Candle stick holders were used to hold and display candles for light. They were used before commonly in domestic situations before lighting from kerosene, gas and electricity was freely available and affordable.This is an example of lighting used commonly before the late 19th century.Candle stick holder enamel grey speckled with dish base, side handle and fixture for holding candle.flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, domestic lighting, candle, candlestick, candle holder, light

Set of two decorative candle protectors for piano brackets. Pink with gold bird and flower design.candles, candle equipment

Although donated with the Volum collection, this candle holder may have not been used on board ship,. The trademark with the trumpet and banner indicates it was made after 1879 (according to reference) by Sheffield manufacturer James Dixon & Sons. Victorian silver electroplated candle holder with candleMaker's mark underneath: Z / Trumpet symbol / J / D / & /S / E / P / B / M / 389 / bvolum collection, portable furniture, geelong, peterhead, scotland, captain, seafaring, whaling

A battery operated illuminating candle which lights up a small red flame when the red button is depressed. This candle was most likely sold at the Carols by Candlelight concert.1 plastic candle with lightcarols by candlelight, royal victorian institute for the blind, fundraising

From the Britannia Mine (Ballarat) Candle remnants from early Ballarat mines are quite rare..1) White/cream candle remnant. Candle mold seams are evident. Stored in green pharmaceutical tin with screw lid. (?) Found when removing for filling motor spaces Camp Street. .2) white candle remnant from the Britannia Mine at Cambrian Hill held in a 'Barker Cake Container; tin. A handwritten note inside the tin indicates 'Piece of Candle from Mullock's Britannia Mine. Ballarat. .2) Piece of Candle The Great Leviathan Quartz Mining CosMine at Cambrian Hill near Ballarat. Picked up by Donald Doyles Mather whilst cleaning out Ballarat South Goldfield Co's Leviathan Shaft when reopening "Great Leviathan in in the year 1948. The candle was last used by miners in the Great Leviathan in the drive where found Year G. Leviathan Closed down "______" mining, candle, lard, great leviathan, donald mather, cambrian hill, great leviathan quartz mining company

Set of 5 with catalogue no 0455, 0518, 0535, 0536. 3 stem, silver EPNS candelabra. Floral design around base and candle holders. Curved branches.Made in England Made in England by Ianthe of England On base: C31On candle holders: C34candelabra, mess

Candle snuffers, off "Loch-Ard" RelicsRelics recovered from the wreck site of the Loch Ard prior to amnestyConical candle snuffer from the Loch Ardloch ard, ships relics

Found at 'Mulvra', a property near Linton belonging to Digory Pendray Roberts. It is believed that the candle-holder was forged in the blacksmith's workshop at the property. Found in the late 1940s and donated to Linton & District Historical Society by Lyle Fletcher, a descendant of Digory Roberts.Iron candle holder, round section to hold candle, with horizontal spike attached, to enable candle holder to be pushed into rocks or clay of mine wall.mining, candle holders

Historically this item was before electricity lighting was available. There is no protection around the candle to prevent wind or air movement from extinguishing the candle flame therefore this means of night illumination was used within a house environment. It could be easily moved from room to room but would have insignificant "candle power" to lighten more than a few metres around it. This item was before kerosene lamps, gas lighting and electric/battery lamps This candle holder would have been used within the homes of Kiewa residences to illuminate the way from room to room where there were no other forms of lighting available. As it is relatively light in weight and with a finger/s grip it is highly portable and was in time replaced by battery powered torches. It was used in a period where home, or local made candles were a necessity of living. This Item was used before battery powered torches were invented. Although candles are still used in the late 20th and after, their fundamental use has changed and they function more as a mood enhancement item or as a back up for an electrical power failure and the alternative battery powered torch also runs out of power.1. This small basin shaped candle holder is formed of metal and sealed with a pale grey enamel skin. It has a black painted edge and finger holder. It has a raised vertical spout for the securing of the candle. The bottom of the basin is contoured from the candle base to the outer edge to allow for melted candle wax to be safely held within the basin. 2. As above. The handle is rusty but otherwise in good condition. candle-holder, portable light enamel household goods

A woman holding a candle holds a boy with a Santa hat on, in her lap as they watch the stage.Col. photograph of a woman holding a candle and a boy.carols by candlelight

(Candle Holder 1) Likely used as a bedside or household candle holder in the late 19th or early 20th century. The enameled surface suggests it was made for durability and ease of cleaning. The handle design indicates it could be portable or mounted on a wall. (Candle Holder 2) Could have been used in homes, barns, or workshops for lighting. The metal construction suggests it was a practical and durable design. The reflector would have helped maximize light output, making it useful in dimly lit areas. (Lantern 3) Likely used for outdoor or travel lighting, possibly in the late 19th or early 20th century. The enclosed glass design suggests it was meant to protect the flame from wind and rain. Could have been used in homes, farms, or for transport by foot or carriage.(Candle Holder 1) A round, shallow dish-style candle holder with a central cylindrical candle socket. It has a curved handle on one side for carrying or wall mounting. The surface appears to have remnants of white enamel coating, which is chipped and worn. (Candle Holder 2) A round metal candle holder with a shallow dish and a cylindrical candle socket. Attached to the back is a small flame snuffer. (Lantern 3) A rectangular metal lantern with glass panels on the sides. Features a peaked, vented top for heat dissipation. A candle is visible inside, secured in place. The frame appears to be reinforced with metal wire.lantern, light, lamp, candle holder, candle, household item

A volunteer selling candles at Carols by Candlelight 2007, held at the Sidney Myer Music Bowl.1 digital image of man selling candles at concertcarols by candlelight, vision australia, volunteers

Crowds at an undated Carols by Candlelight concert hold their candles high.B/W photograph of people holding their candles aloft at Carols by Candlelight.carols by candlelight, royal victorian institute for the blind, fundraising

This candle mould was used in the past to make six candles. Molten wax or tallow, together with a central thread or cotton, were poured into the columns and when set were removed from the moulds. Until the advent of electricity in the 1920s in Warrnambool, candles, lanterns and lamps were an important source of lighting in homes. Few homes had gas lighting. Many householders made their own candles from waste fat etc. This mould is retained as an example of the way householders in the past made their own candles to assist lighting in the home. This is a mould with a rectangular base and six cylindrical hollow columns with pointed ends affixed to the mould base. The columns are topped by a rectangular metal tray with the openings of the columns in the base of the tray. There is a metal clip attached to one end of the tray. The mould is very rusty warrnambool history, candles

The hairdresser's singer was used in the local hairdressing and tobacconist shop owned by Hugh Jones from 1947-70, until such treatments were abandoned. Mr. Jones retired in 1976. Knowledge of the use of such hairdressing aids assists in the understanding of progress made in modern hair treatments.A green-coloured metal cylinder containing white dropless tapers (candles) which were used to singe freshly-cut hair to prevent "bleeding ends".Black painted signage on the cylinder: "Ship Brand" "Price's White Dropless Tapers" "Manufactured by Price's patent Candle Co. Ltd., London & Liverpool"hairdressing singer

Two graphic images of a candlelight, with radiant heat/light coming from the flame. Above the candle is written 'Carols by Candlelight'. Discovered in an envelope with the description 'C x C bromide' written on the front.2 B/W images of heat radiating from lit candlecarols by candlelight

This candle holder would probably be mostly used for a candle placed on a table, cupboard or bench. It is unornamented and so would not occupy any place of importance. Candles and lamps were the chief source of light in households until the advent and use of electricity in the early 20th century. Gas lighting was in use in street lighting and in industry for some time before this. Electric lighting for households became available in Warrnambool in the 1920s but the use of lamps and candles was still prevalent until the middle of the 20th century. This candle holder is of some interest as an example of a household item from times past. It will be useful for display. This is a china candle holder. It has a white glaze and the base is circular in shape. The rim or lip is ridged around the edge. One side of the object is cracked. household lighting, history of warrnambool, candle holder

This sconce - wall mounted candle holder or light fixture is simple / basic without any decoration. It was able to swivel. It may have been used on either the interior o exterior walls of buildings. The light is usually, but not always, directed upwards and outwards, rather than down. The long bracket kept the candle a safe distance from the wall and ceiling.This sconce was used by a resident of the Kiewa Valley.Shiny metal rod with candle holder at one end and a small thin rod at the other for attaching to a device on a wall. The candle holder is surrounded by a metal shallow 'cup' with 11 oval holes enabling the wax to fall to the centre where there is a hollow globe and allowing the light to shine upwards.sconce, candle holder, wall mounted candle holder

This chamberstick-style candle holder was commonly used in the 18th and 19th centuries as a portable light source before the widespread availability of electric lighting. The handle allowed for easy transport, making it a practical bedroom or hallway light. The scalloped dish base was designed to catch wax drips, preventing messes on surfaces. This type of candle holder was often used in homes, inns, and workplaces, particularly in rural areas where candlelight remained a primary source of illumination for longer. The aged appearance and patina suggest this item dates from the 19th or early 20th century.This is a small metal chamberstick-style candle holder, designed to hold a single candle. It features a scalloped, dish-like base with wavy edges, likely meant to catch dripping wax. The central candle cup is elevated on a decorative turned stem, with a slightly flared lip to support the candle. A circular loop handle is attached to one side, allowing for easy carrying. The base sits on three or four small round feet, elevating it slightly above a surface. The surface shows signs of aging, patina, and oxidation, suggesting it is made of brass, iron, or another aged metal. Donated by Alan McCREDDEN of Grass Flat.candle holder, candle, light, household item

Used to hold wax tapers for lighting candlesLong black cylindrical tin case for wax tapers. Has gold oriental scenes. Made by Bryant & May, London (1916)Bryant & May, Londonwax tapers, candles, lighting, bryant & may

Tin construction, with sections for eight glass panels (1 missing, 1 incomplete. Perforated tin panels top and base. steel wire bracket for holding or hanging on top. Steel wire sliding latches on top and base as well as one side, when both are unlatched all sides are hinged and lantern can be folded up for storage. Contains a candle (not original), 2 stamped tin labels.1) Use 1/2 candles only. 2) E.A. Harper & Sons/1916/Redfern N.S.W.lantern, , e, world, war, a, harper, son s, 1916, renfern n s w, candle, folding, one

Ordinary candle holders and candles.

This is a china candle holder which is a souvenir of Warrnambool with an image on the item of the Warrnambool War Memorial. Czechoslovakia was established as a country in 1918 and began to export china goods in the 1920s and 30s when the label ‘Victoria China’ became well known. The Warrnambool War Memorial at the southern end of Liebig Street was unveiled and dedicated in 1926. It was designed by John King, the Headmaster of the Warrnambool Technical School and erected by the local stonemasons, Wooles and Carpenter. This candle holder is of some interest as an example of the tourist souvenirs that were popular in Warrnambool pre-World War Two. This is a china candle holder with a circular base in brown-orange and white tonings and a fluted edge. The candle holding section is also circular with the same colour tonings and a slightly fluted edge. Inside this are the hardened remains of a candle. The base has a handle attached. On one edge of the base there is a colour image of the Warrnambool War Memorial. The maker’s name at the back has a crown symbol. ‘Soldier’s (sic) Memorial, Warrnambool’ ‘Victoria China, Czechoslovakia’ victoria china czechoslovakia, warrnambool war memorial, history of warrnambool

No specific information is available on this item but it was a common object in the past when candles were an important source of light in a house. Candle snuffers are also used in churches but these are usually larger in size. This item has no provenance and is in a poor condition but will be useful for display.This is a metal candle snuffer in a very rusted condition. It may have originally been silver. It has two scissor-like handles which open a lid which has a sharp edge which cuts off the top of the wick and extinguishes the flame. The pointed end of the item was also used to trim the candle and the snmall container behind the lid stored the wick pieces cut off. There is an embossed flower decoration on the handle and more decoration on the box area. There are three rests to allow the snuffer to sit on a surface.candle snuffer, warrnambool

Used for collection animal fat in order to make candles.Very heavy large rusty round pan with a handle and blunt metal spikes. Around the edge is a narrow lip with a small pouring spout.social history, candles, farms, equipment, george evans collection

Portable candleholders were commonly in use in Australian homes in the 1800s. Candles were very expensive in Australia and often were not available in stores. However, after 1850 the price of candles was reduced and they became readily available throughout Australia. Candleholders were popular as they protected furniture from hot wax. The dish around the candle stem collected the hot wax that could be reused later. When carrying the candleholder, the dish also protected the hand from the hot wax. This one was used by Helena Warren of Newmerella.The candle-holder is an example of an item commonly used before electric light came to the area.A white enameled candleholder which is a hollowed round, white, saucer shape edged in dark blue. In the centre there is a candle-holder on a short stem. It has a dark blue finger-grip ring on the side.lighting candle-holder