. The pages are ragged and dog-eared and quite dirty in places. There is handwritten material in both pencil and ink on the front pages, throughout the text and on the back page. ‘Margaret’ ‘Walter’ ‘Sarah’ ‘William Bell’ ‘Cudgee’ mathematics, bell family, cudgee, warrnambool history

The artefact is a brass cow bell recovered from the 1878 shipwreck of the LOCH ARD near Port Campbell. It was raised by Flagstaff Hill divers in 1973 and is in storage at the Maritime Village. A cow bell is a bell worn around the neck of free-roaming livestock so herders can keep track of an animal via the sound of the bell when the animal is grazing out of view in hilly landscapes. Although they are typically referred to as "cow bells" due to their extensive use with cattle, the bells are used on a wide variety of animals. The earliest examples of truly recognizable cow bells date back to the Iron Age. The use of iron bells in sub-Saharan African music and the Niger–Congo area is linked to the early iron-making technology spread during the Bantu migrations. The earliest archaeological evidence of bells dates back to more than 5000 years ago, from the 3rd millennium BC in Neolithic China. During this era, there is evidence of early forms of pottery cow bells, which were likely used to keep track of goats, sheep, and cattle. These pottery bells were later replaced by metal bells using brass and other materials. The LOCH ARD was constructed on the Clyde in 1873 for the prestigious Loch Line of colonial clipper ships, designed for the Australian run. She sailed from England on 1 March 1878 carrying 37 crew, 17 passengers and a diverse general cargo ranging from luxury items to bulk railway iron. On 1 June 1878, emerging from fog and hearing too late the sound of breakers against the tall limestone cliffs, the vessel struck the southern foot of Mutton Bird Island and sank in 23 metres of water. Of the fifty-four people on board only two survived, one young male crewman, Tom Pearce, and one young female passenger, Eva Carmichael. (See References or Notes below for further details.)The cow bell is believed to be part of the cargo of the Loch Ard and this shipwreck of the Loch Ard is of historical significance for Victoria. Registered on the Victorian Heritage Register ( S 417), with Flagstaff Hill having a varied collection of artefacts from the Loch Ard. Its collection is significant for being one of the largest accumulation of artefacts from this notable Victorian shipwreck. The collections object is to also give us a snapshot into history so we can interpret the story of this tragic event. The collection is also archaeologically significant as it represents aspects of Victoria's shipping history that allows us to interpret Victoria's social and historical themes of the time. The collections historically significance is that it is associated unfortunately with the worst and best-known shipwreck in Victoria's history. Brass cow bell, covered in encrustations. flagstaff hill, warrnambool, shipwreck coast, flagstaff hill maritime museum, flagstaff hill maritime village, maritime museum, great ocean road, shipwreck artefact, loch ard, mutton bird island, glenample, eva carmichael, tom pearce, flagstaff hill divers, cow bell, horse bell, bell smith, vintage bell, farmer, shepherd, drover, stock bell, brass bell

These bells were used at dinner table for calling kitchen staff.Ornamental metal counter bell

Elderly citizens Trugo scorecard used by J BRITTON, G TAYLOR, A. BELL, B POWLEY at Sandridge Trugo Club. Undated. Advertisments for local businesses on reverse - R McKenzie - Funeral Director, South Melbourne, Claude Butcher - Seaside Dairy, Graham St, Port Melbourne, K L Ballantyne Pty Ltd, 295 Grant St, South Melbourne, C F Christensen - Dispensing Chemist, 387 Bay St, Port Melbourne, Victor Sheet Metal Company Pty Ltd, Grant St, South Melbourne.sport - trugo, sandridge trugo club, j britton, g taylor, a bell, b powley, r mckenzie, claude butcher, seaside dairy, k l ballantyne, c f christensen, victor sheet metal company

Research is still being carried out regarding the inscription on this bell. Perhaps it was used for horses during the war. It may have been a souvenir or perhaps just a political statement, similar to 'Buy Australian'. Cow bells were common to colonial agriculture and transport, used wherever animals were turned out to graze overnight and had to be rounded up again next morning. Bells were fastened around the necks of household milking cows, domestic goats, bullock teams, horse teams, and camel teams, to help find them in the pre-dawn light. Station shepherds and cattle drovers also used them to warn of any disturbances to their flocks and herds overnight. The bells were a necessary item in a largely unfenced continent. So important, that Anthony Mongon began making his pot-bells at Yackandandah from 1861, August Menneke produced the “Wagga Pot” from 1867, and Samuel Jones started manufacturing his distinctively shaped “Condamine Bell” in 1868. However, these deeply resonant Australian bells were made from iron — Mongon and Jones were blacksmiths who simply beat old pitsaw blades into shape. Few genuinely brass cow bells were made here, the vast majority being imported from Britain where the industry of brass founding was already well established. (Some bells were also imported from the United States, but these too were nearly all of iron).This bell is historically significant as typical of a cow bell used by farmers and herdsmen in Colonial Victoria. Cow bell, brass, topless pyramid shape, inverted "U" shaped pin attached. Pin and clapper are iron. Bell is embossed on sides. Embossed "ADVANCE / VICTORIA" and "WWI"flagstaff hill, warrnambool, shipwreck coast, flagstaff hill maritime museum, flagstaff hill maritime village, maritime museum, great ocean road, cow bell, horse bell, bell smith, vintage bell, farmer, shepherd, drover, stock bell, brass bell, advance australia, wwi

Livestock bells were once used extensively throughout the Australian countryside. The first ones were imported from England and America, but gradually local blacksmiths started turning out their own bells. These bells were used on a leader in a bullock team or on other stock so they could be easily locatedAn iron bullock bell with handle and a large clapper inside.bullock-bell rural-industry livestock

'After training as a Cartographic Draftsman within the mining industry, I worked as a property illustrator for real estate firms in the eastern suburbs of Melbourne for 23 years from 1983. I initially photographed houses with a Polaroid camera and made a 'thumbnail' sketch while there. The photos were used to scale off a sketch in pencil and then that sketch was overlaid with drafting film and the 'pen and ink' completed. The pens I used were the Rotring ‘Rapidigraph’ drafting pens. The ink was also made by Rotring (German).The film was ‘Rapidraw’, polyester drafting film, double matte. It takes a very fine line and doesn’t bleed. As well as house sketches, there were often floor plans and site plans ordered. Aerial sketches were ordered when the property needed an overall view.' (Margaret Picken, 2020)This property illustration is one of a series created by Margaret Picken for a range of real estate agents in Melbourne between c. 1983 and c. 2006. Each work is signed and dated by the artist.Gift of Margaret Picken, 2020Pen and ink property illustration on drafting film of 52 Bell Street, Hawthorn by Margaret Picken.52 Bell St, Haw E, Margaret Picken '91. Woodards - Hawthorn.artist - margaret picken 1950-

The Blair-Bell medal was awarded quinquennially for the advancement of science in gynaecology or obstetrics or both in the preceding five years. The image on this block was used in an article, "The Blair-Bell Award" in the Australian & New Zealand Journal O + G [1961]1:77 featuring Prof. F.J. Browne, winner of the Blair-Bell Medal, 28/10/60. Also used in obituary of Professor Browne.Metal printer's plate attached to a wooden block. Depicts the official recto medal image of the Blair-Bell medal, featuring a portrait of William Blair-Bell. blair-bell award, browne fj, printing