Magazine No 12 of 13 Printed in the field by the AIF Printing Section during WW1 Price 10 centimes Magazine of cream colour pages with sketch of soldier with rifle Top - No. 12 March 1919 Centre - Aussie aussie - the australian soldiers magazine, ww1, 1919

After the war, Phillip Harris produced a monthly in Sydney and renamed it 'Aussie: the Cheerful Monthly' from 1920. It built a sizeable circulation and for several years it published the major Australian writers and cartoonists of the day. It set out to sustain the digger culture and defend the rights of the veterans, while also embracing the re-adjustment of returned soldiers into civilian life. Magazine of cream colour pages containing stories and sketches No. 14 Aussie, April 15 1920 aussie:the cheerful monthly, magazine, 1920

Xylonite cream colour comb holder with flower trim

These cards were available to service personal while serving overseas to keep in touch with family and friends. This card was sent from France on the 31/10/17 by H.D.Sutherland to relay his best wishes to family and friends for Christmas and new year. Small rectangular greeting card. Cream in colour. Card has two small holes punched in it down one side with a red cord through them tied into a bow. Greetings from 3rd Australian Divisional Headquarters. Xmas1917. New Year1918.

Zilles Printers was begun by Lewis Zilles in the early 1930s. It was in McKenzie Street Ballarat. His son Jeffrey also became a printer - letterpress, offset and screen printer. The business became Zilles Printers/Graphics and was in Armstrong Street and later Bell Street Ballarat. A form of sticker began in 1839 when Sir Rowland Hill invented adhesive paper. The first self-adhesive label was invented in 1935 by Stanton Avery - Avery Labels. The sticker was used on the bats as advertisement. Terry Davies was one of the top batsmen in Ballarat during the 1970s. He played from 1971-71 to 1982-83, a total of 151 games. He captained Ballarat in Melbourne Country Week as well as being Captain-Coach of the club. Terry was named in the Northern Roosters Cricket Club Legends Team of the Century 1920-2000.Cream colour card backing a clear sticker with black print.Name of bat and name of maker TD. - Emu Cricket Bats, handcrafted from finest Australian Fisher Willow. Terry Davies, Ballarat Victoria.zilles printers, ballarat, sir rowland hill, adhesive paper, santo avery, avery labels, self-adhesive label, terry davies, batsman, melbourne country week, northern roosters cricket club, legends team of the century 1920-2000

The St Peter chapel was furnished thanks to donations of supporters of the Mission. Some were donated for the previous temporary chapel at the Sidney Street site and some are lost. - Holy Table (altar): donated by Mrs Shuter, in Memoriam of Charles Shuter - Cross: - Vases (lost) - Stained Glass Windows: donated by Misses Edith and Ruby Forge, in Memoriam J. Leslie Forge - Altar Lectern - Alms Dish: donated by the Godfrey sisters in Memoriam of their parents - Credence Table: donated by - Sanctuary Chairs: donated by Miss Gladys Hawkey - Sanctuary Rail - Choir Stalls and Chancel Screen - Lectern (donated in 1909) - Pulpit (donated in 1907) - Prayer Desk (a plaque to Goldsmith) - Bible and Prayer Books - Font - Cover for Font - Pews - Offertory Collection Plates (lost) - Music Cupboard in Vestry (lost) The document lists all the gifts donated by generous supporters of the Mission in 1917. The chapel was built during World War 1 as. memorial to the merchant seamen lost during the war. These items are still in the chapel today.A4 document on cream colour paper, wording in black ink.gifts, chapel of st peter, flinders street, mission to seafarers, mission to seamen, gladys amy hawkey (1886-1974), reverend alfred gurney goldsmith, gifts-1917, amelia shuter nee lord, beatrice elizabeth higgins (nee shuter), charles shuter

The first Seafarers Service was held on 23 October 1905 in the St Paul's Cathedral in London to celebrate the Centenary of the Battle of Trafalgar and the death of Vice-Admiral Horatio Nelson on 21 October 1805. Reverend Alfred Gurney Goldsmith launched the first Seafarers Service two years later and the first service was held on Sunday 10 November 1907 and has been held every year since.The service continue to reflect the full range of the maritime activities in Australia. Representatives come from the Royal and Merchant Navies, the commercial world, shipping companies, mission and philanthropic societies, veterans’ associations, labour unions, youth and leisure organisations, but anyone is welcome to attend.8 pages booklet in cream colour printed in black ink.seafarers service, 1907, reverend alfred gurney goldsmith, dr lowther clarke, archibishop of melbourne, st paul cathedral, admiral sir wilmot fawkes, seamen's mission, missions to seamen, battle of trafalgar, trafalgar day, horatio nelson

In the late 1800s and early 1900s, a large number of seamen were from Scandinavia. The Mission adapted by translating its flyers in different languages and ladies from the Harbour Lights Guild would even learn langages to be able to talk to seamen.Printed in blue program of events in Norwegian on cream colour paper.Written in black ink: corrections of mistakes made social events, norwegian, thompson street, williamstown, port melbourne, seafarers welfare, australian wharf

Cotton corset, cream colour. Metal hook fastenings and rivets."Liberty"

This type of ticket was issued by "safety zone sellers" at the busy city stops to relieve the work on tram conductors. The tram conductor would punch the ticket to cancel it. Has the issuer "MMTB" printed on the ticket and ticket number 65080, ABJ series. Issued using Ultimate ticket machines. See item 7506 for a roll of these tickets that would be used in the machine.Demonstrates the Ultimate machine type ticket issuing machines.10c Ulitimate type ticket printed on cream colour paper.mmtb, tramways, tickets, ultimate, machine issued tickets

About the 1992 Barcelona Olympic Games donor Doug Pleasance wrote- During the 1980's the Australian wool industry was at its most prosperous times with record numbers of sheep producing wool receiving ever increasing values due to the success of the Reserve Price Scheme, and the overall guidance of the Australian Wool Corporation (AWC). As a humble technician, my role was a low profile newly created position of Controller, Technical Marketing where wool was to be marketed on its technical properties, as distinct from the Product Marketing Group which exploited the traditional high profile approach of marketing wool;s superior fashion attributes. The Woolmark was the tool central to this approach. The 1992 Barcelona Olympic Games saw an evolutionary change in designer selection. A Declaration of Interest Form was communicated to over forty potential designers. The task and especially tight timelines that were involved deterred many aspirants, however, there remained eight designers with the potential we were seeking. These eight designers were paid $3,000 per submission and the winning designer, Wendy Powitt, was paid $15,000. For the first time the judging panel included two athletes, one male swimmer and one female basketballer, their influence was pivotal. The ensemble consisted of three elements- 1. The Official Uniform which was used for travel and all official functions. This included: a tailored blazer and trouser/skirt (all water repellent) by Fletcher Jones, pure wool olive-green faille fabric by Foster Valley, cotton PE formal shirt by Pelaco, pure wool knitwear by Spangaro, printed wool tie by TD Noone, wool nylon socks by Holeproof and footwear by Hush Puppy. 2. Opening Ceremony Uniform a lightweight wool fabric printed with floral designs that had been inspired by the work of Australian artist Margaret Preston. This included: Lightweight W/PE shorts by Fletcher Jones in Foster Valley Fabric, socks by Holeproof and footwear by Hush Puppy. 3. Village Clothing was designed to be highly visible garments to make it easy to  spot the Aussie and helped to contribute to good team spirit. This included: A pure wool shirt featuring blocks of contrasting colours, and a newly developed stretch 50:50 wool/cotton fabric by Bradmill was made into shorts and jeans by Fletcher Jones.8129.1 - Yellow woollen tie printed with an Australian floral design inspired by the work of artist Margaret Preston. Half of the tie is unprinted and cream in colour. On the reverse of the tie is a label with the manufacturers name. 8129.2 - Yellow woollen tie printed with an Australian floral design inspired by the work of artist Margaret Preston. Half of the tie is unprinted and cream in colour. On the reverse of the tie is a label with the manufacturers name. 8129.3 - Sample fabric showing the printing layer of tie, uncut.8129.1 - Tag on reverse - WOVEN & MANUFACTURED IN AUSTRALIA BY "Tee - Dee" EXCLUSIVELY FOR THE AUSTRALIAN WOOL CORPORATION 8129.2 - Tag on reverse - WOVEN & MANUFACTURED IN AUSTRALIA BY "Tee - Dee" EXCLUSIVELY FOR THE AUSTRALIAN WOOL CORPORATION 8129.3 - Stapled Label - "PURE WOOL PRINTED TIE"1992 barcelona olympics, sport, athletes, fashion, design, uniform

This cot cover insert was made during the 1929 depression an a time of financial hardship. It was made by Jean Hepner's Grandmother from used woollen garments. They were hand stitched on to an old woollen blanket. The quilt was used by at least five of the seven children born in to this family and also by grandchildren in later years. It was used with assorted covers which were replaced when needed.Child's cot cover insert (wagga) made from discarded woollen garments such as socks, stockings and vests and stitched in multiple layers on to a woollen blanket. It is mostly cream in colour with patches of blue and brown.quilting, history, depression era, wagga, geelong, quilting - history

Small cream colour book with design of the flying angel of the Mission on topnon-fictionWhen Heather Hartshorne stumbled across the Missions to Seamen complex in Port Adelaide,the magnificent dance hall spoke to her of decades of liveliness and rattling good times. Then what was the story behind the beautiful chapel?port adelaide, mission to seamen, flying angel, ladies harbour lights guild, lhlg, south australia, heather harsthorne

The Process of Making Pottery Decorating, Firing, Glazing, Making, Technical There is a rhythm and flow to clay. It can’t be done all at once! Even the making process! It can take weeks to get everything done, especially if you can only work on your pottery once a week! Even though we have three hour classes, it’s often just not enough time! Here is an overview of some of the processes so you have a bit more grasp on some of the technical stuff! Step One – Design There are SO many ideas out there for making stuff in clay! From delicate porcelain jewellery, through to heavy sculptural work and everything in between. Deciding your direction is sometimes not that easy – when you first start, try everything, you will naturally gravitate to the style that you enjoy! The options and variations are endless and can get a wee bit overwhelming too! Check in with me before you start to ensure your ideas will work, what order you might do things, how you could achieve the look you are seeking and any other technical data required! Step Two – Making Clay is thixotropic. This means that as you work with it, the clay first gets sloppier and wetter, before is begins to dry in the atmosphere. For most things, you simply can’t do all parts of the project at once. An example of work order might look like: Get last weeks work out from the shelves Prepare clay for today’s work – roll your clay, prepare balls for throwing, make the first stage of a pinch pot) Clean up last week’s work and put it on the shelf for bisque firing Check that you have any glazing to do – and do enough of it that you will have time to finish your main project Do the next step of your next project – there might be a further step that can’t be complete immediately, in that case, wrap your work well and put onto the shelves. Letting your work rest for a while can really help keep your work clean and professional looking. Many things require bagging under plastic to keep it ready for work the next week – put your name on the outside of the bag so you can find your work easily. We have stickers and markers. Consider how you want to decorate your work – coloured slip can be applied at a fairly wet stage (remembering that it will make your work even wetter!). Trying to apply slip to dry clay won’t work! If you want to do sgraffito – you will need to keep the work leather hard (a state of dryness where you can still work the clay with a little effort and a little water and care). Step Three – Drying Most of the time your work can go into the rack uncovered to let it dry out for the following week. If you want to continue forming or shaping you will need to double bag your work – put your work on a suitable sized bat and put the bat in a bag so the base of the bag is under the bat, then put another bag over the top of the work and tuck the top of the bag under the bat. If you want to trim (or turn) your thrown work the following week, it should also be double bagged. If your work is large, delicate, or of uneven thicknesses, you should lightly cover your work for drying. When considering the drying process, bare in mind the weather, humidity and wind! The hotter and dryer, the faster things dry and work can dry unevenly in the shelves – this can lead to cracking – another time to lightly cover your work for drying. Step Four – Trimming and Cleaning Up Your work is dry! It is called greenware now and it is at it’s most fragile! Handle everything with two hands. I often refer to soft hands – keep everything gentle and with your fingers spread as much as possible. Try to not pick up things like plates too much, and always with both hands! Before your work can be bisque fired it should be “cleaned up”. You work won’t go into the kiln if it has sharp edges – when glazed, sharp edges turn into razor blades! Use a piece of fly wire to rub the work all over – this will scratch a little so be light handed. Use a knife or metal kidney to scrape any areas that require a bit more dynamic treatment than the fly wire offers! Finally, a very light wipe over with a slightly damp sponge can help soften and soothe all of your edges and dags! Trimming thrown work: If you are planning to trim (or turn) your thrown work (and you should be), make sure you bag it well – your work should be leather hard to almost dry for easiest trimming. Use this step to finish the work completely – use a metal kidney to polish the surface, or a slightly damp sponge to give a freshly thrown look. Wipe the sponge around the rim after trimming, and check the inside of the pot for dags! Trimming slip cast work: Usually I will trim the rims of your work on the wheel the following day to make that stage easier, however you will still need to check your work for lumps and bumps. Last but not least – check that your name is still clearly on the bottom of your work. Step Five – Bisque Firing When the work is completely dry it can go into the bisque kiln. The bisque kiln is fired to 1000°C. This process burns off the water in the clay as well as some of the chemically bound water. The structure of the clay is not altered that much at this temperature. Inside the bisque kiln, the work is stacked a little, small bowl inside a larger bowl and onto a heavy plate. Smaller items like decorations or drink coasters might get stacked several high. Consideration is paid to the weight of the stack and shape of the work. A bisque kiln can fire about one and a half times the amount of work that the glaze kiln can fire. The firing takes about 10 hours to complete the cycle and about two days to cool down. Once it has been emptied the work is placed in the glaze room ready for you to decorate! Step Six – Glazing Decorating your work with colour can be a lot of fun – and time consuming! There are three main options for surface treatment at this stage: Oxide Washes Underglazes Glazes Washes and underglazes do not “glaze” the work – It will still need a layer of glaze to fully seal the clay (washes don’t need glaze on surfaces not designed for food or liquid as they can gloss up a little on their own). Underglazes are stable colourants that turn out pretty much how they look in the jar. They can be mixed with each other to form other colours and can be used like water colours to paint onto your work. Mostly they should have a clear glaze on top to seal them. Oxides are a different species – the pink oxide (cobalt) wash turns out bright blue for instance. They don’t always need a glaze on top, and some glazes can change the colour of the wash! The glazes need no other “glaze” on top! Be careful of unknown glaze interactions – you can put any combination of glaze in a bowl or on a plate, but only a single glaze on the outside of any vertical surface! Glazes are a chemical reaction under heat. We don’t know the exact chemicals in the Mayco glazes we use. I can guess by the way they interact with each other, however, on the whole, you need to test every idea you have, and not run the test on a vertical surface! Simply put, glaze is a layer of glass like substance that bonds with the clay underneath. Clay is made of silica, alumina and water. Glaze is made of mostly silica. Silica has a melting point of 1700°C and we fire to 1240°C. The silica requires a “flux” to help it melt at the lower temperature. Fluxes can be all sorts of chemicals – a common one is calcium – calcium has a melting point of 2500°C, however, together they both melt at a much lower temperature! Colourants are metal oxides like cobalt (blue), chrome (green through black), copper (green, blue, even red!), manganese (black, purple and pink) iron (red brown), etc. Different chemicals in the glaze can have dramatic effects. for example, barium carbonate (which we don’t use) turns manganese bright pink! Other elements can turn manganese dioxide brown, blue, purple and reddish brown. Manganese dioxide is a flux in and of itself as well. So, glazes that get their black and purple colours, often interact with other glazes and RUN! Our mirror black is a good example – it mixes really well with many glazes because it fluxes them – causes them to melt faster. It will also bring out many beautiful colours in the glazes because it’s black colouring most definitely comes from manganese dioxide! Glaze chemistry is a whole subject on it’s own! We use commercial Mayco glazes on purpose – for their huge range of colour possibilities, stability, cool interactions, artistic freedom with the ability to easily brush the glazes on and ease of use. We currently have almost 50 glazes on hand! A major project is to test the interactions of all glazes with each other. That is 2,500 test tiles!!!! I’m going to make the wall behind the wheels the feature wall of pretty colours! Step Seven – Glaze (Gloss or sometimes called “Glost”) Firing Most of the time this is the final stage of making your creation (but not always!) The glaze kiln goes to 1240°C. This is called cone 6, or midrange. It is the low end of stoneware temperatures. Stoneware clays and glazes are typically fired at cone 8 – 10, that is 1260 – 1290°C. The energy requirement to go from 1240°C to 1280°C is almost a 30% more! Our clay is formulated to vitrify (mature, turn “glass-like”) at 1240°, as are our glazes. A glaze kiln take around 12 hours to reach temperature and two to three days to cool down. Sometimes a third firing process is required – this is for decoration that is added to work after the glaze firing. For example – adding precious metals and lustres. this firing temperature is usually around 600 – 800°C depending upon the techniques being used. There are many students interested in gold and silver trims – we will be doing this third type of firing soon! After firing your work will be in the student finished work shelves. Remember to pay for it before you head out the door! There is a small extra charge for using porcelain clay (it’s more than twice the price of regular clay), and for any third firing process! Once your work has been fired it can not turn back into clay for millennia – so don’t fire it if you don’t like it! Put it in the bucket for recycling. https://firebirdstudios.com.au/the-process-of-making-pottery/Ceramics have evolved over thousands of years.Earthenware dessert plate, cream colour. Made by Alfred Meakin, England. Backstamped ‘Alfred Meakin England’. flagstaff hill, warrnambool, shipwrecked-coast, flagstaff-hill, flagstaff-hill-maritime-museum, maritime-museum, shipwreck-coast, flagstaff-hill-maritime-village, alfred meakin, ceramics, earthenware, kitchenware

A programme from the Annual Demonstration held at the Melbourne Town Hall on 21st and 22nd October 1955. Throughout the year Melbourne Legacy provided classes for Junior Legatees such as dancing, gymnastics and eurythmics, the Demonstration was an annual event to showcase their skills. Melbourne Legacy conducted Annual Demonstrations / Parades from 1928 through to 1979, usually held at Melbourne Town Hall or Olympic Pool Stadium.A record of a Junior Legatee Demonstration in 1955.Cream colour paper with green printing on both sides with 2 folds. Front fold; Melbourne Legacy Junior Legatees present their Annual Demonstration, Melbourne Town Hall 21st & 22nd October 1955 Center folds - detail the program order Back fold - acknowledges those which assisted in training the Junior Legatees junior legatee, annual demonstration

The Warrnambool Woollen Mill was established in 1910 in South Warrnambool by a local company, with the building erected on a site that formerly housed another woollen mill destroyed by fire in 1882. The Warrnambool Woollen Company operated successfully for many years with over 700 employees in the 1940s and a good national reputation for quality goods. It made blankets and other woollen goods and was the first company in Australia to manufacture electric blankets. In the 1960s the mill was sold to the Dunlop Company and for the next thirty years it was bought and sold several times, finally closing in 2000 after 90 years of operation. The woollen Mill was built on a site which was in easy access to the railway line which operated along the original tramway line from the town to the jetty. It is possible that this land would have been used for parking during the period of 1950's to 1970's which was a successful period of manufacturing and trade for the Woollen Mill. A link between an important infrastructure and one of Warrnambool's most important industries.Four page folded document cream in colour . Printed form with diagram of the land in question coloured in pink . Seals of both Victorian railways and Warrnambool Woollen mill are stamped beside signatories on page 3. Dated 30th April 1952. Signed R Naylor for the Warrnambool Woollen Mill and two unreadable signatures for Victorian Railways.warrnambool, warrnambool woollen mill, warrnambool railways, lease victorian railways and warrnambool woollen mill

Foolscap sheet music, title "Für Elise (Album Leaf)" by L. Van Beethoven. Edited by Ernst Von Dohnányi. Price 2/- net. Cream in colour. Published by Allan & Co. Pty. Ltd.

Greeting Card All Happiness To You: Embossed greeting card with scalloped edges, cream in colour with green and red flowers. Red border one end Printed All Happiness To You 'and Shakespeare. Box 625ephemera, mementoes, celebrations, greeting card

Cream in colour, rectangular shaped holder with no matches. One side has a printed photo of an iron bridge, the other side has a printed photo of a jetty or dock. Both photos are framed with a pattern of red and yellow.Souvenir of San Remo (VIC)

This Bendigo Cup Sweep fund raiser was last conducted by Jack Barnes OAM in 2004, he was Secretary of the Bendigo RSL/Bendigo District RSL for 43 years. The letters L.S.R being reversed meaning R.S.L..1) - .8) Envelopes cream colour with the front stamped in blue, rear is blank."L.S.R Memorial Hall, Bendigo Cup - Cash and butts in the envelope - return by - Envelope No"brsl, smirsl, cup sweep

From the McNamara Collection- Child's nylon collar with points & front tie - Edged in lace - Cream colourNilchild's clothing, collar, lace, mcnamara, tyack

George Vivian Trewartha (1917-1985) was a master draper. He married Marjorie Isobel Harris in 1945 after serving as a Leading Aircraftsman during WW2Trewartha's Bendigo: Material tag cream in colour with green print * Trewartha's Bendigo metre, Price and Good Value* In red brio hand written is 140cm, 7 metre and $1.50. Has sample imprint. Box 625business, retail, material, trewartha's bendigo

Rectangular storage box with three compartments. May have been used for collar and sleeve cuff studs, or a jewellery or sewing box. Full length hinged lid. Cream in colour. Black lettering on lid. Old box 74.Made in England (on base) stamped into base-RMO in black ink on lid Top RH corner.U2656 written in black oc clear nailpolish on underside top left cornercostume accessories, haberdashery, sewing box

The bottle of port is one of many memorabilia items from the era.Like all of the Vietnam War memorabilia, this bottle of port is a reminder of the Vietnam War and of the Veterans Service 'in country'. Clay bottle of port; bottle cream in colour with black seal. Bottle has two pictures around the side: black sketch of Vietnam Memorial at Australian War Memorial, Canberra; colour iconic picture of diggers awaiting dustoff. Above the sketch of Vietnam Memorial is text: "Vietnam Memorial', below the sketch is "For all those who served, suffered and died 1962 - 1973"; a map of Vietnam sits between the Vietnam Memorial and the dustoff picture.vietnam, vietnam war, diamond valley vietnam veterans sub branch, memorabilia

Naming and commissioning of the HMAS Melbourne Friday 29th October 1955Fold out programme- cream colour with photograph of ship and timing of the ceremony. Rectangular shape.Photograph of HMAS Melbourne “Form of Ceremony For Naming and Commisioning HMAS Melbourne On Friday, 28TH October 1955 Naval Construction works Vicker- Armstrongs (shipbuilder) Ltd Barrow-in- Furnesshmas melbourne, naming and commissioning hmas melbourne

This patch is one of two patches attached to the interior underarm seams of jacket 0033.1, as a means of reducing staining from sweat of the wearer.Oval shaped patch formed from four pieces of material (four semicircles), overlocked around the circumference in cream stiching. Patches are cream in colour with brown staining throughout. Patches are cotton on one side and a resistant/treated fabric on the reverse. summer uniform, sweat pad, military uniform

This patch is one of two patches attached to the interior underarm seams of jacket 0033.1, as a means of reducing staining from sweat of the wearer.Oval shaped patch formed from four pieces of material (four semicircles), overlocked around the circumference in cream stiching. Patches are cream in colour with brown staining throughout. Patches are cotton on one side and a resistant/treated fabric on the reverse. summer uniform, sweat pad, military uniform